Report for Material - Storage Location - Storage Bin

All SAP Gurus,
Is there any standard report available in which we can find out the storage bins for list of materials?
(We have not implimented Warehouse MAnagement)
Regards,

HI,
You need to have Warehouse management in place in order to view the storage bins for materials,
MMBE of MM cannot give you the idea of storage bins.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Similar Messages

Report for material documents with storage location

Hi gurus,
I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
Thanks for your help.
Regards.

Hi,
You can use MB51 or MB59 with customised layout selection for your requirement.
With regards,
Ajay.

Transfer stock from Storage Location to Bin

Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
Suman

Dear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman

Split storage locations into bin locations

Hi,
Is it possible to split storage locations into bin locations without using warehouse management?
Regards,
Shiyam

Hi,
You can set up as many storage locations as you need and so COULD have one storage location for each BIN (there is only a one-to-one relationship and so you can't use multiple bins in the same location without WM).
But if you have lots of BINS then you should really be using WM.
Steve B

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Report for material which not consumed during C015

HI ALL,
"I required a report for material which material are not
consumed at C015 production confirmation time against actual consumation (order wise , part no wise & date wise )"
its v urgent
good suggesstion reward with valuable points.

Amit,
I think your problem is that you want to monitor when users are deleting the goods issue while confirmation. So you would have to know if for a confirmation qty of 100, the planned consumption should have been 100 but the actual consuption is 50.
So you would want to relate the confirmation qty with the planned and actual consumption.
In COOIS Remt, qty and Withdrawal qty will show the total reqmt and actual withdrwal. Hope this will not be helpful if I understand correctly.
You have to create a simple query joining tables AFVV with RESB. Calculate the planned consuption for the confirmation qty. This along with the actual consuption will help to give what you are looking for.
I am right ?
Ram

Report for material gr/ir clearing account display differences

report for material gr/ir clearing account display differences

hi salsa,
There is no such report for the datails of material gr/ir ......
but T code J1ILN and select
Indirect taxes -
> Register -
> Excise tax -
> In J1IN Update Excise register RG23a -
> then Extract rg23a----- > PRint utility program Rg23a
here u can extract all the invoices gr/ir
Through
T code J1I5
J2I5
J2I6
if useful assign points...
regards,
santoshkumar

Report for material consumption

Can any one guide me in developing a report to find the material consumed during a certain period ,
selectio screen should me consiting of matrial and date

