Report wizard cannot add tables having "hyphen" in their names

I am trying to design a *.rpt file. I am using report wizard and connecting to a Progress/OpenEdge database.
Progress allows the hyphen "-" in table names. We have tables which were created about 15 years ago and all the tables have hyphens in their names such as "sales-subtype-table" etc etc.
The reprot wizard can not add such table to the report.
However when I remove the hyphen from table names such as "sales-subtype-table" to "salesSyubtypeTable" everything works fine.
Any suggestions..
thanks
arain

I'm not familliar with Progress/OpenEdge, but can you create views in the database that are basically "Select * from ....".? The view name would be the table name without the hyphens. You would then use the views in your reports instead of the tables.
-Dell

Similar Messages

How can i make it so that on messages i can see who is online wihtout having to search their name?

how can i make it so that on messages i can see who is online without having to search their name? When i had ichat i didnt have to search their name... i culd see who was online autimatically.

Firefox, the web browser, doesn't make any decisions about what mail should be considered spam or what senders should be blocked. What email software or webmail site are you using that is rejecting the messages?
If it's a common site like Yahoo! mail, Gmail, Windows Live Hotmail/Outlook.com, then perhaps a volunteer familiar with their specific settings can help.
If it's Thunderbird, the support site is over here: [https://support.mozillamessaging.com/].
If your security/privacy software filters your mail, you will want to check its settings as well.

Create a report from scratch, add Table and Datasource Problem

Hi,
I'm using the latest Crystal Reports Runtime supplied for eclipse.
I want to create a report from scratch, add a Table and then add a ArrayList of Pojos as the Datasource.
But unfortunately depending on the ConnectionInfo I supply to the Table I get different errors.
I looked through the samples and see that I have to supply properties
like
"Database DLL", "crdb_javabeans.dll" and ConnectionInfo.setUserName("");
     ConnectionInfo.setPassword(null)
I looked through the forums and find different set of properties.
Actually because I am just working with Pojos I would have thougth that something like the following
would be sufficient:
ReportClientDocument doc = new ReportClientDocument();
            doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
            doc.newDocument();
Table table = new Table();
table.setAlias("reportTable");
table.setName("reportTable");
doc.getDatabaseController().addTable(oTable, null);
doc.getDatabaseController().setDataSource(myCoolection, myClass, "reportTable", "reportTable");
So could someone tell me the right/minimum Set of Properties to make a Table get connected to Pojos?
Edited by: jack mann on Aug 31, 2010 3:25 PM

With XI Release 2, you can come quite close to creating from scratch:
http://technicalsupport.businessobjects.com/KanisaSupportSite
/search.do?cmd=displayKC&docType=kc&externalId=5074668
You need Service Pack 2:
http://support.businessobjects.com/downloads
/service_packs/crystal_reports_en.asp
Sincerely,
Ted Ueda

Crystal report : can't add table in the samples provided by SAP

Hello,
I tried to add tables in the generic samples provided by SAP. I used the database expert and just added a new table but when I save the report in SAP and want to run it it is blank.
Is there another way to add a table ?
BR

Already tried all those tricks!
My question is concerning the standard layouts provided by SAP (downloaded from marketplace). The idea behind those reports is that you can use them as Templates.
The tables are not hardcoded with the table.field name but with a specific syntax that allows you to use those templates in any type of document (ex : you can use the template of sales order for delivery and invoices). The problem is that if you add a new table the report doesn't work!
Thank you for the response anyway.
Best Regards,
Arnaud

Report generation with two tables having no join

Hi,
I would like to know if i can generate a report to view data from purchase and sales tables at one time even if they are not directly linked.
Regards,
Bhavna

hi jain,
You can use Union All to combine sql queries of sales and
purchase tables.
Jeyakanthan.

You cannot add a job with a duplicate name, as a web service already exists with name ... please rename the job and try again

We are attempting to add a web service job and getting a duplicate name issue. I believe we have a caching issue where this job name may already exist but we are unable to see it on the web services status page.
Is there a data services repository database table where I can find these web services jobs listed and clean it up from the backend?

