Reports 6 margin problem

We have reports on reports builder 6 and when we r prininting it there 's a lareg margins in these reports and it's about 3.9 "
and it's random to be in the reports is there any to change this margins or make it constant values

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Omda20:
We have reports on reports builder 6 and when we r prininting it there 's a lareg margins in these reports and it's about 3.9 "
and it's random to be in the reports is there any to change this margins or make it constant values<HR></BLOCKQUOTE>
I seem to have the same probem. On my development pc the margins for a report are e.g 0.2" on the four sides. After compilation and installing on production pc, the bottom margin is always 0.875". This problem didn't occur in the 2.5/3.0 version of Oracle Reports. No solution found until now.
null

Similar Messages

Crystal report - margins problem

I have a problem with top and bottom margins in my report. In the designer view - File>Page Setup - I have the paper size (A4 210X297 cm). Both the top and bottom margins are set to 2 cm which, If I understand it correctly, printing should start exactly 2 cm from the top and end at 2 cm from the bottom of a page.
However, no matter what I do, it starts printing 1.5 cm from the top and ends at 3 cm from the bottom of a page.
I have the 'Dissociate Formatting page size and printer paper size turned off so that should not influence anything and even if it's turned on makes no difference.
In Designer view when I look at the ruler the Report Header - it is exactly 25.5 cm in length. For some reason unknown to me I can't make it any longer. If I add even 1 or 2 mm to the length, the printing spills over to a new page.
I'm printer to a HP laser printer - nothing fancy - other programs like Word prints to the same printer with no margin issues whatsoever.
I will appreciate it so much if someone can point me in the right direction, please.
Regards
Danie

Hi Danie,
the problem is not inside CR, not your printer, but how SBO print engine handles paper sizeing and margin. (for just one simple thing: set the margin inside SBO, and you'll notice nothing changes).
This is especially problematic with CR margins.
On load the print engine gets the paper sizes from windows, and sticks to them. In my experience, it handles the margins as CR:
fixed 2cm-s of any paper size ( this was my main problem, imagine it: printing on a 4,5*3,5 label, with 2cm margins =S, every other application did it right, from CR it was right, from CR to PDF to print it was right, from SBO PLD it was right, from SBO>CR>PDF>Print it was right, but no matter what i did, the SBO>CR>Print was using wrong margins).
Try dissociating the papersize in CR and setting custom sizes/margins, sometimes, after many trial and error that works.
I had made to date ~10 special sized/print scenario solution in CR (along many other standard sized reports), sometimes the above stated can achieved, but mostly i just add a corrected paper size to windows, set it as default and the ~100 trial and error falls back to ~15 rounds..
I'm sorry to hear your disappointed in CR, sometimes i'm also feel like that, and i completely agree that it is overrated, but i think it is a great solution for things. It's not a miracle tool, but it handles well in most default situation, and you can construct insanely complex reports with relative ease (if you lear how to utilize SQL inside CR along with Crystalsyntax). But i agree, handling papersizes it is.. well.. you know.
Lets hope will get the neat 2011 version someday to SBO..
Regards,
Daniel

Printing - Terrible Margin Problem

I have read all of the posts regarding margin problems.
Ill tried creating the custom 'iCal' size in Safari but nothing works.
When printing in week view all 4 margins spill over the edge.
This occurs whether printing to paper or PDF.
Any fixes to this or is it a bug?
PowerBook Mac OS X (10.4.4)

Hi,
While playing with the values of ImageableArea I'm getting changes in printout
but can't really find the correct combination of values because I'm just guessing
what the values mean..ImageableArea provides the bounding box of the area in which the printer may print for the page size named mediaOption. There will be one statement for each named page size supported by the device. DefaultImageableArea provides the mediaOption name of the default imageable area. Since there can be only one default page size, this value should be the same as the value of DefaultPageSize, DefaultPageRegion, and DefaultPaperDimension.
The syntax for defining imageable area is as follows:
*ImageableArea mediaOption: "llx lly urx ury"
*DefaultImageableArea: mediaOption | Unknown
ll stands for lower left corner and ur for upper right corner. The bounding box value of ImageableArea is given as four real numbers, representing the x and y coordinates of the lower left and upper right corners of the region, respectively, in the PostScript language default user space coordinate system. The x and y axes of a given page size correspond to the x and y axes of that page size in the PaperDimension entry.
Printing on UNIX with Oracle Reports
http://download.oracle.com/docs/cd/B14099_11/bi.1012/b14048/pbr_uxprt.htm
Regards,
Hussein