Hi
See the sample report and do accordingly
report ystk message-id yz2 line-size 231 line-count 45
no standard page heading.
Type Declaration *
type-pools slis.
Tables *
tables: mkpf, " Material Document: Header Data
mseg, " Material Document: Item Data
mara,
mard,
s031,
ekko,
ekpo,
likp,
makt,
j_1iwrkcus,
t001w,
wb2_v_mkpf_mseg2,
mmim_rep_print,
yw2_stkmovements,
yplnt,
mardh.
Internal Tables *
data: i_werks like j_1iwrkcus occurs 0 with header line.
data: begin of i_yplnt occurs 0,
pplnt like yplnt-pplnt,
wplnt like yplnt-wplnt,
end of i_yplnt.
data: begin of i_mkpf occurs 0,
mblnr like mkpf-mblnr,
mjahr like mkpf-mjahr,
budat like mkpf-budat,
vgart like mkpf-vgart,
bwart like mseg-bwart,
matnr like mseg-matnr,
werks like mseg-werks,
lgort like mseg-lgort,
menge like mseg-menge,
meins like mseg-meins,
kunnr like mseg-kunnr,
zeile like mseg-zeile,
xauto like mseg-xauto,
shkzg like mseg-shkzg,
matnr1 like mseg-matnr,
end of i_mkpf.
data: begin of i_mardh occurs 0,
werks like mardh-werks,
meins like mara-meins,
matnr like mardh-matnr,
lgort like mardh-lgort,
labst like mardh-labst,
lfgja like mardh-lfgja, "Added -MB
lfmon like mardh-lfmon, "Added -MB
perio(6),
insme like mardh-labst,
einme like mardh-labst,
speme like mardh-labst,
retme like mardh-labst,
o_stk like mardh-labst, " Opening Stock
c_stk like mardh-labst, " Closing Stock
end of i_mardh.
data: begin of i_mard occurs 0,
werks like mard-werks,
matnr like mard-matnr,
lgort like mard-lgort,
labst like mard-labst,
insme like mard-labst,
meins like mara-meins,
einme like mard-labst,
speme like mard-labst,
retme like mard-labst,
end of i_mard.
data: i_mard1 like i_mard occurs 0 with header line.
data: i_mardh1 like i_mardh occurs 0 with header line.
data: begin of i_mkpf1 occurs 0,
mblnr like mkpf-mblnr,
werks like mseg-werks,
matnr like mseg-matnr,
budat like mkpf-budat,
bwart like mseg-bwart,
mjahr like mkpf-mjahr,
vgart like mkpf-vgart,
lgort like mseg-lgort,
menge like mseg-menge,
meins like mseg-meins,
xauto like mseg-xauto,
shkzg like mseg-shkzg,
end of i_mkpf1.
data: begin of i_mkpf2 occurs 0,
werks like mseg-werks,
matnr like mseg-matnr,
budat like mkpf-budat,
bwart like mseg-bwart,
mjahr like mkpf-mjahr,
vgart like mkpf-vgart,
lgort like mseg-lgort,
menge like mseg-menge,
meins like mseg-meins,
xauto like mseg-xauto,
end of i_mkpf2.
data: begin of i_final5 occurs 0,
werks like mseg-werks, " Plant
matnr like mseg-matnr, " Material
lgort like mseg-lgort, " Storage Location
budat like mkpf-budat, " Posting Date
mtart like mara-mtart, " Material Type
spmon like s031-spmon, " Month
maktx like makt-maktx, " Description
meins(3), " UOM
meins like mseg-meins,
o_stk like mardh-labst, " opening stock
trecep like mardh-labst, " total receipts
produ like mardh-labst, " Net Receipts - Production
recep like mardh-labst, " Net Receipts - Receipts
sal_ret like mardh-labst, " Net Receipts - Sales Return
tdisp like mardh-labst, " total dispatches
custmr like mardh-labst, " Net Dispatches - Customers
oplant like mardh-labst, " Net Dispatches - To Other Plant
tloss like mardh-labst, " Total Loss
trloss like mardh-labst, " Transit Loss
whloss like mardh-labst, " Warehouse Loss
c_stk like mardh-labst, " Closing Stock
trfstk like mardh-labst, "Transfer stock
menge like mseg-menge,
othadj like mardh-labst,
end of i_final5.
data: begin of i_final occurs 0,
werks like mseg-werks, " Plant
matnr like mseg-matnr, " Material
budat like mkpf-budat, " Posting Date
mtart like mara-mtart, " Material Type
spmon like s031-spmon, " Month
maktx like makt-maktx, " Description
meins(3), " UOM
meins like mseg-meins,
o_stk like mardh-labst, " opening stock
trecep like mardh-labst, " total receipts
produ like mardh-labst, " Net Receipts - Production
recep like mardh-labst, " Net Receipts - Receipts
sal_ret like mardh-labst, " Net Receipts - Sales Return
tdisp like mardh-labst, " total dispatches
custmr like mardh-labst, " Net Dispatches - Customers
oplant like mardh-labst, " Net Dispatches - To Other Plant
trfstk like mardh-labst, "Material Transfer stock
trloss like mardh-labst, " Transit Loss
