Request guidance 2 attnd interviews - xi

Hi 2 All,
basically i am an abaper, recently learnt xi frm one of my gud frnd and planning to work on XI but i am clue less how exactly i need 2 prepare 4 interviews. can any one help me with ur valuable suggestions / guidance / tips and interview qstns.
tnx in advance
vizee

Hi,
The type of questions which can be asked are :
-->Steps required to configure a scenario
-->Types of mapping
-->which all configurations you need to do in R/3
for an Idoc to file scenario
-->Questions regarding the interfaces you have worked
on
-->Qestions on adapters eg. Idoc , RFC etc
-->How to configure JDBC Adapter(Sender & Receiver)
-->Qestions on Content conversion
-->Questions on BPM and the step types in BPM.
-->Questions on ALERTS. How to configure Alerts, alert rules, etc.
The below info will help you study it easily:

-->Architecture of XI

-->Steps required to configure a scenario
1. Interface Determination-- RB_SPLIT and RB_CLASSIC, condtional Interface Determination
2. Receiver Determination -- Conditional Receiver Determination.
3. Sender / Receiver Agreement-- Why doesnt IDOC and HTTP have a sender agreement, etc.
Flow of how XI determines the configuration scenario
>>Types of mapping
1. Types of Java Mapping -- DOM and SAX Parser. Advantages and Disadvantages.
2. XSLT mapping
3. Graphical Mapping--
Questions on context change, standard functions in XI etc.
-->Qestions on adapters
1. Which adpaters run on j2ee engine and which run on ABAP stack.
2. Use of each adapter
-->Qestions on Content conversion 
1. how and why is content conversion performed.

-->Questions on BPM and the step types in BPM.
1. Correlation
2. synch/asynch bridge
3. Collect pattern.
4. For each and par for each in a block
5. send synchronously and asynchronously.
6. Step types in BPM.

-->Questions on ALERTS. 
1. How do u define Alert Category, rules, etc.
2. How do you test an Alert.
3. Alerts in a BPM
-->Architecture of XI. 
1.How and what are the stacks available in XI
2. Need for datatype, message type, message interface, message mapping, interface mapping, etc.
3. Synch/ Asynch/ outbound/inbound/ abstract interfaces, etc.
How do you monitor your messages in XI.
1. What is the difference between the monitoring done on the RunTimeWorkBench and the one done using SXMB_MONI.
2. What is End to End Monitoring, Performance Monitoring, Cache Montioring etc.
3. What is a Business System, Technical System, Logical System, and other questions related to the System Landscape Directory (SLD ).
Also go through the following links:
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://sap.ittoolbox.com/documents/document.asp?i=3240
http://www.techinterviews.com/?p=198.
http://www.fundoosite.com/interview-questions/type.asp?iType=72
http://www.sapassist.com/documents/document.asp?i=3240
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm.
http://www.sap-img.com/business/sap-bw-interview-questions.htm
http://www.sap-img.com/business/sap-bw-interview-questions-2.htm
http://www.techinterviews.com/?p=184
http://rapidshare.de/files/3829216/Bw_Interview_Questions.pdf.html
Regards,
Abhy
Message was edited by: Abhy Thomas

Similar Messages

Requesting guidance

Hey all, I've recently gotten a request that I need some help with. We have a small network which is a mixture of Wired and Wireless and on the Wireless network we have several SSID's a couple using 802.1X authenticaion and a couple using PSK. We also have an Open SSID for customers. What I have been tasked with is creating another SSID that will be used mainly by staff for their personal use off the domain. Eg. someone has a smartphone and wants to use skype or some other app on it. I don't want to leave is open however i would like to centrally manage the SSID to be able to tie in usage to a specific employee ID and be able to run reports etc. At the end of the day it is to be open but not lawless. Anybody have any ideas if this is something that is native to the 4402 or do i need a 3rd party software that i can used to accomplish this? Any guidance is appreciated

So, with the number of SSID you currently have, I wouldn't want to add another one. Remember the more SSID you have, the more interference and utilization you are creating.
That being said, I'd just stick them on the guest network, and maybe use authentication back to your AAA servers. You can still tie the device to the user that way.
as for 'lawless' that depends on what you have upstream. i.e. proxy, webfilter etc.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Data Federator - Building Web Services Data Source - Request Guidance

