Report requirements based on cal day and calmonth

Hello friends,
I have to create a report in which it should show me the daily quantity produced and the average quantity of the given month.
In report it should show me the daily produced quantity for the given month and the average of the month.
as this is a web template requirement i need the report as shown below.
For ex : Cal month     01/01/2007 02/01/2007 .......31/01/2007
quantity                           100        110                 80
Average                             -
         100
When i tried to create a report it shows me the daily average but i need only the total average.
Can some one help me as this is my daily issue i need to solve it before deadline please!!!
Points will be assigned
Thanks
Srini

Similar Messages

I cal day and end hours in week view

I just installed Tiger and am having trouble getting the hours that I want (7 a.m. to 8 p.m.) to only show in my week view. I followed the iCal help and set it up under preferences, yet is shows the day starting and ending at midnight. Help?

Mark, welcome to the discussions. This feature of iCal is misleading - and not particularly useful. No matter what you set in the preferences there will still be 24 hours in the day, and all will be visible (though you can control how many are simultaneously displayed. Your 7am to 8pm setting controls which part of the display iCal lightly shade, and which part it leaves unshaded.

Report Requirment based on different Balance sheet type

Hello Experts ,
                          As per our client requirment we have created a Standard financial statement report using   0FIGL_VC1 and using datasource 0FI_GL_6 , Now as there are four type of balance sheet define in S_ALR_87012284 transaction in ECC R/3 in special evaluation tab ,these are
1          Standard financial statement
2          Flow of funds analysis
3          Balance sheet accounts like type 1; P+L accounts like type 2
4          Opening balance
We are giving report only for "Standard financial statement " , Now our client require all other report with 3 remaining balance sheet type . Can any body tell me how i can provide the report based on Balance sheet type . or how i can create diiferent report based on balance sheet type defined in S_ALR_87012284 . Please suggest me the best possible way to do this .
Thanks
Amit

This is the query which I am using to build a report
SELECT
rollup_timestamp "Date",
max(decode(target_guid,'199F0B201A3D71A63040BADFAA4F9E90',average,0)) host1,
max(decode(target_guid,'3FB1329F59339C07E11304B69DC4E594',average,0)) host2
FROM "sysman.MGMT$METRIC_DAILY"
WHERE
(target_guid='199F0B201A3D71A63040BADFAA4F9E90'
or
target_guid='3FB1329F59339C07E11304B69DC4E594')
AND
metric_name='Load'
AND
metric_column='memUsedPct'
AND
rollup_timestamp >= to_date('01-10-2009','dd-mm-yyyy') and rollup_timestamp <= sysdate
GROUP BY rollup_timestamp
ORDER BY "Date"
And for your previous question I couldn't even create a page.
Regards
Balaji
Edited by: user7290747 on 6/01/2010 16:17

Filtering report data based on user login and Parameter fields

Post Author: mronquillo
CA Forum: General
Hi,I am running a report that filters data based on the user login. To do this, I created a formula called @user that compares the login name (using the CurrentCEUserName field) and returns the user's name. If the user login is not a login specified in the if statements, it returns the parameter field "user_name":For example: if CurrentCEUserName = "loginname1" then "User's Name 1"else if CurrentCEUserName = "loginname2" then "User's Name 2" else if CurrentCEUserName = "loginname3" then "User's Name 3" else if CurrentCEUserName = "loginname4" then "User's Name 4".. .else {?user_name} In select expert, I have a condition which filters data based on the string returned from that formula:{Table.Name} = {@user} This works fine and when the users run the report they only their own data. However, they are still prompted to choose a parameter field regardless if of the value returned by the @user formula. Oddly enough, regardless of what parameter field they choose, they will still only see their own data (i.e. if John chooses "Bob" from the parameter list, he will still only see John's data.)If I remove the "else {?user_name}" line from the @user formula, then the users are not prompted anymore. However, if they are not a "valid" user - that is, if any of the if statements in the formula are not true for their login name - then they will see no data. What I want to do is make the report ONLY prompt the user to choose a parameter field if their login name is not "valid". That is, if the @user formula is able to return a string value for their login name, then they will jump right into the report without being prompted to choose a parameter - otherwise, the user will be prompted to choose a name from the parameter list. I thought my formula would allow this (hence the "else" clause), but it seems that if a parameter field is present in any formula, then the report automatically prompts the user to choose a parameter. Is what I am trying to accomplish possible in CR (I'm using CR v10.0) or is there a better way to do what I am trying to do?Thanks in advance.

Post Author: sharonmtowler
CA Forum: General
try, or something like that
(if CurrentCEUserName ={?user_name} then true else ({Table.Name} = {@user}) )

Time Report required to capture clock in and clock out.