whloss like mardh-labst, " Warehouse Loss
tloss like mardh-labst, " Total Loss
c_stk like mardh-labst, " Closing Stock
othadj like mardh-labst,
end of i_final.
data: i_final1 like i_final occurs 0 with header line.
data: begin of i_final_temp occurs 0,
werks like mseg-werks, " Plant
matnr like mseg-matnr, " Material
mtart like mara-mtart, " Material Type
maktx like makt-maktx, " Description
meins like mseg-meins,
o_stk like mardh-labst, " opening stock
trecep like mardh-labst, " total receipts
produ like mardh-labst, " Net Receipts - Production
recep like mardh-labst, " Net Receipts - Receipts
sal_ret like mardh-labst, " Net Receipts - Sales Return
tdisp like mardh-labst, " total dispatches
custmr like mardh-labst, " Net Dispatches - Customers
oplant like mardh-labst, " Net Dispatches - To Other Plant
trfstk like mardh-labst, "Material Transfer stock
trloss like mardh-labst, " Transit Loss
whloss like mardh-labst, " Warehouse Loss
tloss like mardh-labst, " Total Loss
c_stk like mardh-labst, " Closing Stock
othadj like mardh-labst,
end of i_final_temp.
For Materials
data: begin of i_mara occurs 0,
matnr type mara-matnr,
mtart type mara-mtart,
meins like mara-meins,
labst type mard-labst,
maktx like makt-maktx,
end of i_mara.
data: begin of i_stkmvmnts occurs 0,
bwart like mseg-bwart,
shkzg like mseg-shkzg,
vzbew like yw2_stkmovements-vzbew,
end of i_stkmvmnts.
data: begin of i_finalt occurs 0,
werks like mseg-werks, " Plant
matnr like mseg-matnr, " Material
budat like mkpf-budat, " Posting Date
mtart like mara-mtart, " Material Type
spmon like s031-spmon, " Month
maktx like makt-maktx, " Description
meins(3), " UOM
meins like mseg-meins,
o_stk like mardh-labst, " opening stock
trecep like mardh-labst, " total receipts
produ like mardh-labst, " Net Receipts - Production
recep like mardh-labst, " Net Receipts - Receipts
sal_ret like mardh-labst, " Net Receipts - Sales Return
tdisp like mardh-labst, " total dispatches
custmr like mardh-labst, " Net Dispatches - Customers
oplant like mardh-labst, " Net Dispatches - To Other Plant
trfstk like mardh-labst, "Material Transfer stock
trloss like mardh-labst, " Transit Loss
whloss like mardh-labst, " Warehouse Loss
tloss like mardh-labst, " Total Loss
c_stk like mardh-labst, " Closing Stock
othadj like mardh-labst,
month(8) ,
end of i_finalt.
data: imkpft like i_mkpf occurs 0 with header line.
data: imkpft1 like i_mkpf1 occurs 0 with header line.
data: imardt like i_mard occurs 0 with header line.
data: imardht like i_mardh occurs 0 with header line.
data: t_final like i_mkpf occurs 0 with header line.
data: imkpft2 like i_mkpf occurs 0 with header line.
FCAT is used for the field catalog
data: fcat type table of slis_fieldcat_alv with non-unique default key
with header line initial size 0,
for excluding the ICONs from the application toolbar
fexc type table of slis_extab with non-unique default key
with header line initial size 0,
FS_LAYO is used for Grid Layout
fs_layo type slis_layout_alv,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
fevents type table of slis_alv_event with non-unique default key
with header line initial size 0,
FHEADER is used for List header
fheader type table of slis_listheader with non-unique default key
with header line initial size 0,
sort is used for sorting
fsort type table of slis_sortinfo_alv with non-unique default key
with header line initial size 0,
fcat1 type table of slis_fieldcat_alv with non-unique default key
with header line initial size 0,
fs_layo1 type slis_layout_alv,
gt_list_top_of_page1 type slis_t_listheader,
fevents1 type table of slis_alv_event with non-unique default key
with header line initial size 0,
fheader1 type table of slis_listheader with non-unique default key
with header line initial size 0,
g_statu_071 type slis_formname value 'Z_PFSTATUS',
alv_variant1 like disvariant.
Variable Declaration *
types: trff_type_dec_6_5(6) type p decimals 5.
data: fyear(4),
mon(2),
fyear1(4),
mon1(2),
obal like mard-labst,
cbal like mard-labst,
index type i,
count,
count1 type i,
o_stk type p decimals 3,
