Repeat a DELTA from a DSO to InfoCube

I have a process chain that runs once a month, so it ran 2 days ago and loaded everything perfectly. One of the steps is a DELTA loads from a DSO to InfoCube. Today i transported some changes to the PROD system with changes to my Infocube (added 2 new infoobjects and to the modified the Update Rules to fill these new infoobjects). So now i have to wait a whole month to have a data in my new infoobjects.
The question is, is there a way to repeat the last DELTA from DSO to InfoCube so the DELTA would pass throuhg my new Update Rules and would fill the new infoobjects in my InfoCube.
I considered the option of deleting the needed request and then launch the Restructuring, but there no PSA, so if i delete the request i won't be able to recover it again.
Any thoughts?

Hi ,
1. If ur facing any problem while changing the statu of the request in CUBE, just delete the request from the cube .
2. Go to ODS and see data mart status is there are not, if still exists manually delete it( click on data mart status, it will open small window, click on DELETE button)
3.  copy this ODS name
4. goto datasources  in Modeling
5. search for the datasrc it shud be prefixed with ' 8 ' and ODSNAME.
6. Under that select Infopackage for delta update, trigger this Infopackage .
7. it will load to CUBE AND Datamart status also update.
Hope it will help .
Cheers
Leena

Similar Messages

  • Delta Load on DSO and Infocube

    Hi All,
            I would like to know the procedure for the scenario mentioned below.
    Example Scenario:
    I have created a DSO with 10 characteristics and 3 keyfigure. i have got 10 Customers whose transactions are happening everyday. A full upload on the DSO was done on 7th October 09. How can i load their changing data's from 8th Oct to till date to DSO? and what will be the situation for the same in the case of Infocube??
    Step by step guidance will be a great help
    Thanks in advance
    Liquid

    Hi,
    The key-fields take an important role at DSO level alone as you get the power of overwritting records. Once thats done at the DSO level you can simply carry on with a Delta load into the cube from your Change Log table and you don't have to worry about anything. Just to add, all the characteristics in the cube are key-fields so you will get a new records for each different value only the key-figures will sum up for a set of all the same characteristics.
    Thanks,
    Arminder

  • Delta loading procedure from Write Optimized DSO to Infocube

    Hi All,
    We are using Write optimized DSO in our project to which I am loading data using Standard DSO 0FI_GL_12
    From Write optimized DSO, we are loading delta records into Infocube, please provide your inputs to my following questionnaire:
    1) I am quite interested to know how the delta records gets loaded into infocube whenever we are using 'Write optimized DSO' as we don't have any image concept in Optimized DSO
    Ex: If am using Standard DSO, we have Change log table and image concept will allow to get updated value to Cube
    let us assume
    Active Table
    111            50
    111            70 (overwrite)
    Change Log Table
    111            -50        (X -- Before Image)
    111             70    ( '  ' -- After Image) symbol for after image is 'Space'
    So if we load this record to the target as a delta the above two records from change log table will get loaded to the CUBE and Cube will have 70 as the updated record
    If am using 'Write Optimized',
    Active Table
    111            50
    111            70 (overwrite)
    When this record loaded to the cube, as Info Cube is always having 'Additive' feature so the total value will 50+70 =120 which is wrong?
    Correct me what feature will work here to get updated value as '70' into Cube from Write Optimized DSO'
    2)As the data source is delta capable and having  'ADDITIVE' delta process, only the delta records based on REQUEST ID are loaded into Info Cube with the  updated key figure value?
    Thanks for your inputs and much appreciated.
    Regards,
    Madhu

    Hi Madhu,
    In best practice, we use WODSO in Initial layer and then Standard DSO. Just for mass data load/staging purpose.
    In best practice : Data source ----> WODSO ---> std. DSO
    In your case : Data source ----> Std.DSO  -----> WODSO.
    In both cases if data load design is not in accurate way, then your cube will have incorrect entries.
    For ex:  today 9 am : 111,  50  (in active table)
    Data load to cube, same day 11 am : then cube will have 111    50.
    Same day, value got changed  in std. DSO  1 pm :   111   70(over write function @ active table).
    Same day/next day if you load data to cube, it will have 2 records one is with value 50 and other would be 70.  So to avoid such scenarios we should plan load in accurate way.  Else make change your DTP settings as  ‘source table : change log table.
    Coming to your case:
    Once after the load to Std. DSO, load data to WODSO by changing the DTP settings ‘Delta Init.Extraction from’  : Change log.
    Now data available @WODSO from change log table, then you load to cube In delta mode.

