Rental Billing Discrepancies for Replacement Router

All indications from Verizon's website and automated emails indicate I will be paying an additional $9.99 monthly rent on a FiOS Quantum Gateway router. The Verizon representative directed me during on-line chat to select it as a replacement for my original M1424WR router (owned by Verizon) which appears to be failing.
During the replacement ordering process Verizon's representative stated there would be no increase in monthly charges. However, every other indication from Verizon previous to and subsequent to the replacement request indicates my bill wil increase by $9.99 plus $0.60 Taxes and Fees etc.
I am waiting for the replacement router to arrive along with a return box and label for the old router.
There should be no discrepancy between the emailed billing estimates and what I was told during the process of ordering a replacement router.

I have just received my first bill after Verizon sent me one Verizon-owned router to replace another Verizon-owned router. Nothing has changed with my service.
Contrary to what I was told by a Verizon representative, my monthly bill has increased by $9.99.
I hope it's also understood that a customer must sometimes trust a company representative when they guide the customer through an ordering mechanism not designed to support a particular transaction, with the understanding that all will be corrected offline.

Similar Messages

  • Deskjet 6988 replacing router

    Replacing very old router in network that had Deskjet 6988 connected wirelessly (this printer is 2 years old).  No problem getting network up.  But the printer not so easy!  The 6988 doesn't have fancy welcome back wizards, etc., menus from the printer, etc.  Has just the little icon that shows network connection, little icon that shows  wireless on.  Following instructions for replacing router involves using ethernet cables to communicate first, then removing. 
    Have followed this multiple times -- the icons show nice steady light like it is connected -- but it does not print, get the "print spooler is unable to connect to your printer" message.  Have tried turning off firewalls during installation, different security settings, still can't get it up.  Desk is littered with printouts from printer of network settings etc. which show the wireless is connected.
    I think it also ought to show up in the router listings of attached devices -- but I don't think it does. (Can't actually get it to print with the Ethernet as the connection either.)  I kind of remember having a similar hard time with it originally, but then it was under warranty.
    This question was solved.
    View Solution.

    Here is the link to the manual page.  Look in the Networking Guide.
    I would recommend resetting the printer to factory defaults (page 10), then follow the new printer install instructions.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • FIOS Router Replacement - Is it leased (no charge for replacement)?

    Hi all,
    All's working good, no problems but I was curious about the procedure for replacing a defective Router Unit.  I have the Westell Model A90-9100M15-10 (91OOEM) model Coax/Ethernet Router unit.
    Is there an additional fee for obtaining a replacement?  Are these Routers leased, ie, cost included in my monthly Verizon FIOS bill?
    If I needed to order a replacement Router, is the shipping turnaround time usually 1 day?
    Can these Routers be obtained at a local Verizon outlet store?  I'm located near one of those stores.
    Solved!
    Go to Solution.

    The router is not leased.  There is no monthly charge for it.
    Over the years, VZ's policy regard the router has changed several times, so it depends on when you got the router.
    1)  Originally VZ gave away the router.
    2)  Then VZ stated charging for the router, but issuing a credit for the amount of the charge resulting in a net cost of $0.
    3)  Now VZ says they own the router.
    In any case, VZ will replace a faulty router at no charge.  They may or may not want the old router back depending on it's age.
    Shipping turnaround on a replacement router is very fast.  Whether you get it in one day depends on when you order it.
    Yes, you should be able to obtain a replacement router at a VZ store.

  • Rental Billing for Consignment fillup.

    Hi Gurus ,
    There is a scenario in a consignment process for which i need help
    1) I am creating a consignment process where the consignment fill-up requires to be coupled with rental billing.  In such a case whenever i am doing a consignment fill up for the customer i charge a rent for it  till the time the consignment issue does not happen .
    What i have done :
    a) For consignment fill up i have used the document type KB and copied it and used F2 for order related billing  in the new copied document
    b) And also used the item category KBN copied it and created a new on.
    c) created a rental billing plan
    d) Assigned it to sales document.
    No after i create the order and use VF04 to generate the bill it says bill not generated and when i go to logs it reads that item category and document cannot be invoiced with billing type F2 .
    I dont understand the reason why as i have made all the configurationd .
    Request you to please help me
    Regards
    zahid

    Hi Zahid,
    I hope whenever you want to rent out the material / product it is for some period or it should have some time limit. - correct me if I am wrong.
    so it is like a contract for the rent out the product.
    If it is so, I would like to suggest you to create a contact for rental and do the contact related billing.
    and use the Consignment document types KB and KA for keeping a tract of material lying with the customer.
    Regards,
    Pankaj

  • Billed twice for movie rental

    I was billed twice for a movie rental. Same day, same time. How can I get one of the rental charges reversed?