Hi All,
We have requirement where in we need to present the following details in the report to the client:
1) Clock in
2) Clock out
3) PLanned working hours
Pls let me know if there is any standard report for the same or any sap query that can be copied and used.
We are using negative time management with the Time management status as 7.
Points would be awarded.
Thanks,
Deepali

Hi Deepali,
RPTCORDBVIEW (Display Clock-In/Out Corrections (Database)): You can use this report to view all information about the clock-in/out corrections that have been entered.
Could you please follow the link bellow for more the details:-
http://help.sap.com/erp2005_ehp_03/helpdata/EN/79/e71940a65ec442e10000000a1550b0/frameset.htm
Hope this info was helpful to you..
Regards,
Sagar.

Reporting Requirement based on Key Date

Hello Team,
My Requirement is , User is giving a key date & I have to find the Fiscal year corresponding the date keyed in , calculating all the fiscal periods last date & then restricting a key figure with every fiscal year period last date.
To achieve this , I have created a 1 Manual input variable on 0Calday & then 12 Customer exit variables each for last date of each fiscal year period.
Now my issue is as 0CalDay is not mapped from anything from Source.
So how should I prompt user to key in date .
Please suggest .
Thanks in advance.
Regards,
Pankaj

Are you sure you want to use "Key Date" entry in Query? Because it works with Time dependent Master data only.
If you just want to enable user entry, you can follow Arun Thangaraj 's reply.

Report requirements with Average value , forecasting value & Prod Quant.

Dear Friends,
I need a help in Reporting.
The reqirement is like this:
1. I need to display the daily production quantity.
2. Also the Average value of the Production quantity for a month.
3. And the Forecasting value for the first day of next three months.
4. Restricted Cal month on filters with variables and calday in columns and
keyfigure in Rows.
I have tried to calculate the Average but as the report is based on cal day it gives me the average value for all cal days. But i need it for the entire month.
Plz help me in solving this report with your golden ideas!!!
Thanks in Advance and Points will be assigned!!!
Thanks
Sri

Hi,
Thanks for your early response.
Actually i am unable to use tcode: KKBC_ORD rather able to use KKBC only.
Using KKBC (Target/actual/production variance) and activating collective order from setting option only able to see the details for a particular leading production order only relating toa particular period .
My requirement is to display all the production orders settled in a particular period along with (Material code /order number/ Qty/Actual value and variance value).
Note: If any leading order exists then that should be collective order i.e.(value and Qty should come against the leading order number).
If there is any standard tcode exists please let me know else provide the tables and logic to bui;d up such a report.
Regards,
Ramakanta

Report for current day and current month

Hi gurus,
i 've a report, where i 've to display the values for qty and cost of the material for the current day and current month
HOw can i do this in BEx Query designer..If any document plz share
thanks
rakesh

hi Kolli
here i want to filter the data on system date,
i wnt the report to pick the date dynamically based on the system date.
but i think restricting on calmonth and calday is not going to solve my scenario..
rakesh

Arrear days and deduction days in a hr report

Dear Abapers
i have to generate a monthly report in HR .requirement is i hve to clucluate his arrears days and deduction days.suppose an employ has not come in 29th of the current month in his pay he is considered as present and gets paid for it as pay period is taken up to 20th only.and when runnign next month that absebt day pay has to be deducted if he has nt regularised,and if he has z0 in his absence and not paid this month and got regularised next month then that has to be paid as arrear days.
can any one help
regards,
suhasini

You can use WPBP table in Pc_payresult for the calculation of the same.
Afrasyab

How and where I can build the logic to calculate between cal days?

Hi
I have the cube having data like below. When I run the report based on calendar day as input, I would like to get output data how many Line Items based on my selection (status, Trans status) from between calendar day to calendar day+150 days.
0Calday     Sold-to-Party           Status                 Trans No     Trans Status      Line Items
03.10.2008     2000028074     50     216270          28                       1
05.11.2008     2000024917     40     216281          15                       1
06.10.2008     2000006277     33     216292          28                       1
15.12.2008     2000019927     33     216303          10                       1
If I provided calendar day as input at query how and where I can build the logic u201Cbetween calendar days to calendar day+150 daysu201D?
For example, If I run a report as caleder input 03.10.2008 with selections status = 40,33, Trans statu =15,10, with above data, I can get the output below.
05.11.2008     2000024917     40     216281          15                       1
15.12.2008     2000019927     33     216303          10                       1
Please help me to build the above logic?
Thanks,
Mannev

Hello,
There are some informtion in SDN that can be useful regarding customer exit for variables in BEX, for example:
need clarification on BEX variable usage in customer exit.
you can also try to use the variable offset:
variable offset in Bex
Best Regards,
Ricardo

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads" and "report a problem" page NEVER loads, no email contact. Please help

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads".
When you go to "Report a problem" next to the item (Great Gatsby) on the email invoice or on the online account - it takes you to online support - if you elect problems with iTune downloads the page NEVER opens... no email contact. Please help

This is bad - I have an Apple automated response that they got my report on 12/6, 12/10 and 12/14, and I haven't heard anything from them since the 6th when I got one reply that told me to do things I tried before reporting the problem. Between the 6th and 10th I replied to their response 4 times and they ignored me, forcing me to report a problem with two more items that wont download but getting no response.
How do they get away with this kind of behavior, especially for someone with FIVE Core 2 Duo macs and thousands of dollars of of iTunes store purchases? I'm getting really ******.