c_stk type p decimals 3,
v_mjahr like mkpf-mjahr,
months type trff_type_dec_6_5,
month type i.
Global variables for handling ALV functionality
data: alv_keyinfo type slis_keyinfo_alv,
alv_variant like disvariant,
alv_layout type slis_layout_alv,
alv_repid like sy-repid,
alv_print type slis_print_alv,
alv_detail_func(30),
alv_default_variant like disvariant-variant,
alv_colourize_fields like mmim_rep_print-color.
ranges: r_budat for mkpf-budat.
*Added by Prabhu for year on 26.4.05.
data: idate like r_budat occurs 0 with header line.
Selection Screen Elements *
selection-screen begin of block blk with frame title text-001.
select-options: s_werks for mard-werks obligatory
no intervals.
parameter: p_spmon like s031-spmon no-display .
select-options: s_matnr for mara-matnr obligatory,
s_lgort for mseg-lgort no-extension no intervals,
s_mblnr for mkpf-mblnr,
s_budat for mkpf-budat obligatory .
selection-screen end of block blk.
selection-screen begin of block blk3 with frame title text-004.
parameter : mtart like mara-mtart
default 'FERT' no-display.
selection-screen end of block blk3.
selection-screen begin of block blk2 with frame title text-003.
selection-screen end of block blk2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
selection-screen begin of block b3 with frame title text-007.
parameters: d1 radiobutton group p1 default 'X',
m1 radiobutton group p1,
y1 radiobutton group p1.
selection-screen end of block b3.
selection-screen begin of block b2 with frame title text-006.
parameters: alv_def like disvariant-variant.
selection-screen end of block b2.
data: s_budat1 like s_budat occurs 0 with header line."prabhu
Initialization *
initialization.
perform alv_init.
at selection-screen on value-request for alv_def.
perform alv_f4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
at selection-screen.
checking for the layout
perform alv_check.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
perform validity_check.
if mtart ne 'FERT'.
message e041 with 'Material Type must be FERT Only...'.
endif.
if d1 = 'X'." On 26.4.05.
p_spmon0(4) = s_budat-low0(4).
p_spmon4(2) = s_budat-low4(2).
else.
p_spmon0(4) = s_budat-low0(4).
p_spmon4(2) = s_budat-low4(2).
endif.
loop at s_budat.
if s_budat-high is initial.
s_budat-high = s_budat-low.
modify s_budat.
endif.
endloop.
idate-low = s_budat-low.
idate-high = s_budat-high.
call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
exporting
i_date_from = idate-low
i_date_to = idate-high
importing
E_DAYS =
e_months = month
E_YEARS =
data: i(3) type c.
i = s_budat-low+4(2).
clear: r_budat.
refresh: r_budat.
*added by Prabhu for Only for Oneday.on 18.5.5
if month eq '0'.
month = month + 1.
endif.
*added by Prabhu for Only for Oneday.on 18.5.5
do month times.
r_budat-low = s_budat-low.
append r_budat.
enddo.
i = 0.
loop at r_budat.
r_budat-low4(2) = s_budat-low4(2) + i.
i = i + 1.
r_budat-low+6(2) = '01'.
modify r_budat.
endloop.
loop at r_budat.
call function 'RP_LAST_DAY_OF_MONTHS'
exporting
day_in = r_budat-low
importing
last_day_of_month = r_budat-high
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
modify r_budat.
endloop.
loop at r_budat.
if r_budat-low4(2) = s_budat-low4(2).
r_budat-low = s_budat-low.
modify r_budat.
endif.
if r_budat-high4(2) = s_budat-high4(2).
r_budat-high = s_budat-high.
modify r_budat.
endif.
For Summary on 26.4.05.
if y1 = 'X'.
clear r_budat.
refresh r_budat.
r_budat-low = s_budat-low.
r_budat-high = s_budat-high.
append r_budat.
clear r_budat.
endif.
endloop.
At Selection Screen *
at selection-screen output.
Start of Selection *
start-of-selection.
v_mjahr = p_spmon+0(4).
Get plant distinction warehouse/production
perform get_plant_distinction.
Collect the data from various tables
perform getdata_fg_stock.
here the number of rows in the output table is found
perform output_table_check.
here the top of the page code is written, that is to be displayed
in the output
perform z_top_of_page.
here ALV layout properties are set
perform z_layout_settings.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
perform z_alv_events.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
