Report data is from Cube or Aggregates ??

Hello Friends,
Can any one please tell.
The data in the BW Report is comming from a cube where Aggregates are bulid on it. The data is loading into the cube daily and roll up of aggregates are done one month back, since a month roll up was not taking place.
When i run report now which data i can see in the report only rollup data which is one month old (or) fresh updated data in the cube ??
Please tell me in detail.
Thanks in advance..
Tony
null

HI tony,
If request has not been rolled up, then it would not be available for reportin ...check roll up flag in manage of cube...
So data is coming from aggregates, if your query can access aggregates( drilldown data is avail in aggregates),..otherwise from cube...
But there would be data sync b/w cube and aggregates...
Also you can check RSRT ( display aggregates found) to check if your quer is accessing aggregates or not.
Let me knw if you hve more doubts
Gaurav

Similar Messages

After technical a upgrade no data available from cube for loading

Hello,
We are having a technical upgrade. From an ODS to cube, loading is ok. From cube to another cube is not working. The source cube contains data in tables and the export data source is extracting data in test mode. I have already activated the export data source and update rules without result. "No data availabe in the source". I'm out of ideas...please help.
BR, Auli

Auli,
Did you load new data to the first Infocube after the upgrade?
Did you check if there are any filters or conditions in your update rules? Maybe there's no data for any possible condition or filter you might be using in there.
Regards,
Luis

RE : BI APO Question Reg Data feeding from cube to Planning area.

Hi BW Experts,
iam working in an Implementation project for SCM in BW prcisely working with APO Bw..
For that I have taken historical data as a flat file and loaded it in to the external BW Infocube and its fine...
Second step I have created generate export datasource on topr of BW infocube and replicated in to Bw and used this export datasource as datasource for APO BW Infocube which is inbulit BW System from External Bw..
also I have created tranformations and data is loaded in the BW cube in APO system.Also Included Version charecterstics..
When I try to fed the APO Cube data to planning area Iam gettinga the following warning itsnot an error:
1.Key figure copy: InfoCube - planning area (DP) 01.01.2010 to 31.12.2010-- Successful
*2.No data exists for the selection made (see long text*
Diagnosis:Data could not be loaded from the Cube for the selection you made. Check whether the Cube actually contains data that is relevant for your selection.
For the second point I have time charecterstics filled in the infocube which Iam feding to a Planning area like 0CALMONTH,0CALWEEK,FiscVarnt,0CALMONTH
3.Characteristic assignment: No data copied --- Message
Can you please help me with your thoughts so that i wll try to corner the issue I will be highly obliged

Hi,
As I understood, you have loaded data from external BW cube to APO BW cube and now loading planning area from APO BW cube.
I hope your settings in /SAPAPO/TSCUBE transaction code would be correct and you have selected the correct planning version with correct cube.
Check if Data in APO BW cube is available for reporting or not and data is avilable for given selction (if any but I guess you are not giving any).
Thanks,
S

For reporting what is flow of MD and TD from CUBE and ODS

Hi Experts,
Please clarify
For reporting MD & TD data comes from cube since there is connection between these two having SID's and DIMid's.
For DSO how transaction data(TD) connects with master data(MD).
Regards,
Surya.

Good Question buddy.
When you go for ODS , there is an option in ODS settings with check box 'Bex reporting available' which creates the SIDs for Master data Objects to get them into reporting. In 2004s, with out even checking the option 'Bex reporting' we can use DSO ( which is ODS in 3.5 ) for reporting. But it involves performance risk since, it will create SIDs on the fly for master data which is time consuming.
-Sonti-

Hide all members' value for specify date from CUBE level

Hi There,<o:p></o:p>
With my current CUBE data available for yesterday, but 2-5 % data also get loaded through ETL for today as it's live data feed and process all data
at CUBE level.<o:p></o:p>
Now problem here till yesterday all data are okay and that make send to end user, but chunk of data for today (2-5 %) don’t make any sense…. now question
here is any way I can hide value for all members for today which is (2-5 %) only, that way data visible from CUBE level only till yesterday.<o:p></o:p>
Exactly what I mean if anyone connect to my CUBE they can only see data till yesterday (day-1), but not for today.<o:p></o:p>
Regards,<o:p></o:p>
Nagen<o:p></o:p>
Thanks, Nagen

