Replenishment From SU Managed Bulk Storage Type

Hi Experts,
We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
Our scenario is the following:
We have a SU Managed Bulk Stype: Stype 702
We have a SU Managed Stype with Putaway Strategy "P": Stype 701
We have material 11000026 and we define the following in WM View 2:
Max Qt: 6000
Min Qt: 2000
Replenishment Qt: 3000 
Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
So far we have done the following:
Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
We assigned the SType Indicator to Material in WM View 1.
Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
(The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
Thank you,
Leonidas Oyaga

Hi Mihailo,
Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
(Before doing this, I deleted ID Point 711 from SType 701).
I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
For Instance:
Material 11000026 Stype 701
Min Qt: 2000
Max Qt: 6000
Replenishment Qt: 4000
Storage Bin Capacity in 701: 1000
When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
Best Regards,
Leonidas Oyaga

Similar Messages

  • [WM] Putaway strategy for bulk storage type SU-managed

    Hi Gurus,
    I need your help
    I have a Bulk storage type with SU-managed. I would undestand the real behaviour of putaway strategy B.
    1)  Case 1: assume that in bulk storage type there are the followed bins (rows):
    - in bin XX1 there is material AAA
    - Bin XX2 is empty
    In this situation if i receive material AAA, putaway strategy B chooses the bin XX1 by background processing - correct!
    2) Case 2: assume that in bulk storage type there are the followed bins (rows):
    - In Bin XX1 there is material AAA
    - in Bin XX2 there is material AAA
    - in Bin XX3 there is material AAA
    In this situation if i receive material AAA, i don't undestand the behaviour of putaway strategy B. Seems that the system chooses in random way the bin (XX1, XX2 and XX3).
    P.S: the storage unit type is one of default - E1.
    Can you help me?
    Thank very much

    You told
    Addn to Stock: X
    Block upon placement: empty
    Then How can you have Case 2?
    In Bin XX1 there is material AAA
    Next time also stock goes to XX1 only not XX2 unless you overwrite manually.
    What does your block strage structure looks like? i'm sorry but i don't undestand your question.
    Go to OMM4 "Define-Block struct." and look No. SUs for your St. bin type, SUT & Bulk stor Ind.

  • LT03 for Bulk Storage Types

    Dear SAP-Experts,
    we use ECC 6.0 with WM. First we create an outbound delivery with VL10a/VL01N, after that we create the TOs with the LT03. We are using storage units(SU) and one SU is one palett. When we create an outbound delivery with 2 paletts the system only created 1 TO. But I need 2 TOs. Is there something to change in the customizing? Should I use an User Exit?
    A picture what the system is doing with a bulk storage type:
    But this is what I need:
    Thanks a lot.
    Walter

    Hi Walter,
    I have never used the split profile in Bulk storage type earlier however i used TO split for other storage type and it works fine for me and i hope the same should work for bulk also.  find below the setting which is required to define the TO Split
    From the below node select --Define Profile
    Define the profile for Performance Data
    Select Profile for Transfer order splitting
    Sort profile for TO splitting
    in my opinion VLENR should work for you however there are multiple option available you can click on the match code button and have a look for other parameter
    Define the movement type,Source storage type , Destination storage type and Profile for the TO split which was define in the above steps

  • How to find bulk storage type

    hi,
    i have working on blocking bins in bulk storage type in LX05, i didnt able to find out the bulk storage type out of my all types.
    how to figure out the bulk storage type out of all types.
    regards
    muthuraman.d

    Hi
    check
    SPRO>Logistics Execution>Warehouse Management>Master Data>Define Storage Type
    In that for Bulk storage type the putaway strategy will be 'B'(Bulk storage)
    You can also check in
    SPRO>Logistics Execution>Warehouse Management>Storage Units>Strategies>Define Bulk Storage Area
    Regards
    Amuthan M
    Edited by: Amuthan M on Feb 2, 2010 10:22 AM

  • Move the stock from the raw material storage type to production storage typ

    Hi
    How to move the stock from the raw material storage type to production storage type.
    note that both stoare type be in same storage location only.
    pls reply me

    Hi Raj,
    I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
    If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
    which you could do with posting change document. This doesnt reduce your WM stock.
    If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
    this reduces your WM stock.
    hope it helps.
    Regards
    Harish

  • Zero stock check for a bulk storage type

    Hi Experts,
    We have a requirement to do the zero stock check for a bulk storage type. As a standard SAP it is not allowed to do the zero stock check for a bulk storage type. Is there any way to do this?
    Thanks & Regards
    Sanpan

    Hi Sanpan
    I am in a similar boat.
    We have a Bulk warehouse with storage types with 'B' putaway strategy. We would also like to instigate zero stock check but get the message Zero stock check not supported in bulk storage areas with storage units
    Message no. LT246
    Did you find a solution to this? Or have you coded a solution?
    Many thanks
    Adam.

