Report on PREQ/Contract/PO

Dear All,
          Is there any report to see against which PREQ, which contract was made and sunsequently which po's were created. I want this information in a single screen.
i have checked, i think there is not std sap report like this.
do i have to make the development?
thanks

There is not straight std report available for this kind of information. either you can develpoe the custom report or you can write the query and get the information.
use the table
EBAN, and EKKO and EKPO for this purpose.

Similar Messages

  • Report to Generate contract completion certificate

    Hi,
    PLease anybody tell me how to generate the report to Generate contract completion certificate and General Variance report...
    Kindly help
    Regards.
    Aritra

    Hi Arita,
    To get this report, you have to develop the report by ABAP, which we have developed in our organization.
    Thanks & regards,
    Raghunath

  • Report for Qty Contract and Value Contract with PO release exceeding limits

    Hi All,
    Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
    Thanks in advance!

    hi Duke,
    If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
    So, there is no report for the same...
    Hope it helps...
    Regards
    Priyanka.P

  • Report For Sub Contract Material

    Dear Experts,
    Is there any standard report for finding the details of the subcontract.
    I tried through ME2O, MBLB where I am not getting the report I wanted.
    I want to take a montly report for all the subcontract work given to the vendor. (The work is completed )
    Please help. Thanks

    Thanks,
    In ME2L I am able to get the details, but the problem is;
    I want to get a report which will give me the full details of the Sub COntract PO.
    Example. I created a Sub COntract PO for Fineshed Material A. For makng Material A I need to supply Material B, Material C to the Sub Contract Vendor.
    I want to know by the end of the month
    1) The Subcontract PO
    2) Final Material (Material A)
    3) Raw materials Supplied to vendor (Material B & Material C)
    4) Status of the order
    5) Material A given back to me
    6) remaining Material (Material A)
    Please help.

  • Report on Service Contracts Authoring header level only

    Created a Discoverer report that returns most of the header level data for Service Contracts Authoring. Issue is that for Summary/Parties it is returning all contacts. I want to see if I can limit the return to what the user is seeing at the application level (Role, Name, Email etc...) for the Contacts. I have found articles that suggest main line is what I want to return but had no luck. I have tried what I thought would be other unique identifiers from the okc_contacts_v, okx_party_contact_v, but the returns for each contact were identical. Thanks for any input on this subject.

    Hi,
    Try to figure what security rule the application uses.
    you need to look at the view that lies behind the application screen.
    To do that you need to change the profile "Hide Diagnostics menu entry" for your user to: No using sysadmin.
    Then go to the application screen where you see the needed data and go to Help->diagnostics->Examine.
    enter password for APPS.
    Then chose in "Block" the SYSTEM and in "Field" Chose "Last Query".
    You'll get the sql behind the last query you made in the screen.
    Copy it to the SQL tool and start drilling into the view/s.
    Try to find the security applied in the sql and use the same in your query.
    At the end of this process you'll get the same security in your view as in the application.

  • Standard report to extract contract open quantity

    Dear Expert,
    I'm facing this problem: I'm using ME80RN to extract information about contracts but I can't find in the field catalogue the "open Target Quantity" field. I know I can find it in ME3L/M but the format it extracts data is not compliance with my needs. 
    Do you know if I can use other standard report?
    Thank you in advance,
    Fuffo

    ME3M/L use with scope of list ALV. it will help you to download in excel format
    There is no other report apart from the above, You need to go for ABAP development
    Edited by: Antony James Vijay on Mar 24, 2010 3:36 PM

  • Report of expiry contract

    Good Afternoon.
    Is there any standard SAP report that allow display the contract that  expiry in the next two week.
    The issue that i have is that can be send for mails to human resource managers automatically the list of contract that will expiry in the follow two week.
    Regards,
    Wilman

    Good Morning,
    Thank for response Anirudha.
    The question that i have is the follow:
    How i do for send this list to the human resource managers for mails?
    Regards,
    Wilman

  • Report a sales contract

    Good morning guys,
    I'm having trouble making a report of SD because it has no functional SD here to tell me some things. I'm doing a report for the Sales Contract, this report I have to pull the contract from some suppliers.
    I was using the VBAK table after I was in VBAP table, and the vendor entered on the selection screen I would go to VBPA table to pull the vendor making a relationship with the VBAK, now I do not know if this flow is correct. If anyone can help me I appreciate it.

    1. Fetch the Sales document & Item number from VBPA table based on the the input vendor pass to lifnr field
    2. Based on the above internal table, fetch the data from VBAP (If you need VBAK data then use VBAK also) for all entries of the step 1 and populate the new internal table
    3.  Display your Sales Contract data in the output of the report

  • Real Estate Report for General contracts

    Hi, 
    Can anybody please let me know the reports in RE for general contracts specifically giving the status details. Thanks.
    Regards,
    S.S

    Resolved myself

  • Reports to find contract with Open Price/Quantity

    Guys -
    Is there a report i can use to find all contracts with Open Price or Quantity? Please let me know!
    Thanks!!

    Hi,
    In the standard reports ME3x (ME3L, ME3N, ME3M, etc), did you try using Selection variant M-OFFEN?  Or you could configure one which suits your requirement in IMG> MM> Purch> Reporting> Define Selection Parameters.
    Cheers.