Hello -
I am trying to build a web services data source in Data Federator.
I have:
1. In ECC, I have created a web service, proxy, port, endpoint, etc. and am testing it with WS Navigator
2. I have created a Project in Data Federator of the type web service
 a. Here I have assigned the WSDL URL (generated in ECC) as the URL
 b. I have setup web service authentication using the same userid, pwd in the web services definition (note: I have set the
 web services authentication to 'NONE' to avoing authorization issues)\
 c. I am now trying to "Generate Operations"
I keep getting the error :
The File Access Parameters are not valid (directory path = <HERE IS THE PATH TO THE WSDL WITH THE HOST/PORT stripped OUT>; file pattern = document
I believe that it is finding the WSDL, becuase when I change the WSDL from 'Document' to 'RPC', the error changes with the file pattern = rpc.
What needs to be done to the file access parameter piece.
PLEASE provide guidance. Thanks.
- abhi

Ananya,
We are using XI to load data to BI from source system. XI basically uses the same concept as Web Services - Real time data concept via RFC embeded in Proxies.
I was using web services to test data load - eventually we will use XI.
KJs blog is pretty good. I was able to get data loaded - after several iterations and several OSS notes. It is still not perfect - there are several manual steps . I am going to pick KJs brain on that.
We are on SP10 and looks like there are several bugs in RSRDA. Some of these are addressed in SP11 an SP12.
Some notes to consider are
0001003963, 0001008276,0001009260 and 001003265.
Let me know if you have any questions.

Requesting guidance on repair versus replace for iBook G4 (2005)

I'm looking for some guidance in deciding to upgrade/repair for my iBook G4, operating Mac OS X 10.4.11. I've gotten to the point where I don't seem to be able to run more than one application at a time (for example be online and listen to music at the same time), download more photos into iPhoto (get an outa short term memory message), or watch most video online. It seems that I can't get the most recent versions of some applications as well, for example can't upgrade to the most recent version of flash player, which rules out online TV. I'm not knowledgeable enough to be able to tell if I should just give up on this old workhorse or not. I'd be totally willing to spend $200 ish and have someone clean things up, delete useless stuff, etc, but I don't even know if that is worth it and I'd just be throwing money away. The only other problems it has is lousy battery (can't really be unplugged for more than 5 minutes) but I can live with that for my purposes. I'm open to suggestions about how to troubleshoot, ie decision matrix for the mostly clueless. Thanks.

Hi, and welcome to Apple Support Communities.
I would strongly recommend upgrading to a newer MacBook or MacBook Pro.
Chances are the hard drive is full (or nearly so), and also getting old, since the very newest iBook is over five years old at this point.
If you start replacing things, you could soon approach the cost of a newer computer.

Need Guidance for interview preparations

Hello,
I am preparing for interviews. I am revising ABAP and webdynpro. can you suggest me which topics are more important from interview point?

Hi,
This is not right place to search interview q's.
Please do search in GOOGLE you find lots of material..
http://www.google.co.in/search?hl=en&source=hp&q=webdynproabapinterviewquestions&meta=&aq=1s&aqi=g-s7g2g-m1&aql=&oq=webdynpro+abap
Cheers,
Kris.

Long running update command -Request guidance.!!!

Guys,
I'm struck up with an update query below , that has been running for hours together.
UPDATE ft
SET fact_1 = ( SELECT --+ USE_HASH(fb ft1)
fb.fact_2
FROM ODS_WO_WMIN04_FB fb, ft1 WHERE
AND ft1.geo = fb.geo
AND ft1.prod = fb.prod
AND ft1.cust = fb.cust
AND ft1.geo = ft.geo
AND ft1.prod = ft.prod
AND ft1.cust = ft.cust
AND ft1.file = 123
AND ft.file_ = 123)
The data in the underlying tables ranges to a few thousands, so there is no reason why it should run for 3 hours now.
When I check if there exists a lock on the tables,it is so.
SQL:cdwcp1 -> select
2 object_name,
3 object_type,
4 session_id,
5 type, -- Type or system/user lock
6 lmode, -- lock mode in which session holds lock
7 request,
8 block,
9 ctime -- Time since current mode was granted
10 from
11 v$locked_object, all_objects, v$lock
12 where
13 v$locked_object.object_id = all_objects.object_id AND
14 v$lock.id1 = all_objects.object_id AND
15 v$lock.sid = v$locked_object.session_id
16 order by
17 session_id, ctime desc, object_name
18 /
OBJECT_NAME OBJECT_TYPE SESSION_ID TY LMODE
REQUEST BLOCK CTIME
FT TABLE 144 TM 3
0 0 31263
Could somone let me know what is there in the udpate that could've caused the lock that holds there for such long?
Thank you all!!!!
Bhagat