There is no option there that shows me if it is being used as a web service. Here is my issue with some screen shots.
I look at my current web service enabled jobs looking for B_JOB_CP_MDR_to_GW_EMP but it is not in the list.
I attempt to add it from repository DWXDS9
It throws an error and tells me there is already a web service with this name...
Now there has got to be an internal data services table somewhere that has this job listed as a web service. I am just trying to figure out what that table may be to determine if we can do some type of cleanup on it so we can add this job again as a web service (so it is visible to us).

Cannot add user to workspace

Dear,
I cannot add the below user
Email First Name Last Name uid Status
[email protected] Devanath Desikan ddesikan Verified
to the workspace: https://beehiveonline.oracle.com/teamcollab/overview/PMI_Benelux_Day_Workspace
The above user is the only one who's UID is not equal to the email address.
Your help will be appreciated.
Kind regards
Francis

Phil,
thanks for this, but the user was not able to log on.
Created a new user ID using another email from him.
this time it worked.
It seems that modifying the login_id to his email address does not work. I had similar problems with my private logon id in the past. I also had to create a new Oracle ID using another email address.
But this can be closed since we used a workaround.
Kind regards
Francis

Need to add tables in the pricing report(V/LB)

Hi
I want to add some table in the existing pricing report.But I am unable to do so.
My requirement was to add some new selection field in the Pricing report which is possible by adding the table in the existing pricing report.
But I found If I go to EDIT>Tables.there is one option is called "add table" which is appearing grey.
Can you found it the way to add the tables in the Pricing report.

Hi Sumit,
You cannot add anything to existing report - you need to create new one and there you will be able to choose more tables than you use now.
Regards,
Marcin

2 problems: 1st unopened messages, 2nd cannot add personal email in setup wizard

Hi guys, I'm having a problem with my device. It seems like I cannot add a personal email adress in my email setup (from the setup wizard) When I enter this setup wizard > email setup the following appears: email setup select an email setup option [ ] I want to use a work email account with a Blackberry Enterprise Server AND THATS THE ONLY OPTION I CAN PICK! (a friend of mine with the same device could add a personal email) from there I can only choose { close } or { next } what is happening, can someone explain what I can do to add my personal adress? ------------------ Another thing I find quite strange is the fact that on my desktop the icon "unopened message count" appears. When I open the BB-menu, there should be a little star in the message-icon right? Well it isn't there! (the litte white-on-red star) So this icon tells me that I have unopened messages, but I can't find them anywhere.. guys please help!!!

Hi and Welcome to the Forums!
Your first problem is carrier related -- you must have the proper data plan from your carrier (at whatever costs they charge) to enable enhanced BB functions like email. A generic data plan is not usually sufficient -- some call the required plan The BlackBerry Data Plan. But call your carrier and ask them what you need from them in order to have access to their BlackBerry Internet Services (which include personal email).
Your second problem I am not understanding. What "BB-menu" are you accessing? Where exactly is the star you are seeing? Where exactly is the star you are expecting to see? More and clearer details, please.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Add table to pricing report

Hi all,
Here is an issue how to add a table to an existing pricing report.
Is there any function to re-generation or allow to add a table to pricing report? It seems that only to delete all table and re-create a new one to add this table to the pricing report.
Thanks in advance for your help.
Steven

If you have generated a pricing report, then you cannot add some more fields to it. Please delete the pricing report and then recreate a new one with all the essential fields you need.
Hope this helps you
Pls reward if it helps.

Cannot link tables in Crystal Reports 2013

Hi Forum,
We upgraded to CR 2013 from old 8.5 and i cannot link tables anymore.
I disable Smart Linking and work ok now but i really don't want to keep it disable because some users are used to smart linking.
Is there a seeting or something in the registry that i can add or change to make the smart linking work?...
the error that i was getting is attached:
Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: crw32.exe P2: 14.1.5.1501 P3: 54616206 P4: StackHash_ba3d P5: 6.1.7601.18247 P6: 521ea91c P7: c0000374 P8: 000c3873 P9: P10: Attached files: These files may be available here: C:\Users\TGHAZAL\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_crw32.exe_9cb4f582e912c9a7d84acec8103b1fec3cc260e_121d946b Analysis symbol: Rechecking for solution: 0 Report Id: 9ca8bfab-e867-11e4-8ffc-904ce5e0a392 Report Status: 0
Regards,
Manuel Roman

Hi,
Rearrange links and then try.
Thanks.

