Report for available space

Hello all:
any standard report that show capacity , used and available space?
THx in advance.
Edited by: Manthana99 on May 31, 2011 11:26 AM

Hi Manthan,
You can view REISROOC report for the same.
Regards
Rohit

Similar Messages

ITunes and my iPhone show two different amounts for available space

I have been unable to syncronize my iPhone 5 for a while now. I've tried unchecking the box to "Sync Music" which warned me it would remove music from my phone and then re-checking to re-add music back to my phone. This has worked in the past when my phone has had issues synchronizing. Now I appear to be totally stuck though.
The issue I've run in to is that iTunes says that I have 4177 songs (24.80 GB) on my iPhone (see below).
My iPhone under storage settings says I have 6.5GB (see below).
When I try to sync, I get the error message that says I don't have enough free space. I've tried clearing out apps, etc to give me more free space but what I'm finding again and again is that the issue is what iTunes thinks I have as free space is different than what my iPhone thinks.
For instance right now my iPhone shows 20.1 GB available but when I try to synchronize, iTunes says I need an additional 244.6 MB of free space. I clearly have way more than that according to my iPhone but can't seem to figure anything out.
If it's helpful, I'm in iOS version 8.2 and iTunes version 12.1.1.4 running on Windows 7 Professional SP1

You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs

I have just installed LR 4.4 on a Mac after using it on a PC. I am unable to backup to a catalog. The program tells me to check "folder permissions" and for available space (there's like 500 GB free)

How do I fix this so I can backup to the external drive I have been using with my PC?

Did you check the permissions to wherever you are making the backup? You need write permission to make a backup.

Available space incorrect

My 30gb iPod is reporting the capacity and available space at 27.8gb. I currently have 2172 songs on my iPod. iTunes reports the available space at approx 13.5gb. I recently applied the latest updater to my iPod with hopes that this would correct the problem. It did not. I have also restored my iPod back to factory defaults and resynched my library using iTunes.
How do I correct this? It sure would be nice to see how much capacity I have left without having to dock my iPod.
Thanks to anyone who can help.

No, the ipod will not display how much
remaining memory is on your ipod.
Yes, it does.
The available space number is not use for check
how much remaining space you have.
Yes, it is.
My numbers always stay the same:
Capacity 55.6 GB
Available 55.5 GB

Why does my Macintosh HD and Utility Disk give different available space values?

My MacBook Pro (about a year and a half old) has started running extremely slowly out of the blue, to the point it is barely functional. I've tried basically everything, restarting, cleaning up the desktop, clearing out my downloads file, starting in safe mode, resetting the PRAM, updating the operating system. Now my Mac HD says it has about 400GB free space out of 700GB, however today I was running utility disk to see if that would detect a problem and when selecting the first Macintosh HD option it says I only have around 18MB free, is this my problem? and if so how do I fix it? and why would I have two different values for available space? The second Macintosh HD entry does have the same available space in the get info page as is listed in the Disk Utility.

“Finder does not take into account the Backups/ local snapshots,
but disk utility includes them.”
http://pondini.org/TM/30.html
Disk space / Time Machine ?/ Local Snapshots
Local backups
http://support.apple.com/kb/PH18861?viewlocale=en_US&locale=en_US

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Crystal Reports for Eclipse 2.0 - Service Pack 1 - is Now Available!

Service Pack 1 for Crystal Reports for Eclipse 2.0 is now available!
Readme file listing the fixes is here:
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4ev2_readme.pdf]
Kirby Leong in another post listed the download URLs, which I'll copy here:
CR4E Runtime Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip]
CR4E Manual Install Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip]
CR4E All-In-One Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip]
CR4E Language Packs
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip]
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip]
If you wish to use the Eclipse IDE Software Updater:
1. Start Eclipse 3.4.1 (Gemini) IDE.
2. Select Help -> Software Updates...
3. Select the "Available Software" tab.
4. Click the "Manage Sites..." button.
5. If you do not see the following URL listed:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/
    then click "Add..." and add it.
6. Select the above URL in the "Available Software Sites", then click "OK".
7. The Available Software should now list the above URL. Open the node, and you should see "Crystal Reports for Eclipse".
8. Check all checkboxes for "Crystal Reports for Eclipse", and "Install..."
After successful update, you'll see version 2.0.1 listed in Help -> About Eclipse SDK and clicking on the "Crystal Reports for Eclipse" icon (blue swoosh with green diamond).
If you don't see that version listed, here's some troubleshooting tips:
Open a web browser, and Go to the following URL:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/site.xml
You should get back a XML file listed the current CR4E plugin and language packs versions. If you get an error instead, it may be because (1) you're in a locked down environment that won't let you access that site, or (2) the CR4E Update Site may be down for maintenance.   If the former, you'll have to download the updates by some other means and upgrade manually.

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
     String reportName = "report.rpt";
     ReportClientDocument clientDoc = new ReportClientDocument();
     clientDoc.open(reportName, 0);
     String tableAlias = "Command";
     clientDoc.getDatabaseController().setDataSource(
               myResult("SELECT * FROM table"),
               tableAlias,"resultsetTable");
     CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
     crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
     crystalReportPageViewer.processHttpRequest(
               request,
               response,
               application,
               null);
} catch (ReportSDKExceptionBase e) {
     e.printStackTrace();
    out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 無法預期的資料庫連線器錯誤---- Error code:-2147467259 Error code name:failed
Please help me and tell me why....

