Reports that are slow to load
I am adding a report in my project at the vb.net 2005 but they are slow to load. What is the best way to do this task to be loaded into faster?.
I am using the Crystal Report version 2008 with Visual Studio.Net 2005 in a Windows application.
The evidence I have done so much in development environment as user stations, in both situations the burden of reporting slow.
I am adding the reports through a Crystal Report Viewer
Very thanks and greetings from Costa Rica.
Look at where and as I put the code Ludek
Private Sub Frm_Reporte1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Reporte As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
Reporte.Load("
glauco\Reportes\Ventas 08\Vta - Sugerido Pedidos.rpt")
End Sub
However, the form still takes 6 seconds to load and reporting over 2 seconds.
I said, I'm only using a CrystalReportViewer in which I have directed the report from the server by selecting Properties from the menu ReporSource of CrystalReportViewer.
Do not know if this will have something to do. Honestly, I have worried about this situation because I have everything ready to take the project as soon as possible.
Again, thank you very helpful.
Similar Messages
-
Pages are slow to load or stop loading
Once I'm connected to wi-fi, my pages are slow to load or stop loading and tell me 'I'm not connected".
If you are having the problem on more than one computer it would appear not to be a computer fault or your browser that is the problem.
The first thing I would do is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out problems and will also give you a "clean sheet" to start some diagnostics from.
If this doesn't help please post what Infinity package you are on, I assume with 18Mbps it's Infinity 1 but please confirm, and do you have an Openreach modem and what homehub you have.
Also run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/ -
Contacts are slow to load and scroll, 5 second delay or longer!
Contacts are slow to load and scroll, 5 second delay or longer! Im very frustrated with my iphone 3g! Contacts are so slow I cant believe it. Also the time it takes to go from contacts to the home screen is slow. Whats the fix? HELP~!
I've also seen the delay - ever since I got my 3G phone. Update 2.0.1 was said to help this, but I think it's more affected by apps on the system, and how often you turn the phone off. Still not enough to really bother me, but wish it was faster. Hopefully another update will help. I'm sure it doesn't help that I have 2 different email accounts (1 is pretty big, lots of data ) and the fact I have almost 1000 contacts in mine.
-
Open Order reports that are tied to MRP?
hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
i am aware of these reports
1. ME2M (by material)
2. ME2L (by vendor)
3. ME2N (by purchase order number)
Does SAP provide Open Order reports that are tied to MRP?
thanks
alahariHow do you define due?
if you mean has to be delivered today
then you can still use the reports mentioned
you use selection parameter WE101
and in selection screen field delivery date, you enter the todays date, then hit F2 at this field and choose smaller equal. So you will get all open POs with delivery date from the past until today. -
How to identify reports that are using a specific universe object?
Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?
Hi Samuel,
In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.
Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins
Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\
May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
Regards,
Sarbhjeet Kaur -
How to know the list of reports that are in usage
Hello,
How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
Regards,
Anand.Hi,
Pl look at following tables if you need any further detailed information
Table Name Use of the table
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references .
To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSRREPDIR
Directory of all reports (Query GENUNIID) .
To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSZCOMPDIR Directory of reporting components.
To get query change status (version, last changed by, owner) of a cube.
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Thanks and regards -
I just downloaded the most recent version of safari (beta 3) and videos posted on websites are still EXTREMELY slow to load. Are there any updates that would help make the videos load quicker or is it caused by limited space on the hard drive? Any comments/answers would be helpful. Thanks!
EWere you able to confirm any suspicions the browser could be at fault
(or not) by trying to download the same video content through a different
browser with current proper plugins, and etc?
The speed of the internet connection is among prime things to confirm
and consider when awaiting slow internet content downloads. Also, all
system performance can be affected by insufficient hard drive freespace
or flex-space for the applications and for use as virtual memory.
The actual download speed of a file may vary through a combination of
several influences or conditions within and from without the computer. -
Hiding reports that are used by dashboards
Hi:
We are using some Webi reports for use in Live Office/Xcelsius. While we want the users to be able to consume the data from these reports in the Xcelsius dashboards (which reside in InfoView as well as on Desktops), we don't want them to be able to see these reports in InfoView. Is there a way to "hide" these reports from the users but still give the users the ability to refresh the dashboard data that uses these reports? Thanks.