Change font of a cell in add Table to Report

Hello,
Is there a way to change the font of an individual cell in the add table to report VI?
Also is it posible to change the column width of a selected column?
Thanks
Dan

Hi Dan,
i think to get what you want you can only use a html report. There you have to create your own "HTML Report Table Row.vi" with the font tags for each cell.
Mike

Cannot add column to flexible table when ddl autocommit is off using Procedure

Hello All,
Through procedure I am trying to insert data into the target(EX_92) table(with schema flexibility)
Source table data
ID
PRODUCT_CODE
PRODUCT_NAME
PRICE
COLOR
TYPE
1
1
rugg
101.22
2
1
rugg
101.22
3
2
book
200.32
BLUE
Y
Target table QUERY
drop table EX_P2;
CREATE COLUMN TABLE EX_P2(
ID INTEGER PRIMARY KEY,
PRODUCT_CODE VARCHAR(3),
PRODUCT_NAME NVARCHAR(20),
PRICE DECIMAL(5,2)
) WITH SCHEMA FLEXIBILITY;
Procedure to insert above records with additional columns into the target table(EX_P2)
Procedure
drop procedure "DS_O1"."PROC";
create procedure "DS_O1"."PROC"(IN max_value INTEGER, IN schema_name varchar(40), IN table_name varchar(40), IN column_list varchar(400))
LANGUAGE SQLSCRIPT AS
BEGIN
DECLARE maxid integer :=0;
DECLARE INSERT_STR VARCHAR(1000) :='';
select max(ID) into maxid from "DS_O1"."EX_P2";
select :maxid from dummy;
INSERT_STR :='insert into "' || 'DS_O1' ||'"."EX_P2" ('||:column_list||') (select ' ||:column_list||'
FROM "'||:schema_name||'"."'||:table_name||'"' || ' where ID >' || :max_value || ')';
EXECUTE immediate(:INSERT_STR);
END;
Now while executing above procedure
CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE');
I am getting the following error
Could not execute 'CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE')' in 23 ms 564 µs .
SAP DBTech JDBC: [7]: feature not supported: [7] "DS_O1"."PROC": line 18 col 1 (at pos 779): [7] (range 3): feature not supported: cannot add column to flexible table when ddl autocommit is off

Hi Rajnish,
I had the same issue. For what it’s worth I was able to do a workaround basically creating all the columns when I create the table. The following code works for me to create the table which is just a matrix with one Integer column as the key and the rest as type Double.
It is not ideal in all scenarios because the table columns cannot be added dynamically via a procedure at a later point. This table has 27K columns now
Of course one of the advantages of a flex table would be programmatically adding columns dynamically. This works, but maybe there is still a way to add columns dynamically from a procedure, and someone else can advise.
Apparently dynamically adding columns via procedures may have some "minor" limitations due to the need to compile the procedure with knowledge of the flex table DDL. But again, hopefully someone knows another solution.
Best regards,
Mark
DROP PROCEDURE CREATE_MATRIX;
CREATE PROCEDURE CREATE_MATRIX(
    LANGUAGE SQLSCRIPT
    SQL SECURITY INVOKER
    AS
/*********BEGIN PROCEDURE SCRIPT ************/
BEGIN
    -- cursor over messages
    declare cursor matrix_cursor for
        select distinct TERM
        from TERMS
        order by term;
       declare cnt INTEGER := 0;
       declare temptxt NVARCHAR(500000) := 'CREATE COLUMN TABLE DOC_MATRIX ( CONTENT_ID INTEGER ';
    for cur_matrix as matrix_cursor do
      cnt:=:cnt + 1;
           select temptxt || ', C' || cnt || ' DOUBLE' into temptxt from dummy;
    end for;
      temptxt:=temptxt || ' ) WITH SCHEMA FLEXIBILITY';
       EXEC :temptxt;
       select :temptxt from dummy;
END;
DROP TABLE DOC_MATRIX;
CALL CREATE_MATRIX();