What are the reporting tools available for Java applications??

hi..
please tell me some reporting tools available for java applications.... if there are some, please mention how to find their documentation????

http://jasperreports.sourceforge.net is a nice one, there is also a link to a graphical design tool.

Verbatim disk drive historically used only for time machine backups. Recently i added some other media files to use some of available space without partitioning, the disc now refuses to mount in finder despite appearing in disk utility. Repair fails. HELP

Sorry to elaborate a bit more.
I have used time machine since owning my mac book pro with no issues. i keep the timemachine backups on an external hard drive made by Verbatim. This has not external power source.
Recently i decided to use up some of the available space on the external verbatim disk drive to store some movie files which were sitting on my macbook pro.
Therefore i created a new folder outside of the time machine backup folder and stored the movie files in there.
From then on Time machine failed... and a few days later i noticed it was not mounting in 'finder'
Therefore i used disk utility to see if it was recognising it. Which i was. However when i try to repair it the repair process fails.
In disk utility i am presented with 1 TB Samsung HN M10 which has a child called Verbatim HD.
The 1TB Samsung hardware appears fine, but the verbatim disk i am unable to fully verify and fix.
Does this mean i have lost all my back ups?
Have I lost all the media that i put on there?
Is there any way to fix this?
Any help would be appreciated.
didier07...

To summarize: You used an external Verbatim HD for your TM backups. Then, you stored some movie files on the "spare" space on the Verbatim drive. Now, Disk Utility isn't being recognized, and repair is disabled. Your home Samsung drive is working fine, but the Verbatim cannot be verified.
The problem, I believe, is that the external Verbatim drive wasn't partitioned. There should be two partitions: one for TM backups, the other for video. That way, you can perform backups, and still retain some space for video or somesuch.
Frankly, I don't know how to fix this except through the following. (1) Erase the Verbatim drive, (2) Create a new blank space and format it, (3) Make two partitions - one for backup, the other for video. (4) Run TM through one partition, but switch to the other for your videos. The better solution might be to have one dedicated drive (perhaps the Verbatim) for backups, and another dedicated drive for video backups; that way, you'll have plenty of space for expansion.
I hope someone will correct me if I'm incorrect, but I believe you've essentially lost your backups and media. I don't know how you can retrieve that clump of the now-undifferentiated data on the Verbatim drive. To retrieve any lost data, you're going to require another external drive that's larger in capacity, as well as data recovery software; don't expect encouraging results. If you're desperate, there are firms like Drive Savers that can offer a more comprehensive solution - at a cost.
Post if you have questions, or additional concerns!

Reports for Low disk space alerts in scom 2007

Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
Saravana

Hi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Data Collector Reports not available for SQL Reporting Services only SSMS

I never understood this one, why would you program Reporting Services (SSRS) reports inside SQL Server Management Studio (SSMS)?
The reports are available only through the SSMS interface, buried somewhere in the GUI, not easy to find.
Please make the MDW reports available on Reporting Services!

Hello,
These are not SSRS reports, these are RDLC reports for local rendering in a client application like SSMS; similar, but not the same. The reports are embedded as a resource in an assembly, that's
the reason why you can't find them.
You can have a SQL Server installation without Reporting Services; where should be the reports hosted then, if not in SSMS?
You can create your own SSRS based report; simply use SQL Profiler to capture the queries used by the origin reports.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Is there any table or report that available in SAP for any PR/STR

HI All,
Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
Please advice at the earliest.
Thanks
Chandru

Chandru,
Of course. The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
So, MD06>enter the plant. Optionally, enter the controller if you wish to limit the results by planner.
If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the "exceptions during Scheduling" or "exceptions during availability" groups. On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
You are now presented with a list of all materials that contain one or more of these exceptions. From the menu bar at the top, select Edit>Find. If you get a 'statistics' popup, click through. Select the 'Find Exceptions' tab.
Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order). Select this message.
Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order). Select this messaege.
Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
Clik the green check. You will now notice that certain rows on the listing are highlighted. These are the ones that contain your problem children. Hit the "glasses selected MRP list" button.
This takes you to the first MD05 of the highlighted items. Review the problem. Decide what to do: Cancel a supply element? Push out a supply element? Leave it alone? Call customer service to discuss which order was cancelled and why? etc etc etc...
Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2. Repeat. Continue till all materials have been evaluated and resolved.
This works for any other MRP message as well.
Regards,
DB49

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Encoding for blank spaces in url in a sql statement in report

1. What function or process do I use to encode for blank spaces in a url link in a report?
I need to link from a report to a 2nd report and pass 5 variables. I believe that I need to do that by embedding my own url in the sql for the report, since the standard report sets up for only 3 variables to be passed.
One of my variables PARTNER_FIRM has spaces in it, so how do I encode for that in the query. Currently, I have the following (... simplified).
select partner_firm,
count(distinct event) distinct_events,
'<a href="f?p=18509:4:&SESSION.::NO:4:P4_PARTNER_FIRM,P4_QUARTER,P4_CATEGORY,P4_PRODUCT_CATEGORY,P4_EVENT:' ||
partner_firm ||
'%2C&P3_QUARTER.%2C&P3_CATEGORY.%2C&P3_PRODUCT_CATEGORY.%2C&P3_EVENT.">' ||
count(distinct lower(attendee_email)) || '</a>' distinct_attendees
from all_events ...
but partner_firm has spaces which are returned. I think there is some way that I can encode for that?
Thanks,
Stephen

Sure there is:
select apex_util.url_encode('http://ww.oracle.com/') from dual
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Report for available space

Similar Messages

Maybe you are looking for