perform z_create_field_catalog.
This is for displaying the output
perform z_reuse_alv_grid_display.
*& Form getdata_fg_stock
Getting data from standard tables
form getdata_fg_stock.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
if mon eq '01'.
mon1 = mon.
fyear1 = fyear.
mon = '12'.
fyear = fyear - 1.
else.
mon1 = mon.
fyear1 = fyear.
mon = mon - 1.
fyear = fyear.
endif.
perform get_records_from_db.
*added for Month Summary on 26.4.05.
loop at r_budat.
s_budat-low = r_budat-low.
s_budat-high = r_budat-high.
*for Month
p_spmon0(4) = s_budat-low0(4).
p_spmon4(2) = s_budat-low4(2).
*for summary.
if y1 = 'X'.
loop at s_budat.
s_budat1-sign = 'I'.
s_budat1-option = 'NB'.
s_budat1-low = s_budat-low.
s_budat1-high = s_budat-high.
append s_budat1.
clear s_budat1.
endloop.
endif.
imkpft[] = i_mkpf[].
imkpft2[] = i_mkpf[].
imardt[] = i_mard[].
imardht[] = i_mardh[].
perform month_wise.
perform process_movements.
perform calculate_opening_stock.
perform update_non_transaction_itms.
perform delete_empty_records.
clear: imardht,imardt,imkpft1,imkpft,i_final,i_final5.
refresh: imardht,imardt,imkpft1,i_final,i_final5,imkpft.
endloop.
clear: r_budat.
refresh: r_budat.
*end of changes for month.
endform. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
form monat_f4.
data: begin of mf_dynpfields occurs 1.
include structure dynpread.
data: end of mf_dynpfields.
data: mf_returncode like sy-subrc,
mf_monat like isellist-month,
mf_hlp_repid like sy-repid.
field-symbols: .
Wert von Dynpro lesen
get cursor field mf_dynpfields-fieldname.
append mf_dynpfields.
mf_hlp_repid = sy-repid.
do 2 times.
call function 'DYNP_VALUES_READ'
exporting
dyname = mf_hlp_repid
dynumb = sy-dynnr
tables
dynpfields = mf_dynpfields
exceptions
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07.
if sy-subrc = 3.
Aktuelles Dynpro ist Wertemengenbild
mf_hlp_repid = 'SAPLALDB'.
else.
read table mf_dynpfields index 1.
Unterstriche durch Blanks ersetzen
translate mf_dynpfields-fieldvalue using '_ '.
exit.
endif.
enddo.
if sy-subrc = 0.
Konvertierung ins interne Format
call function 'CONVERSION_EXIT_PERI_INPUT'
exporting
input = mf_dynpfields-fieldvalue
importing
output = mf_monat
exceptions
error_message = 1.
if mf_monat is initial.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
mf_monat = sy-datlo(6).
endif.
call function 'POPUP_TO_SELECT_MONTH'
exporting
actual_month = mf_monat
importing
selected_month = mf_monat
return_code = mf_returncode
exceptions
factory_calendar_not_found = 01
holiday_calendar_not_found = 02
month_not_found = 03.
if sy-subrc = 0 and mf_returncode = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
call function 'CONVERSION_EXIT_PERI_OUTPUT'
exporting
input = mf_monat
importing
output = mf_dynpfields-fieldvalue.
collect mf_dynpfields.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = mf_hlp_repid
dynumb = sy-dynnr
tables
dynpfields = mf_dynpfields
exceptions
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07. "<<== note 148804
endif.
endif.
endform. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
form get_month_dates.
if m1 = 'X'.
fyear = p_spmon+0(4).
mon = p_spmon+4(2).
concatenate fyear mon '01' into r_budat-low.
r_budat-sign = 'I'.
r_budat-option = 'BT'.
call function 'BKK_GET_MONTH_LASTDAY'
exporting
i_date = r_budat-low
importing
e_date = r_budat-high.
append r_budat.
clear s_budat.
refresh s_budat.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
s_budat-low = r_budat-low.
s_budat-high = r_budat-high.
append s_budat.
else.
fyear = p_spmon+0(4).
mon = p_spmon+4(2).
concatenate fyear mon '01' into r_budat-low.
r_budat-sign = 'I'.
r_budat-option = 'BT'.
call function 'BKK_GET_MONTH_LASTDAY'
exporting
i_date = r_budat-low
importing
e_date = r_budat-high.
append r_budat.
endif.
endform. " get_month_dates
*& Form output_table_Check
checking for records for output
form output_table_check .
describe table i_finalt lines index.
if index eq 0.
message i041 with text-005.
leave list-processing.
endif.
endform. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *

Creating Z report for material stock (plant maintenance module)

hello,
we are implemented Plant maintenance module (SAP PM) in our organization.
our requirement is to create a stock report which will incldue
followings:-
1)material number
2)plant number
3) storage location
4) material type
5)valuation type
6)Opening Stock
7) OpValue
8)Received Stock
9)   ReceiptValue
10)   Issue Stock
11) IssueValue
12) Closing Stock
13) Closing Value
we want above details in ALV grid format.
to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
opening stock + received stock - issue stock = closing stock
opening value + recipt value - issue value = closing value
we are unable to find table name for accessing opening stock, received stock , issue stock & opening value ,recipt value , issue value from system. please suggest table name information for getting above details for creating Z report

Dear friend,
Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
MB5T Stock in Transit
MMBE Stock Overview
MD04 Stock/Reqs list
MB53 Plant Stock Availability
MB52 Warehouse Stock
MB5M Expiration Date list
MB5B Stock for Posting Date
MB5T Stock in Transit
MBBS Valuated Special Stock
MBLB Stock with Subcontractor
The possible tables are:
MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
Good luck!

Regarding report for material status

HI All,
Can u guys pls help me thre is an error in the report
which iam presenting now. The error is that iam getting
the output for units in simple report is 'PC' and iam getting the out put for units in ALV as 'ST'.
why, i need an immediate reply.
*& Report ZSTOCKDETAILS4 *
REPORT zstockdetails4 NO STANDARD PAGE HEADING
 LINE-SIZE 160
 LINE-COUNT 60(3).
 tables declaration *
TABLES : mara, "general material data
 marc, "plant data for material
 mard, "storage location data for material
 makt. "material description
TYPE-POOLS : slis.
 internal table declaration *
TYPES : BEGIN OF ty_mara,
 matnr TYPE matnr,
 mtart TYPE mtart,
 meins TYPE meins,
 END OF ty_mara.
TYPES : BEGIN OF ty_marc,
 matnr TYPE matnr,
 werks TYPE werks,
 END OF ty_marc.
TYPES : BEGIN OF ty_mard,
 matnr TYPE matnr,
 werks TYPE werks,
 lgort TYPE lgort_d,
 labst TYPE labst,
 END OF ty_mard.
TYPES : BEGIN OF ty_makt,
 matnr TYPE matnr,
 maktx TYPE maktx,
 END OF ty_makt.
DATA:t_mara TYPE TABLE OF ty_mara WITH HEADER LINE,
 t_marc TYPE TABLE OF ty_marc WITH HEADER LINE,
 t_mard TYPE TABLE OF ty_mard WITH HEADER LINE,
 t_makt TYPE TABLE OF ty_makt WITH HEADER LINE.
PARAMETER : p_alv AS CHECKBOX DEFAULT 'X'.
 final internal table *
TYPES : BEGIN OF ty_out,
 matnr TYPE matnr,
 werks TYPE werks,
 lgort TYPE lgort_d,
 labst TYPE labst,
 meins TYPE meins,
 mtart TYPE mtart,
 maktx TYPE maktx,
 END OF ty_out.
DATA:t_out TYPE TABLE OF ty_out WITH HEADER LINE.
 DATA DECLARATION FOR ALV *
DATA : fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 gd_repid LIKE sy-repid,
 gd_layout TYPE slis_layout_alv,
 gd_tab_group TYPE slis_t_sp_group_alv,
 gt_list_top_of_page TYPE slis_t_listheader,
 it_sortcat TYPE slis_sortinfo_alv OCCURS 1,
 wa_sort LIKE LINE OF it_sortcat.
 selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_werks FOR marc-werks OBLIGATORY,
 s_matnr FOR mara-matnr,
 s_mtart FOR mara-mtart,
 s_lgort FOR mard-lgort.
SELECTION-SCREEN END OF BLOCK b1.
 start-of-selection *
START-OF-SELECTION.
SELECT matnr mtart meins
 FROM mara
 INTO TABLE t_mara
 WHERE matnr IN s_matnr
 AND mtart IN s_mtart.
SORT t_mara BY matnr.
SELECT matnr werks
 FROM marc
 INTO TABLE t_marc
 FOR ALL ENTRIES IN t_mara
 WHERE matnr = t_mara-matnr
 AND werks IN s_werks.
SORT t_marc BY matnr.
SELECT matnr lgort labst
 FROM mard
 INTO CORRESPONDING FIELDS OF TABLE t_mard
 FOR ALL ENTRIES IN t_mara
 WHERE matnr = t_mara-matnr
 AND lgort IN s_lgort.
SORT t_mard BY matnr.
LOOP AT t_mara.
 READ TABLE t_marc WITH KEY matnr = t_mara-matnr BINARY SEARCH.
 READ TABLE t_mard WITH KEY matnr = t_mara-matnr BINARY SEARCH.
 MOVE : t_mara-matnr TO t_out-matnr.
 MOVE : t_mara-mtart TO t_out-mtart.
 MOVE : t_mara-meins TO t_out-meins.
 MOVE : t_marc-werks TO t_out-werks.
 MOVE : t_mard-lgort TO t_out-lgort.
 MOVE : t_mard-labst TO t_out-labst.
 SELECT SINGLE matnr maktx
 FROM makt
 INTO CORRESPONDING FIELDS OF makt
 WHERE matnr = t_mara-matnr.
 MOVE-CORRESPONDING makt TO t_out.
 LOOP AT t_mard WHERE matnr = t_mara-matnr.
 MOVE : t_mard-lgort TO t_out-lgort.
 MOVE : t_mard-labst TO t_out-labst.
 APPEND t_out.
 CLEAR : t_out-lgort, t_out-labst.
 ENDLOOP.
 CLEAR t_out.
ENDLOOP.
SORT t_out BY werks lgort matnr.
IF
p_alv = 'X'.
 PERFORM build_fieldcatalog.
 PERFORM display_alv_report.
ELSE.
 DATA: tot_lgort TYPE labst,
 tot_werks TYPE labst,
 tot TYPE labst.
 LOOP AT t_out.
 NEW-LINE.
 WRITE :/ sy-vline, t_out-matnr,
 15 t_out-werks,
 35 t_out-lgort,
 45 t_out-labst,
 85 t_out-meins,
 100 t_out-mtart,
 120 t_out-maktx,160 sy-vline.
 tot_lgort = tot_lgort + t_out-labst.
 tot_werks = tot_werks + t_out-labst.
 tot = tot + t_out-labst.
 AT LAST.
 ULINE.
 WRITE : / 'THE GRAND TAOTAL IS', 52 tot.
 ENDAT.
 ENDLOOP.
ENDIF.
 TOP-OF-PAGE *
TOP-OF-PAGE.
ULINE.
WRITE : sy-vline, 'MATERIAL',
 15 'PLANT',
 32 'STOR LOC',
 56 'STOCK',
 80 'UNITS',
 95 'MAT TYPE',
 115 'MAT DESCR',160 sy-vline.
ULINE.
*& Form build_fieldcatalog
 text
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'WERKS'.
fieldcatalog-seltext_m = 'Plant'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'LGORT'.
fieldcatalog-seltext_m = 'Storage Location'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'LABST'.
fieldcatalog-seltext_m = 'Stock'.
fieldcatalog-col_pos = 3.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Unit of Measure'.
fieldcatalog-col_pos = 4.
fieldcatalog-datatype = 'PC'.
fieldcatalog-reptext_ddic = 'Unit of Measure'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MTART'.
fieldcatalog-seltext_m = 'Material Type'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MAKTX'.
fieldcatalog-seltext_m = 'Material Description'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. "build_fieldcatalog
*& Form display_alv_report
 text
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 i_callback_program = gd_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = ' '
 i_callback_top_of_page = 'TOP-OF-PAGE'
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 it_sort = it_sortcat
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = t_out
 EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report