Interactive alv report......with one table having more than 2 foreign key

*& Report ZRAHUL_ALV_SFLIGHT2
REPORT zrahul_alv_sflight2 NO STANDARD PAGE HEADING.
TYPE-POOLS slis.
DATA: fcat TYPE slis_fieldcat_alv,
      it_fcat TYPE slis_t_fieldcat_alv,
      fcat1 TYPE slis_fieldcat_alv,
      it_fcat1 TYPE slis_t_fieldcat_alv,
      fcat2 TYPE slis_fieldcat_alv,
      it_fcat2 TYPE slis_t_fieldcat_alv,
      lout TYPE slis_layout_alv,
      head TYPE slis_listheader,
      it_head TYPE slis_t_listheader.
TABLES: SFLIGHT, SCURX, SAPLANE.
DATA: BEGIN OF it_sflight OCCURS 0,
        carrid TYPE sflight-carrid,      "PK
        connid TYPE sflight-connid,
        fldate TYPE sflight-fldate,
        currency TYPE sflight-currency,        "FK 1
        planetype TYPE sflight-planetype,      "FK 2
      END OF it_sflight.
DATA: BEGIN OF it_scurx OCCURS 0,
        currkey TYPE scurx-currkey,        "PK 1
        currdec TYPE scurx-currdec,
      END OF it_scurx.
DATA: BEGIN OF it_saplane OCCURS 0,
        planetype TYPE saplane-planetype,      "PK 2
        seatsmax TYPE saplane-seatsmax,
        tankcap TYPE saplane-tankcap,
        weight TYPE saplane-weight,
      END OF it_saplane.
SELECTION-SCREEN: BEGIN OF BLOCK blk WITH FRAME TITLE t.
SELECT-OPTIONS: id FOR it_sflight-carrid,
                id2 FOR it_sflight-connid.
SELECTION-SCREEN END OF BLOCK blk.
INITIALIZATION.
t = 'enter required criterias'.
lout-zebra = 'X'.
START-OF-SELECTION.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE it_sflight
            WHERE carrid IN id AND connid IN id2.
END-OF-SELECTION.
****FCAT F0R IT_SFLIGHT
fcat-col_pos = 1.
fcat-tabname = 'IT_SFLIGHT'.
fcat-fieldname = 'CARRID'.
fcat-outputlen = 10.
fcat-seltext_m = 'PLANE ID'.
APPEND fcat TO it_fcat.
CLEAR fcat.
fcat-col_pos = 2.
fcat-tabname = 'IT_SFLIGHT'.
fcat-fieldname = 'CONNID'.
fcat-outputlen = 10.
fcat-seltext_m = 'CONN ID'.
APPEND fcat TO it_fcat.
CLEAR fcat.
fcat-col_pos = 3.
fcat-tabname = 'IT_SFLIGHT'.
fcat-fieldname = 'FLDATE'.
fcat-outputlen = 10.
fcat-seltext_m = 'FLDATE'.
APPEND fcat TO it_fcat.
CLEAR fcat.
fcat-col_pos = 4.
fcat-tabname = 'IT_SFLIGHT'.
fcat-fieldname = 'CURRENCY'.
fcat-outputlen = 10.
fcat-seltext_m = 'CURRENCY'.
APPEND fcat TO it_fcat.
CLEAR fcat.
fcat-col_pos = 5.
fcat-tabname = 'IT_SFLIGHT'.
fcat-fieldname = ';PLANETYPE'.
fcat-outputlen = 10.
fcat-seltext_m = 'PLANETYPE'.
APPEND fcat TO it_fcat.
CLEAR fcat.
*****GRID DISPLAY
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
    i_callback_program                = 'ZRAHUL_ALV_SFLIGHT2'
    I_CALLBACK_PF_STATUS_SET          = ' '
     i_callback_user_command           = 'CLICK'
     i_callback_top_of_page            = 'HEADER'
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    I_CALLBACK_HTML_END_OF_LIST       = ' '
    I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = ' '
     i_grid_title                      = 'GRID 1'
    I_GRID_SETTINGS                   =
     is_layout                         = lout
     it_fieldcat                       = it_fcat
    IT_EXCLUDING                      =
    IT_SPECIAL_GROUPS                 =
    IT_SORT                           =
    IT_FILTER                         =
    IS_SEL_HIDE                       =
    I_DEFAULT                         = 'X'
    I_SAVE                            = ' '
    IS_VARIANT                        =
    IT_EVENTS                         =
    IT_EVENT_EXIT                     =
    IS_PRINT                          =
    IS_REPREP_ID                      =
    I_SCREEN_START_COLUMN             = 0
    I_SCREEN_START_LINE               = 0
    I_SCREEN_END_COLUMN               = 0
    I_SCREEN_END_LINE                 = 0
    I_HTML_HEIGHT_TOP                 = 0
    I_HTML_HEIGHT_END                 = 0
    IT_ALV_GRAPHICS                   =
    IT_HYPERLINK                      =
    IT_ADD_FIELDCAT                   =
    IT_EXCEPT_QINFO                   =
    IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
    E_EXIT_CAUSED_BY_CALLER           =
    ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_sflight
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form header
      text
FORM header.
CLEAR it_head.
head-typ = 'H'.
head-info = 'KINGFISHER'.
APPEND head TO it_head.
head-typ = 'S'.
head-key = 'KEY'.
head-info = 'AIRLINES'.
APPEND head TO it_head.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_head
     i_logo                   = 'KING_LOGO'
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
ENDFORM.                    "header
*&      Form CLICK
      text
     -->OK         text
     -->SEL        text
FORM click USING ok TYPE sy-ucomm
                 sel TYPE slis_selfield.
CLEAR it_fcat.
CASE ok.
    WHEN '&IC1'.
********SAPLANE RELATION
      READ TABLE it_sflight INDEX sel-tabindex.
      SELECT * FROM saplane INTO CORRESPONDING FIELDS OF TABLE it_saplane WHERE planetype = it_sflight-planetype.
      fcat-col_pos = 1.
      fcat-tabname = 'IT_SAPLANE'.
      fcat-fieldname = 'PLANETYPE'.
      fcat-outputlen = 10.
      fcat-seltext_m = 'TYPE OF PLANE'.
      APPEND fcat TO it_FCAT.
      CLEAR fcat.
      fcat-col_pos = 2.
