Report Group in  Report Painter

In my <b>report group</b> there are many reports .
Now i need to give a transaction code to my <b>report group</b>.
Then which report will execute by the transaction code

Hi
To create a Transaction Code for a Report Painter/report writer report
Tcode for Report Painter
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
5) Save and Execute.
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

  • Error in generating a report group in Report Painter

    Hi,
    I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
    Thanks,
    Louie

    There's no error when I generate the same report in a new created  group as well as when I generate the existting report group without the new created report.
    Information on where terminated
        The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
         in "FILL_RANGES_FROM_SET".
        The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
        The termination occurred in line 92457 of the source code of the (Include)
         program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
        of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
         the editor 924570).
    Louie

  • Report group and report library does not exist

    Dear Guru's
    We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
    We have to tried to import from client  '000' from transaction code GR59, But in that we are not getting 6OBU report group.
    Please help us to resolve the issue, as we required this report on priority basis.

    Dear Prashant,
    Thanks for your reply.
    The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
    Is ther any other solution to retrieve the library.
    Thanks
    Varsha

  • How to Serial No Printing in Report - group Above Report

    In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
    Reprot type : group Above.
    If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
    How to print serially with group above.
    Thanks in advance for the help

    O.Developer wrote:
    In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
    Reprot type : group Above.
    If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
    How to print serially with group above.Avoid rownum and use summary column at detail block and set following property.
    Summary function :count
    summary column : ename
    reset at : <group name>Your serial problem solved.
    Hope this helps...
    Hamid

  • Report Painter - Report group doesnot exist

    Hello Expert
    I have done the development of new report and report groups through report painter. I did the assignment of report to report group, Also i could able to access the report through T.Code GR53 / GR55 codes.
    I have done the Generate report option (Shift +F8) option through T.Code GR52 -> got the message that " Report group ZXXX has been generated". Also did the " Mass generator " and no error are found.
    I could able to assign the T.Code through SE93 in my development client. I did the trasnport the development to Unit Testing Server.
    In Testing Server, if i try to use the T.Code ... i am getting the message as " Report Group does not exist with message number - GR409. Even thou, i am able to access the report and report group directly through GR53 / GR55.
    Kindly guide me, is there any step i have missed ?
    Regards
    Anil Kumar

    Hello Eli
    Thanks for your reply,
    I did the Mass Generator option in "TEST System" also.
    I am not getting any error message & all are in "green color"
    Still i am getting the same message " Report Group Does n't Exist"
    Kindly guide to me over come the issue
    Regards
    Anil Kumar

  • Report painter:Deletion of multiple report groups

    Hi Gurus,
    I have a requirement of deleting multiple report groups and reports created through report painter since these are no more used
    I checked in options/functions available in SAP, but couldn't find any option for mass deletion of reports groups available
    I understand we can use an LSMW to do this for multiple report groups however apart from this is there any function provided by SAP for deleting multiple report groups
    Thanks,
    Gaurav

    Hi Ajay,
    Thanks for the suggestion
    I also couldn't find anything handy. In my case the time in manually deleting would have taken less than creating an LSMW for such one-off situation so just delete the obsolete report groups manually
    Thank you,
    Gaurav

  • Report Painter: How to find report group of a report?

    Hi experts,
    I have a report that a user created in report painter, I created a transaction (normal report transaction) to acess this report, but the transaction isn't executing right (I don't have the option to see the results only to print it), and I want to try creating a parameter transaction, however nobody knows the report group the report are vinculed.
    I want to know if are possible to consult the report group a report is in.
    P.S. Sorry my english, points will be awarded for good answers.
    Regards,
    Fabio Gross
    Edited by: GrossFabio on Feb 8, 2011 6:39 PM

    Thanks to all for the help, I solved my problem looking into older topics from the forum.
    To all who may have the same problem:
    1 - Go to SE93, create a parameter transaction;
    2 - Report = 'START_REPORT' / skip initial screen = 'X' / Inherit GUI attributes = 'X';
    3 - In the parameters table you will type:
         D_SREPOVARI-NOSELSCRN = blank
         D_SREPOVARI-VARIANT = blak
         D_SREPOVARI-REPORT = blank
         D_SREPOVARI-REPORTTYPE = RE
         D_SREPOVARI-EXTDREPORT = KP  01RPSCO_X                       NAME_OF_YOUR_REPORT
    4 - Special atention to the last parameter as it is the most important in this transaction, the first part (including spaces) are always the same, the last one is the name of the report you created through the CJE*.
    Regards,
    Fabio Gross

  • What is the significance of report writer and report painter

    hi all,
    can anyone throw light on report write and report painter, when and why it used with examples.
    thanxs in advance
    regds
    hari

    Dear Hari,
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
    Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
    Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
    When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
    Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
    To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
    Advantages of Report Painter include:
    Flexible and simple report definition
    Report definition without using sets
    Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
    http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards,
    Naveen.

