Reporting BEX level Query

Hello, I posted this in a different forum which is wrong. sorry. i can't see my question there any way. this is my question. I built a SD report which has both Header and item level information. Report is running fine. a new requirement came and they want to see how many sales orders were processed in a given period of time (Variable) as well as the number of line items were processed in a given period of time. how can i accomplish it at the reporting level?
thanks.

See with the current layout if you switch on the results then it should show 2 for sales order count and 4 for item.
If you remove sales item from drill down then also the result will remain same.
Reason you have 2 sales orders and against that 4 items.
In case you need something other than this then please share the layout.
Note:The approach i mentioned in my last reply to get the count of item --In that we have used the concept of Nested Exception aggregation only.
Aggregation over aggregation is called Nested Exception aggregation.
Regards,
AL

Similar Messages

Performance of OBIEE report whereas SQL query behind it executed in 1-2 min

Facing lot of performance issues in OBIEE reports, whereas SQL query behind the report fetch data in 2-3 minutes. Reprot take around 1-2 hrs. Can anyone help to resolve this please?

(my 2c worth)... if the physical query runs for a reasonably short time but the report takes much longer to return it suggests the rendering process (ie. pivot view) is lagging.
To test this theory, go into Answers and remove all views from the request and leave a simple table view on the compound view. Run the report and the report should return around the same time the physical request takes to run because the table view is a very raw, un aggregated rendering process. Table views are nice and fast. If that works then you can focus on tuning your other views, ie. Pivot view. I've seen a simple pivot view take minutes to render what looks like a simple report because the underlying recordset is quite large.
I hope this helped. another quick trick you could try is applying aggregation in the formulas to aggregate things at the physical sql level so the returning result set isn't 5,000. depends what you're up to with the end report.
Edited by: user8300108 on 25-Feb-2010 04:40

Reg: Turkish characters issue on BW 3.10 Bex level and RSRT

Hi,
We are facing the same problem with the turkish characters, Our system is BW 3.10 (3.30 Cont) and ECC 6.0. The turkish characters are displaying correctly at the table level, but not at the RSRT or the Bex level.
The turkish characters are displaying correctly at the table, RSRT and Bex level if we load the same record from the Non-unicode Prod system to the Non-unicode BW Dev system, but if we load from the unicode QA system the same record is not displaying correctly.
Has anybody got a solution for this issue
thanks
Kalyan

Hi,
Yes, we installed transport request, which came with Integration Kit in our BW System.
We are also facing another issue,
ISSUE 2:
We have another publication with oracle DataSource , where we need to publish report(personalized) for 200 users.
Even we configured dedicated processing server for that publication and setting maximum no of connection to 250, it is throwing error like maximum no of concurrent connection reached.
Previously it was working with just 50 connections.
Now we are running this report by setting max no of connection to 500, and doing service restart after each publication.
Otherwise next publication will throw same error again.
Guide me on this also.
Regards
Baby

WebI Report using BW Query

Hi,
I am using WebI Report using BW Query. I don't see some Formulas in Universe which is there in BEx Query.
Did anybody face the same problem before?

Hi,
I meant that you should post in the forum the calculation contained in the formula that you cannot see in your universe.
But let's start from the begining since you are new to SAP: Did you generated the universe yourself? If the formula was added in the query after the universe was created then you must refresh your universe (In the Universe designer please select the option "Refresh structure" under the "view" menu) in order to get the newly created formula (I assume we are takling about a calculate figure here) in your universe also.
Regards,
Stratos

Can we only year value from "0FISCPER" (Fiscal Year/Period) at BEx level

Hi all,
I have two time characteristics "0FISCYEAR" (Fiscal Year) and "0FISCPER" (Fiscal Year/Period). In DSO initially "0FISCPER" was there and later request came to add "0FISCYEAR". Now data in char. "0FISCPER" is since beginning (from 2000) and for char. "0FISCYEAR" is since 2010.
User's requirement is to create a report which will display data Year wise.
My issue is if i am using "0FISCYEAR" then user is not able to see year instead it shows #. I dont want to do data reloading as this is GL data and hold huge no. of records in it.
So my concern is : Is there any way to use only year value from "0FISCPER" (Fiscal Year/Period) at BEx level? Is there any setting which I can apply and get the same value of Year as I can see from "0FISCYEAR". Please assist me on this.
Thanks,
Arvind

Hi Arvind,
Your requirement can be realised through virtual characteristics.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04be008-86cc-2c10-4bad-e517ea3f4c80?QuickLink=index&…
however, I would still suggest to reload the data. you will only need to reload years before 2010 and you can do this in phases.
Hope this helps.
-Swati.

Can I declare variables in Reports from SQL Query

Hi
I have a Report from SQL Query published as a portlet on a page among other reports. In the query report I am using the fuction WWCTX_API.GET_USER at quite a few places to filter the data returned to the user. Can I assingn the user id to a variable at some level & replace the fuction WWCTX_API.GET_USER with the variable in all the places.
For eg:
usr varchar2(25);
usr:= PORTAL30.WWCTX_API.GET_USER;
select USER_ID, USER_LVL, BUSINESS_ID, BRANCH_ID from crs_user where user_id=usr;
can i declare variable and assign the value like the above at any level(Report or Page Level) to the acces the variale in queries.
Thanks in advance

I have found that you can't use a * in a dynamic page.
Try this:
<ORACLE>
DECLARE
usr varchar2(25):=PORTAL30.WWCTX_API.GET_USER;
BEGIN
for c in
(SELECT <column_name> <alias> FROM PORTALWORK.CRS_USER WHERE USER_ID=usr)
Loop
htp.p(c.<alias>);
END;
</ORACLE>
You can also add table tags for column formating:
<table>
<tr><td>column 1</td></tr><tr><td nowrap>
<ORACLE>
DECLARE
usr varchar2(25):=PORTAL30.WWCTX_API.GET_USER;
BEGIN
for c in
(SELECT <column_name> <alias> FROM PORTALWORK.CRS_USER WHERE USER_ID=usr)
Loop
htp.p(c.<alias>);
END;
</ORACLE>
</td></tr></table>
Martin

Filter of viewing details at BEx level possible?

