Replicate Cust Enhancements on UI Configuration to different Business Roles

Hi Fellas,
I thought this would be straight out of the book solution,
well, but it seems Im not so right .
I need some suggestions on the following issue i am facing-
I had made some custom changes to a CRM application (Creating a Service Request - SRQM_INCIDENTH, Creating
Business Opportunities - BT111H_OPPT) on a Z Business Role which has been associated as default to my User ID.
Now i have been asked to replicate the same UI screen changes to some other Z Business Roles as well.
I took the approach of creating a new UI Configuration (Copy of the exisiting UI Configuration) based on the resp. role - ZABC.
But when i logged into WEBUI with the role ZABC i did not see the view i expected.
Can you all please pour in what you think should be the way to do this job?
Folks plz pour in with quick responses as today is d last day of d mighty 2010 year !
and i certainly dont wanna pull this issue in the mightier 2011
Best Regards
Dedeepya

Hello all,
It lies resolved
Well, my earlier solution was indeed correct. just few tweaks here n there.
Wish u all SDNers a Fantabulous Year 2011.

Similar Messages

  • How can we copy an enhancement set to a different Business Role?

    Experts,
    How can we copy an enhancement set to a different Business Role?
    Currently we have an enhancement to a Business Role "SALES PRO."  How can i make the same enhancement set active for a different Business Role? ie. MARKETINGPRO.
    Thanks,

    Hi,
    it is recommended to have only one active enhancement set per client.
    For your businessrole you could use the role configuration key.
    In our system each businessrole has it´s own role configuration key. But we implemented also a BADI if no configuration is found use our company default role configuration key and only if there is also no configuration use SAP .
    Kind regards
    Manfred

  • Common technical roles in different business roles in BRM & ARM

    Hi Gurus ,
    Some help please .
    We have the following situation with BRM & ARM role provisioning .
    In BRM we have for example two business roles setup (B1 & B2). We have in these two business roles a common technical role .
    E.g. B1 (has role T1 ,T2 )  , while B2 (has roles T1 & T3) .
    in our example an user already has role B1 (with T1 & T2) assigned. The user then needs access to role B2 as well .
    Since role T1 is common in both business roles  , When an user does an request , ARM then send them a notification saying that an duplicate role exist within the request. (which they have to remove before continuing) . This is confusing the some users .
    My question is as follows. Is there a way to for the user to process the request without having the warning displayed & without having the duplicate technical role assigned ?
    So essentially , they will get access to business role B1 & B2 (but technical role T1 will not be assigned twice) ?
    Your help is greatly appreciated .
    Regards,
    AJ

    Hi AJ,
    Could you share the notification message that  ARM generates.And what about role T1 assignment.
    Is it assigned two time in user profle?
    Thanks,
    Mamoon

  • Adding logical link from a different Business Role

    Hi Gurus
    I want to add the second-level entry(complaints search page) of the Complaints & Returns work center of the standard Servicepro business role as a Navigation Bar link to an already customized IC Agent Business role. How would I achieve this in CRM 7.0?
    Thanks in advance.

    Hi Amar
    Thank you very much for your valuable inputs. I had some doubts and am explaining the detailed process below so that I'm clear as to how I can fix this.
    I selected the SRV-PRO NavBar Profile and double-clicked on Define Work Center. On the Define Work Center Overview Screen, I found the Work Center SRV-COMPL, which has the description as Complaints & Returns and LogLinkID as SRV-CPL-WC. Then, I selected SRV_COMPL and double-clicked on Define Logical Links and looked for description as Complaints: Search. I found the LogLinkID SRV-COM-SR link with the corresponding Target ID as TBT120MISC.
    Now,I copied the customized IC Agent NavBar Profile which we currently have and created a new work center by copying SRV_COMPL. On Assign Groups, I kept the SRV-CMP-SR group ID and deleted all others. Then, I assigned the newly created WorkCenter to the new copied IC Agent NavBar Profile. I'm now able to view the new work center and it launches the workcenter page, but the link to open the complaint search is not available. Is there any step that I'm missing?
    Thank you again for your help.