PLAN_TABLE_OUTPUT
| Id | Operation                            | Name                        | Rows | Bytes | Cost | Pstart| Pstop |
|   0 | UPDATE STATEMENT                     |                              |   866K|    75M|   206 |       |       |
|   1 | UPDATE                              | FT       |       |       |       |       |       |
|   2 |   TABLE ACCESS FULL                  | FT       |   866K|    75M|   206 |       |       |
|   3 |   FILTER                             |                              |       |       |       |       |       |
|   4 |    HASH JOIN                         |                              |     1 |   147 |    24 |       |       |
|   5 |     TABLE ACCESS BY LOCAL INDEX ROWID| FB             |     1 |    69 |     1 |   117 |   117 |
|   6 |      BITMAP CONVERSION TO ROWIDS     |                              |       |       |       |       |       |
|   7 |       BITMAP INDEX SINGLE VALUE      | FB_IDX1        |       |       |       |   117 |   117 |
|   8 |     TABLE ACCESS BY INDEX ROWID      | FT       |     1 |    78 |    21 |       |       |
|   9 |      BITMAP CONVERSION TO ROWIDS     |                              |       |       |       |       |       |
| 10 |       BITMAP INDEX SINGLE VALUE      | FT_IDX1 |       |       |       |       |       |
[\pre]
The above is the explain plan guys..Please assist.

Requesting guidance on how best to deal with removal of CreateElementSteps for tables when option to 'script validation for new constraints' is enabled during schema compare

I have a DeploymentPlanModifer subclass that is responsible for removing certain tables from a deployment plan under specific conditions. It is relatively trivial to find the
CreateElementSteps I need and subsequently remove them via
DeploymentPlanModifier.Remove(), but...
... if in my comparison I have enabled the 'Script validation for new constraints' option, the deployment plan will contain a
DeploymentScriptDomStep with a Batch containing AlterTableConstraintModificationStatements for tables with foreign key constraints. My problem starts here - there will be an orphaned
AlterTableConstraintModificationStatement for each of the tables that I removed. Obviously, execution of the generated script comes to a grinding halt when asking SQL Server to to alter a table that is never created.
I'm able to get around this by digging around in the aforementioned batches and removing the orphaned alter statements, but this seems really hacky, which makes me think I'm missing the proper way of dealing with this.
So... if anyone is aware of a more correct way of avoiding this problem, I would really appreciate finding out more about it.
Thanks in advance for any help. :-)

Hi Greg. Unfortunately there is not an easy solution here. Walking the deployment model, spotting potential issues and excluding them really is what you have as an option here. The alternative is to pre-process the dacpac to have it in the form you want,
but I'm not sure if this is an option in your case and it also has limitations.
Regards,
Kevin

Error message while creating Document in CV01n

Hi DMS Gurus,
I am creating Inspection Methods (Doc type Q05) in Easy Doc Mgmt System. While creating, the system is throwing error message: "Update error: table DMS_AUDITS function insert return code 4" This comes as a pop-up window in SAP Mail.
Request guidance on this issue. What mistake I am doing ? Do I have to change something in Config ? Please guide me.
Regards, KrishnaM

Hi,
Looks like: there is some problem with the Number Range settings here. I wanted External, unchecked Number range as desired by my client. The settings I made in DC10 are:
Doc type: Q05 (Inspn Method)
Number assignment: 4 (External number assignment without number range check only)
External Number Range: AAAAAAA0000001 to ZZZZZZZZZZ999999999 (I created it)
I am still getting error message with a pop-up as express SAP Mail.
Did anything go wrong in this setting ?
Rgds, Krishnam

Replication of Sales Order from SAP ECC to SAP CRM

Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh

1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

Sessionstore.js is missing

I have already posted the question "sessionstore.js cannot be found in 33.1.1" but the technical assistance offered is wrong (it was stated that the file is still on the system and it clearly is not). I am opening this second community question in hope of attracting someone that knows the answer....
For over a month a number of us have requested guidance on where the file sessionstore.js has gone. For my work, it is vital that I be able to archive and, on some FF crashes, restore that file. I am highly dependent on Group Tabs and all too often when FF crashes sessionstore.js is corrupted rendering my Group Tags worthless.
I opened the following dialog in the support form "sessionstore.js cannot be found in 33.1.1" but the only feedback from an"expert" there is the statement that that file still exists. I can ASSURE you that sessionstore.js does not exist on my boot drive.
If sessionstore.js is no longer the file to preserve & restore my Group Tabs, please identify the new file or new process that can be used to restore Group Tabs if they get corrupted..
Thanks,
Gerry

hello, this article describes how the newly implemented sessionrestore since firefox 33 is working: http://dutherenverseauborddelatable.wordpress.com/2014/06/26/firefox-the-browser-that-has-your-backup/

Defective Parts removal in Service Order

Hi,
Customer's defective product is being repaired. For every part consumed for repair, a faulty part is removed from the product. The faulty parts have to be returned to the customer and customer will pay for the Service Charges and Parts consumed. How do I take the faulty parts into stock?
Is it ok to enter the Part in the components tab page of the Service Order with a negative qty (Movement Type 262) so that it is automatically taken into stock after Service Confirmation?
Request suggestions.
Thanks.
Raj