      fcat-tabname = 'IT_SAPLANE'.
      fcat-fieldname = 'SEATSMAX'.
      fcat-outputlen = 10.
      fcat-seltext_m = 'MAX SEATS'.
      APPEND fcat TO it_FCAT.
      CLEAR fcat.
      fcat-col_pos = 3.
      fcat-tabname = 'IT_SAPLANE'.
      fcat-fieldname = 'TANKCAP'.
      fcat-outputlen = 10.
      fcat-seltext_m = 'FUEL TANK CAPACITY'.
      APPEND fcat TO it_FCAT.
      CLEAR fcat.
      fcat-col_pos = 4.
      fcat-tabname = 'IT_SAPLANE'.
      fcat-fieldname = 'WEIGHT'.
      fcat-outputlen = 10.
      fcat-seltext_m = 'WEIGHT F PLANE'.
      APPEND fcat TO it_FCAT.
      CLEAR fcat.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
         i_callback_program                = 'ZRAHUL_ALV_SFLIGHT2'
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
         i_callback_top_of_page            = 'HEADER'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
         i_grid_title                      = 'GRID 2'
I_GRID_SETTINGS                   =
         is_layout                         = LOUT
         it_fieldcat                       = IT_FCAT
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
        tables
          t_outtab                          = IT_SAPLANE
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*******SCURX RELATION
                CLEAR: IT_FCAT2,IT_FCAT.
                READ TABLE IT_SFLIGHT INDEX SEL-TABINDEX.
                  SELECT * FROM SCURX INTO CORRESPONDING FIELDS OF TABLE IT_SCURX WHERE CURRKEY = IT_SFLIGHT-CURRENCY.
                  FCAT2-COL_POS = 1.
                  FCAT2-TABNAME = 'IT_SCURX'.
                  FCAT2-FIELDNAME = 'CURRKEY'.
                  FCAT2-OUTPUTLEN = 15.
                  FCAT2-SELTEXT_M = 'CURRENCY'.
                  APPEND FCAT2 TO IT_FCAT2.
                  CLEAR FCAT2.
                  FCAT2-COL_POS = 2.
                  FCAT2-TABNAME = 'IT_SCURX'.
                  FCAT2-FIELDNAME = 'CURRDEC'.
                  FCAT2-OUTPUTLEN = 15.
                  FCAT2-SELTEXT_M = 'CURRENCY DEC'.
                  APPEND FCAT2 TO IT_FCAT2.
                  CLEAR FCAT2.
                  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
                   EXPORTING
                    I_INTERFACE_CHECK                 = ' '
                    I_BYPASSING_BUFFER                = ' '
                    I_BUFFER_ACTIVE                   = ' '
                     I_CALLBACK_PROGRAM                = 'ZRAHUL_ALV_SFLIGHT2'
                    I_CALLBACK_PF_STATUS_SET          = ' '
                    I_CALLBACK_USER_COMMAND           = ' '
                     I_CALLBACK_TOP_OF_PAGE            = 'HEADER'
                    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
                    I_CALLBACK_HTML_END_OF_LIST       = ' '
                    I_STRUCTURE_NAME                  =
                    I_BACKGROUND_ID                   = ' '
                     I_GRID_TITLE                      = 'GRID 3'
                    I_GRID_SETTINGS                   =
                     IS_LAYOUT                         = LOUT
                     IT_FIELDCAT                       = IT_FCAT2
                    IT_EXCLUDING                      =
                    IT_SPECIAL_GROUPS                 =
                    IT_SORT                           =
                    IT_FILTER                         =
                    IS_SEL_HIDE                       =
                    I_DEFAULT                         = 'X'
                    I_SAVE                            = ' '
                    IS_VARIANT                        =
                    IT_EVENTS                         =
                    IT_EVENT_EXIT                     =
                    IS_PRINT                          =
                    IS_REPREP_ID                      =
                    I_SCREEN_START_COLUMN             = 0
                    I_SCREEN_START_LINE               = 0
                    I_SCREEN_END_COLUMN               = 0
                    I_SCREEN_END_LINE                 = 0
                    I_HTML_HEIGHT_TOP                 = 0
                    I_HTML_HEIGHT_END                 = 0
                    IT_ALV_GRAPHICS                   =
                    IT_HYPERLINK                      =
                    IT_ADD_FIELDCAT                   =
                    IT_EXCEPT_QINFO                   =
                    IR_SALV_FULLSCREEN_ADAPTER        =
                  IMPORTING
                    E_EXIT_CAUSED_BY_CALLER           =
                    ES_EXIT_CAUSED_BY_USER            =
                    TABLES
                      t_outtab                          = IT_SCURX
                  EXCEPTIONS
                    PROGRAM_ERROR                     = 1
                    OTHERS                            = 2
                  IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                  ENDIF.
ENDCASE.
ENDFORM.                    "click
this program runs fine when one navigation is used......but when both the foreign keys come in picture then its shows sequencialy...cant we jump directly to the third one which i require....
plz guide me.thank u.

