Requirement for barcode scanning

Hi All,
I need to add the value of scanned barcode in my Ztable.
For this Requirement -->
I think --
First I need to have a module pool program with i/p field (say about 64 char i/p field) for barcode value.
Now what next -->
How the scanner (which attached to USB port) will display the barcode value in i/p field of my program??
What I need to do for this???

Hi,
From Barcode reader - Wikipedia, the free encyclopedia
USB
Later barcode readers began to use USB connectors rather than the keyboard port, as this became a more convenient hardware option. To retain the easy integration with existing programs, a device driver called a "software wedge" could be used, to emulate the keyboard-impersonating behavior of the old "keyboard wedge" hardware.
Regards.

Similar Messages

Are 3 IPs required for a SCAN in 11.2?

I've read the docs on setting up SCAN for 11.2. Oracle recommends 3 IPs but doesn't say what may happen if you only use one. We have a limited number of IPs and our admin guys want us to use only one. If we do use only 1 IP for the SCAN, what sort of trouble might this cause? Is there anything else we should do if we use only 1 IP?

Hi,
Rather than have the SCAN configured with new/different IPs, wouldn't it work just as well if it was configured with the VIPs or pubic IPs of the nodes in the cluster?Is it mandatory to use SCAN?
No, but it's highly recommended to use SCAN unless there's strong business reason preventing it from being used.
Is it supported to remove SCAN?
SCAN is an elementary part of 11gR2 Grid Infrastructure, it's not supported to remove SCAN. So, you must use an IP at least.
SCAN IP is a new "layer" network (oracle) with high availability that allows you to change the characteristics of your cluster (i.e add/remove nodes) without the need to make configuration changes in their clients "Grid concept".
The IP SCAN and VIP have different goals, therefore working together.
The VIP IP provides high availability at the level of the Cluster.
The SCAN IP provides high availability at the level of the Clients.
No matter if we are adding or removing nodes in a cluster or if the nodes are active or inactive, SCAN IP is always available for clients (Managing Connections-Failover) since one node of cluster is active.
Why not use VIP or Public ?
Because for us to have the concept of GRID we must configure the feature only one time and it will self manage and make cluster transparent to yours clients.
If you add or remove an NODE it's require to modify the connections of yours all clients (VIP/PUBLIC IP) you broke the concept of GRID. (This makes a big difference when you have many clients i.e.: Over 20 clients.)
If we remove or add node we must configure the clients to use/or not this node. Using SCAN he do this automatically.
How the things works?
You configure only one host on your client (e.g host-scan). When the client requests a connection, Oracle Client 11gR2 searching for IPs available for this host-scan. So, he try connect on cluster using one of IPs avaliable.
The SCAN Listener will receive this connection and re-direct to the node (Host Listener) with less workload from this point the the connection is established using Virtua IP (VIP).
I can say : SCAN is the connection manager with high availability.
Why 3 SCAN IP?
Sebastian answered this very well.
Re: Are 3 IPs required for a SCAN in 11.2?
This is the purpose of SCAN IP. I hope you understand.
Regards,
Levi Pereira
Edited by: Levi Pereira on Apr 29, 2011 10:10 PM

Identifying goods movements which have been barcode scanned

Hi,
We are developing the use of ITS for barcode scanning in the warehouse, using Symbol 9090 HHDs.
The transactions used are MIGO-like:- MB01, MB11.
Goods are issued to PM orders, goods are receipted.
How can we identify and report in SAP which movements have been performed using the handheld device, and which have been performed using manual input directly in the SAP gui?
Thanks.

Hi..
I think mb51 is the apt report...filter by movement type 101 (G.R.N) and from the list filter the materials and vendor...a bit lengthy process but will work.
Edamanayil

Kernel requirements for HPLIP (not working) [SOLVED]

My printer (connected to the network through my router with a static ip address) used to work fine with HPLIP and CUPS. When I last tested, I was (and am) using a custom-compiled zen kernel; the relevant modules that I compiled (separately, not into the kernel) are plip, ppdev, and parport. I am guessing that it is a combination of package upgrades and my custom kernel that is causing the problem below:
My printer is detected by CUPS, and I can see it on localhost:631. When I send jobs to it, it begins "processing" them, then hangs on a (to-print) page and I see the message
/usr/lib/cups/backend/hp failed
I deleted the printer from CUPS and re-added using
sudo hp-setup
The process goes just fine, with hp-setup only throwing a warning about how dbus must be running for the PC to fax (with which I am not concerned).
When I run hp-testpage, I get this:
redscare:~> hp-testpage
warning: python-dbus not installed.
HP Linux Imaging and Printing System (ver. 3.9.12)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using printer: Officejet_6500_E709n
warning: Qt/PyQt 4 initialization failed.
error: hp-testpage -u/--gui requires Qt4 GUI support. Entering interactive mode.
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n <-- This line is important?
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Thanks in advance for your help
Last edited by RedScare (2010-01-08 01:27:28)

