Report Painter copy screen to excel 2007

Hi
starting point: Report Painter.
we want to copy an area of a screen mask in excel 2007(Strg C  Strg V).
The copy is not complete. column are different, grouping does not exist.
In Excel 2000 i had no problem with this.
Can anyone help me?
kind regards
Enno

Hello,
As explained by Andrew, you can please download the report painter report to excel. Then, you can do the manipulation you want in excel.
I am sorry, still I am not able to understand your question clearly. Please give some more clarification with transaction codes and the activities that you are carrying out.
Regards,
Ravi

Similar Messages

  • Report Painter selection screen field modfication?

    Hi Buddies,
    I want to modify the report painter selection screen.
    There is one field manadatory on the selection screen . I want to make it as optional.
    Please let me know if any one knows.
    Waiting for your response..
    Regards,
    Vijay

    Hello sir,
    Some one did the code. Now iam modifying this report painter selection screen.
    I would like to know where the field definition will take place in report painter.
    Regards,
    Vijnay

  • Translate report painter selection screen

    Hi,
    I have a problem.
    I need to translate selection screen of report created by report painter.
    Report name is 1SIP-001, Objeckt 1VK
    Do you know how to do this?
    Regards
    Tome

    Well, the problem is, report name is generated because it's build with report painter.
    I would like to use SE63 but I don't know what to options should I use.
    Regards

  • Report Painter -Selection Screen Order

    I am doing a Report Painter for the first time in years. 
    I am hoping someone can remind me how ( if possible) to change the order of the the selection screen.
    For example, if I have 2 Fiscal Year varables and 2 Period Variables, is there a way to change the order so the screen shows
    FY1
    Period 1
    FY2
    Period 2
    Thank you,
    Jeffrey

    Thanks,
    Your answer works when there is only one field, 2 variables.
    I have 2 fields, 2 variables each.
    So, for example with Fiscal Year and Period, I have
    zfy1
    zperiod1
    zfy2
    zperio2
    When I do the report, the Fiscal Year variables group together and then the period variables.
    i.e.
    zfy1
    zfy2
    zper1
    zper2
    I can't separate them and reorder them as above.
    zfy1
    zper1
    zfy2
    zper2
    Thank you

  • Report painter selection screen

    hi,
    may i know where to create selection screen for report painter?
    thanks
    regards

    When you create your report, in the characteristics tab you select the feilds that you want to give to the user at the time of executing teh report.
    If you check the Variable box it will be available.

  • Report Painter Copy

    Hi Frnds,
    How to copy the programs from report painter group. Here i need to copy the some programs from the report painter group.
    I need to copy from the development system to quality system.
    so, How to download the program.
    Points will be rewarded for helpful answers.
    regards,
    Balu
    Edited by: K B S Reddy on May 7, 2008 7:10 PM

    Hi Reddy,
    Check report RGRRTE00 for exporting the report and RMCSIM00 for importing.
    Hope this helps
    Thanks
    Lakshman

  • Report Painter Select Screen Character Issue

    I have a report make from report painter. In the select screen, it supposed to show in ficical year, accounting periond, controllong area, for selection, but the character could not be shown correctly,
    it show as "#####".
    Question: How can I fix the charater issue?
    Thank you in advance.

    hi
    set the optimize column width  = 'X"

  • Report Painter - copy sections

    I am doing a report with some sections in the Report Painter. Is it possoble to copy a section to a new section?
    Regards

    HI,
    no I am pretty sure its not possible to copy a section to another section. You can copy the whole report (and change/delete sections in the copy) but the first time sections need to be defined manually if no copy-source exists.
    best regards, Christian

  • Exporting a BI report to excel 2007 from Portal

    Hi,
    Any one please let me know is there any option to export a BI report from portal to MS excel 2007, the option which we have directly prompts to save in 2000/2003.
    Regards,
    Pradeep

    Hi Pradeep,
    Could you please try if following trick works:
    1. Open the report at Portal.
    2. Export it as 2000/2003 format.
    3. Open the downloaded report with your MS Excel 2007
    4. Save it as 2007 MS Excel format.
    Sorry as I haven't personally tried above but just a suggestion; Please let me know if above works or not?
    Regards,
    Anuj

  • Selection screen fields order in report painter report..

    hi experts,
    i have a  problem with selection screen fields order in report painter report.
    Actually in report painter report selection screen order is different compare to report writer report selection screen.
    how should i get the same selection screen fields order For  Report painter  report compare to Report Writer report ?
    For example, Report Writer selection screen order is:
      ledger:
      company code:
      period:
      current fiscal year:
      previous fiscal yer:
      previous quarter end period:
    where as Report Painter selection screen order is:
      ledger:
      previous fis year:
      current fis year:
      company code:
      period:
      previous quarter end period:
    please help me regarding with this.
    Thanks and Regards,
      NAGARJUNA.

    hi nagarjun,
    Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
    Ex:
    Selection fields No
    Exclude Cancelled Lots 5
    Material number 1
    Plant 2
    Material type 3
    Inspection Lot Origin 4
    Regards,
    Lokesh