  • CRM WEBClient UI -The same screen-menu appears for different Business Roles

    Hi Experts,
    We are working with CRM 2007 and are facing the following problem:
    After starting the CRM WEBClient , a screen with two Business Roles appears: u2018SALESPROu2019 and u2018SERVICE PROu2019 (because in my User I have added the roles: SAP_CRM_UIU_SRV_PROFESSIONAL & SAP_CRM_UIU_SLS_PROFESSIONAL).
    I select the one of the two roles (e.g. SALESPRO) and then I choose u2018backu2019 and select the other Role (SERVICEPRO) but the same screen appears with the menu from SERVICEPRO .
    I noticed that the menu that appears has to do with which business role I select first.
    Do you have any ideas what could be the problem?
    Best Regards,
    Roula

    Hi Roula,
    In CRM 2007, the CRM Webclient doesn't have the capability to switch from one business role to another directly as you are trying to do. The only option to switch is to logoff from Webclient and login in another role.
    regards
    Srikantan

  • Modify Webclient Views for different BR roles with the same Config Key

    We have Business Roles A, B and C that are all assigned one configuration key ZCONFIG_KEY. How can we make minor changes to the views that are assigned to Business Role C without affecting the views of Business Roles A and B.
    We would like to avoid creating a new configuration key just for Business Role C as it would increase future maintainence (any changes to ZCONFIG_KEY would then have to be made again to the new configuration key for Business Role C).
    Edited by: Shahzad Asghar on May 22, 2008 2:55 PM

    Hi Shahzad,
    I would not recommend you this approach as the Config Key is the place from where you should start your UI configuration. Though you might put in some code in your getter and setter methods by saying that if this is "Role A", then do this but it would be much more of a maintenance effort as compared to creating a new config key.
    Award points if it helps
    Thanks,
    Anand

  • Call logical links with different enhancement sets on the same business role

    Hello,
    I am trying to create a business role that contain logical links with different enhancements. I know how to choose an enhancement for the business role but I can't find a way, if possible, that one business role does it.
    I know how to give an option to choose different roles for the same user, i'm looking for a way to do this in the same window
    Thanks,
    Noa

    does not matter anymore

  • Do I need to configure something different,​when I'm using SCXI-1000,​1102 and 1180, together.?

    I am wanting to use SCXI-1000 with 2 modules SCXI-1102, but I also want to access the DAQ (ni pci 6035), through the SCXI-1180, to access some Digital I/O. How can I do that? What cable type between the SCXI and DAQ (6035) do I need to use? Do I need to configure something different? When I only configure the SCXI-1000 and SCXI-1102, I use the cable with 68 pins in both extremities and I don't have problems. But when inserting SCXI-1180, a following error message it is generated:
    "Dev1" digital lines 0, 1, 2 & 4 are in use by the connected SCXI subsystem.
    It happens when observing DIGITAL I/O in Test Panel in M A X.
    thanks
    Brás

    Thanks for the information! The examples sent me, were useful, but always I use Digital functions, just after I can't perform tests with SCXI, it doesn't respond, it becomes inactive until I reset Traditional NI-DAQ Devices.What can I do to have the VI attached running well? Can you help me?
    thanks
    José Brás
    Attachments:
    E_ser_dig_test.vi ‏109 KB

  • Naming 'Cust enhancement' tab in Project Systems?

    Hi All:
    We have created Custom fields in project definition by following SPRO->Project Systems->Structures->Operative Structures->WBS->Enhancements->Create Custom Fields. Now once we have done with that, we got a new tab 'Cut. enhancement' under which all the newly added fields are appearing. We want to change the description of the tab to somehting else instead of 'Cust. enhancement'. Is this possible?

    Hi,
    Yes it is possible to Change the description.
    Pls follow the steps
    SPRO->Project Systems->Structures->Operative Structures->WBS->User Interface Settings->Layout of WBS Element Detail Screens->Define Layout of WBS Element Detail Screens->
    You can give your own title there for your respective Profile.
    Hope this helps.
    Regards,
    K.S.

  • Can CTI OS agent desktop 9 be configured for different desktop modes?

    Can CTIOS agent desktop be configured for different modes e.g. Normal, open, on top, stealth or agent selectable?

    Yes, but you'll have to customize it and recompile it. The source code is in the installer.
    david

  • How to configure 2 different SSPRs?

