Replication of Business Partner Data from ECC to legacy

Hi,
My requirement is to replicate any changes made to Business Partner,should immediately get reflected in the legacy.
Which is the best method to follow.I am planning to use ABAP proxies instead of IDOCS.
As the replication needs to be immediate,Can I use ABAP Proxy.?
And for tigerring this proxy I need to enhance the code for Business Partner(BP) to call the proxy.
Is my approach correct or do I need to follow any other approach.
Regards,
Vinod Kumar.

Hi,
The approach should be based on the kind of data you want to upload in SAP. if you want to upload some standard process documents like Sales order/ purchase order then it will be good to use IDOC. As we have Standard IDOCs available in SAP to upload such document in ECC. In case you want to track the change in data from BP which is not part of any standard process then in that case you can go for ABAP proxy.
If you are using ABAP proxy you dont need to call it from BP. From BP the changes will be sent to PI (in the form of File/database Query/JMS Queues ..etc ). Then PI will call inbound proxy from ECC and post the data.
Please let me know if you have any other Qs.
Shweta.

Similar Messages

Entering Business Partner data from IC Webclient - CRM2007

Just wanted to check that if I enter Business partner data from the IC Webclient is the data stored in the CRM backend tables for example BUT000, BUT050 etc and if so is this done on the fly or a scheduled update? If not what tables are they stored in. Also can I see the same information once it is entered in the webclient via the CRM transaction BP Thanks

Hi Niten,
The tables are the same (for example: but000 for master partner data, but050 for relations, and so on...).
The data is updated when you press the respective save button, or when you press the 'end' button at telephony bar (to end an Interaction Center Interaction).
And yes, you can then check the information in BP t-code.
Just try it and see by yourself
Kind regards,
Garcia

Post Business Partner data from SBL CRM to SAP CRM

Hi CRM Gurus,
I am very new to SAP CRM. I have got an assignment wherein I will get the XML file from Siebel CRM, which will contain the "Business Partner" data.
I need to upload this data into SAP CRM by mapping all the fields available in the XML file.
Please let me know the step by step process to reach the goal.
Regards
Sandy

Sandeep, since this is a conversion related task you might want to browse http://sap.help.com and search for the so called 'XIF Adapter'. This adapter is part of SAP CRM's Middleware and provides the functionality to import and export individual objects using XML/SOAP technology.
Second option you could evaluate is BP creation through the usage of the standard BADI's that SAP delivers. Let me know whether this gets you started, Tiest.

Migration of Business Partner data, from a legacy system, does not work

Hi All,
We use a non-SAP application where our customers sign a loyalty program. The database created is replicated to CRM 7.0. However, when we create the Target Group in the Web Client UI, the number of Business Partner in CRM is different from the number of BP registered in the legacy system.
Any comment can be helpfull.!
Regards
Marí

Maria,
Please explain the way the data has been replicated,,, ( Errors in few records - answer to the mystery)
Is there any segmentation basis used while creating the target group? ( Segmentation Basis - answer to the mystery)
What are the data sources used for segmentation? ( Different query settings - answer to the mystery)
Regards,
Piyush

Listing data from ECC to legacy system??

Hello Experts,
This is my first post and hopefully in the correct forum:
We have a requirement of sending listing data (whether articles is listed or delisted) from ECC to a legacy system. We have analyzed the option os using LIKOND01, Assortment 01or WBBDLD03. We opted for LIKOND01 since it is lighter as compared to WBBDLD03. We tried to find the documents related to both of these IDocs in help.sap etc, but could not find any information accept the header and detail records. We just wanted to know how we can trigger this LIKOND01 IDoc and whether our approach will satisfy our needs.
Any information in this regard will be appreciated.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Dec 25, 2010 1:10 PM
Edited by: rakeshjain_hit on Dec 29, 2010 1:17 PM

Hello Venu,
Thanks for your reply.
LIKOND01.
We will activate the necessary change pointers and other configurations.
What we want to know that once the change pointers are activated the LIOKOND01 IDoc will be created as soon as the listing is done in ECC and entry created in WLK1 or we have to use some t-code. Can this be done?
WBBDLD03
We also tried to create the WBBDLD IDoc after creating a listing in ECC using transaction WDBU or WDBM, but could not.
Please provide your input. I have also checked BD50 (whether it is Active) and BD52 also.
Also i tried Automatic creation of Idoc of basic type WBBDLD, however i checked the FM MASTERIDOC_CREATE_WBBDLD, and when excecuting RBDMIDOC program with the messg type WBBDLD, i am getting a ABAP DUMP.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Jan 7, 2011 10:31 AM