Hi Guys
I would like to know if we can filter the users to view records only related to him and the users who is working under him and no other users at Report design level OR it is possible only by assigning roles to the users under Tcode PFCG.
Thansk & Regards,
Rohini

Hi!
Thanks Somnath and Antonino
I got another query on this.Lets me explian you what is mainted at our system.
There is a auhtorization object maintained in Tcode RSSM, then there are 3 roles maintained at Tcode PFCG. but for one of the role that is manager role no authorization is maintained. And in the Query the same info object is used as authorization variable.
So here one thing is not clear to me is where is the data filtered depending upon the user. Like when the user is manager then he is able to his details and the users direct reporting to him and when the user is general user then he is able to details only related to him. And both this users are viewing the same reports. how and where is this filtering of data happening?
Thanks & Regards,
Rohini

How to copy existing query report into new query report in SQ00

Hi Experts,
Hi Experts,
I want to add fields "company code" "'region" to existing query report AQZZ/SAPQUERY/FKF1============
(list of vendor address) for this i done as following:
1.In SQ01 go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
2.I typed F1 in query field and click change button
3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing query report into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK i am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
please help regarding this which should be very beneficiary to my carrier.
Regards,
naresh

Hi Experts ,
I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
Regards,
naresh.

Crystal Report Date Prompt Query from SAP BW

Dear Support,
Using Crystal Report 2008 and Query is design In SAP BW
Date Prompt is made mandatory in Query at Query Designer.
Problem: Requirent is that Date promt shoud take value currentdate-1
when report is excuted first date prompt will show in that prompt value should have today date - 1 which is yesterday date.
how to pass formula to date prompt?
Thanks

If the prompt value should always be CurrentDate -1, then there is no need to use a prompt at all. Just put the formula to the selection criteria.
If you want the prompt to default to CurrentDate -1, while allowing the user to change the prompt to another date if they wish... That won't work. CR won't allow you to use a formula as the default value in a prompt.
If there is a BO Universe between you and the tables... IE, you're building against the universe, you'll need to get with the universe designer and have them make an alternate field available that has the formula hard coded in the SQL as opposed prompting.
HTH,
Jason

Query based Report (Reports From SQL Query)

Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
Can i increase a timeout of portal page, how i can do this?
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?

Can you post the URL that is giving you the page not found error ? I am not sure if I can be of much help though.
In order to increase your chances to get a reply you should also post your question in the Portal Forum - Oracle Application Server Portal
Edited by: Rodolfo Ferrari on Jun 16, 2009 3:49 PM

Adding update and delete buttons to a Report from SQL Query

There is an option when creating a QBE to add update and delete
links which i find quite useful, but this option doesn't seem to
be possible on a Report from SQL Query. Do i need to do
something special to add them? is the option located in a
different place?

Hi,
You can only add Update ,Delete in QBE Reports,
there is no option in Portal which can be used to
have these buttons in the Reports from Query Wizard or
Report from SQL Query.
Thanks
Vineet

Getting zero-sized reply error when running report from SQL query

Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Getting Zero Sized Reply error in report from SQL query

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Width of field in Report From SQL Query

I have created a report from SQL query with 15 columns being selected. However, no matter what column width and column type (pixel, char, percent) I enter in the column formatting tab of the report, I cannot get the report to format the column to the width I desire. It is always a fixed width. Does anyone have any suggestions?
Thanks,
Martin

Hi,
Char (used for ASCII format)
Displays the output in the specified number of
characters per line. For example, if you enter 20
in Width, the report displays 20 characters of the
column data in each line. If the number of
characters per line exceeds the specified
number, the remaining characters are wrapped
to the next line.
Pixel
Displays the output in the specified number of
pixels per row. For example, if you enter 10 in
Width, the column data displays 10 pixels of
data per line of the displayed table.
Percent
Displays the output in the specified percentage
of the table. For example, if you enter 25 in
Width, the column data displays in 25% of the
displayed table.
Thanks,
Sharmila

Need help in Report From SQL Query

Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?

user602513 wrote:
Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?Do you get any errors or warnings or it is just the slow speed which is the issue?
There could be a variety of reasons for the delayed processing of this report. That includes parameter settings for that page, cache settings, network configurations, etc.
- explore best optimization for your query;
- evaluate portal for best performance configuration; you may follow this note (Doc ID: *438794.1* ) for ideas;
- third: for that particular page carrying that report, you can use caching wisely. browser cache is neither decent for large files, nor practical. instead, explore the page cache settings that portal provides.
- also look for various log files (application.log and apache logs) if you are getting any warnings reflecting on some kind of processing halt.
- and last but not the least: if you happen to bring up a portal report with more than 10000 rows for display then think about the usage of the report. Evaluate whether that report is good/useful for anything?
HTH
AMN

Reporting BEX level Query

Similar Messages

Maybe you are looking for