-NishantGo to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks. -
Query Builder - Find WEBI reports that are using a table
I am trying to find list of WEBI reports using a specific table. This specific table is used in only 1 universe.
Though I could successfully find list of reports that use this universe, I am unable to find drill down further and find the subset of reports using this table/object.
SELECT si_name, SI_KIND, si_id, SI_PARENTID,SI_AUTHOR,SI_OWNER FROM CI_INFOOBJECTS, CI_APPOBJECTS
WHERE PARENTS("SI_NAME='WEBI-UNIVERSE'","SI_NAME ='MyUniverse'")
Is it possible to find the information I am looking for using query builder.
Also, for a given WEBI report I am trying to find the list of report names and the folder they reside in:
Select SI_NAME, SI_ID, SI_PATH, SI_KIND, SI_OWNER From CI_INFOOBJECTS, CI_APPOBJECTS WHERE
PARENTS("SI_NAME='Folder Hierarchy'",
"PARENTS('SI_NAME=''WEBI-UNIVERSE'' ', 'SI_NAME=''MyUniverse'' ')" )
The above query just gives me the folder names. I am looking to find the report names as well the the folder (and preferably the path) in a single query. Is that possible.Sri,
With respect to your 1st requirement:
In BusinessObjects 6.5 it was possible. However, post BOXIR2 this information could not be retrieved from CMS via query builder. I agree with Jorge Sosua's comment above.
With respect to your 2nd requirement:
The field 'SI_PATH' will retrieve Filestore path(physical path). If you were referring logical path(Public folder path or psuedo-reference path) will you please refer my respone to Kelly Stone at BusinessObjects Query builder queries - Part II , If this may assist you.
Regards,
Sandeep -
I have a pretty good but basic understanding of web site
management but have discovered during testing that some of my sites
are pretty slow to respond. I understand how to set image densities
to 72ppi for monitor display and have been pretty consciencous
about that, but I'm finding that certain sites I have built are
still slow in spite of my best efforts.
Obviously there are some techniques I could use a little
education on.
Without getting too exotic, are there some simple, common
practices designers use to help the load speed of web pages?
I'm using simple html (no dynamics) and are just dealing with
text and images.
If you need to see an example, this site's homepage sometimes
can take a bit to load. I did say "sometimes" so obviously not all
the loading issues are design related. PLEASE note this is a PG-13
site (no porn or anything too bad; just adult humor and comment).
http://home.comcast.net/~buckanddusty/
Thanks
TomThat particular page is 257K. As such, it will take about 60
seconds to
completely load when accessed on a 56k dialup connection.
There is no magic
about this effort to minimize this loading time -
1. Use as few images as you can
2. Those images that you use should be no larger
(dimensionally) than the
smallest you can get away with to deliver the look/message
3. Those images that you use should be optimized (by reducing
their
quality) until they are almost unacceptable
That is about all you can do.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TCarp" <[email protected]> wrote in message
news:flg06k$5j2$[email protected]..
>I have a pretty good but basic understanding of web site
management but
>have
> discovered during testing that some of my sites are
pretty slow to
> respond. I
> understand how to set image densities to 72ppi for
monitor display and
> have
> been pretty consciencous about that, but I'm finding
that certain sites I
> have
> built are still slow in spite of my best efforts.
>
> Obviously there are some techniques I could use a little
education on.
>
> Without getting too exotic, are there some simple,
common practices
> designers
> use to help the load speed of web pages?
>
> I'm using simple html (no dynamics) and are just dealing
with text and
> images.
>
> If you need to see an example, this site's homepage
sometimes can take a
> bit
> to load. I did say "sometimes" so obviously not all the
loading issues
> are
> design related. PLEASE note this is a PG-13 site (no
porn or anything too
> bad;
> just adult humor and comment).
>
>
http://home.comcast.net/~buckanddusty/
>
> Thanks
>
> Tom
>
>
> -
Web pages are slow to load up.
I am having trouble loading up web pages, they do eventually load but its very slow. I wan't to delete unwanted/ junk files how do i do this
The first thing you should do is check your internet connection, try it out here:
http://www.speedtest.net
One important thing to note is to ignore the ads at ALL COSTS, that mac clean thing is NOT something you want
If your results are 5mbs or less, I would say its your internet connection to check.