    Click here and ask the iTunes Store staff for assistance; if the second charge was to a credit card, you can also contact the card's issuer and dispute it.
    (117939)

  • Billed twice for movie rental and requesting credit?

    Billed twice for a movie rental and requesting credit.  How do I request credit please?

    Click here and ask the iTunes Store staff for a refund.
    (113499)

  • Report for the cost for replacing the defective goods free of cost

    hi guru's,
      iam having the qury that iwant to create a report for the free of cost .For the senario that company wants the report for replacing the defective goods free of cost .pls help me out .IN SD module
    Edited by: joe mm on May 13, 2008 3:35 PM

    Dear joe
    I am sure, for giving free of cost, you should be having different document types like sale order for free goods, billing with no value.  So thru VF05, by selecting the billing document type, you can generate a report.
    thanks
    G. Lakshmipathi

  • Suggestions for new router/switch

    I have a wired Ethernet network in my office, and have been using a Linksys BEFSR81 router with it since installation. The following machines are connected:
    MacPro early 2009 OSX.5.7
    G5 2.0 dual OSX.5.7
    iMac flat panel 700 mHz OSX.4.11 (2 identical machines)
    HP 2300n printer
    Brother multifunction printer/fax/copier
    The router is dying and needs to be replaced. The whole network is hard wired but I could use a wireless router (e.g. Linksys WRT310) with a switch (I need at least 6-7 ports total. The selection of wired-only routers is very limited; what would people suggest for replacing the Linksys BEFSR81?

    Check these pages out first on how to install. NOTE, to look for the"GL" version, as the G, GL, GS, GX are all on the same page.
    http://www.dd-wrt.com/wiki/index.php/Installation
    http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX
    http://www.dd-wrt.com/wiki/index.php/Index:FAQ
    For the GL, you need to flash 2 firmwares initially in the beginning.
    You first need to flash a mini generic (or micro); just go with mini, to the router first. Then after the mini is installed, flash the standard generic.
    To easily find the right versions. Go to the dd-wrt homepage, and then look for the tab that says "supported hardware". Click on that and type in: WRT54GL (which is your router name, the one I recommended). The model GL model will show up, and click on it. There you will have all the firmwares that can be used with the WRT54GL.
    There are a few different ones, but the ones you need to download are the "mini generic" AND "standard generic" (non-usb standard generic, if you're connecting through ethernet. Only if you use usb to connect to the internet then the usb version). Look at the file name to confirm.
    Flash mini first, then standard second. And you only have to do this once.
    Make sure to read through the above installation guide carefully, and just basically take your time. Some things to look out for are mainly just 2 things:
    (1) Doing 30/30/30 hard-resets before AND after flashing.
    (2) Use Internet Explorer to do the initial flash. DO NOT use firefox (maybe not even safari). This is only for the initial flash with the linksys firmware on. Once dd-wrt firmware is on, any browser will do. This is in the install guide, but basically any PC with IE will do fine. If you don't have access to a PC, you can even use the "old" IE for mac. That will work too.
    Again just take your time, read things, and double check them. It's actually a very easy process after you've done it once.
    Reply back if you need any help

  • VTFL transaction - multiple billing documents for same delivery

    Hi all,
            Iam using the transaction VTFL for Order, Delivery and Billing. When the routines 03 and 04 are used, we need to ignore POD ( Proof Of Delivery ). So, for this,  I have used routines 09 and 10. POD issue is resolved. But another issue is raising. When I generate the billing document for the delivery, multiple billing documents are generating. I mean, for some delivery, if already a billing document is created, when we again try to generate the billing document ( VF01 ) for the same delivery or order, it is generating the different billing document.  I need to control this.
    Please guide me in this regard,
    Thanking you,
    Regards,
    Murali Krishna T

    Pl. check delivery for incompleteness, if delivery is incomplete then shippment is not allowing delivery, Check route, vehicle number, vehicle details.
    Hope this will help u.
    Jyotsna

  • Billing date= PGI date + Route time

    Hi,
    We have a scenario where it takes 7 days to transport the material from location A to B. for e.g. The PGI is done on 11th Aug and material will be delivered by 18th but the Billing document is created on 11th. How can we control the billing date except Billing block and POD relevance indicators.
    we want to have the Billing date= PGI date + route time

    issue resolved.
    How ??
    It is almost one year since you raised your last query and now this thread is closed without any updation which is not necessary to do so.  You could have just clicked the Answered button.
    thanks
    G. Lakshmipathi

  • Line rental bill query

    I have 2 bills come thorugh the post i have since set up a DD,will this take care of both, one bill is for line rental and the other one is my broadband,i dont want to get into arrears with my bill,one is around £180 and the line rental one is around £60,i have set up a DD that takes £79 monthly,thanks. 