Thanks Pete. I have a few more queries!!
u2022     In case I am taking the faulty Parts into a different Storage Location, do you still suggest I go for Split Valuation and customized MT?
u2022     How do I ensure all faulty parts go into stock (for every part consumed, there will be a faulty part removed)? Would you suggest I go ahead with the 'negative qty' approach?
u2022     Also, different opinion prevails with regards to valuation of these faulty parts. Should it be treated at zero value or at the same Moving Average Price bearing in mind that Parts are billed to customer? In my case, Service Charges for Repair and Parts billing have to be separate i.e., separate monthly invoicing
u2022     In case of Parts billing, would it be appropriate to go the SD way (create a Sales Order, Delivery, PGI, Billing document)? This way, I am ensuring stocks of faulty parts are also reduced in inventory.
As all above queries are of the same process, I have bundled them in one msg. Request guidance please.
Thanks again for your time.
Raj

Remove buttons in ALV grid display in ABAP Web Dynpro

Hi,
Sub: ALV grid-->Web Dynpro ABAP.
Request guidance to prevent display of the buttons "Microsoft Excel" and "Print Version" (which provide options to export the ALV grid output into an Excel format document).
Is there a way we could hide this from being displayed on the ALV grid in a Web dynpro ABAP component output?
Thanks very much.
Best Regards,
Adi

Hi Adithya,
really simple solution is to call cl_salv_wd_model_table_util=>if_salv_wd_table_util_stdfuncs=>set_all( abap_false ). This deactivates all ALV functionality.
For individual setting cl_salv_wd_config_table if_salv_wd_standard_functions~set_<x>_allowed.
- Michelle

Syncing contacts of my BB Torch 9800 to BB Curve 8520

Hi,
I recently got a BB Curve from the company I work for. I also own a BB Torch 9800 (my personal phone) which I use to use for official purpose. Now, I need help in transferring all my contacts to my BB Curve. Request guidance.
Thanks.

Hi and welcome to the forums!
KB05421 What is the Switch Device Wizard
"BlackBerry® Desktop Software can be used to switch from a previous BlackBerry® smartphone to a new BlackBerry smartphone . The BlackBerry smartphone data and settings from the previous BlackBerry smartphone , such as email messages, organizer data, and third-party applications that are compatible with the new BlackBerry smartphone, are imported to the new device. If there are any email accounts that are associated with a BlackBerry® Enterprise Server, these email settings are also imported to the new BlackBerry smartphone."
KB23677 How to switch devices using BlackBerry Desktop Software
Cool?
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

TELL ME ABOUT U PROJECT

HI,
1. I AM ATTNDING INTERVIEWS.IN MOST OF THE INTERVIEWS THEY R ASKING
TELL ME ABOUT U PROJECT.HOW TO ANSWER TO THIS QUESTOIN.
2.AND WHAT R U R ROLES AND RESPONSIBILITIES IN IMPLEMENTATION.
PLZ TELL ME ABOUT U PROJECTS AND HELP ME.
DONT WORRY I WILL ASSIGN FULL POINTS.
REGARDS
VENKAT.

HI,
THANKS FOR U QUICK RESPONSE.
U SAID TELL SOME UNIQUE REQUIREMENTS,PROBLEMS U FACED
N SOME REPORTING REQUIREMENTS.
BUT I DONT KNOW ANY THING.
TO TELL FOR ME SDN WILL NOT ALLOW U, U SAID.
GIVE U R PHONE NUMBER I WILL CALL U.
REGARDS
VENKAT.

220 jobs from world 2nd mobile adv company -blr

Dear All,
Are you looking for a job with world number two Mobile Advertising company then read on ...
We have 220 fresher and experienced recruitment for candidates with JAVA, .net, sql, big data, J2ME, Hadoop, NoSQL, Iphone and Andriod Technologies.
Exp level - Fresher - 10 years
location: Bangalore
Interview processing dates: 21st to 28th Nov 2012 , selected candidates will received online interview request or video interview process.
Register at www.hijobs.in at the earliest by Tuesday morning to participate in online interview test / video interview process with MNC client directly.
Forward the message to your friends who are looking for job.

See the following threads for more information about this kind of scam -
https://discussions.apple.com/message/21016890#21016890
https://discussions.apple.com/message/21013769#21013769
Do not send any information, and especially not banking information to these people. Obviously do not send them any money either.
If you do want to apply for jobs at Apple the place to start is here - http://www.apple.com/jobs/us/index.html
Best of luck.

Request guidance 2 attnd interviews - xi

Similar Messages

Maybe you are looking for