    Hi,
    I'd like to configure 2 different SSPRs. One for Staff and one for Students.
    I have installed SSPR onto 2 different servers, and Staff and Students have different URLs (for registration and reset).
    Staff will be the typical Q&A; while Students will be the OTP route (with auto registration).
    How do I configure the FIM Portal for 2 different scenarios, and make sure the right config is associated with the correct staff and student server & URL?
    thanks,
    sk

    Unfortunately I don't see how Staff & Student could use the same 'anonymous' Reset Portal, for the following reasons:
    Staff Reset Portal would invoke the Question & Answer activities.
    Student Reset Portal would invoke the One-Time-Password activities.
    There is no way of directing Staff or Student to the correct URL/Activity since the connection is anonymous.
    They would be directed to another password reset gates after they would type their login. For example:
    If you put DomainA\StaffUser1 in a login name on a screen, after clicking Next, you would have Q&A gate. If you put DomainB\Student30 in a login name, you would have mail-OTP activity. So you
    can differ them on one password reset page.
    Considering students don't know the domain - how would they log in to workstations without knowing it? If they would use "Domain\student" format - it would be accepted on reset page as well as
    [email protected] - both of them are accepted. DefaultDomainName
    would help here as students would not have to write domain name, but on password reset page you would still need typical "domain\user" input.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • Are iPads built with different configurations for different countries?

    Are iPads built with different configurations for different countries?

    deebeeque wrote:
    I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
    You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
    Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
    There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
    Additionally, does Brazil have 4G?
    I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

  • Document Splitting with Different Business Area

    HI
    I have a situation, where i need to create a new document type and it needs to be configured in such a way that vendor invoices and credit notes can be booked with the correct doc splitting and using different Business Areas.
    I like to know if this is possible, and if yes how.
    Earlier the client used to post the transactions, with different business areas, as we get only a warning message to reset the business area of the vendor.
    Now that we have activated New G/L accounting, with document splitting we get the warning message,
    but then the profit center will not balance, so we have an error.
    The client requires that they need to post to a different business area, and the document splitting should happen.
    Any suggestions on this will be great.

    Hi Srikanth,
    In my config setting under Document Splitting i have the Zero Balance ticked for it.
    My Scenario is as an Ex. I am debiting a G/L account for 1000, and giving Business Area X, with a cost Center which is assigned to Business Area X.
    And Crediting a Vendor for 1000 with Business Area Y.
    Will this scenario work with Document Splitting enabled, i am doubtful on this, but my client needs this.
    Can you tell me if this is a possible scnerio.
    If yes then how?

  • Error Sending proxy from 2 different business system to PI

    Hi All,
    We are trying to send the proxy to XI system from 2 different business systems. One is ECC and other is POSDM, It is successfully sent from ECC but when sending the same from POSDM we are getting following error
    "An error occurred when determining the business system (LD_ERROR)"
    We checked the RFC SAPSLDAPI, LCRSAPRFC they are in place. We have also created the type H connection from POSDM pointing to PI and from PI pointing to POSDM.
    And the In sxmb_adm of POSDM system the role is maintained as Application System and IS_URL parameter is pointing to PI, but still we are getting same error.
    Could you all experts please provide you valuable input why this error is coming and how to resolve this?
    Thanks
    Ankit

    Hi Soni,
    check your config in sxmb_adm > Integration Engine Configuration. Also run S_BCE_68001402 and check for locked users.
    Try refreshing the cache in SXI_CACHE in that system.
    Check if u r executing the report in the same client in which u have done all the settings.
    Also make sure that u have included the commit work statement after the Execute Asynchronous method call.
    regards,
    ganesh.

  • Validation require for different business area in MRO

    Dear friends
    System is allowing posting of different business area in Miro (Line item & Header item).For disallowing I have checked Validation, I think it is not usable.Please suggest me another solution.
    regds
    sachin

    Hello,
    You can use MRM_HEADER_CHECK bAdI for this validation.
    or
    You can use Enhancement (CMOD transaction) LMR1M001 -EXIT_SAPLMRMP_010 for this validation
    Regards,
    Burak

Maybe you are looking for