I didn't have python-dbus installed, which I did. hp-check -t still throws some errors, but I don't see how they are related to the printer not working (more scanning-related issues). Here's the new output of hp-check -t:
Initializing. Please wait... \
| SYSTEM INFO |
Basic system information:
Linux redscare 2.6.32-ZEN #1 ZEN SMP PREEMPT Tue Jan 5 20:30:35 EST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!
Checking for CUPS... Status: scheduler is running Version: 1.4.2
error_log is set to level: warn
Checking for dbus/python-dbus... dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = BlackPrinter
device_uri = hp:/net/Officejet_6500_E709n?zc=PRINTER
[installation]
version = 3.9.8.36
date_time = 10/15/09 23:29:55
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
BlackPrinter
Type: Printer
Device URI: hp:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinter.ppd
PPD Description: HP Officejet 6500 e709n, hpcups 3.9.12 Printer status: printer BlackPrinter is idle. enabled since Wed 06 Jan 2010 04:26:39 PM EST
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
BlackPrinterFax
Type: Fax
Device URI: hpfax:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinterFax.ppd
PPD Description: HP Fax hpcups Printer status: printer BlackPrinterFax is idle. enabled since Wed 06 Jan 2010 04:26:57 PM EST
error: Unable to communicate with device (code=12): hpfax:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
error: '/etc/sane.d/dll.conf' not found. Is SANE installed?
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
|
| USER GROUPS |
root bin daemon sys adm disk wheel log
| SUMMARY |
error: 13 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.

The HP software required for Scan to Computer could not be located on this computer.

No scanning from the HP front panel. Get this from the HP utilities "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." I've downloaded, deleted and downloaded the drivers and i tried to let my mac get drivers from the printer. I have to go to the web do scan my flat bed.

Hello @wfreker,
Welcome back to the HP Support Forums! I understand you are not able to use the Scan to Computer feature with your HP Officejet 8625. Please follow the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

What device i could use to plug to ipad for credit card/barcode scanning purpose.

What device i could use to plug to ipad for credit card/barcode scanning purpose?

For credit card reading go to Square you can find them at https://squareup.com/
For bar code reading download the RedLaser app from the App store on your iPad.

SAP WM 6.1 : Barcode Scanning Time&Date stamp capture

Hi Experts,
Our client have new requirement: we enable the Barcode scanning functionality for Functional Location in Notification screen, when user scan the functional location we need capture the time & date stamp also. I am able to capture the functional location but not able to capture the date&time stamp of barcode scanning.
can any body guide me how to capture the date&time stamp during scanning.
Thanks
Chigari

Chigari,
How you accomplish this will depend on where exactly you are scanning.
If you are on a transaction screen you can simply add an additional property to the transaction to store the current date and time.
If you are scanning to a list screen then you can look at adding / updating the single match action and no match actions to add in a transaction to store the timestamp.
--Bill

Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

ISSUE: "This domain controller must register a DNS SRV resource record, which is required for replication to function correctly"

so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Error:
Missing SRV record at DNS server 192.168.22.4:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
Title:
This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
Severity:
Error
Date:
7/3/2014 11:24:48 AM
Category:
Configuration
Issue:
The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
Impact:
Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
Resolution:
Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.

Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand. After that's done, on each DC run (and you can use a PowerShell window to run this):
Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
ipconfig /registerdns
net stop netlogon
net start netlogon
Then re-run the dcdiag /e /c /v.
Post your results, please.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine CM-DC1-NY01, is a Directory Server.
Home Server = CM-DC1-NY01
* Connecting to directory service on server CM-DC1-NY01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
DSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 3 DC(s). Testing 3 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC1-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC3-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC4-NY01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Advertising
The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC1-NY01 is advertising as an LDAP server
The DC CM-DC1-NY01 is advertising as having a writeable directory
The DC CM-DC1-NY01 is advertising as a Key Distribution Center
The DC CM-DC1-NY01 is advertising as a time server
The DS CM-DC1-NY01 is advertising as a GC.
......................... CM-DC1-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
[CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC1-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC1-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC1-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC1-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
......................... CM-DC1-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC1-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC1-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC1-NY01\netlogon
Verified share \\CM-DC1-NY01\sysvol
......................... CM-DC1-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC1-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC1-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC1-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC1-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 4609 to 5108
* rIDPreviousAllocationPool is 4609 to 5108
* rIDNextRID: 4629
......................... CM-DC1-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC1-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000002F
Time Generated: 07/08/2014 13:19:14
Event String:
Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
ew peer with this DNS name. The error was: The peer is unreachable.
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC1-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC1-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC1-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Advertising
The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC3-NY01 is advertising as an LDAP server
The DC CM-DC3-NY01 is advertising as having a writeable directory
The DC CM-DC3-NY01 is advertising as a Key Distribution Center
The DC CM-DC3-NY01 is advertising as a time server
The DS CM-DC3-NY01 is advertising as a GC.
......................... CM-DC3-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC3-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC3-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC3-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC3-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
......................... CM-DC3-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC3-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC3-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC3-NY01\netlogon
Verified share \\CM-DC3-NY01\sysvol
......................... CM-DC3-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC3-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC3-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC3-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC3-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15109 to 15608
* rIDPreviousAllocationPool is 15109 to 15608
* rIDNextRID: 15110
......................... CM-DC3-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC3-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC3-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC3-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC3-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Advertising
The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC4-NY01 is advertising as an LDAP server
The DC CM-DC4-NY01 is advertising as having a writeable directory
The DC CM-DC4-NY01 is advertising as a Key Distribution Center
The DC CM-DC4-NY01 is advertising as a time server
The DS CM-DC4-NY01 is advertising as a GC.
......................... CM-DC4-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC4-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC4-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC4-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC4-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
......................... CM-DC4-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC4-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC4-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC4-NY01\netlogon
Verified share \\CM-DC4-NY01\sysvol
......................... CM-DC4-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC4-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC4-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC4-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC4-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15609 to 16108
* rIDPreviousAllocationPool is 15609 to 16108
* rIDNextRID: 15609
......................... CM-DC4-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC4-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC4-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC4-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC4-NY01 passed test VerifyReplicas

Barcode scan on WPF agentry client

Hello to all,
I use a barcode scan field type on window screen for WPF agentry client. When I try on our tablet device, user input is not enable but the barcode scan does not work fine. It seems that the field does not recognize the scanning.
In particular we need a input field that receives in input only a scanning and no user input from keyboard.
What kind of agentry field can I use ?
Can I use barcode scan type on WPF agentry client ? There are some restrictions ?
Thanks in advance.
Regards.
Paolo

Hi,
you may want to have a look at the new OpenScan API. To my knowledge the WPF Client does not support barcode scanners, NFC scanners etc. out of the box.
Regards, Daniel

Update "Is not required" when it is required for some workstations

Hi all - Question in regards to how SCCM/WSUS determines if a patch is applicable to a machine. Some background info. We have 168 Dell Venue tablets running Windows 8, not 8.1 (that's another story). All were imaged from SCCM with
the same image so they should all be identical in regards to software and patch levels. I'm trying to deploy KB2756872. Of the 168 machines 150 are showing as "Not Required" for the patch, 18 are showing as "Required".
I've successfully manually installed the .msu on a couple of the "Not Required" machines with no problem. Running the "My Dell" utility shows the patch as required on the machine so why does SCCM think it is not?
Questions is why are most showing as "Not Required" when the patch is applicable? Is there a way to figure out what exactly is being evaluated to determine whether a patch is or is not required?
Thanks as always,
Rick

The ConfigMgr client agent just controls the Windows Update Client agent (which performs the scan against the SUP's catalog). Any chance that the update is classified as an optional one?
Torsten Meringer | http://www.mssccmfaq.de

Does not meet the system requirement for installing BB App World

I bought a Curve 8520 in Singapore yesterday. When i tried to download App world into this phone, it says "my phone does not meet the system requirement for the software". does it refer to hardware specification or the BB O/s version on the phone. How can fix it because being able to use App world is one of the purposes that i buy a BB.
Also, How about MS Live Messenger , facebook ? Do I need to install them seperately through App World?
Please help!

