Report PS to check by WBS group

Hi All,
Can we use WBS group rather than project definition in SAP PS report ? I am trying to find the standard report to use WBS group...but cannot find.....
please help.
cheers,
Nies

I've used WBS groups for allocations/periodic reposting and planning purposes but never for reporting.
For reporting can create variants which already have the selection parameters filled in. Use multiple selection on WBS field to include/exclude WBS's.
Regards
Sreenivas

Similar Messages

  • Report to check Standard WBS link to which standard network and activity

    Dear All,
    Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
    Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
    Thank you.
    Nies

    Hi,
    Please try this:
    1. Tcode : CN41
    2. Change database profile: In that in the origin check mark the Standard structure. Continue..
    3. At the bottom of the selection screen check mark the standard structures.
    4. In the selction area for the Project hit F4 and  select the project based on the standard WBS Element.
    5. Exceute the report.
    Hope this is useful.
    Reward points if found useful.
    thanks..

  • Generate report to show all users and groups in Shared Services in EPM 11x

    Hi,
    Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
    ~Adeeba

    Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
    ~Adeeba

  • REPORT - want a po report , service po as per mtrl group , meterial type.

    Dear Guru,
    This is the requirement pls guide to me ,how to map in sap.
    Reports:
    PO by material type, material group and service type required.
    Thanks and Regard,
    Sai.

    hi,
    You can't get all 3 in the one report...material is never entered at the PO level.. it is defined at the MMR field MTART and table MARA...
    For material group you can have a report ME2C....
    For exteral service see the report MCRV3...but still there is no service type in it...
    Ask the ABAP consultant to have a link between them and generate a new Zreport...
    Regards
    Priyanka.P

  • Report as per Customer Account Assignment group or Material Account Assig

    Hi,
    I require report as per customer account assignment group or material account assignment group.
    Can you please tell me how to fullfill this requiremetn.
    I have go for ZReport or any standard report is available.
    Regards,
    ch.srinivas

    Hi,
      You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
    Regards
    Karan

  • Is this Oracle Reports bug – "break order property" in "group above" report

    Is this Oracle Reports bug – “break order property” in "group above" report
    Could anybody confirm that in "group above" report, we could only order the brake column's values with ""none" or "ascending" or "descending" provided by "break order property"?
    In the following example, “Dept” is brake column. Oracle Reports allows us to order values in “Dept” with “descending” provided by “break order property”:
    Dept 30
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 20
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 10
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    or “ascending” provided by “break order property”:
    Dept 10
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 20
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 30
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    I need to do:
    Dept 20
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 10
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Dept 30
    job ename salary
    xxx xxx xxx
    xxx xxx xxx
    Could I do this? Could anybody confirm that we could never ever do this, or If yes, how?
    Millions of thanks for advice.
    M.Z.
    Edited by: jielan on Sep 18, 2010 8:23 AM

    Why should that be a bug? You have a custom requirement and have to find a way to fulfill it. But, what is your actual sorting order? Do you have only this three departments? If so, you could add an addtional column in your query like
    DECODE(DEPT,  20, 1, 10, 2, 30, 3, 4) SORTINGput that column in the same group as dept and sort after that new column.

  • How to check vendor schema group for info record for third party vendor

    Hi Expert,
    How to check vendor schema group that assigned in info record for third party vendor?
    Thanks

    Hi,
    Vendor schema group is not assigned in info record, It is assigned in purchasing data view of vendor master ( Check in XK03 )
    You can check in Vendor master- XK03- Purchasing data.
    hope it will help u.
    Deepak

  • Payment Wizard - Recommendation Report - Prints Un-Checked Lines

    Hi,
    I am running the Payment Wizard and when I get to step 6 (Recommendation Report) I un-check some of the Payments. When I click the Print Preview or Print icon, it previews or prints, but it shows all of the payments that I have, including the un-checked payments. I tried to find the field / variable of the check box or any filed / variable that I could use to determine if the payment / line is checked or not and I couldn't find one. Can anyone help?
    Thanks

    That rings a bell.  If this client has not yet been lived yet but it start with 2005 version, some configuration may not been correct in the first place.
    You may need to restore current db to test environment to do more testing to find the real issue.
    Compare to working one to find the differences.

  • Report for Void Checks

    All FI Gurus,
    I would like to know if there is a Report for Void Checks with reason codes.