Restrict access in report based on compnay codes and cost centers

Hi,
We are using a standard report, which is assigend to a Z transaction and assigend to the role.
The report need to be restricted based on the company code and cost center ?
but i could not find any AUTHORITY- CHECK statements in the code ( there is only authority check statement for object G_803J_GJB which has authorization groups and aCTVT field.)
Please let me know what steps need to be followed to restrict the report based on company codes and cost centers.
Thanks for your help in advance.

Thanks all for the quick response.
Steps to be followed:
1) incorporatomg AUTHORITY-CHECK statements for K_KOSTL and F_BKPF_BUK objects in the program.
2) adding the objects as check yes in SU24 for the Z transaction.
and restricting in the role.
The program name is "GP3O4ZGOOF3HA68QMGHF8S7I9ER250".
Please let me know if any more steps need to be followed.
Based on this i have to send a estimate to my client.
Thanks,
Sanketh.

I made an in app purchase, it said purchase successful but it never showed up. I was charged for it too and so far I've reported a problem about 3 times and I waited a full day and still no response.Happened before but i got an email that time.HELP

Made an in app purchase and it never showed up. Reported it and waited a full day and no response. What do i do from here?

How long ago did you last contact Support, and how ? If it's been longer than 48 hours, and only tried one method of contact, then you could try the other :
- the 'report a problem' page : http://reportaproblem.apple.com
- contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

Logic to select Report name based on User's input.

Hi Guru's
Good Morning!
I have a requirement to create a XMLPUBLISHER Report Whihc is Called as ITEM COUNT SUMMARY + ITEM COUNT DETAIL REPORT Following below
are my ParameterS
0.REPORT NAME
1.ORG
2.ORG COUNTRY
3.ITEM SELECTION
4.ORDER TYPE
5.STATUS
6.RECEIPT DATE FROM
7.RECEIPT DATE TO
8.TRANSIT DAYS
REPORT NAME: PARAMETER WILL LET THE USER to select the requrired Reports to be run.
ORG: is the Names of the SHIP FROM ORG
ORG COUNTRY: is a Dependent Parameter based on the ORG (i.e When a SHIP FROM ORG is Selected the ORG CHOICE Should have the CHoices for the selected ORG and when Nothing Selected from that ORG it should run for every ORG COUNTRY in that SHIP FROM ORG Currently we have two ORG COUNTRY PER SHIP FROM ORG say(USA, CANADA)
ITEM SELECTION: We need to Run this Report based on Item Selection ( The Logic should handle a total item selection whihc are comma seperated for upto 29
items)
ORDER TYPE : Types of Order Again this can be a List of Comma Seperated Values for order Types
STATUS: STatus should be Comma Seperated (ENTERED,WAVED,NOTWAVED,SHIPPED)
TRANSIT DAYS: Transit Days
RECEIPT DATE FROM: This is the Starting DATe range for the REport to be run
RECEIPT DATE TO: This is the END DATe range for the REport to be run.
The ITEM COUNT SUMMARY Report should allow the users to run the report 3 ways
1.ITEM COUNT RUN BY ORDER TYPE ( for all the STATUS)
2.ITME COUNT RUN BY STATUS ( FOR all the ORDER TYPES)
3.ITEM COUNT RUN BY TRANSIT DAYS
And My approach is I have three Queries Created for the above and in the DATA DEFINITION File
I have them Listed my DATA DEFININTION ( Sorry as my Query's GO More than 70+ LINES for Each Query I thought I will just paste the Order How i have arranged my queries in the Tempalte)
<?xml version = '1.0' encoding = 'UTF-8'?>
<dataTemplate name="TPC_ITEM_COUNT_SUMMARY" description = "TPC_ITEM_COUNT_SUMMARY" version="1.0">
<properties>
     <property name="xml_tag_case" value="upper"/>
</properties>