  • REPORT GROUP tcode: gr52

    I have created a custom program and added it to a standard report group in GR52. But when i execute the Main Report group and try to drill down to the custom transaction code. The sy-tcode is still START_REPORT. Is there a setting i am missing when creating the custom report transaction. While creating the transaction i selected it as a regular report transaction.
    thanks
    Kshamatha

    YOu have to create a "Parameter Transaction"
    For "Defualt values" tab,
    transaction - START_REPORT
    Check the "Skip initial screen"
    Press one ENTER here.
    GUI support  - all 3 checkboxes
    Default values (table control at last) .. you can use F4 here for the field optoins on the screen field name
    Screen field name
    D_SREPOVARI-REPORTTYPE     RW  " < you report group
    D_SREPOVARI-REPORT     5A21 " < report
    Save and activate.
    Regards
    Naimesh Patel

  • Report Group 1SIP Consistency Check

    SAP reccomends the following to be consitency check for CO customers for system copy:
    "CO customers: An additional consistency check can be performed by running the report group 1SIP before the system copy in the source system, as well as after the copy in the target system, and then comparing the results. No customer data may be changed in the meantime."
    I have the following question:
    1. By "Running the Report Group" does SAP mean running the individual reports under the Report Group 1SIP?
    Edited by: Asim M on May 23, 2008 6:49 PM

    Hi,
    Yes, that is what is meant, i.e. report 1SIP-001 or TA S_ALR_87013611. In this case report group and report are synonymous as there is only one report assigned to the 1SIP report group (customer reports should never be assigned to SAP standard report groups). Therefore running 1SIP via TA GR55 results in the same output.
    Regards
    Karl

  • WBS element group  in Report Painter

    Hi,
    What is the procedure to insert WBS element group as parameter selection field in a report painter?
    I'm working in PS Information System / Hierachy Reports and we want to extract economic information
    Thanks!
    Sayaton

    Hi
    To create a Transaction Code for a Report Painter/report writer report
    Tcode for Report Painter
    To create a TCode, follow the steps below.
    1) Go to Transaction code SE93, Enter TCode Name and Press Create.
    2) Give short Description and select Parameter Transaction, Press Enter
    3) Select Transation Radio Button and write START_REPORT in the next text
    box Also Check the box Skip Initial Screen.
    4) On the bottom of Screen (default Values), Enter Parameters
    i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
    ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
    5) Save and Execute.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Problem in Exporting a Report Group having a Report Painter Report.

    I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
           group 0102CPDNUEA-CCROSI not transported.
           Transport groups separately if necessary.
    There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

    hi,
    I am able to export my report groups with dependent objects successfully.
    I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
      IF SY-BATCH = 'X' OR NO_LIST = 'X'.  "direct or batch
        SET PF-STATUS 'LIST'.
    *****PERFORM TRANSPORT_OBJS USING 'X'.  "transport all jobs
        IF FILE_EXP <> 'X'.
          READ TABLE WT_E071 INDEX 1.
          IF SY-SUBRC = 0.
            LEAVE.
          ENDIF.
        ENDIF.
      ELSE.                                "online
        SET PF-STATUS 'MENU'.
       PERFORM WRITE_TRANSP_OBJS.
      ENDIF.
    regards,
    ram

  • Report group / Painter Vs ABAP

    Hi,
    There are some tools in FI like Report painter/writer, by using them functional people can develop reports/ reprot group ( for ex: using txn GR51).
    If there alreday existing Z report group. Can we modify it?
    If so will it b done by Functional guys it self? or Abapers needed?
    if abapers needed, in which scenario it requires abaper's help?
    if abaper want to modify it, how can he do it?
    Thanks
    Pra

    Hi
    Everything in Report Painter/Writer can be handled by Functional consultant
    As such there is no need of ABAP Developer  for it.
    You can't change the Existing Group
    Where as you can create your own group and use.
    see the doc
    Report Writer functions can be accessed from within the Report Painter.
    The difference lies in the GUI of the report painter.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Refer the following links :
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • *Maximum report in one report group (report painter)*

    Hi SAP Experts,
    I'm doing some job on report painter, issue on this is the number of reports in one report group,because in my case I can only insert 7 reports in one report group. Is there any possible way to extend the maximum report allowed in one report group? I'm new in our SAP group & this is my first time to do job in report painter . .
    Help from you experts would be highly appreciated. .
    Thanks.  .God Bless. .

    Hi Krishma,
    You can save this workbook to your PC and email it to your user. They need to open the workbook (with Bex running in Excel). When they click the refresh button they system will prompt them to log on (if they are already not logged in) and then the queries will be executed.
    Hope this helps...

  • Help : Regarding Report Group (Report painter)

    Dear All
    I have developed a report thru report painter. But i m having doubts wy we use report group? what will be the impact if i use the report group which are already exist or else for every report we have to go for new report Group ..
    Reward for every correct ans
    Pls help....
    Rgds
    Santo

    Hi Santosh,
    A report group is generally created keeping in mind the reporting requirements and the library used.
    If u r viewing reports based on GLPCA or FAGLFLEXT, then it is advisable to group them together.
    Another advantage of creating a report group is when we run the report through GR55, then n number of reports can be seen with a single input screen.
    If two reports r using different variable, then u would have to create two groups as variables will appear as in the selection screen.
    Regards,
    Kiran

Maybe you are looking for

  • ALV  Top_of page and Top_of_list

    hi friends.. in alv, what are the events available, where can i see that.. in Alv, what is diff bt top_of_page and top_of_list and end_of_page and end_of_list.. can you explain and send me sample prg thanks in advance

  • Form builder in UCM

    Hi, We are looking for a usefull form builder i UCM/Stellent. We need to be able to capture form data easily. I have tried the web form builder it works, but it has to integrate with my web application. I have tried with an iframe but when i go into

  • Xbox 360 + HDMI

    Someone on these forums mentioned something about hooking a 360 up to a 23 inch Cinema Display using an HDMI adapter. They said they got it to work, but there was a band across the bottom of the screen that mirrored the top. How, exactly, did they ge

  • Class to support XML Config.

    Hi , I have a system that loads your properties trough a class that reads an xml file. For example ans sysconfig.xml that holds all of the system properties. Now, i need to load xml properties to another class, for example an class that read files fr

  • Will updating from Snow Leopard to Lion mess with Garageband 09?

    Hey guys, I just bought some software that requires OS X 10.7.5 so I need to update my Macbook pro if I want to be able to use it.. I just fear something happening to Garageband. Does anyone know if it'll mess with anything? I'd prefer not having to