  • Addition of result column in SRM 7.0 POWL Report "Contracts for Supplier"

    Hi,
    We are on SAP SRM 7.0 SP08. There are two POWL reports associated with contracts i.e. "Contract for Supplier" and "Contract for Product". We want to add two fields/columns to the report (Payment Type and Responsible Employee).
    As per SAP standards, we appended two structures /SAPSRM/S_SEARCH_RESULT_CTR and /SAPSRM/S_POWL_RESULT_CTR. Feeder type "/SAPSRM/SRM_CTR_H_01" assigned to this report is not maintained in t-code /SAPSRM/POWL_CUST.
    Fields are still not displayed as column in the report. Please suggest.
    Thanks

    Hi Mudit,
    Thanks a lot for reply.
    I have done the same but getting below error:-
    Mon Aug 22 14:46:22 GMT+05:30 2011          Importing a CSV file.
    Mon Aug 22 14:46:22 GMT+05:30 2011          ..Inserting CSV data from file rtimport_29769.csv
    Mon Aug 22 14:46:48 GMT+05:30 2011          ......Record 1. Warning: Warning: the item sc0001 referenced in column CONTACT could not be found
    Mon Aug 22 14:46:48 GMT+05:30 2011          ....Import failed for object number 1. This field is required and must have a valid value. [CONTACT].
    Mon Aug 22 14:46:48 GMT+05:30 2011          ..Complete. 0 ok. 1 failed.
    Mon Aug 22 14:46:48 GMT+05:30 2011          ..Importing a CSV file. 0 ok. 1 failed. File rtimport_29769.csv
    Mon Aug 22 14:46:48 GMT+05:30 2011          Error during action failed to import data, 1 error(s).
    If I am understood correct, you have asked to use User ID of Supplier contact which i have taken from theSupplier Contact-> Account management ->Used ID field under directory inofrmation.
    I have dounloaded Masteragreement template and tried load the workbook with the data, same error is coming.
    Thanks,
    Deepak!!!
    Edited by: Deepak Arora on Aug 22, 2011 11:28 AM

  • Report on Contract

    Hi Gurus,
    I need to fetch a report standard or SQ using table to get this info-
    Contract Start date-Contract End Date- Manufacturers Warranty start date- Manufacturers Warranty end date- Sales warranty start date - Sales warranty End date- Equipment- Serial number- Equipment description- Customer Name- Sales document number (contrcat) - Contract Description- Net Price
    Can you kindly suggest some standard if not then what tables to use to make SQ query for a user to use every morning.
    Thanks in advance for taking time out and suggesting!
    Regards
    Bawa

    Hi Bawa
    Check the following standard reports related to contracts . If you are not getting the output then check the tables and fields used in the reports and then add some other required fields then you can generate your own report
    V.06  - Incomplete Contracts
    SDV1 - Expiring Contracts
    SDV2 - Expired Contracts
    SDV3 - Completed Contracts
    Regards
    Srinath

  • Contract Connection reports in LMS 3.2

    I'm attempting to run this report and it's not recognizing my id/password.
    However on my old server which is running LMS 3.1 this report runs fine. I'm not mistyping my id/password I have confirmed that I'm not. See screenshot of error is this a bug?

    This is a known issue. Development is working on it to correct the Cisco.com side so it reports the correct contracts. As of now, there is no workaround within LMS.

  • LMS 4.2.3 Contract Connection has contracts but no devices in the report

    I am performing an assessment tht includes maintenance contract information. My client entered his CCO credentials and over a dozen contracts appeared in the window. When I select just one or all of them I get no records on the report. He is able to open Cisco TAC cases on all devices and I have all of the serial numbers in the inventory so what am I missing?
    This is under Reports>Cisco.com>Contract Connection
    Thanks Karl

    Hi ,
    In order for the device to allow SNMPv3 vlan context-based queries to be processed, the
    following must be added to the configuration for EVERY vlan that you want user tracking to
    collect information on:
    “snmp-server group v3 context vlan-X” (where X
    is the vlan number)
    Perform the following on the switch to help show which vlans require this command:
    "show snmp context"
    Solution: Configure the switch to allow vlan context queries.
    I hope this will help
    Thanks-
    Afroz

  • CQ Contract types and reporting of deliveries (outstanding quantities)

    We are using document type 'CQ' Quantity Contracts for standard sales processing in part of our business.  Standard Orders are called off from the contract and thus deliveries are made to customers.  Frustratingly I cannot find any standard reports to view contracts (open or closed) and their respective deliveries and thus the open balance of the contract in one single report.  Not even in BW I cannot get at this information.  Could one of you SD guru's advise?
    I am after a report with the following columns
    Contract Number #, Material number #, Contract Qty #, Order Number #, Delivery Number #, Open contract qty #
    Many thanks
    Dan

    Dan,
    As sales orders are created from contracts and deliveries are created from sales orders, you cannot find out hte open quantities in contracts. This is not the right method also. The open value in contract only represents the quantities for which sales orders are not created. It doesnot represent the quantity which are not delivered.
    To find out the quantity which are to be delivered, please find out the list of open orders available in VA05. Once you get this list of sales orders, then you can give these sales orders as input in the table VBFA for the field succeeding document. This will give you the contract numbers using which these sales orders are created.
    Now you can total the quantity of each sales orders for one contract to find out the open quantity
    Hope this helps

Maybe you are looking for