     <parameters>
     <parameter name="report_name" dataType="varchar2"/>
     <parameter name="item_selection"          dataType="varchar2"/>
     <parameter name="order_type"               dataType="varchar2"/>
     <parameter name="pstatus"               dataType="varchar2"/>
     <parameter name="org_name"               dataType="varchar2"/>
     <parameter name="org_choice"               dataType="number"/>
     <parameter name="first_receipt_date"     dataType="date"/>
     <parameter name="last_receipt_date"     dataType="date"/>
     <parameter name="from_date"               dataType="date"/>
     <parameter name="to_date"                    dataType="date"/>
     <parameter name="transit_days"          dataType="number"/>
     </parameters>
<dataQuery>
<sqlStatement name= "HDR">
<![CDATA[
SELECT UPPER('The ABC Corporation, Ltd.')     AS "COMPANY"
               ,'Item Count Summary - '||INITCAP(:report_selection)||' for Company '||:org_name AS "REPORT"
               ,'Order Types - '||UPPER(:order_type) AS "ORDER_TYPE"
               , SYSDATE AS "RUN_DATE"
     ,'Receipt Date'||' '||TO_CHAR(NVL(TO_DATE(:first_receipt_date,'DD-MON-YYYY'),SYSDATE),'YYYYMMDD')                     ||' '||'thru'||' '||TO_CHAR(NVL(TO_DATE(:last_receipt_date,'DD-MON-YYYY'),SYSDATE),'YYYYMMDD') AS "RANGE"
FROM DUAL;
]]>
</sqlStatement>
<sqlStatement name= "BY_STATUS">
     <![CDATA[
Query for ITEM COUNT SUMMARY by STATUS
]]>
</sqlStatement>
<sqlStatement name= "BY_ORDERTYPE">
     <![CDATA[
Query for ITEM COUNT SUMMARY by ORDERTYPE
]]>
</sqlStatement>
<sqlStatement name= "BY_TRANSITDAYS">
     <![CDATA[
Query for ITEM COUNT SUMMARY by TRANSITDAYS
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_HDR" source="HDR">
          <element name="COMPANY" value="COMPANY" />
          <element name="REPORT" value="REPORT" />
          <element name="ORDER_TYPE" value="ORDER_TYPE" />
          <element name="RANGE" value="RANGE" />
</group>
<group name="G_BY_STATUS" source="BY_STATUS">
          <element name="RCPT_DT" value="RCPT_DT"/>
<element name="ITEM"     value="ITEM" />
          <element name="ITEM_DESCRIPTION" value="ITEM_DESCRIPTION" />
          <element name="ENTERED"     value="ENTERED" />
<element name="WAVED"     value="WAVED" />
<element name="NOTWAVED"     value="NOTWAVED" />
<element name="SHIPPED"     value="SHIPPED"/>
</group>
          <group name="G_BY_ORDERTYPE" source="BY_ORDERTYPE">
<element name="ITEM"          value="ITEM" />
          <element name="ITEM_DESCRIPTION" value="ITEM_DESCRIPTION" />
          <element name="RCPT_DT"     value="RCPT_DT"/>
          <element name="ORDER_TYPE"     value="ORDER_TYPE" />
<element name="QUANTITY" value="QUANTITY" />
          </group>
</dataStructure>
</dataTemplate>
Now My Problem is How Do i Get a Logic to Let the Report Name Selection To be REferenced in the Data Definition file..
I would like to request you to Please help me out in arriving at a Solution for Implementing the Logic
When the USer selects ITEM COUNT SUMMARY BY ORDER TYPE I want "BY_ORDERTYPE" to be Executed and so on..
Is there a Way That I can Write in my Data definition file as
DECODE(:REPORT_NAME ,'ITEM COUNT SUMMARY BY ORDERTYPE', Run query for BY_ORDERTYPE,
,'ITEM COUNT SUMMARY BY STATUS', Run query for BY_STATUS,
,'ITEM COUNT SUMMARY BY TRANSIT DAYS', Run query for BY_TRANSITDAYS,run query for DETAIL REPORT);
Also My Item Description Contains Special Characters like Registered Symbol, Copyright Symbol How would I force my XML Parser to Still consider them as TEXT's
May I Directly Specify <?xdofx:DECODE :REPORT_NAME = 'ITEM COUNT SUMMARY BY ORDERTYPE' THEN BY_ORDERTYPE ?> in the DATA DEFINITION file , I think this is only allowed in RTF please Help,
Thanks
vasanthanand

Thanks for the Reply sir,
When you say Write the Code, you are referring to the Package is that correct,unfortunately I am not implementing this via PL/SQL Package.
you mentioned that I can Implement the Logic in the Data definition file( which is a XML file), how and Where I have print use that IF construct (or) Can you Please Print the Code snippet in the Model XML template that i have pasted in my Post.
May i know what is this
ln_req_id := fnd_request.submit_request -- for XML1 For...
Sorry about my ignorance...

Report requirements based on cal day and calmonth

Similar Messages

Maybe you are looking for