  • SAP Warehouse Management change Storage Type Bin type while creating TO

    My requirement is to find an exits which allow us to change the Destination Storage Bin and storage type when creating Transfer orders through Inbound Deliveries.
    I have tried using "MWMTO003", "MWMTO004". But the problem here is that none of the funtion exits have both storage type and bin as exporting parameters.
    The exit "EXIT_SAPLL03A_001" has Destination bin (LTAP-NLPLA) as a changing parameter but not Destination storage type.
    I have activated the check box to trigger User exits using SPRO->LE->WhM->Master Data->Define Storage Type and Activate.
    I got a  BADI "LE_WM_STORAGETYPE_HU" with both Storage bin and type as changing parameters but then when I activate it and put a break point. My control never stops there.
    Kindly Suggest what is the correct User Exit required for this?
    Do i need two User Exits to change Storage Type and Storage Bin?
    Kindly provide how to approach.

    I managed to change the casetype now by
    1) Changing the corresponding SCMG_T_CASE_ATTR entry
    2) Changing the record model POID in the XML file of the case, by manually parsing and replacing the XML
    Still wondering if this is a valid approach, or if I've overlooked something...

  • SUT and Bin type Bulk storage type

    Hi experts,
                     In cofiguration i have defined for particular storage type, bin type & SUT as 10 HU's per bin.  But while doing putaway system has allowed 11 HU's.  Kindly explain me how it is happened?
    Regards
    Maria
    Edited by: Maria on Mar 15, 2011 6:53 PM
    Edited by: Maria on Mar 15, 2011 7:08 PM

    Hi,
    Is your placement strategy for the storage type "B"? Is the factor of the stacks x stack height = No of SU's?
    Regards,
    Hein

  • LP24--Replenishment for Storage Types with Random Space Management

    Hey Everyone,
    I'm new to the SAP Community Network so thanks in advance for all your input.  I've seen numerous posts that have improved my understanding of SAP already.
    My question is about LP24.  I would like to know if there is a configuration that will prevent invalid replenishment requirements from being listed with other materials that require materials staging and conversion to transfer order. 
    Here is my problem.  We have thousands of materials, with valid replenishment indicators set that are either out of stock or all stock is in the forward pick storage type already.  However, I am required to click through all of the invalid requirements to assure that I pick up my valid requirements (materials with additional stock in an overstock storage type that can be replenished to a forward pick storage type).  Is there any way to filter the invalid requirements out?
    Thanks again for all your insight. 
    Marvin

    Im facing similar situation.
    Did you got any feedback here in the forum?

  • SUT Error at TO Creation from Non-SU to SU managed Storage type

    Hi
    I am creating TO to move quants from Non-SU Manged Storage type to SU managed Storage type, but at first its giving error saying Enter SUT for storage type.  These Non-SU managed Storage types are not having SUT Check but SU Managed storage type is having SUT Check.
    I tried to update WM view-2 with SUT and palletization but still issue exists.
    I am having batch job for RLAUTA10 where TR is converted to TO but due to above issue , this batch job is getting failed.
    I am deseperately trying to find the root cause and fix this asap.  Let me know how this issue can be resolved??
    Thanks

    Like I mentioned earlier in my posts, SU's are typically not managed in interim storage types. Apparently, in this case, the PSA is an SU managed location and you are trying to move inventory from a non-SU ST to SU PSA ST. The isse that you are encountering is due to the reason that the palletization data maintained in the material master is defaulted during receipts rather than staging therefore, the SUT field in the TR remains blank. But, due to business reasons you are using SU's in PSA's then you'd have to venture into development options to include SU types during automatic converion of staging TRs into TOs.

  • WM-Backflushed materials issued from different storage type

    Hello my client has an issue in WH Service order issue
    we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
    Kindly guide me to handle this.
    Regards
    Bheema

    Hi,
    Please check  for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
    At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

  • How to delete the material records related to storage type

    Dear SAP guru's,
    I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
    Inorder to accomplish an above requirement we tried the below cases
    Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
    Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
    I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
    Please guide me with the other options.Thanks.
    Regards,
    John.

    Hi John,
    Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
    If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
    Reward if it is helpful.