Hi Sai,
Please do the following:
While populating the fileld catalog for "MEINS".

add the shown code in bold:
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Unit of Measure'.
fieldcatalog-CFIELDNAME = 'MEINS'.
fieldcatalog-CTABNAME = 'MARA'.
fieldcatalog-col_pos = 4.
fieldcatalog-datatype = 'PC'.
fieldcatalog-reptext_ddic = 'Unit of Measure'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
This will bring you "EA" in place of ST.
Hope this will work for you.
Lanka

Problem while creating a ABAP Quarry report for material master

Hi Friend,
While I am trying to create a Quarry, certain warning message is coming and while I am executing single material is coming too many times in report with all currencies.
Picking the data from Table: MARA, MARC, MARD, MAKT, MBEW, QMAT, AND T001 (FOR Currencies only).
I need your help to clarify 2 point:
Where I should assign the table with whom as I have simply selected the table one by one assigned button clicked.
2nd How and from which Table currencies could picked as here said warning is coming and a single material is coming multiple times with all currencies in report.
I have used as SQ03 then SQ02 and finally SQ01u2026..else I have checked the same in SQVI, but still I didnu2019t get any such fruitful.
Filed Description          List Display            Screen Display                  Table u2013 Field
Plant               X          X          MARC                        Material Code          X          X          MARA
Storage Location          X          X          MARD                       Storage Condition          X          X          MARA     - RAUBE
Material Type                    X          MARA
Old Material No          X                    MARA     - BISMT               Material Description          X                                    MAKT                                       Base Unit of Measurement          X                    MARA     - MEINS
Material Price (Moving)          X                    MBEW                                   Material Price (Standard)          X                    MBEW
Valuation Class          X                    MBEW     -BKLAS
Inspection Type          X                    QMAT     - ART                  Currency Key          X                    T001              -WARES
Rest of the field I have not written as you are aware about that .
Pl suggest or help me to prepare the doc in screen shot, will have a great help from you end.
Regards,
Pinku

Dear Vijay,
I have done the same as per your earlier, but for picking th ecurrency in display, I have given Table T001, whether it is o.k. or else what? Wheneven I am trying by th esam eway, system is poping a warning message and then it's executing , but displaying all the materials with all currecies means a single material is coming too amny times with all currecy, so I need to pick extact one and for that if you could do andcan send me a screen shot more helpful to me.
Thanks.
jbs.sap.mm                at the rate of hotmail.com
Pinku

Report for material consumption based on movement type

Can any one guide me in developing a report to find the material consumed during a certain period ,
selectio screen should be based on material no , plant , location , month