    Hi Gurus,
    My issue is more relevant to voided payroll checks - The payroll check register (FCHN) lists checks that were voided but it doesnu2019t show the u2018Amountu2019 voided (column Amount Paid (FC) ). I need a list of all voided payroll checks for a selected period with the amount voided as it needs to match what the bank says was stopped.
    Any suggestions? Many thanks!
    - Tarun

  • Report/Program added to a request group

    I just noticed in my environment that whenever i add a report or program to a request group i don't get to see it when i want to run/submit the report or program.
    What could be the problem?

    try use
    CREATE OR REPLACE PACKAGE fnd_program AS
    -- Procedure
    --   ADD_TO_GROUP
    -- Purpose
    --   Add a concurrent program to a request group.
    -- Arguments
    --   program_short_name  - Short name of the program. (e.g. FNDSCRMT)
    --   program_application - Application of the program. (e.g. 'FND')
    --   request_group       - Name of request group.
    --   group_application   - Application of the request group.
    PROCEDURE add_to_group(program_short_name            IN VARCHAR2,
                        program_application          IN VARCHAR2,
                        request_group                 IN VARCHAR2,
                     group_application             IN VARCHAR2);for example
    begin
    fnd_program.add_to_group(
            'XXSHORTNAME',
            'XXPROGAPPL',
            'All Reports',
            'SQLAP'
    end;

  • Report folder permission can not add group

    after upgrade to 11.1.1.2.0 ,when set report folder's permission, in the group list ,can only see "Administors", no other groups created by myself.
    how can i add other groups to this list?

    You are upgrading from which version to 11.1.1.2.0? Have you ensured that these groups are present in your LDAP?

  • Moving the Reporting Services and Report Server DB into AlwaysON Availability Group

    I have configured the new set of SQL 2012 AlwaysOn Availability Group and need to move the SSRS and it's Report Server DB into that Availability Group.
    Can anyone give tell me the steps to do this move?
    Can I just backup the ReportServer DB into the AG server then import that DB into the SSRS running on the new AlwasyOn AG SQL?

    Hello,
    Based on your description, it seems that you want to move the Report Server database to a different server. If so, both the reportserver and reportservertempdb databases must be moved or copied together. You can move the databases by using Detaching
    and Attaching or Backup and Restore.
    What's more, you should also backup the encryption keys for the report server database you want to move and then restore to the new server.
    You can configure report server databases in Always On Availability Group to be part of a replica; however Reporting Services will not automatically use a different replica for the report server databases when a failover occurs
    Reference:
    Moving the Report Server Databases to Another Computer
    Reporting Services with AlwaysOn Availability Groups (SQL Server)
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • WBS element from WBS group

    Hi
      I want to know if there is any FM or table which gives me all the WBS elements under WBS group?
    Thanks

    1) call the function module CALL FUNCTION 'G_SET_GET_ID_FROM_NAME' with the WBS group as input and the output will be setid.
    2) call the funtion module G_SET_FETCH' with the input as setid and the output will be two different internal tables values ans nodes.
    3) Loop at the values internal table that will have the WBS element range values, that means the range as from WBS element value to WBS element.
    4) Loop at the nodes internal table and for every loop value call the function module G_SET_FETCH again.So the output will be nodes and values are internal table, where the again you will be collecting the WBS element value,
    Below is the code.
    Types declaration
      TYPES: BEGIN OF ltype_wbs,
              value_fr   TYPE rgsbv-from,     " To hold WBS values
              value_to   TYPE rgsbv-to,       " To hold WBS values
             END OF ltype_wbs.
    Internal table declaration
      DATA : lt_values    TYPE STANDARD TABLE OF rgsbv,
             lt_nodes     TYPE STANDARD TABLE OF rgsb1,
             lt_nodes1    TYPE STANDARD TABLE OF rgsb1,
             lt_wbs     TYPE STANDARD TABLE OF ltype_prctr,
             lw_wbs     TYPE ltype_prctr,
    Work area declaration
             lw_values    TYPE rgsbv,
             lw_nodes     TYPE rgsb1,
    Local variable to store the set ID.
             lv_id        TYPE sethier-setid.
    Ranges                                                              *
    RANGES:      r_wbs               TYPE RANGE OF rgsbv-from,
          r_wbs_wa            LIKE LINE OF r_wbs.
    get the set ID from the name.
      CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
        EXPORTING
          shortname                = p_pcgrp
        IMPORTING
          new_setid                = lv_id
        EXCEPTIONS
          no_set_found             = 1
          no_set_picked_from_popup = 2
          wrong_class              = 3
          wrong_subclass           = 4
          table_field_not_found    = 5
          fields_dont_match        = 6
          set_is_empty             = 7
          formula_in_set           = 8
          set_is_dynamic           = 9
          OTHERS                   = 10.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Get the values from ID
      CALL FUNCTION 'G_SET_FETCH'
        EXPORTING
          setnr            = lv_id
        TABLES
          set_lines_basic  = lt_values
          set_lines_single = lt_nodes
        EXCEPTIONS
          no_authority     = 1
          set_is_broken    = 2
          set_not_found    = 3
          OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      IF lt_values IS NOT INITIAL OR lt_nodes IS NOT INITIAL.
        LOOP AT lt_values INTO lw_values.
          lw_wbs-value_fr = lw_values-from.
          lw_wbs-value_to = lw_values-to.
          APPEND lw_wbs TO lt_wbs.
        ENDLOOP.
        LOOP AT lt_nodes INTO lw_nodes.
          REFRESH lt_values.
    get the values from ID
          CALL FUNCTION 'G_SET_FETCH'
            EXPORTING
              setnr            = lw_nodes-setnr
            TABLES
              set_lines_basic  = lt_values
              set_lines_single = lt_nodes1
            EXCEPTIONS
              no_authority     = 1
              set_is_broken    = 2
              set_not_found    = 3
              OTHERS           = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
          APPEND LINES OF lt_nodes1 TO lt_nodes.
          LOOP AT lt_values INTO lw_values.
            lw_wbs-value_fr = lw_values-from.
            lw_wbs-value_to = lw_values-to.
            APPEND lw_wbs TO lt_wbs.
          ENDLOOP.
          REFRESH lt_nodes1.
        ENDLOOP.
      ENDIF.
    Range for profit centers in the table t_prctr_cc
      LOOP AT lt_wbs INTO lw_wbs.
        r_prctr_wa-sign   = c_i.
        r_prctr_wa-option = c_eq.
        r_prctr_wa-low    = lw_wbs-value_fr.
        r_prctr_wa-high   = lw_wbs-value_to.
        APPEND r_wbs_wa TO r_wbs.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM r_wbs.