  • Problem in transfering data from DSO to InfoCube

    Hi,
    I am trying to transfer data from DSO to Infocube. But it is giving the following message.
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    It is not allowing to load data to InfoCube from DSO. I checked the request number. But there is no request number in InfoCube. If request no is there I can delete the request from InfoCube and delete the data mart status in DSO and reload again.But there is no request id in IC. So plz guide me how I can tranfer data to InfoCube overcoming this problem.
    Actually further updata was running from DSO to IC. But it failed. Executing Function Module : RSPC_PROCESS_FINISH, I set the chain  green before loading
    data to InfoCube. So it starts executing the next chain. So there is no request id. So plz guide me how I can retain this request id.
    Edited by: Purushotham Reddy on Jan 28, 2008 11:19 AM

    Hi Reddy,
    Make the QM Status Red of the failed request even if it is red.
    and then run the same infopackage used in the chain. This will ask for repeat of last delta.
    If this process is understood to u then its fine otherwise read below:
    the other option is check if this failed request is present in PSA. If it is present in PSA then update the failed request from PSA, here u wont need to do a repeat of last delta. This Option is easier. this u can do from the ,manage tab of the data source I think this u might be surely knowing....
    Assign Points if it helps u.....
    Thanks,
    Nagesh.

  • How does the Delta functionality works while updating Infocube from PA

    Hi Gurus
    How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
    As I have weekly based planning, every week we have to update the forecast into the Cube. If I update  every week into the Cube , then the values are going to append  in the Info cube.
    Shall I create ODS in between the Planning area  and the Info cube .
    (or)
    Any other method ?
    Please Suggest.

    Hi Preetham,
    Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
    if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
    regards
    ravi

  • Repeat delta from ODS to Cube.

    Hello All,
    The data is coming from ODS to InfoCube...
    Load for 24.05, 25.05 and 26.05 is successfully uploaded in ODS (full Upload) from R/3 system.
    But the load for date 25.05 failed in InfoCube due to invalid chs. in one of the field.
    The infocube is Z_CAD (Delta upload) and is fetching data from ODS Z_AD.
    How do I make sure that I delete the request in InfoCube. and repeat the load from ODS for 25.05 and 26.05.
    Kindly explain step wise.
    I also have to make sure that the data mart status is set for further loads.
    Kindly reply.
    Regards,
    Nikekab

    Hi,
    Since your data is available in ODS.
    Delete the request for that day from Cube by making the request red in both Manage and Monitor screen.
    Then rectify the invalid characters issue either by maintaining it in Tcode RSKC or by writing routine for it.
    Then you can do a reconstruction as the reconstruction tab will available in the  manage screen.
    Kindly let me know in case further details are required.
    Thanks,
    Amit Kr.

  • Data is not coming correctly through delta from DSO to Cube

    HI All,
    When there is change in Org. Unit, Job or any characteristic of employee then the the delta of data source picks that change records.
    I have used DSO before Cube. Now in DSO active table have one record against the Employee and same Schedule hours as ECC have.
    But while loading to the cube, this data of schedule hours will get added to existing schedule hours  of Cube , which makes the schedule hours double for that Employee. For exmaple.
    DSO Data.
    Emp NO.     Date Org. Unit     Sch. Hrs
    1                    ABC                              16
    CUBE Data
    Emp NO.     Org. Unit     Sch. Hrs
    1                    ABC               16
    Now Employee Org. Unit get changed to XYZ.
    DSO Data.
    Emp NO.     Org. Unit     Sch. Hrs
    1                    XYZ               16
    CUBE Data
    Emp NO.     Org. Unit     Sch. Hrs
    1                    ABC               16
    1                    XYZ               16
    I need data as it is in the DSO.
    Please help, thanks in advance.
    Arvind

    Hi Arvind,
    DSO and Infocube works different for char values......you can define Key Fields in DSO...
    whereas in Infocube each Characteristic value work as Key Field.....that's the reason if there is any change in any characteristic value ...
    DSO Active data will not change if Key field has not change..... the newly updated Data field value will be available in DSO Active Table.....whereas in Infocube... it will create a new entry......
    In order to get the updated value each time you need to explore some other options .....like complete deletion of Info cube data and full load everyday.......
    Other options depends on design and data volume and other parameters.
    Hope this helps........
    Regards
    Mayank

  • Data not loading for new Fields InfoObjects from DSO to InfoCube

    Hi Gurus -
                   I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
    Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
    Here is the New Scenation:
         DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
    I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
    I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
    But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
    Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
    -Sonali

    Hi,
    Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
    The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
    Regards,
    Mani

  • Unable to consolidate data from two DSOs into an InfoCube for reporting.

    Hello Experts
    I am working on BW 7.0 to create BEx Report as below:
    This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
    Below are the screenshots of these 2 DSOs:
    I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
    All the testing is done using only one Sales Document No (VBELN).
    First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
    Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
    ZCOPA_01                    ZSD_DS18
    0REFER_DOC  <->        0BILL_NUM
    0REFER_ITM    <->        0BILL_ITEM
    0ME_ORDER    <->        0DOC_NUMBER
    0ME_ITEM        <->        0S_ORD_ITEM
    51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
    When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
    Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
    Thank you very much in advance and your help is appreciated.
    Thanks,
    Chandu

    in your (current) InfoCube setup, you could work with "constant selection" on the key figures
    for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
    for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

  • Issue while loading of data from DSO to InfoCube

    Hi Experts,
    Can you tell me what might root casue if data is coming into DSO from R3 its correct and fine as required but while loading it to InfoCube from DSO its showing wrong data like some of Line Items that were closed were shown open in Cube AND also KF values were not right
    Also there is no Routine code involved b/w DSO and InfoCube.
    Thanks in adv .
    NP

    Hope you didnt delete some req from DSO without deleting change log . This might cause inconsistency.
    If so , delete data from dso by right click delete data  and reload .