Hi,
two possibilities:
1) Create a security implementation, so that the users are allowed to see the data until yesterday. Dimension Security on your Date Dimension)
2) Scope the Dimension Member for future Dates to NULL
Kr Jürgen

How to delete perviously loaded request from cube

Hi All,
I am loading a standard cube from r3 w/o PSA through DTP.
1 ) how to delete data automatically from cube w/o using Process chains.( previously we have a facility in Infopackage to delete old loaded data ) .In BI7 how to delete the same automatically.
2) How to schedule the DTP to run on daily basis( w/o process chain ) .I am not able to schedule it via RSRDA ?
What might be the reason ?
Regards
KK

Chivukula,
I'm curious as to why you aren't using the process chains. There's now a "delete overlapping request" process type within rspc.
You are right thought, the DTP does not offer a facility to delete out the old loaded data. This feature is not in BI 7.0
As for scheduling a DTP to run daily, there's no way I know of to run it daily without rspc. Yes I understand that rspc could get very messy but just create a separate holding area, say DAILY DTPS and put your DTP's in there.
Cheers,
Pom

Data load from BPC into BI 7 cubes for Bex reporting

Hi,
Can we pull BPC planning data into the BI cubes so that Bex reports can be created for combined data from BPC cubes and BI cubes?
Also can we create Bex reports on BPC cubes just like we create for BI reporting cubes?
Let me also give an example of the scenario we face.
We have actuals data in a BI 7 basic cube(Actuals cube). Planning is done in BPC, so I understand that the planned data gets automatically stored in a BPC cube in BI7 system. I want to load the data from this BPC cube to BI Actuals cube and create a combined Bex report to show actuals and plan data.
Please let me know.
Thanks,
Archana

AS of now, if you report data in the BPC7NW cubes through BEx, you may not get the same result as you get from BPC reports. The reason being BEx won't do the same calculations (for example sign reversals) that BPC client would do. In addition, you won't be able to report the results of the dimension member formulas when you report through BEx. If you have to get data out from BPC cubes to other cubes, you can go through SQE (shared query engine) and that way, yyour results will match with what you get in BPC reports. Once you get data out through SQE into other cubes, you can use BEx to report if you wish.
More functionality will be available in near future to accomplish BEx reporting for BPC data.
Regards
Pravin

Data mismatch between Cube & Report

Gurus,
I am running a 'Sales -forecast & Commitment Analysis' report. For some reason, when I drill down to the Profit center, Major category & material level, my individual line items do not sum to the Result row i.e. there is a mismatch betwen the line iten numbers & the result.
However I checked with the listcube functionality of the cube. I see no fault with the data in the cube.
I also sat with the Basis/DBA guys, but i got to know there isn't any fault with the DB side or with indexing either. I have checked the report, the aggregates aswell. I am not able to make out anything.
Guru Plz suggest a solution.
Thanks & Regards,
Shree

Hi,
In your query click on the particular key figure and select calculations tab from the properties.
check what you have in calculate result as over there. make it total and see if it solves the problem.
Also check in the aggregation tab for any exception aggregation. in display tab see if any scaling factor is used. no scaling factor should be used genrally.
Regds,
Shashank

How to delete aggreagetd data in a cube without deleting the Aggregates?

Hi Experts,
How to delete aggreagetd data in a cube without deleting the Aggregates?
Regards
Alok Kashyap

Hi,
You can deactivate the aggregate. The data will be deleted but structure will remain.
If you switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. Switching off the aggreagte won't delete any data,but temporarly the aggregate will not be availbale as if it is not built on the info cube. No reporting is not possible on swtiched off aggregates. The definition of the aggregate is not deleted.
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.This aggregate will be having data from the previous load's. If the aggregate is switched off means it wont be available for reporting but data can be rolled up into it.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Later when you need those aggregate once again you have to create it from scratch.
Hope this helps.
Thanks,
JituK

