Report Painter (GRR1)

Hi there,
Is it possible to have selection to choose either all GL account or GL account with balance in the report painter? something related to supress zeros or not suppress zeros. Please advice.
Thanks.

Hi ShantiT,
To suppress zero rows follow the steps below:
1.  Go to t-code GRR2
2.  Select and Double click the report in the library
3.  Go to Formatting menu and choose Report Layout Sub-menu
4.  Go to the Rows tab
5.  Choose hide zero rows
6.  Save
To suppress zero columns:
1.  Go to t-code GRR2
2.  Select and Double click the report in the library
3.  Go to Formatting menu and choose Report Layout Sub-menu
4.  Go to the Columns tab
5.  Tick the suppress zero columns 
6.  Save
Thanks.
Edited by: Ellicec on May 13, 2011 10:11 AM

Similar Messages

  • Report Painter GRR1, no returning values

    Hello,
    I'm creating a report using report painter (GRR1). I need to do a Balance report, so i've been creating set's for GL account ranges. For example:
    Set 1: from: 2781174000     until: 2781176999
    Set2:  from: 4300000000     until: 4399999999
    I'm building my report using that set's in lines.. explode them and 'Til here everything is ok.
    But when i execute my report, is only shown the lines (set's) that cointains amounts on the accounts. Set's that DO NOT have any amount (the amount is zero) don't appear in the report.
    My question is.. is it possible to display that "empty" lines in report?
    Thanks in advance for helping me.
    Best regards,
    Cristina Rocha
    Edited by: cristiniti on Apr 7, 2010 7:30 PM

    Hello Christian,
    Sorry for bother you one more time.. as you said.. neverending story..
    I'm using as characteristic gl account. Now i need to use gl account on selection screen too.
    So for that I created a variable of set. In selection screen that field is available to set with gl accounts, but when I execute the report, is displayed all accounts. It doesn't respect the selection i've made by account.
    For example in selection screen:
    Account from: 1200000 account to: 12999999
    I execute report and is displayed all set accounts and not only accounts in range 12000000...12999999.
    How can I do that selection correctly?
    Thanks in advance.
    Best Regards,
    Cristina Rocha

  • Create New-GL Profit Center P/L by Report Painter (GRR1)

    Dear CO gurus
    I'd like to create P/L by Profit center level (New-GL, not EC-PCA).
    As a solution, I'd like to use CO report painter (GRR1), instead of new-gl's drill down report painter FGI3.
    I could create library by referrencing to FAGLFLEXT.
    But when I goes to GRR1, it is difficult to create report.
    So, if anybody tells me the detail step or reference side, please let me know.
    Yoshi

    Hi Yoshi San
    Process in GRR1 remains same whether you choose 8A library  or ora New GL Library
    Fgi3 is for drildown reports and GRR1 is for normal reports
    What problemproblem are you facing in grr1?? The process is same as for other reports
    Br. Ajay M

  • Filter option in Report Painter GRR1

    Dear Experts,
    I have created a report using the the T code: GRR1. The layout is as follows
    Expenditure
    Department A
    Department B
    Department C
    Department D
    Department E
    Power & Fuel
    Other expenses
    Each department having 20 cost centers. I have created the report and assigned in 1SIP report group.
    I am able to get the results in the report S_ALR_87013611.
    I am able to see the department wise costs in that report.
    My Requirement is:
    I am expecting a filter in the departments mean to say I want to select few cost centers in the department A after executing the report.
    I am expecting a filter in the column heading.
    Is it possible. Please guide me.
    Thanks

    Dear Experts,
    Thanks for your responses,
    I hope my requirement is some what critical through report painter (Filter Option).
    Please check the following, is it feasible?
    Expenditure
    Department - A
    Department - B
    Total - 20 cost centers
    Total - 10 cost centers
    Cost center
    Rs
    Cost center
    Rs
    Salaries
    Cost center A1
    1000000
    Cost Center B1
    700000
    Tours & Travel
    Cost center A2
    200000
    Cost Center B2
    140000
    Machine Expenses
    Cost center A3
    6000000
    Cost Center B3
    4200000
    Repairs & Maintenance
    Cost center A4
    70000
    Cost Center B4
    49000
    Labour
    Cost center A5
    800000
    Cost Center B5
    560000
    Total
    8070000
    5649000
    I am going to hard code the cost center group in the cost center report.
    I am expecting the report result as mentioned above.
    Is it possible.....?
    Thanks.....