  • Error while creating transformation from DSO to InfoCube

    Hi Gurus,
       When i am creating tranformation from DSO to InfoCube getting an error,        " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is  assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value   
    '8.50 ' "
    ZAMT_PLC is created with 0CURRENCY.
    On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
    I want to know why is this we need to have value for 0Currency field???
    Thanks & Regards,
    Anup

    Hello Anup,
    If you load a key figure which has a unit assigned to it,
    then for every records where the key figure has a valid value
    (value 0) the corresponding unit has to be delivered as well.
    Additionally please check note 1366474 regarding the RSTRAN 312
    error message:
    "The corrections contained in Note 1165168 are incomplete.
    Depending on the sequence during loading, the system may not issue error
    message RSTRAN 312 even though data regarding the assigned unit or
    currency "space" is incorrect."
    This means actually, that the system should have issued the RSTRAN312
    error message even before the upgrade, but for some reason this
    check found no issues in some constellations. This means furthermore
    that your system behaved incorrectly in the past, that this
    error message was not triggered if you loaded key figures without
    any unit.
    I'm sorry to tell you, but the system behaves and works as designed
    as it should be even before the correction from note 1366474.
    Please change your transformations for key figures which
    have a unit assigned, that the unit field is filled correctly.
    with the corresponding units, otherwise the system will abort
    the processing of the data with the above mentioned error
    message.
    Best Regards,
    Des

  • Error while loading data from DSO to Infocube for 0Fiscvarnt

    Hi All,
    Could you please help me  any one to resolve the below error.
    *"Fixed value discrepancy with InfoObject 0FISCVARNT value 'K4 ', expected 'K2 "  (MessageClass RSAU).
    We have two  Staging DSO's upto Second level DSO FiscalyearVariant  both K2 and K4 updating, but second level DSO to infocube data loading we had a above problem. all are direct mapping, no routiunes or constants at all transformation level.
    But we checked R/3 side both K2 and K4 variants are available.
    Thanks,
    Ramesh

    Hi,
    It's a constant issue I met before. I guess you have assigned a constant value K2 in your target ODS.
    Please change the constant back. Go to RSA1, change target ODS, find 0FISCVARNT, right click it and choose 'Provider-specific Properties', remove K2 from 'Constant'.
    Now try the reload and I'm sure no more issues. If you really want the constant then you have to change data or transformation.
    p.s. Don't forget re-activating transformations and DTP
    Regards,
    Frank
    Edited by: Frank Lee on Jul 14, 2009 3:13 PM

  • Error in uploading data from DSO to Infocube in 3.5(rsa1old)

    While uploading data from DSO to Infocube, I selected Initial update option
    In schedule tab when I clicked start, an error occured it says:
    Delete init request
    REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
    init. again with same selection.
    Can anyone let me know how should I delete that request.
    Thanks,
    Soujanya.

    Hi,
    Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go  to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
    Regards,
    JD Datuin

  • Is delta possible for DSO from Master Data InfoObject?

    Hi,
       I am loading MD Infoobj. from Data Source. Now I have to send the data from MD InfoObject to DSO. Now i need DELTA from InfoObj. to DSO.
        Is it possible? Then how it works? please explain it breafly. My scenario is like,
                                                                                    here I need Delta, is it possible?
    DS(ECC)--> MD InfoObject--
    > DSO
    Thank you,
    VCREDDY>

    Hi,
    I think generally if a delta load is done, the changes would be captured in the change log.
    What exactly is your requirement?
    The way it works is
    New record flows from master to dso.
    if next, the same object value changes in the master,
    in the next load the delete image would come in the dso
    and then the new image would come in.
    I believe this is the way it works.
    Experts can correct me if i am wrong.
    Regards,
    Joe

  • Repeat the delta

    Hi,
    Our request is failed due to bad record in master data. It is cost center allocation datasource (CCA_9).
    Data Source(CCA_9) > Cube (no psa in between).
    I want to follow the following step to repeat the delta, Is that correct >
    1. go to Manage tab of cube select request in change the QM status to "not Ok" red
    2. Do I have to delete the request ( I am not sure this one because our request don't come through PSA)
    3.Do I have to make QM Status red in RSMO monitor screen status tab also ?
    4. go to infopackage and start the delta load again
    5. It will ask popu to repeat the delta.
    Please, Answer 2 and 3 steps..It really urgent production problem.
    Thanking you,
    Manas

    Hello Manas,
    Yes, you have to delete the request from the InfoCube.
    The 5 steps which you decribed are correct and sufficient. You do not have to do anything in RSA7.
    Kind regards,
    Stefan

Maybe you are looking for