Hi there!
Please see these links for reference:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
http://www.blackberry.com/app_includes/devicesoftware/appworld/appworld_availability_en.html
A key component in accessing AppWorld is your carrier -- if they are not delivering it, then you can't get it. If you don't have an adequate plan from them that incudes it, then you can't get it. Hence, if you meet the hardware requirements AND it is available in your country, then you need to contact your carrier to find out how you can get it via their network.
All that said, AppWorld is merely a storefront, vending apps developed by others...there are many other storefronts available that don't have the same restrictions.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe design question for barcodes and including PDFs

Hi all,
I am new to using Adobe LC ES 8.2. I have been reading this forum and it has been very helpful. We have certainrigid requirements for our application that is making it difficult to come up with a clean solution. I am hoping this forum will be able to answer some of my questions:
Use case: Our application needs to mail correspondence to users (printed PDFs not fillable forms). We plan to use Adobe LC ES Designer to design all the forms and Assembler Service to assemble the documents together. The plan is to merge the templates with XML business data dynamically and then assemble them. When the documents are assembled together, documents to be assembled include Cover Pages Templates, Notice Templates, Attachments (could be templates or static PDFs) and decisions that will be converted into PDF from an RTF document using Adobe Professional 8. The user creates the document in RTF and convert it into PDF using Adobe Acrobat Professional and store it for assembly process. Our Print Shop requires the entire assembled mailing to have bar codes on each of the pages with the following information:
1 D 3of9 barcode - JOB ID (can be sent dynamically) + PIECE ID (number of mailing) + SHEET ID (page number with in the PIECE ID - front and back of the page get the same number)
Following are the questions we have:
1. What ways are available to apply the bar code to the assembled document as one piece of information in the bar code is the SHEET ID for the entire mailing? I would know the total number of pages only after assembly.
2. If there is a way to manipulate the barcode information after assembly, I am not sure how we can handle bar coding the Decision PDFs that will be converted from RTF using Adobe Professional 8.
Please advice.
Thanks.

Thank you. So, using Form Services we can manipulate the document (barcode object) after assembly.This is great.I will look into this. When we spoke to Adobe, they wanted us to complete all merge prior to assembly and said we cannot manipulate the document after assembly.
How would I handle a barcode for a PDF that has been converted into PDF from a RTF document? My concern is that even if the RTF has a barcode, will it be a format that can be manipulated after it is converted into PDF by the user and submitted to the assembly process?
One of my ideas is to maybe convert this PDF into images and include it in the XML data as base64 images and merge it with an Adobe Form template having image fields. This is not a clean approach and I am very concerned about performance issues with the size of the data XML.
The other thing I am reading up about is "Underlaying pages" - http://livedocs.adobe.com/livecycle/8.2/ddxRef/wwhelp/wwhimpl/js/html/wwhelp.htm?href=0012 71.html#1548394&accessible=true
Any ideas?
Thank you so much.

Software requirements for PIP 3.1

Hello all,
Please provide me the software requirements for PIP 3.1. I am installing Agile-EBS PIP.
List is as given below
SOA Version + Patch set:
DB Version:
OSR Version( Oracle Service registry)
Any additional patches( if required Eg: MLR8).
Please help me.
Thanks,
Aravind

Supported Platforms guide will list all of th relevand supported softwares.
https://websmp207.sap-ag.de/~sapdownload/011000358700000973582009E/
We do support usage of Adobe 7,8 , we don't care about DirectX version, not AntiVirus (worst case you'll need to exclude BO directories from scans).

Realistic system requirements for Design Premium on MAC

Hi,
Can anyone give me some realistic system requirements for CS4 Design Premium? I am just about ripping my hair out with having to reboot several times a day because i'm running out of memory on my PC and am thinking about switching to MAC.
I am currently running a PC well above the recommended specs for Design Premium CS4 and it looks as though I will have to upgrade anyway. Designer friends tell me their MACs never require rebooting (but again i guess it depends on the MAC specs).
My questions are:
* If i buy a MAC, what would I need to buy to comfortably run Design Premium CS4 without any crashes?
* reading some of the other discussion threads in this forum it seems some products don't work/aren't supported by MAC? Of the Design Premium products which ones would I have issues with?
* Does anyone know what the deal is with switching the software licensing from Windows to Mac? (I heard you can only switch if you are upgrading which would mean I would have to wait until CS5 is released.)
Advice would be appreciated!!
Cheers,
Karen

Thanks Michael,
I do use a few of the programs at once: Bridge + Photoshop + Illustrator + Indesign (actually, have learnt cannot run all of these at once but would love to!);
Dreamweaver + Fireworks (Fireworks constantly causes me headaches where files become locked and cannot be saved - all due to shortage of memory)
Usually run virus software - full scan weekly, so am pretty sure my system is clean.
Great idea about disabling Virus software - will ensure I unplug from modem first!! I will give that a go.
Cheers,
Karen

Requirement for barcode scanning

Similar Messages

Maybe you are looking for