  • What table storing controlling area from C.Element, wbs group?

    Hi All,
    Greeting.
    In my project right now, I need to bring over data Cost Element Group and WBS Group to BW.
    In order to cater this, I fetch data up from setHeader and setLeaf tables.
    My Question is how to get information about controlling area that belong to those object, because when I see org. unit field on the table (setHeader table), it's populated with different value with controlling area that I see on their t-code (KAH3 and KJH3).
    Is that any table storing controlling area seen on t-code: KAH3 and KJH3 ?
    Really need your help.
    Thanks a lot and have a good day,
    Best regards,
    Daniel N.

    Hi Daniel,
    It does not work this way. If you want to extract the controlling area of the obejcts you have to go to the relevant tables of the master data, e.g. for cost elements - CSKB, WBS - PRPS, etc.
    Regards,
    Eli

  • Looking for good tool to report on unused Mailboxes, unused Distribution Groups, and unused Public Folders

    I have evaluated the following products.
    Quest (Dell) MessageStats
    Enow
    StealthAudit
    StealthAudit looked to be the best as they also group like mailboxes with like permissions for Office 365 migrations, but this was by far the most expensive.
    We are looking to clean up our environment to eventually migrate to Office 365.  Any advice on a product that would report on unused Mailboxes, unused Distribution Groups, and unused Public Folders that would be great.
    d

    Hi,
    In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
    Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
    Use the cmdlet below to get publicfolder's last access time.
    Get-PublicFolderStatistics |fl name,LastAccessTime
    Get all distribution lists used over last 30 days.
    Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

Maybe you are looking for

  • CSM command similar to CSS sticky-srcip-dstport

    Is there a command in the CSM similar to the CSS command sticky-srcip-dstport? If thre isn't...is there still a way to do something similar on the CSM?

  • Case-insensitive searches on lob

    Hi, I work with oracle 10 on linux. I have a table with clob. I need to do case-insensitive searches on this field. How can I do? I can't use upper or lower function.

  • Can't open bookmarks in new tab

    About ten days ago, I stopped being able to open bookmarks in a new tab. In fact, if I right click them at all, I get a tiny gray box. It goes away with a reset, but if I try to install any of my old add-ons (even ones I install newly) it comes back.

  • Stuttering Fade Effect

    You can see what I am working on here: http://www.slimscents.com/newsite/ (under development). What happens is this... Rolling over a div creates a fade effect on a target div, and it works. However (especially on IE 7) rolling over another div whils

  • Revision level in cFolder Documents

    Hi All, We are exporting the documents from R3 system to cFolder. We are using revision level for DIR in R3 side. Now while exporting the documents with this document type, we want to capture revision level attribute on document in cFolder. Does stan