Report showing planned vs. real production times

Hi,
I am using APO 7.03 and try to find out if there is a possibility of comparing the planned vs. real production times. we need to compare the planned times maintained in operations of the routings with the real production times coming from the confirmations of production orders. Is there any report, etc. in APO PPDS or in SAP PP where we could see that?
thanks in advance for all input!
br,
Wojciech

Hi,
As far as i know, there are not exact report that will fulfill your requirement. However i would suggest you some Standard SAP reports where you can get data.
1) MCPH - Report for  work centre Analysis
2) MCRW - Report for resourse analysis
3) COID - Which will give you,
a) Capacity to be confirmed
b) Actual Confirmation.
IN above mentioned report you have to choose key filed to be selected.
Further more,
For planned data,
1) go to table - AFVV, Input Routing No.
Output - VGW03, VGW04 i.e. your planned time for operation
For actual Data,
1) go to table AFRU input Routing ni. or Process Order
Output: Actual phase confirmations.
Revert if you found info useful.

Similar Messages

  • Report showing the salary at the time of joining .

    Hi,
    I am asked to prepare a report which shows the employees hired between 1.4.2007 to 31.3.2008 and their salary at the time of joining.
    I am doing it through Adhoc Query. But the report is showing the current annual salary of the employees.
    Please guide me how to prepare the report so that it shows the salary at the time of joining.

    u can try with PC00_M99_CWTR not sure

  • Report showing purchasing group and product responsibility

    Hi,
    Is there a report that will show all purchasing groups and which product categories that they are responsible for?
    Or
    Is there a report that will give me each product category and which purchasing groups that are responsible for that product category?
    Sincerely
    Anders

    not clear as to what you want...
    PP forum would be best for it... Or if you specify your req more clearly as to what input you give and what output you want, may be we can help
    Ajay

  • Report unavailable 4 multiProvider with 2 Plan allowed real-time icube?

    Dear all,
      It seems that the multiprovide with 2 plan allowed real-time infocube can not generates report correctly. Is that right? Or I'm missing defining some configurations? Any sugguestions are appreciated.
    best regards,
    Gerald

    Hi,
    It will generate report properly. U might missed something.
    Thanks
    Debasish

  • How to create z-report ( actual , planned , variance -production qty)

    Hi dear experts,
    My client need a report where we can see production order qty, actual production qty, dependent matl planned qty and dependent matl actual consummed qty, and difference between actual and planned quantities in one single screen?
    For this , sap have any std reports or else we have to create any z-report?
    In case of z-report plz explain me how to create it.
    please guide us.
    Regards,
    Imran

    Hi,
    you can check below standard PP reports transaction code:
    COOIS - Production Order Info system
    MCPM Production order anal.: Quantities
    MCPD Production order analysis: Dates
    MCPU Production Order Analysis: Lead Time
    MCP0 Shop Floor Information System
    MCP1 SFIS: Operation Analysis Selection
    MCP3 SFIS: Material Analysis Selection
    If you want to get Z development report, first you can go throgh your business requirement and what will client expect in your Z report, then you can check the production order header & component tables & its relevant fields.
    You can prepare for functional specification for Z report development and will send it to ABAPer's.
    Let me know any further clarifications.
    Regards,
    Mohan.R

  • Report for planned or prodcution order for production in Alternate plants

    Hai gurus,
    I have two plants - X and Y
    Plant x have finished goods A and B to be produced  and procured from plant - Y
    plant Y have finished goods C and D to be produced  and procured from plant - X
    The production in alternate plant concept is used in plant X  for Product A and B
    The production in alternate plant concept is used in Plant Y for Product C and D.
    Now my requirement is how to get the report for the Purchase order raised by the
    plant X for the Finished product A and B , also how to know the planned order
    and production order with reference to purchase order for Finished product A and B
    under plant - Y
    and VIce versa for the Finished product C and B in plant X and Y
    Waiting for the positive reply.
    Regards,
    Sekar chand

    There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
    The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
    You can view the pegging dynamically, for example in MD04.
    Edited by: Mario Adler on Oct 27, 2011 12:13 PM

  • Report showing labor and machine time based on standard cost estimate

    Hi Friends,
    Ours is an Manufacturing organisation & we have a requirement of report showing machine and labor time as per part wise & cost center wise. We need to run the report before saving standard cost estimate [CK11N]  in order to see the part wise or cost center wise discrepancies in machine and labor time. If any one could help in creating such report in SAP  it will be of great help.
    Regards,
    Varsha

    Hi Varsha,
    you can jump from CK11N to a own report by
    Menu Function 'Costs -> User Exit Display'
         Cost Report 1 / 2 / 3
    The own report can be implemented via (SMOD) enhancement SAPLXCKA
    The report will be handed over the currently displayed in the program interface.
    some example coding is provided for the exit.
    compare SAP Note No. 71146
    best regards,   Udo

  • Material report showing lead time & min order quantity?

