Reports for secondry cost elements

Hi,
I have an issue with regarding secondry cost element with cost element category 42, now i need a report, which should conatine all senders (cost objects or cost elements) details, plz some help me out.

Hi Vijay,
As far as standard reporting goes, you can see sender cost center, receiver cost center and secondary assessment cost element from the CO line item report(KSB1 or any other co report). But you can't see what's the sender cost element group. May be development needs to be done if your requirement is sender cost element group.
I hope this clarifies.
Regards
Rajesh A

Similar Messages

  • Report for Missing Cost Elements

    Hello Friends
    I want to know if there is any report which shall give the list of missing cost elements in the system. I mean I want to know the list of primary cost elements that are still not created in the system as compared to P&L account GLs(Hence such cost elements need to be created now)
    Thank you in advance
    Best Regards
    Prashant S

    Hi,
    T-Code KAH3, enter cost element group that covers all cost elements so far, go to "Extras / Check and Help functions / Check completeness". The "missing" primary cost elements are displayed, but ensure, that they really should be created as cost element.
    Best regards, Christian

  • Line item report on secondary cost element (cat - 21)

    Hi Gurus,
    Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
    Please clear this doubt. thank you

    Hi Mohit,
    I hope you can have line item report @ order and WBS element stright away...
    for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
    same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
    Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
    I hope it helps a lot if I understand your query right
    Regards..
    Jose

  • How to find the origin costs(primary CE) for Assessment cost elements

    Hi All,
    How can we trace the Orgin costs(cost senders) for Assessment cost element.
    I have to create Co report where user wants the Costs senders(primary cost elements) details for Assessment cost element.
    Our cycles are defined as senders -  cost center and receiver's are Internal orders.
    so for assessement cost elements what are the primary cost senders.
    Is it possible to trace the primary cost elements details for Assessment cost elements.
    Regards,
    Raj

    Hi Chirstian,
    Thanks for the information.
    I have done the same as per your advise.
    I am trying to pull all the primary cost elements which are posted with my sender cost center's.
    All the cycles are defined as share in % = 100%.
    But unfortunately all the debits are of primary cost elements is not equal to credit amount of my Assessment cost element.
    The figures are very far and couldn't trace the difference amount. Is there any other report in SAP or how i can define in report painter to meet this requirement.
    Thanks & Regards,
    Raj.

  • Analysis report for standard cost in CK33N

    Hi,
    Analysis report for standard cost
    Using variant Z003 in CK11N.
    Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
    In CK33 you compare the 2011 cost for the product with the proposed cost for the next year.  For some parts it works and for others it splits the lines,  though the calculation is still correct.
    Regards,
    T.Harish Kumar

    Hi Revital,
    I believe the last option is correct.
    Thanks,
    Gordon

  • Report for Landing cost

    Hi SAP Guru's,
    Do we have any standard report for Landing Cost in the procurements, please suggest.
    Thanks,
    Reddy

    Hi Manish,
              We need to get one report with the total cost of material procurement which includes the excise, transportation and insurance.
    Thanks,
    Reddy.

  • Table that contains the change date for every cost element

    Hi everyone!
    Can anyone please help me find a table which contains the change date for every cost element?
    Thanks,Jess

    If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
    This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
    Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
    Hope this helps
    Deepa

  • OKB9 for secondary cost element

    Hello all,
    Does anyone know a way to rederive cost center for secondary cost element posting? We have a need to re-derive the cost center of a production order at the time of settlement. I tried OKB9 and OKC9 and it didn't work.
    Any help will be greatly appreciated.
    Thanks,
    Cassandra

    Hi,
    I am not sure if i understand your scenario. However, if you want to control the settlement to Cost Center on Cost Elements, you can use the Source Structure which will be assigned in the settlement parameters for the Production Order.
    Kind Regards
    Umapathi G

  • Number convention for Secondary cost element

    Hi,
    Anyone can guide me how to check the number convention for secondary cost element being set up in SAP?
    thank you

    Hi,
    The best way so far i have experienced is:
    Start the numbering with two digits from your company code and then cost element category and then the numerics.  If you have too many Cost elements, better to have 10 Digit numbering system.
    Assumption: You have multiple company codes
    For Example you company code is TP01
    Activity Type Cost element:
    TP43000001 - Labour Hours
    TP43000002 - Machine hours
    and so on
    This is easy for identifying either from the consultant point of view of the end user point of view
    Best Regards
    Surya

  • BAPI for  ""Change Cost Element / Activity Input Planning ""