  • Report Painter GRR1 table CCSS cost centers actual/bud by period wise

    Hi,
    I have developed Cost Center Actual/Budget Report by period for 12 months (Jan to Dec in columns) in each columan I have hardcoded period e.g. for Jan (01) Feb (02) till Dec (12-12) for one of coulmns given as variable From Period to To Period as vairbale to choose user in selection criteria (1PERIV-1PERIB). while executivng the report system is givng results for whole (12)periods in the output, even my selection criteria from period 1 to 3.
    Please advise any body how can I restrict by period wise.. e.g. if I select from period 1-3 it should show for only 3perios.
    Thanks in advance!!
    VS Rao

    Hi Kumar,
    I have done below steps to my CC Report to show by period wise(individual columns Jan, Feb, so..on) cost center report:
    Step 1: used Library 1VK, Table CCSS in GRR1.
    Step 2: Created 12 individuals columns starting from Jan to Dec..
    Step 3: Created 12 formula variables(internal Variables) for 12 periods..(becoz if I hardcoded system is deriving all the  
                 periods)..
               a) created Internal value Variable ZVAR(defaualt 01),ZAR1(default 02),ZAR2 (default 03)...this is for to create fomula
                   variables.
               b) for period 1(jan) formula variable  "IF '&ZVAR'>= 1 THEN 1 ELSE 017" internal variable table:CCSS,field:PERBL
               c) for period 2(feb) IF '&ZVA1'>= 2 THEN 2 ELSE 017 like wise created 12 variables for 12 periods
    Step 4: above the formula variables I have selected check box as variable but not coming on selection screen, I need in
                selection screen from period to period for this I have created one more hide column and given period vairable "1PERIK"
               now its coming on the selection screen but values are not populating based on by selection criteria..
    Note: If I slect 1-4 periods it should show for only Jan,Feb, Mar & April  and individually..
    Please sugget above my formula is correct or not!!  appreciate your valuable suggesion!
    Thanks
    VS Rao

  • SAP Report Painter - GRR1

    Dear SAP Expert
    Can you help me on below issue?
    I developed one CO-CCA report (TC: GGR1)
    Data is OK but now I am facing issues in format.
    Format Group              0                   0
    Lead Column              Jan                 Feb
    Sale                          10,000           90,000                 
    GP                               4,000           30,000
    GP Margin %              40.00             33.33
    The requirement of this report is to view values in scaling of 000 (Thousand)
    While executing this report user is using column format scaling in 000 and decimal 0
    Implication on report
      Amount values are OK (Sales and GP)
      but Calulated GP margis is almost showing ZERO due to 000 scaling format option.
    I am looking for solution where I can format only selected special rows with decimal 2 format and scaling 1 format
    Please assist and advice.
    Regards,
    Prashant

    Dear Ajay,
    Its clear to me that you have understood my requirement and reached near to solution.
    Option 1  Change formula by adding 000 - I tried but it will not meet my requirement.
    Option 2 Hard Code the scaling option in form defination itself (GRR2) - I checked GRR2 but could able to find option for hard code, can you please assist on this?
    Additionally I noticed when I selected row like "GP MARGIN %" and right clicked then I get option NUMBER FORMAT when click this option I get window box option NUMBER FORMAT with sub heading "GP MARGIN %" as FACTOR and Decial Scalling - I selected this scalling but i think it is not getting applied. Possible reason due to column number format leading the settings.
    Looking for your advice.
    Best Regards,
    Prashant Rane

  • GRR1 report painter how to explode at GL account level ?