Extraction of Business Partner data from CRM to MDM

Does MDM provide standard extractors that can be installed in CRM so that BP data can be extracted and sent to XI via IDOC.
If it does where can I find this information ?

have a look at the MDM IT scenario Configuration Guide: https://websmp110.sap-ag.de/~sapidb/011000358700004656452006E
This document describes how you setup bupa data extraction from CRM to MDM, which is actually done via Proxies and not via IDocs.
Regards
Christine

Distribution of Business Partner Data

I'm trying to determine the best method of distributing business partner data from R/3 to CRM via XI.
Under CRM 5.0 help for Distribution of Business Partner Data, there are two ways given for distributing business partner data.
1. Replication by means of the SAP NetWeaver Process Integration (XI).
2. Distribution via the ALE/IDoc interfaces.
Does anyone have an opinion on which method is best? Method 1 obviously goes through XI, but I'm not sure about method 2.
We won't be using CRM middleware, so that's not an option. We do need to implement XI.
Thanks for any advice you can provide on this subject.

Hi,
with ALE/IDOC you can also go for XI (for monitoring purposes, errror handling)
for more about IDOCs and XI
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Business Partner extract from R/3 (or SRM) to MDM without XI

Dear SAP Experts,
do you have any solution for extraction of Business Partner data from R/3 (or SRM) to MDM without XI? I know transaction mdmgx and the reference data went to the MDM well. How can I do the same for master data without XI? Please write me a step-by-step solution, if you can, because we haven't got too much time, to solve this issue.
Thanks a lot!
Best regards,
Ádá

Hi Adam,
there are different reasons for this:
1. MDMGX selects data directly from tables. Customizing tables are very simple tables, thus it was possible to implement a direct access. Master data itself is stored in distributed, multiple tables. It's not this easy to extract the data, thus MDM_CLNT_EXTR is using special extractors for the master data objects. Those object extractors are delivered by the object owners, not by the MDM group.
2. ALE IDoc and Proxy messages are the common way for data exchange between SAP systems. There are predefined IDoc and XML message types for master data. This was not the case for customizing data, so we decided to use FTP for MDMGX just as an exception.
3. The MDM data model for business partners has to combine different data models: R/3's customer and vendor with CRM's/SRM's business partner. Those models have to be combined to a general MDM Business Partner model. This requires a structural and value mapping of the different structures. Currently this is done on XI using a XSLT Message transformation.
BR Michael

How to do search of business partner data, using a message from external sy

Hi CRM Gems,
please send the answer to the following question.
1.How to do search of business partner data, using a message from external system. What FMs, BAPI etc that can be used for this functionality?
your answer will be valuble to me.
Regards,
Krishna..

Hi krishna,
Look at BAPI BAPI_BUPA_SEARCH.
Regards.
Manuel

Can we download employee data from ECC to CRM using standard middleware?

HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PV

Standard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda

Replication of Business Partner to R/3

Hi,
The Business Partner has been creeted in CRM in roles :
Business Partner,
Sold-to-Party
Bill-to-Party
Financial Services BP.
The sales area data has also been maintained with values :
Sales Organisation : Region Europe
Distribution CHannel : Europe
Sales Area : 04
Sales Sub Area : 75
Sales Segment : 07
Commercial Organization : 2900
Updating Organization : 000400
While replicating the Business Partner from CRM to R/3 system the BDoc turns to red with error :
"Entry 0400 does not exist in - check your entry".
I have checked in the entire Business Partner Data and the value 400 is maintained only in sales area data as "000400" and nowhere else this value 0400 is present in CRM.
Please assist in clearing this error so that BDoc can be replicated to R/3 system.

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Issue in transfer of data from ECC to APO

Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalitha

Hi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks.

BPC:NW - Best practices to load Transaction data from ECC to BW

I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SM

For - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected]

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Transfer z-table data from ECC to CRM via Middleware

Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
André

Hi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta

Replication of Business Partner Data from ECC to legacy

Similar Messages

Maybe you are looking for