Secondly, use an up to date browser such as chrome or safari. If you have any exemptions, turn them off.
Those are some tips I have, I have no clue how to remove junk files to speed up your browsing experience.
Hope this helped -
A lot of us have iBooks that are slowing down.
What iBook do you have? Memory? CPU usage? OS? Etc.
I purchased my iBook in January of this year. 1.42, 14", 512 memory.
It ran so fast. Faster than my 1.25 Power PC G4 at work! I installed Tiger a few month or so ago and now it's running much slower than it did. I've reinstalled the OS, removed CS2 and Dreamweaver (since they were the last installed), verified and repaired disks.
After updating to 10.4,2, system profiler now says "CPU Speed 1.33" even though it is 1.42. ???
CPU
Photoshop has 32.80, Safari has 3.5, Itunes 1.9
147mb of inactive memory.
I have 44.05g free on a 80g hard drive.
Only thing connected is a bluetooth mouse.
I'm going back to the Genius Bar tomorrow. I'm extremely upset that my iBook is running so slow.I purchased my iBook in January of this year. 1.42, 14", 512 memory.
If you purchased your ibook in January your CPU speed is in fact 1.33ghz. The latest speed bumps from 1.33ghz to 1.42ghz on the 14" happened in July of 2005. Try repairing disk permissions and optimizing the disk to see if that helps. (Run a program like Onyx, Cocktail, or MacJanitor to do this or do it manually) Another user went as far as purchasing DiskWarrior (which is not a bad idea) to repair and optimize his HD and found that the 'peppiness' returned.
With 512mb of ram you will probably notice a larger slow down than on a machine with 1g. 512mb is the minimum amount of ram that is recommended for running OSX. -
How long should a DVD take to load up and start playing?
Mine seem to take about 60 minutes. It feels like forever.
I don't remeber it taking so long.
Has something changed?
(The same is true on Macpro.
DVD's take a really long time to cue up.)For mine it takes about a minute and a half at most. I guess that would depend on your computer's speed, specs, etc.
-
What are extension of a reports that are stored
Oracle Reports 9i
Hai All Gurus
when we created a report we store the reports at what extension the reports are stored
For example in forms
binary are stored with .fmb
executable are stored with .fmx
text are stored with .fmt
Like wise with extension the reports are stored
let give some good answer with example
Thanks & regards
Srikkanth.Mhi,
oracle reports stored this type of extensions .
REP - - > ( Report Binary Run only file )
RDF - -> ( Report Binary file )
TDF - -> ( Report Template Binary File )
REX - -> ( Report ASCII file ) -
Emails From a Few People are Large and Are Slow to Load
We have three or four people who, when they send a normal, text only email on our Microsoft Exchange server using Outlook 2013, it results in an email
that is around 200 KB and takes much longer than usual to load. This has been going on for several months. It only affects these few people, but at least one more person has started exhibiting the problem since we noticed it.Hi,
Based on your description, the size of emails from these affected users you mentioned increased.
Please check if they use customized organizational forms when sending emails.
Please check if the issue persists when they send email using OWA.
Please check if there is any transport rule against these users in Exchange server.
Best regards,
Belinda Ma
TechNet Community Support
Maybe you are looking for
-
Trouble with Mail and Maverick
Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.
-
Production order settlement (co88/ko88)
when we settle the production order variances , it will take one account from OBYC(t-code)/PRD-PRF. But how does systemdetermines the other account? and what should be the GL entry? Like Credit which balnce sheet account /P&l account Or debit which b
-
How to print full pathname of print job
hello, i am planning on printing 100s of documents of various types (ms word, pdfs, excel files, etc). i am using snow leapord on a new imac, printing to a brother 5370DW laser printer. is there anyway i can setup this system so that when i send a pr
-
QUESTION : when I log into hotmail on my new ipad, I only see inbox where I retrieve my messages but cannot see the word ''New'' which would allow me to send emails the way it would be on a desk pc. So I can retrieve my messages but cannot send ???
-
Why won't the project manager export all of my media when copying to a new a folder?
Trying to consolidate a project by using the project manager. It exports most of the files fine but some consistently won't copy to the new folder. Any idea what causes this? It's pretty frustrating considering I'm supposed to hand over a hard drive