Can I store only the aggregate data in OLAP cube

Hi All,
I know that the OLAP cubes store the leaf data and then builds the aggregate data on top of it and stores with in it. I have huge amounts of data ( like billions of data in my fact table and 6-8 dimension tables). If you keep the leaf data along with the agg data with in the cube would be too large to build.
So I am thinking to have to store only the agg data within the OLAP cube and for the leaf data it should still read from the Relational tables. Something like Hybrid OLAP.
(what I mean is
1. create the dimensions and cube in the AWM on 11g.
2. I will also specifiy the levels that I want the agg data to be calculated and stored in the OLAP cube.
(what I want is
1. I want to store only the agg data in the cube and leaf data still in the relatlional tables.
2. when I read the cube and drill down to the leaf level , it should fetch the leaf level data.
Is this possible in Oracle OLAP, if yes please provide some pointers
Thanks
S

First you should try out storing and aggregating data to atleast see if the cube-loading time, query-time and AW-size is within acceptable limit or not. 11gOLAP especially 11gR2 OLAP is very efficient on all three fronts.
Regarding specifying levels, you can either use Cost-based-aggregation and pick the %age that should be pre-aggregated OR you can use Level-based-aggregation and pick the levels from each dimension that should be pre-aggregated.
Try these out before venturing into anything else. You will be surprised by the results. There are other ways to store the data in smaller multiple-cubes and joining those cubes through formulas. Make sure you don't mistake an attribute for a dimension.
Not sure what you mean by just storing aggregated data in olap cubes. You can just do a SUM .. GROUP BY .. of relational data before loading it into olap cubes. For example, if you source data is at DAY level, you can SUM.. GROUP BY .. at MONTH-level and then load month-level data into olap cubes where leaf-level is month-level.
The sql view (used by reporting tools) could then be a join between month-level "olap" data and "day-level" relational data. When you are drilling-down on the data, the sql view will pick up data from appropriate place.
One more thing. Drill-Thru to detail data is a functionality of reporting tools also. If you are using OBIEE or Discoverer Plus OLAP, then you can design the reports in a way that after you reach the olap leaf-level, then it will take the user to a relational detail-report.
These are all just quick suggestions (on a Friday evening). If possible, you should get Oracle OLAP Consulting Group help, who can come up with good design for all your reporting needs.

How to make data loaded into cube NOT ready for reporting

Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
Please suggest. <removed>
Thanks

See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
Hope this helps...

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

How to create a report in bex based on last data loaded in cube?

I have to create a query with predefined filter based upon "Latest SAP date" i.e. user only want to see the very latest situation from the last load. The report should only show the latest inventory stock situation from the last load. As I'm new to Bex not able to find the way how to achieve this. Is there any time characteristic which hold the last update date of a cube? Please help and suggest how to achieve the same.
Thanks in advance.

Hi Rajesh.
Thnx fr ur suggestion.
My requirement is little different. I build the query based upon a multiprovider. And I want to see the latest record in the report based upon only the latest date(not sys date) when data load to the cube last. This date (when the cube last loaded with the data) is not populating from any data source. I guess I have to add "0TCT_VC11" cube to my multiprovider to fetch the date when my cube is last loaded with data. Please correct me if I'm wrong.
Thanx in advance.

How to get start date of the period for a given date from cube

I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
of the period. how can i write expression for that in my report?
ram

Hi ramprasad74,
According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
report will return the first day of FPeriod.
To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
On the toolbar, click Design to toggle to Query mode.
On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
In the Dimension column, choose a value from the drop-down list.
In the Hierarchy column, choose a value from the drop-down list.
In the Default column, from the drop-down list, select a single value.
Click OK.
In query designer dialog box, type the mdx query like below:
with member [Measures].[FirstChild]
as
[Date].[Fiscal].currentmember.parent.firstchild.name
select {[Measures].[FirstChild]} on 0,
[Date].[Fiscal].[Date].members on 1
from
( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
from
[Cube]
Here are relevant threads you can reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

While deleting the data from cube..getting the following erros...

while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System Administration

Hi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up?

Report data is from Cube or Aggregates ??

Similar Messages

Maybe you are looking for