You would need to fetch the accounting number (BELNR) from BKPF based on the purchase order number (XBLNR) and then proceed accordingly with BSIK and BSAK.
Select .......
 from bkpf
 into table <it>
 where xblnr in so_xblnr
Something like above.
Few other important tables in MM and FI:
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
AGKO Cleared Accounts
ANAR Asset Types
ANAT Asset type text
ANEK Document Header Asset Posting
ANEP Asset Line Items
ANEV Asset downpymt settlement
ANKT Asset classes- Description
ANLA Asset Master Record Segment
ANLB Depreciation terms
ANLC Asset Value Fields
ANLH Main asset number
AT02T Transaction Activity Category- Description
AT02A Transaction Code for Menu TIMN
AT10 Transaction type
AT10T Name of Transaction Type
BKDF Document Header Supplement for Recurring Entry
BKORM Accounting Correspondence Requests
BKPF Accounting Document Header
BLPK Document log header
BLPP Document log item
BLPR Document Log Index and Planned Order (Backflush)
BNKA Bank master record
BP000 Business Partner Master (General Data)
BPBK Doc.Header Controlling Obj.
BPEG Line Item Total Values Controlling Obj.
BPEJ Line Item Annual Values Controlling Obj.
BPEP Line Item Period Values Controlling Obj.
BPGE Totals Record for Total Value Controlling obj.
BPJA Totals Record for Annual Total Controlling Obj.
BSAD Accounting- Secondary Index for Customers (Cleared Items)
BSAK Accounting- Secondary Index for Vendors (Cleared Items)
BSAS Accounting- Secondary Index for G/L Accounts (Cleared Items)
BSEC One-Time Account Data Document Segment
BSEG Accounting Document Segment
BSID Accounting- Secondary Index for Customers
BSIK Accounting- Secondary Index for Vendors
BSIM Secondary Index, Documents for Material
BSIS Accounting- Secondary Index for G/L Accounts
CEPC Profit Center Master Data Table
CEPCT Texts for Profit Center Master Data
COBRA Settlement Rule for Order Settlement
COBRB Distribution Rules Settlement Rule Order Settlement
COKA CO Object- Control Data for Cost Elements
COSP CO Object- Cost Totals for External Postings
COSS CO Object- Cost Totals for Internal Postings
CRCO Assignment of Work Center to Cost Center
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
CSLA Activity master
FEBEP Electronic Bank Statement Line Items
FPLA Billing Plan
FPLT Billing Plan- Dates
GLPCT EC-PCA- Totals Table
KNA1 General Data in Customer Master
KOMK Pricing Communication Header
MAHNV Management Records for the Dunning Program
REGUT TemSe - Administration Data
SKA1 G/L Account Master (Chart of Accounts)
SKAT G/L Account Master Record (Chart of Accounts- Description)
SKB1 G/L account master (company code)
T003T Document Type Texts
T007S Tax Code Names
T087J Text
TAPRFT Text tab. for investment profile
TKA01 Controlling Areas
TKA09 Basic Settings for Versions
TKVS CO Versions
TZB0T Flow types text table
TZPAT Financial Assets Management product type texts
VBSEGS Document Segment for G/L Accounts Document Parking
VTBFHA Transaction
VTBFHAPO Transaction Flow
VTBFHAZU Transaction Activity
VTBFINKO Transaction Condition
VTIDERI Master Data Listed Options and Futures
VTIFHA Underlying transaction
VTIFHAPO Underlying transaction flows
VTIFHAZU Underlying transaction status table
VTIOF Options Additional Data
VWPANLA Asset master for securities
Also, visit the following links:
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.erpgenie.com/abap/tables.htm
http://goldenink.com/abap/files_in_sap.html

Report for material moved from blocked stock to unrestricted stock

Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
Pratap

It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

REPORT FOR MATERIAL MASTER

HOW TO write a report in Material Master that outputs Material valuated stock grouped by Material type and Plant. The output shows Material Number, Storage Location and Unit of Measure and description in addition to group totals.

Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.

Report for material prices

Hi,
Please help me out in generation of below report, if it not possible give the table names and field names.
Report to display all material rates by using material number, sales organization and distribution channel and condition type.
Please send your views to '[email protected]'
Thanks & Regards,
Muraly G

Hi
use the following tables to prepare the report
MARA--Material Master-General (MATNR,MTART,MATKL)
MARC--Material Master-Plant data(MATNR,WERKS,EKGRP)
MARD--Material Master- St.Location Data(MATNR,WERKS,LGORT,LABST)
MAKT--Material Descriptions(MATNR,MATKL,MAKTX)
MBEW--Material Valuation Data(MATNR,BWTAR)
MVKE-Material Master: Sales related Data(MATNR,VKORG,VTWEG)
Reward points for useful Answers
Regards
Anji

Report for Material - Storage Location - Storage Bin

Similar Messages

Maybe you are looking for