Report margin

Hi,
My problem is: The paper size is 4"x2" and I've design the report
to print with no margin in report builder,
but when I print the report from the printer, the margin is added.
I would like to know how to set the report margin to 0.
If you know, please tell me asap.
Thanks in advance,

There will always be some margin, since printers can only print to the edge of their printable areas (i.e., a printer cannot print to the very edge of a piece of paper).
Regards,
Danny

Report Margins

Can anyone please tell me how to change the report margins so that it prints landscape.
I have changed the page setup, but this does not seem to work for the body of the report..
Thank you.

Hi Tammy
Change the "Orientation" property of secion and see if it solves your problem.
Regards
Sriipathy

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Sub Report Performance problem

Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform. We use Crystal Reports 2008 (12.0.0.683) to do our reporting.
We upgraded from Crystal Reports XI and our reports are taking a long time to render?... Is there any evidence of other companies experiencing this trouble? Are there any degraded performance issues when moving from XI to 2008?
In some cases we utilizing a small simple sub report.
Any help appreciated. Thanks.

Hi Billy,
Subreports in detail sections are never a good idea. Example, you have 100 records returned int he main report and if that field is your subreport link it causes the subreport to run 100 times. Your database is being queried 101 times.
Also, the default time out for database is typically 1 minute, could be you need to verify your report and database so CR can "clean up" any wrong pointers.
It's always better to do the data collection server side if and when possible, after all that's what they do best.
Not much detail to go on so I can't say if it's a report design problem other than the above or not. It could be also that .NET takes time to load all of the CR assemblies so depending on how you have your app configured depends on the delay. If you load a dummy report when your starts up to pre-load CR runtime then subsequent reports will be much faster.
Also check off all of the Verify Database options, you may be telling CR to verify each time which on big databases can cause a delay also.
Thank you
Don

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Report a problem form does not pop up

My 5 year old bought $80 of stuff with an In App purchase in error yesterday. I tried to use the REport a problem link. But all that pops up is a webpage:
http://www.apple.com/ca/support/itunes/
When I click 'Report a problem'
How do I get it cancelled, the link does not work.

I can confirm that report a problem sends me nowhere when I click it. Funny how when it comes to reporting that it doesn't work

Report a problem is not working on Windows 64 bit

I just downloaded the latest 10.5.3.3 version of ITunes for 64 bit windows. When I go to my purchase history, and click "Report a Problem" it just fires up the browser with the Apple Support page. http://www.apple.com/support/itunes/

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue with your purchase to the iTunes Store.
Regards.

'Report a Problem' is not working at all on my iMac. What do I do?

I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
I have not been able to use the Problem Report interface for over a month.
No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
The same thing happens with Apple software as well as third-party. I have no idea what to do.
Any help will be much appreciated.
-S.

StefanoBlack wrote:
None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often.

Report a Problem is not working

Accidentally a 6 years old boy installed a paid game and i want a refund .
i tried to report a problem but when itunes links me with browser to loging so i can report aproblem after i sing in this message appears "The page you're looking for can't be found."
anyone can tell me if there is another way i can do it?
thanks

To report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store
Also, you may want to look at using Restrictions (Parental controls)
iOS Restrictions:
http://support.apple.com/kb/HT4213
iTunes: Parental Controls:
http://support.apple.com/kb/HT1904
Mac App Store Parental Controls:
http://support.apple.com/kb/PH11496
Mac OS X: Parental Controls (video)
http://support.apple.com/kb/VI28

REPORT A PROBLEM link does not work

I received an email with an invoice for a purchase of 5 apps that I DID NOT PURCHASE. IT'S ALL IN CHINESE AND I DON'T EVEN KNOW HOW TO READ CHINESE. After following a tutorial on how to report a problem, i clicked on that link 'report a problem' next to the apps the thief purchased BUT IT BOUNCES ME BACK TO THE ITUNES SUPPORT PAGE. Unlike the tutorial, it did not bounce me to the 'select your problem' page. I want to report this problem so that I may get a refund on those apps i did not buy ( and do not even have on my ipod! ). Please help me.

I can confirm that report a problem sends me nowhere when I click it. Funny how when it comes to reporting that it doesn't work

Reports 6 margin problem

Similar Messages

Maybe you are looking for