REP-1276 ERROR MESSAGE

I am trying to move a database column value into a placeholder to manipulate later. I get the following error: REP-1276 'Placeholder<name> references one or more non-formula columns'.
Here is the script:
function PH_F_UNB_OBLIGFormula return Number is
begin
:ph_f_unb_oblig := :unb_oblig;
return(:ph_f_unb_oblig);
end;
null

fist of all, inside placeholder object is not allow to insert code, only save values from any function or formula, please test with formula column
I hope, it could be useful for you.
null

Similar Messages

REP-1920 Error Message

Our project has reports that fail with the following error message:
REP-1920: Character mode runtime incompatible with
DESFORMAT of PDF, HTML, HTMLCSS, or RTF.
It is not always the same reports that receive the above message, it appears to be random in nature. Indeed, the vast majority of time these reports run with no errors at all. All of a sudden, out of the blue, certain reports (no pattern, it could be any of our reports) will fail with the REP-1920 error message.
To make matters worse, NONE of our reports are in CHARACTER mode. All have an initial value of DEFAULT (i.e. BITMAP). Now we do have one report that generates a CHARACTER report dynamically, by passing a paramter at runtime, but that report (the .rdf) has a DEFAULT mode as well, and is run off of a different report server than all the other reports.
I have scoured the NET and have not found anything that can tell me why we are receiving these error messages. Anybody?
Note: We are running Report Server 6i Patch 10 (6.0.8.19.0) on a Windows 2000 box. Dev Tools are Patch 10 as well.
Thanks
James Walters

Hi James,
We have never heard of this issue before. We can undeerstand the REP error if there is some contradiction in Report request between deformat and the mode. But since you told this happens once in a while, that too randomly, it seems, wrong message is being displayed. I suggest you get in contact with Oracle support on this issue. This need to be looked into.
Thanks,
Rohit

REP-1814 error message

Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.

never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita.

REP-3000 Error Message

I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message:
REP-3000: Internal error starting Oracle Toolkit.
Tell me please, what can i do.

You may be right. But in this case i don't know another plase, there nls-support (*.nlb) files are may be installd. In my $ORACLE_HOME there are no directory, naming like datad2k. I think, that Developer 2k use nls-support files from base nls directory, because i install if after RDBMS, but after installation of Developer 2k in the list of installed products i so, that it content the 8.0.6 NLS-Support Files and Libraris. I in the firm belief that it is not RDBMS files, becouse the version of RDBMS is 8.0.5.
It meens, that the cause of REP-3000 error is other. If you know some more about it, tell me please.
null

REP- 1276 error

guys ,
i am getting error in oracle apps, pls suggest me what to do ?
here is my case . i have created placeholder column inside formula column and have written plsql code inside formula column. and following error is shown in apps side
''REP-1276: Placeholder 'CF_Customer_Adress' references one or more non-formula columns.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1276: Placeholder 'CF_Customer_Adress' references one or more non-formula columns"
thanks in advance.

Uvaraja wrote:
Hussein please dont give me any id . I dont have access to check that, since i dont have oracle ID.Sorry, I cannot post the contents of MOS docs since this violates Oracle support agreement policy.
Thanks,
Hussein

Rep=2103 error message in oracle 10g

Hi After migrating from 6i to 10g I am getting the following msg when I try to generate a report:
rep-2103: column 'cf_street_address' : pl/sql formula returned invalid value or no value
I have the following code in my function:
function CF_street_addressFormula return VARCHAR2 is
begin
return(:address_line_1||' '||:address_line_2||' '||:address_line_3||' '||:address_line_4);
end;
Please help.

I'm using Reports 9.0.4.0.19 and I recreated the scenario without any issues. I'm just wondering what would happen if you wrapped the :address_lines in nvl's in case 10g cares.
return(nvl(:address_line_1,' ')||' '||nvl(:address_line_2,' ')||' '||nvl(:address_line_3,' ')||' '||nvl(:address_line_4,' '));
Sorry, I could reproduce the problem.
-mike

Imported image error - REP-6106: Error in XML Report Definition

I created a report with an image using Insert/Image. I've tried bmp, gif, jpg. The reports works fine so I save it. When I reopen this file, I get the REP-6106 error message "Invalid element 'image' in content of 'repeatingFrame'. expected elements [comments, geometryinfo...etc.....]".
Any ideas?
Thanks,
Albert

This is a bug, I have filed bug 2546295 to track this.
Thanks for finding this.
-Shaun

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

REP-1849 HELP! Reports 6i runtime error message REP-1849

Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les Briesemeister

We have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance

Error Message: REP-0606

Hi,
I got a error message in Report 6i:
REP-0606: unable to read link file 'I:\0\ABC.JPG'. check link file format.
How do I check the link file format?
Thanks.
Jun

Hi Jun,
This error doesn't come for all JPGs.
You can try the following :
1) Use an Image Editor/Converter to save the file.
In this case, use some Image Editor, and SAVE the file AS the same/or different filename. This should mostly resolve your problem.
2)Load image into OLE item.
Thanks,
Vinod

REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*

REP-56071: Security check failed with error message

Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras Weintrauth

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

Using 4.0.2, strange error message when trying to created a webi rep

Hi all
I'm getting the error message Protocol message end-group tag did not match expected tag. (WIS 00000) while trying to create a webi report using a unx (Designer Information Design tool)
full error test below
This unx is using a 7.1 BW cube, and from the unx toll all looks to be ok
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Protocol message end-group tag did not match expected tag.
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
     at javax.swing.SwingWorker$1.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at javax.swing.SwingWorker.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.businessobjects.sdk.core.server.ServerException: Protocol message end-group tag did not match expected tag.
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
     ... 18 more

You can still create universe, just not UNX universe.
If you have upgraded Bi4.0 to Sp01 or SP02 - in IDT it will not let you do that.
As for docs :
/people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
http://smartdirectory.sap.corp:3080/Assets/asset.epx?id=519f2955-0b47-4a0f-81d1-84e8e5303e5e
http://www.asugnews.com/2011/02/22/sap-businessobjects-bw-integration-to-get-easier-in-bi-4-0/
https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/139619-38-87308/SDN%20-%20Best%
/people/ingo.hilgefort/blog/2011/02/10/sap-integration-update-part-5--web-intelligence-40-connecting-to-bex-queries

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

REP-1276 ERROR MESSAGE

Similar Messages

Maybe you are looking for