    Hi vincent,
    If you have two separate accounts you'll need to set up two separate direct debits (one for the line and the other for the broadband). You can set this up online if you have an eBilling account, all you need to do is log into www.bt.com/youraccount.
    If you'd like me to check anything drop me an email at [email protected]
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HT1415 was billed twive for same movie in a 6-7 hr period how do i fix

    i was billed twice for a movie today that i tryed to down load twice (rent). It clearly tells you you can watch a rental as many times in 24 hrs. as you want. what do I do now???

    You can watch it as many times as you like during those 24 hours, but you only get one download for a rental. You can try the 'report a problem' page to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Wireless Extender or Replacement Router?

    Hi all
    I have a BT HH3. In parts of my house I can't get a wireless connection and realistically I can't run Ethernet cables upstairs.
    I've been looking at wireless extenders but I wondered if just a replacement router would solve my range issue? Has anyone looked into this and if so which router might be recommended? Also if I could still expect BT Vision to work with anything other than a HH?
    Many thanks
    Solved!
    Go to Solution.

    dk1uk wrote:
    Many thanks for the reply. My HH3 is Version B. Is the powerline extender not an option then?
    If it is still an option, how does it work - what I mean to ask is how does it 'talk' to my HH?
    Thanks again.
    Extenders do not work properly with the version B, if you try and roam between the home hub, and the extender wifi network.
    Once you connect to the extender network, you will not be able to connect back to the HH3B wifi network, unless you turn off the extender, and wait a few minutes.
    A universal wireless repeater will work, as it isolates the device MAC address.
    There is one solution on this page.
    Increasing wireless range using a TP-Link TL-WA701ND
    You need to use the wireless repeater option.
    Or, one from the BT Shop
    http://www.shop.bt.com/products/tp-link-300mbps-universal-wireless-n-range-extender-8GC4.html
    There is a thread about it here.
    http://community.bt.com/t5/Other-BB-Queries/Home-Hub-4-and-TP-Link-WA850RE-Extender/m-p/966298#M5987...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Advertise implicit-null label for static routes

    Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.
    We need to do this is because somehow we need to do rate-limit on the PE interface connecting to the core network instead of the interface connecting to CE. As the incoming packets still got labelled, the rate-limit is skipped. So we want to stop the PE creates label for the static routes or advertises them with implicit null label. Thanks in advance.

    Calvin,
    Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for " as Shivlu suggested.
    Regards,

  • Report for replacement stock to be recived from vendor

    Hi
    I HAVE ONE ISSUE ON ABOUT VENDOR REPLACEMENT STOCK REPORT
    EX:.. i have done GR for material-A qty 100...and ihave done MIRO for this ..pur.order..
    after 20 days i have return the materai-A ..qty 25..(without cancel the MIRO) with movement tuype 122..but this material should be return from vedor.(subsequent deliver).after some days or weeks ..( bcoz money has already paid to vendor)...like this we many materials ..
    for this... i want report for replacement material will be recived from vendor
    regards
    sesidhar

    Hi
    already i have done MIRO..
    then return to vendor qty 25..(through MIRO...w/o creadit memo
    thne again recive the replacement material ..through MIGO (subsequent delivery)
    in this case ..need to create credit memo..?
    if yes.. pls...send me procedure.
    regards
    sesidhar

Maybe you are looking for

  • Missing files - iTunes using wrong path, how can I change it?

    Hi, I store my itunes library on an external hard drive and I have over 1000 music files which itunes cannot locate even though they are there. Having done a bit of research I've discovered that the path for these files is incorrect. The path in "Get

  • I can't get Finder v. 10.6.8 to work. I have a MacBook Pro with OSX v. 10.6.8.

    I recently had a hard drive crash. The tech installed a new hard drive and I was able to re-download most of the applications I use. Now, several weeks later, my Finder no longer works. I also can't open any document folders that are on my desktop. I

  • Move is card from iPhone 4 to another iPhone 4

    So recently my iPhone 4 crashed and died so I borrowed my moms old phone and we went to AT&T and got a new SIM card so I could use it which wasn't an iPhone.  My friend have me their iPhone 4 since she got an iPhone 5 and it is the same carrier. I pu

  • Customer Balances Report problem?

    Hi, I am facing some problem it may have been discussed before but it is urgent so I am posting it. 1) User wants to see the S_ALR_87012172 - Customer Balances in Local Currency on daily basis or any report which is similar to that. As far as I know

  • I can't change the sender/receiver name on my email

    This seems like a simple problem, but I can't solve it.  On my email, I send a message and it shows my wife's name as sender on the recipient's received email. I thought it was caused by my wife's entry in the Address Book showing our email address,