in short i want help on table having multiple foreign keys....and how to navigate in this when working on ALV reports.....
its easy when using interactive reports by using sy-cucol and sy-curow.....
reply asap.
thank u in advance.

Add a Select List to a Report, for Updating a table.

I am working on Apex 3.0. I had to allow the Report could update a table. I added two checkbox to the report, and now I should add a Select List. I've tried a lot of ways but I don't know how can I pass the value selected, related to the ID of the row. I've tried with a JavaScript but I couldn't. A process should update the row on the DB when the user change the value on the select list. There is a save button that perform the process. How I could pass the ID of the row and the value to a PL/SQL process?
Many Thanks for your suggestions.
SELECT PFA.FOCUS_AREA_ID
,FOCUS_AREA_NAME,
apex_item.checkbox(1, FA.FOCUS_AREA_ID, DECODE(PFA.FOCUS_AREA_ID, null, ' ','checked="checked" ') ||
'id="chk'||rownum||'"'|| ' onclick="checking(this)" ') as Focus_AREA_CHK,
APEX_ITEM.SELECT_LIST(
*5,*
PFA.FOCUS_TYPE,
*'DIS;DIS,ENG;ENG,EXP;EXP,TGT;TGT',*
*'id="sl_'||FA.FOCUS_AREA_ID||' " ',*
*'YES',*
NULL,
*'-Select-',*
*DECODE(PFA.FOCUS_AREA_ID, null, 'disabled="disabled" ','' ) || ' --onchange="selectedElement(this)" ',*
*'NO'*
*)* "Type"
FROM PROGRAM_FOCUS_AREAS PFA,
FOCUS_AREAS FA
WHERE
FA.FOCUS_AREA_ID = PFA.FOCUS_AREA_ID(+)
AND :P151_PROGRAM_ID = PFA.VS_PROGRAM_ID(+)

**Deleted**
Edited by: user4498053 on Dec 27, 2011 11:24 AM

Report wizard cannot add tables having "hyphen" in their names

Similar Messages

Maybe you are looking for