  • Re: Materials stuck in Storage Type 916

    Hi all,
    I am having a situation which I am unable to figure out the cause.
    In our current environment, we have implemented SAP WM.
    Now in a normal Sales cycle (Sales Order > Delivery > Invoice), a WM TO is required to do the Picking after a Delivery Document is created.
    When a WM TO is created it picks up the stock from a Fixed bin & Storage type XYZ (based on the search strategy) & then puts it into the Storage Type 916 & Storage Bin= Delivery Document Number.
    Once the Delivery is shipped (PGI) then this stock is removed from Storage type 916. This works fine.
    However there are many deliveries which have been shipped in the system, but the stock for that material is still in 916 storage type. I am unable to understand how to go about this situation.
    Kindly guide me through the initial probe for this situation.
    Thanks
    Vinit

    Hi
    I have checked all the status.
    The Goods Movement status of the delivery is C
    Also the delivery has been invoiced.
    When I analysed the same in LT22
    TO#       Item    Material  Stor. Typ  Source Bin   Qty Unit   Plnt           Created On         Typ   Dest. Bin        Dest.target qty   
    159173   0001  Material#    009        MTS01        1    EA      US89        10/07/2009        916  0080080207             1
    168198   0001  Material#    916   0080080207    1    EA      US89         10/07/2009       009   MTS01                     1
    180051   0001  Material#    009       MTS01         1    EA      US89         10/12/2009        916 0080080207              1
    Now the 1st entry is of the WM TO when the Delivery Picking takes place.
    Then the remaining 2 TO are created by some business user using Movement type 999.
    Hence I am not sure if a transaction has triggerred it or has he done it on purpose.
    My final objective is to have this stock hanging in storage type 916 - Dyanamic bin, to move out of the system as the delivery is already shipped.
    Can anyone guide me so as to how can I acheive the same effect to the system as that of movement type 601.
    Thanks

  • Purpose of various storage types

    Hi,
    As Bulk storage type is for storing bulk materials and Hazardous material for Hazardous materials. What are the types of materials or what is the purpose of the following storage types.
    Open storage
    Fixed bin storage
    Block storage
    Shelf storage
    High rack storage
    Pallet storage
    Production supply.
    Thanks.
    Prakash

    Hello Prakash,
    The storage type is a subdivision of a warehouse complex or physical warehouse. Different storage types are identified by their warehousing technique, form of organization, or their functions.
    Here is some infomration:
    Open storage : This is the storage type where you can put material in open space (without bins), in other words you can say dumping the mateirals
    Fixed bin storage: In this storage type, each material will have fixed bin and it always goes in that fixed bin during the putaway and during ppicking.
    Block storage: Here you can put the blocked  material
    Shelf storage: This kind of storage type will have shelf with bins
    High rack storage: This is self explaination word, it will have high racks
    Pallet storage: In this storage type, you can storage pallets which can have in different sizes of pallets:
    Production supply: This is the area near to production line where you will stage material required for production.
    Hope this helps.
    Regards
    Arif Mansuri

  • Bin to bin transfer from SU managed storage type to NON SU storage type

    Hi Experts ,
    Kindly guide as how i can  perform  Bin to bin transfer from SU managed storage type to NON SU storage type
    Thanks
    Jinoy

    There is no particular technique for this. You can use single or collective method (LT01 or LT10).
    Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
    The SU number will be lost because you have moved the stock to a non SU storage type.
    Regards,
    Aroop

Maybe you are looking for

  • HDD Health: How to check it? HD Tune Pro equivalent for Mac?

    hi all, i was just wondering if there's a Mac equivalent for HD Tune Pro. it's a Windows app i use to check for errors on hard drives. i want to check if an externall 1TB HDD has any bad sectors on it before i use time machine to backup my work. i wa

  • How to create new additional independent non-duplicate desktop easy to switch ?

    Hi, I want to make second desktop that will work like mission control, but will be non-duplcate and independent, that I could easly create new folders and make icons on it, without disturbing my first desktop. Please don't tell me that is "impossible

  • Moving Away From Auto Modes

    Moving Away From Auto-Exposure    Exposure modes Auto-exposure mode on your camera does provide generally good photographs, but taking full advantage of the more advanced capabilities of your digital camera will provide even better results. Most mode

  • Read each record in an Access Database using PowerShell

    I have a fix database that I need to read each record and compare it to an issue. I'm having some issues just reading each record in the specific table, when i run the below code i just get the first entry over and over again. If somone could point m

  • Red battery showing but not charging and button not working

    My daughters iphone 3G is showing a red battery when plugged in but not charging, it always shows 20%.  Also the button isn't working, so I can't reboot.  I have plugged it into the PC and it doesn't recognise the device?? what is going on with this?