  • Report painter year characterstic

    Dear Experts,
    I need to develop a report thru report painter
    2010           1     12                         
    2009           1     12
    2008           1     12
    For the above i need actual and plant
    2011            1     12
    2012            1     12
    For these two years i need only plan
    How to bring in report painter.
    I struckked up at year which characterstic  will be used for previous year(2009)/2 years back (2008) and for 2011(next year)
    2012 (next year +1)
    Thanks
    Balu

    Hi,
    create a formular variable in T-Code GS11 based on the variable "XYZ" you use as selection variable in your report (copy it from this one). Set the variable type as "formula", enter descripition eg "previous fiscal year" and define the formular as "XYZ - 1". for the next fiscal year define another formular variable like "XYZ + 1".
    Assign this variables in the rpoert painter columns where they should be used.
    On the report painter selection screen "XYZ" appears and because of formular variables the previous/next fiscal year is calculated automatically.
    Best regards, Christian

  • Selection Field in Report Painter Report

    Dear All,
    Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
    Thank in stack

    In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast),  and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
    Thank in stack
    Nilesh Shete

  • Radiobutton in report painter

    hi experts,
    i would like to ask on how to create a radio button in report painter selection screen.
    thanks.

    Hi,
    Try with following piece of code.
                       SELECTION CRITERIA                                *
    SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME .
    SELECT-OPTIONS: s_date  FOR /obiz/zxp_shphd-bol_date. "OBLIGATORY.
    SELECTION-SCREEN: END OF BLOCK b1.
    SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS : prm_rec  RADIOBUTTON GROUP radi,
                              prm_nre  RADIOBUTTON GROUP radi.
    SELECTION-SCREEN: END OF BLOCK b2.
    Regards,
    Aravind J M

  • Can't send Excel 2007 File via Send To Email Option after Acrobat Install

    Normally, you can send an Excel 2007 file via email to someone by going to the Send option on the Excel file menu and choosing "Email." This will email an actual copy of the Excel 2007 file. However, since installing Adobe Acrobat  9 pro on my computer, this option, as well as the option to send to XPS are gone -- the only email option I have on that menu is to convert the file to a PDF and email it.
    It seems to me that Acrobat should ADD options to menus but not remove any! Does anyone know how I can get those missing options (especially the one to email the actual file itself) back? I've tried Googling up a solution, but to no avail so far.
    Thanks, in advance, for any help!
    Laura

    Thanks for taking the time to respond, Aditya!
    I saw that MS support article when I was trying to solve this issue on my own, but the solutions it proposes won't work for me -- I can't set Outlook as my email client (this is a work computer and we use Lotus Notes) and I can't muck around in the registry (again, this is a work computer). I know I can attach the Excel via the attach command in the email client, but the main thing is I don't understand why Acrobat has removed that option from the Excel menu. Also, it removed the Send to XPS option (which I don't really care about, but it bothers me because it shouldn't be deleting anything)!
    I even tried adding the Email command to the Quick Access Toolbar in Excel -- it let me add the button, but, when I click it, absolutely nothing happens.

  • Report Painter/Writer: Excel 2007 Integration

    Hi All,
    I'm facing an issue with some reports I've prepared in Report Painter that are intergrated with Microsoft Excel. When I create a Report with more than 256 columns and execute it with Excel Integration it's giving an error: Run-time error '1004' .
    When I debugged Visual Basic, it seems that the standard number of columns of Microsoft Excel is less than the number I required, this was OK for Microsoft Office 2003 version. However, with Microsoft Excel 2007 the number of available columns has increased to 16384. Hence it should work, but it's not!
    Has anyone face this problem? Is this a suitable bug to report to SAP? Any idea or suggestions on how to deal with this?
    Thanks!
    Fede

    Hello Federico,
    Did you try to install SAP GUI 7.10 with correction patch level 10?
    Regards,
    Daniel.
    Edited by: Daniel Carvalho on Mar 23, 2009 12:39 PM

Maybe you are looking for

  • Oracle 10g Express Edition on RedHat linux Enterprise 4 WS

    Installed Successfully But when connecting in SQL Plus with any user sys or system or scott it gives error error while loading shared libraries : libaio.so.1 cannot open shared object file no such file or directory ORA 12547: TNS lost connect Message

  • DUMP (COMPUTE_BCD_OVERFLOW), when we are attenting to make an invoice MR1M

    We are presenting a DUMP (COMPUTE_BCD_OVERFLOW), when we are attenting to make an invoice in trans: MR1M The termination occurred in the ABAP/4 program "SAPLMRMP " in   "SPERRGRUND_T". The main program was "SAPLMR1M ".         The termination occurre

  • Database Lookup in Adobe Reader

    I have an Adobe document that performs a database lookup based on a value keyed into document.  It works fine in LiveCycle and Acrobat, but does not work in Reader.  From what I've read it looks like I need 'Reader Extensions'.  How and where do get

  • An improved Content Presenter Portlet

    I've been working on a site migration project from a content manager to Weblogic Portal, and for the Weblogic Portal site we are planning to use Content Presenter Portlet to show most of the content that already exist on that site, almost all is just

  • C'mon--how do I get around NOT printing from Firefox!!

    I feel like an idiot. I order and receive my brand new Photosmart Premium C309g one week ago, thinking I got a great new printer...only to find out I can't print a thing from Firefox, which I exclusively use. You've got to be kidding. I've been able