    Dear Experts,
    I am preparing a balance sheet using report painter GRR1. in the characteristic i assigned the group account number and set as explode. however when i see the report it is exploded at group account number only asterisk level i set is 01. do you guys have any idea how to explode at GL account level? do i need to define asterisk level upto 03 ? if yes how to create asterisk level ?

    Hi,
    For each head like Trade Receivables, Trade Parables, etc, Did you explicitly maintain the GL acct. range by selecting 'Account Number' as Characteristics in that line?
    Thanks,
    Nirav

  • General Hierachy in Report Painter

    All,
    Is it posible to use my own hierachy create in transaction MCK1 in Report Painter ( GRR1 / GRR2 )?
    If yes, how can I do it?
    Pat.

    Hi Patryk,
    with MCK1 you create hierarchies for MM areas. These hierarchies cannot be used within Report Painter.
    Best regards,
    Daniela

  • Report painter-want to hide period columns dynamically if the period is not closed

    Hi All,
    I have made report with 12 columns like JAN, FEB till DEC in report painter (GRR1)
    Requirement is that if say, currently only period no.4(APR) is closed and we are in period no.5( MAY) or system date is in MAY, then the report should not show the data for the current period no.5(MAY), eventhough data is there. Or else it should show data for JAN to APR (closed periods)
    For this I defined 12 different period formula variables in GS11, based on system paramters like
    S008 Year (from Local System Date)
    S002 Month (from Local System Date)
    S003 Day of Month (from Local System Date)
    S012 Current Period in Current Year (per CO Fiscal Yea
    But the issue is that eventhough the variable is defined as formula variables, still the default values are given by system and default value only getting passed to the report and thus data is displayed for the unclosed period.
    But SAP help says that formula variables are without default values unlike the value type variable.
    Any help in this will be highly appreciated.

    Hi All,
    I have cracked it and got the solution with redefining the formula variables.
    Details
    JAN
    FEB
    MAR
    APR
    MAY
    JUN
    JUL
    AUG
    SEP
    OCT
    NOV
    No.of days in each Month
    31
    28
    31
    30
    31
    30
    31
    31
    30
    31
    30
    day number in year
    31
    59
    90
    120
    151
    181
    212
    243
    273
    304
    334
    result available after 15 days
    47
    75
    106
    136
    167
    197
    228
    259
    289
    320
    350
    Formula variable definition for 11 months in current year
    ZTPFR01
    ZTPFR02
    ZTPFR03
    ZTPFR04
    ZTPFR05
    ZTPFR06
    ZTPFR07
    ZTPFR08
    ZTPFR09
    ZTPFR10
    ZTPFR11
    IF '#S005' <47 
    IF '#S005' <75
    IF '#S005' <106 
    IF '#S005' <136
    IF '#S005' <167
    IF '#S005' <197
    IF '#S005' <228
    IF '#S005' <259
    IF '#S005' <289
    IF '#S005' <320
    IF '#S005' <350
    THEN 1
    THEN 2
    THEN 3
    THEN 4
    THEN 5
    THEN 6
    THEN 7
    THEN 8
    THEN 9
    THEN 10
    THEN 11
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0
    ELSE 0

  • No Program generated after creation of new report via Report Painter

    Hello,
    I have created a new report after copying an existing report from report painter GRR1. The new report has also been assigned to a new Report Group relevant to the same library.
    There is no Syntax error. The only change has been to the Title of the report.
    However when I am trying to execute the report nothing happens. ABAP found that no program has been generated by SAP for this mew rpeort. We confirmed this by searching with my user ID in table TRDIR.
    However there is no trace of it.
    We have tried to execute the report from GRR3 & GR53 (report group). The report & report group is having the same attributes as the old one.
    Unless the report is in executable stage we are not able to go to the Selection screen & finally from the Technical Information to the program name.
    Please could you let me know what can be the possible cause for this & how can we resolve the same.
    Thanks & Regards
    Shreenath