    Hi
    Is there any BAPI for  ""Change Cost Element / Activity Input Planning "" ( TC KP06) as there is BDC for that but is goes through lot of steps . ( TC OKKS, KP04, KP06 )
    So if any one know the BAPI for the same please let me know,  and if possible send me your code also it will be really help full.
    Regards

    o   OBJECT_INDEX - Index uniquely identifying the row and thus the           
        object. The index must be greater than zero and may only appear once     
        in the table. If the index does not exist in INDEXSTRUCTURE, the row     
        is ignored.                                                                               
    o   COSTCENTER    - Cost center that includes the activity.                                                                               
    o   ACTTYPE       - Activity type that includes the activity. You must       
        fill this together with COSTCENTER. You only need it for an activity     
        input that is activity-dependent.                                                                               
    o   CO_BUSPROC - Business process that includes the activity.                                                                               
    o   ORDERID       - Order that includes the activity.                                                                               
    o   WBS_ELEMENT  - WBS element that includes the activity                                                                               
    You may fill one object only,for example COSTCENTER, CO_BUSPROC,             
    ORDERID, or WBS_ELEMENT.                                                     

  • Table For Secondary Cost Elements

    Dear Folks,
                  Please Help me for getting details (TABLES)  of Secondary Cost elements Actual Line items Date wise and Cost Center wise
    Thanks in advance
    Regaards
    ASHOK K

    check this might help you..
    Tables to be refered for secondary cost element.
    Regards
    Kumar

  • Planning for Assessment cost element

    Hi
    How we can do the planning for Assessment cost element ?? why it is different from other secondary cost element planning.
    Thanks
    Deepak

    both are two different things in term of business applications.
    When you know exact amount to be planned at cost center level then this is SCE planning and when you dont know exact amount then that can be done through assessment planning.
    Hope this helps you.
    Ashokl

  • Overlapping values were maintained for characteristic Cost Element

    Dear SAP Gurus,
    I am Finding one error while chaing my Primary Cost Planning in CJ40. The error note as follows.
    *"Overlapping values were maintained for characteristic Cost Element*
    *Message no. K9050
    Diagnosis
    You maintained several characterisic values for characteristic Cost Element in layout maintenance or in the entry screen for planning.
    Within these characteristic values
    individual values appear more than once
    individual values are included in an inteval
    intervals overlap
    These duplications and overlaps are not forseen in planning.
    System Response
    The entries for characteristic Cost Element are rejected.
    Procedure
    Change the entries in the layout maintenance/entry screen for planning."
    Please help.
    Rgds
    Rohit

    Hi,
    Step1. Go to CJ40.
    enter in the cost planning area->Select the topmost line item->Primary cost.
    Then Extras->Group Display--> Cost element
    Is it the same what you have checked in the KAH2?
    Step2: Then check Extras---> Error Log
    Step3: Then check Extras--->Diplay Profile
    Step4: Now Go to Tcode: KP34 and check the layout assigned to WBS elements: Cost element/acty inputs and make sure the check mark is present against it in item column.
    Step 5: Now check Extras--> Display Profile.
    Make sure its same as that of Step4.
    Hope its useful.
    Reward points if useful.
    Thanks..

  • Cost Element Report for all cost objects

    Hello,
    Is there any standard SAP report where it can list down all cost elements, and their line item/total postings done to various CO Objects in one shot.
    We have CE/CCTR, CE/IO, etc, but if we can have one report which can list all cost elements and postings done via it to different cost objects - cost centers, internal orders, WBS, etc, might be very handy to us.
    Thanks
    Balla

    Hi Balla,
    Please use S_SL0_21000007 for your requirement.
    It gives cost element postings to different cost objects.
    regards,
    makrand

  • RW report on CCSS table: for some cost element key figure SWTG empty

    Dears.
    Could you kindly help to solve strange issue with report in Report Painter?
    I have 2 basic key figure in report
    SWTG - Total cost in transaction currency
    SWOG - Total cost in object currency
    In report some lines have the only SWOG figures and SWTG field empty.
    It looks strange, because all costs are posted similarly in the same transaction (via cash journal FBCJ) and they all have postings in accounting and controlling.
    Thanks in advance.
    Kind regards,
    Roman.

    I understand the reason - if there were postings in different currencies, the column "Total cost in transaction currency" is shown as undeterminable values. It's OK.
    But the problem is - if it is done even once, this "spoils" cost element and in "normal" period with one currency postings it will anyway show crosses as undeterminable values.
    How to fix it?
    Thanks,
    Regards,
    Roman.

Maybe you are looking for