    Hi,
    Is there a report which I can download which shows by material, the lead time and minimum order quantity?
    Thanks
    Keeley

    We don't have access to any query writing so if it's not possible to get both fields on one table, can I run two reports?
    OR...
    is it possible to change the ME1M report to display/export horizontally in a table type format rather than wrapped?
    Edited by: Keeley B on Sep 23, 2009 7:58 AM

  • Agent detail report shows calls outside the time range

    Hi all,
    I have an UCCX 7.0 SR5 call center. My problem is that the agent detail report is showing calls outside the defined time range on the historical reporting client.
    Those calls start slightly after the end time difined in the HR client.
    Is there any explanation for this behaviour?
    Best Regards,

    Hello Hatem,
    I think that might be expected. In the Agent Detail Report the call start time is the time the call rang at the agent's extension and not necessarily the actual time the call started. So the report will show the call was really received within the time range but it rang the agent slightly after that time.
    HTH
    Pablo

  • CUIC Reports Show Incorrect Time

    We have a single node UCCX 9.0.2 environment that we recently switched over from HRC to CUIC (co-resident) for reporting.
    While running some test reports I noticed that the times listed in the reports are off by several hours (see screenshots).  I have checked the time zone setting everywhere I can think of, and it's also happening to anyone that runs the report rather than just one person.  I have the time zone set to America/Chicago for each user (although I've also tried CST and US/Central).  The UCCX server is set to Central Standard Time and it gets it's time from an NTP server.  Checking NTP status on the server shows that the server's time is dead on.
    I feel like this is the type of thing that an incorrect setting would cause, but I can't think of any other way that this could be set wrong.
    I did find a bug (https://tools.cisco.com/bugsearch/bug/CSCur41928) relating to time zone issues that is known to affect our version, but from what I can tell it doesn't apply to us.  We're already set to the time zone that the workaround would have us set.  I was going to apply the workaround anyway just to see if it made a difference, but I'll have to re-host our license if I do that.

    Hi,
    The user should not have any timezone set. It should be set as blank. Also under the Datasources, check the UCCX Datasource and Edit. Ensure that the timezone is GMT.
    Basically CUIC should not have any timezone set. It will pull the information from the CCX timezone which is CST in your case. In the event of any timezone settings on CUIC, you will have issues.
    The options are for standalone CUIC so leave it at default.
    Regards,
    Arundeep

  • Planned vs actual production report

    Hi,
    Which report is used for planned vs actual production information.
    Rajesh

    Hi
    COOIS will give all the standard order relating to production order. You can get the data in required way, by giving propoer input to the system through the front end screen
    Regards
    J.Saravan

  • Conversion of planned orders to production orders

    Hi,
    we are doing mass conversion of planned orders to production orders and performing capacity availability check, how system will give log information based on these two things,
    when i perform availability check at time of order creation and will not allow to create if anything is missing (i selected user decides option in configuration), does it show any error log report and where can i see.
    When i perform availability check at time of release, if anything missing it will not allow to release and give a choice for a user to release in normal production order creation process, how it will work in mass conversion. is there any standard report to look at missing planned orders so that users will come to know and then decides whether to convert to production order or not.
    thanks in advance.

    Dear ,
    In SM38-Enter PPBICO40 -Execute -Here you need to Mark the Output log option with Erros only or Error Folder for each MRP controller  .Frist you do it in test mode and then remove test mode , mark the Output log option as per requured field and check the result .
    refer this useful thread : Program PPBICO40 for conversion of planned orders to production order
    Regards
    JH

  • Open planned orders and production orders

    Hi friends,
    I have one issue with my client.
    Client has 1 lac materials in sap .Now he wants extract all materials open planned orders and open production orders with quantity and dates.
    Please tell me the process how i can extract the data from sap for above requirement.
    Thanks,
    Manoj

    Hi Manoj,
    For open planned order and production order select the respective box.
    But one suggestion. Try to convince client that this report will take a lot of time as you have mentioned 1 lac materials are there.
    You can exclude system status and get it with below screen as mentioned already.
    But my suggestion is to run the report at night when the system load is very less. Please create a background job one for planned order and another for production order. Then run it in midnight as per the customer requirement in background. You can automate the process by sending automatic mail to customer. Please refer the below link to trigger mail.
    Mail Trigger with TEXT file via JOB run
    Regards,
    Krishnendu.

  • How to restrict planned order by production order type

    we develop one Z-report which include planned order as well as production .on restriting the output by order type given on selection screen of report, production order can be restricted but it show all the planned order which is to be converted to selected order type production order or not.
    is there any suggesion to display that planned order only to the output of report which will convert to the production order of the type given on selection screen of report.
    i know that we define prod scehu profile in work sched view of material and in production schedu.  profile we define the order type picked while conversion of planned order to production order.but i am not able to connect them by using table...please guide

    Hi,
    Could you explain your problem correctly.
    regards
    mkrk

  • VAMT 3.0 Duplicate Client Machine ID Report showing excessive number of computers

    We are running a KMS on a 2008 R2 VM with plenty of CPU, RAM and storage.  I recently configured and installed the Volume Activation Management Tool 3.0.  Everything seems to be working well except that reviewing the Volume License
    Reports, specifically the Duplicate Client Machine ID Report, I noticed an excessive number (about 4 times the number of actual managed computers) are listed in this report node. Even assuming that computer images were not being sysprep'd this
    seems really odd.  The License Overview shows 1,813 licensed and 1,678 unknown (possibly off or disconnected devices) and our duplicate CMID report shows about 8,300 plus.  What are the possible causes why this number is so high and how do I troubleshoot
    and remediate inaccuracies? 

    Duplicate CMID can come if you didnt used /generalize option when sysprep'ing. (http://blogs.technet.com/b/askcore/archive/2009/10/16/kms-host-client-count-not-increasing-due-to-duplicate-cmid-s.aspx)
    Please check your KMS's log, to be sure if true or not. If duplicate, it will be logged by your KMS's host.
    In virtual, like XenDesktop or View with a golden image it can easilly happen, as the CMID is kept by the server for the virtual's machine (aka the PVS for XenDesktop)
    Regards, Philippe
    Don't forget to mark as answer or vote as
    helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!
    Hi Yagmoth555, thanks for the reply.  I know this is not the case for our environment as it's telling me that physical systems that were installed with the ISO have duplicate ID's.  Also, the previous version of VAMT that we were running didn't show
    1,560 systems as having the same ID.  I have already deleted every "product" from the database and rescanned our environment, but I get the same result.

Maybe you are looking for