    @JoeSchmoe115:  Thanks for your suggestion.  Using a web service or WCF service would still mean dealing with potential timeouts for very large reports (granted you can adjust those timeouts).    
    I think an approach using a console app could work, but rather than having the web app spawn it, an alternative would be to do the following:  (1) have the web app insert report generation requests (including all necessary report parameters) into
    a database table, and (2) have a console app, periodically invoked by Windows Task Scheduler, which reads that database table and then uses the SSRS API as you describe to generate the report, save the byte stream to a file, and finally send
    the e-mail notification to the user.  
    mkedwards
    What you've described will work but saving report generation requests in separate table may not be necessary. I don't have much experience with web services but can they just spawn C# console app with needed parameters and exit without waiting for console
    app to complete?
    The positive side of using database to store report generation requests is that you would have complete log of all requests. Your console app can then update database with completion status.

  • Transaction code for Report painter

    Hi Experts,
    I have created reports using Report Painter (GRR1).
    I want to create Transaction code (TCODE) for reports which was done using Report painter.
    Could you please help me how to do this.
    Thanks in Advance
    Regards
    Bujji

    You can follow following steps :
    1) goto SE93 -> ENter a name for tcode
    2)Define the Transaction Code as a Parameter Transaction
    3)in the default values for selection-screen block enter the Transaction as 'START_REPORT' .
    4)Check skip initial screen , inherit GUI attribute
    5)In the default values ->name of screen field,   use F4 help to select D_SREPOVARI-REPORTTYPE
    6) Against this field ,in the value column Enter 'RW' .
    7) again in  next row of  name of screen field select D_SREPOVARI-REPORT
    8) as in step 6 ,enter the name of your report Group to which you haev assigned your Report.
    Save and test the TCode.
    This should resolve your problem.

  • Report painter report can not drilldown

    Dear all,
    I created a report using report painter(GRR1), the library is IVK.
    however, I found that this report can not drilldown to the item details, would anyone tell me am I missing something? thanks.
    Ben

    The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
    AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
    SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
    SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

  • Report Painter, G/L account as characteristic and data selection

    Hi experts,
    I'm creating a report on report painter (grr1) and i'm using as characteristic gl account. Now i need to use gl account on selection screen too.
    So for that I created a variable of set. In selection screen that field is available to set with gl accounts, but when I execute the report, is displayed all accounts. It doesn't respect the selection i've made by account.
    For example in selection screen:
    Account from: 1200000 account to: 12999999 
    I execute report and is displayed all set accounts and not only accounts in range 12000000...12999999.
    How can I do that selection correctly?
    Thanks in advance.
    Best Regards,
    Cristina Rocha

    Hi RD,
    At first check the release strategies for errors under the below path :
    Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with Classification -- Check release strategies.
    Rectify the error and also check in CL24N.
    Did u check in simulation under the below path :
    Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with ClassificationSet Up Procedure with ClassificationRelease Strategies--Relase Simulation
    Regards
    Ramesh Ch

  • Need Help Using the Report Painter

    Hi experts,
    i'm using report painter GRR1, how can i resize the Lead Column? i need it to increase its length, i had already maintained the texts(short middle and long texts).
    Thanks for the help,
    zryxel

    Go to FORMATTING > COLUMNS > Select the Format Group and Edit Column Width.
    Reward points if useful.
    Salamat!
    AJ

  • Amount auto add 100 amount in report painter when I upload budget from KP06

    Hi expert,
    Would like to seek help, I wonder why the report painter (GRR1) display the amount by all cost element adding 100 for the budget when I upload budget KP06?
    Please help.
    Thank you.
    Regards,
    Karen

    Hi,
    Thank you for the prmpt reply.
    However the link is not working, between would like to seek for your help to advice query as below:
    Hi,
    Thank you for the promt reply.
    1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
    which variable should i use?
    2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
    For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
    3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
    4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
    5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
    Please help.
    many thanks

Maybe you are looking for