Researcher to release Web-based Android attack

An exploit was release today:
http://www.exploit-db.com/exploits/15423
For more information this article:
http://www.computerworld.com/s/article/9195058/Researcher_to_release_Web_based_Android_attack?taxonomyId=17&pageNumber=1
This exploit affect Android 2.1 and 2.0. Sure would be nice to have that Froyo update.

thanks guys, that isn't quite what i thought it would be.... i really wish that apple would release something cool for a change like native apps or game or something that doesn't require internet access. thanks though.

Similar Messages

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

WRT54G V6.0 Web Based Interface Issue

I'm trying to setup a WRT54G. I ran the SetupWizard which didn't work.
I can access the Web Based Interface at 192.168.1.1 , but when it appears (after putting in the admin password), the page doesn't properly load. The colors and some text comes up, but all of the tabs, buttons and links are missing (including the Save Settings button). I can't get to Administration page to restore the factory defaults or upgrade the firmware.
I've tried the pressing the reset button for 30 seconds about 100 times so far, and nothing has worked. I've tried this on 3 different computers, and my other 2 WRT54G's run properly on all of these computers.
I bought the router about 2 years ago and I just opened the box today.
What fixes are available?
Thanks in advance.
Solved!
Go to Solution.

If you are not able to see any Tab on your router setup page, If you have any Firewall or Antivirus installed on your computer you may disable it and then try to Login to your Router Setup page and check if you are able to see any Tabs on Routers GUI. If still not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable.
If you still face the same problem, Connect your other computer to the Router and try to access the router setup page and check if you are able to see any tabs on the router setup page. If stil the same problem on the 2nd computer then you need to Upgrade the firmware of your Router using TFTP tool.
First you need to Download 1.67 MB the Latest Firmware of your router.
TFTP tool which you can Download 44.3 KB (It will be named as BEFW11S4-v2_SetupWizard)
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now Check if you are able to Login to your Routers GUI and able to see the Tabs on it.

How can I video chat with someone who uses web based yahoo?

Not long ago I purchased my first Mac (New MacBook Pro 2.53GHZ); last Summer I also purchased a MacBook Pro for my daughter. Everything works great (like driving a formula one Porsche after grappling with a battered pick-up truck (meaning Windows) for many decades; cannot imagine ever going back. But, there is one issue that I have not been able to solve and for which I would greatly appreciate any suggestions or advice. I am familiar with ichat and with AIM (my daughter uses it all the time). However, the vast majority of people with whom I communicate via IM live in parts of the world where very few people have even a computer at home much less residential internet access. As a result, near all of the folks I would be chatting with have to use public computers (internet cafes, libraries, etc) and obviously they cannot install AIM or anything else on those public computers. About 90% of them use the web based yahoo messenger which can be accessed from any computer with an internet connection (most of the rest use MSN). My question is this: I know how to do video chat in ichat but ichat does not support yahoo. How can I do video chat with someone who is using web based yahoo on a public computer that has a USB web cam? I was able to do this on my old PC which had a plug in web cam but do not know how it might work on a Mac. Should I install yahoo messenger on my MacBook Pro and will that work for me?. I know about some other Mac compatible chat clients such as Admiun but as far as I can tell none of them support video chat or in some cases yahoo. Perhaps I am overlooking something. I would be very grateful for any suggestions or advice in this matter. Thanks to anyone who reads this post and has any helpful info.

Zurich,
I don't think the web-based Yahoo Messenger supports video, so nothing you can do with that.
http://messenger.yahoo.com/features/
I think there are Mac compatible MSN clients that will do video, (i.e. aMSN) Also, Microsoft plans on releasing an updated version of Messenger for Mac soon.
http://www.officeformac.com/blog/An-Update-on-Messenger-for-Mac
GoogleTalk does have a browser based video chat, but your friends would need to install a browser plug-in. (which I would assume that can't do either)
The best option is Skype, but also requires an install on their end (I would think that the internet cafes would/should have this available)
Good Luck,
Double_A

SSRS web based report viewer control rendering issues - text getting clipped chopped off

Hi,
I am using web based SSRS report viewer control to display SSRS reports in browsers like Chrome, FF, IE, Safari etc. My issue is some text is getting chopped off (clipped) in all cells of some reports. I investigated on my end by analyzing generated HTML
and I could see a problem in the HTML that report viewer control is generating. But I am afraid to apply any HTML or Javascript hacks at the moment considering we have hundreds of reports.
You can see in above image how text got chopped off. The problem in HTML (given below) is the text has been wrapped in a div tag with a fixed height. If I remove the height and also padding on parent TD, the text appears properly.
<td class="A23dfe7c5f99245f2a0db522a22a6035597c" style="HEIGHT:5.00mm;background-color:#d3d3d3;"><div style="HEIGHT:3.24mm;overflow:hidden;"><table lang="en-US" cellspacing="0"
cellpadding="0" border="0" class="Pd9776e5f7eaf4df696265b8b49d1da39_1_r17"><tbody><tr><td class="A23dfe7c5f99245f2a0db522a22a6035597" style="word-wrap:break-word;white-space:pre-wrap;">MyType11</td></tr></tbody></table></div></td>
Please let me know if you have faced a similar scenario before.
Here is link to stackoverflow thread -
Stackoverflow thread
Regards
Murtaza

Hi Murtaza,
According to your description, when you display the report with Report Viewer control, the data within the text is cutoff.
Based on my research, the issue could cause by that Arial Unicode MS font hasn’t been installed on the server where Reporting Services run. Besides, when we use ReportViewer control to render report, we’d better set
AsyncRendering="true" in the Report Viewer control. Also please run the IE with compatibility mode. For more information, please refer to similar threads below:
Data in column getting cut-off in report viewer control
SSRS Rendering Issues
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

WRT310N No Way To Setup and Configure Router. CD Setup No, Web Based Setup No

Purchased New WTR310N yesterday. LESA does not run from CD. Web based Setup Page Will Not Load. Did two 2 hr Remote Setup sessions so far with Linksys Techs in Phillipines and India. After 1st Tech was done, nothing would connect to router. Tech tried to setup our 4 PCs by setting up one as a server and using ICS to setup the rest. Tech disabled TTP, DHCP, ete everything that works as a home network. I think Tech also setup a password and user name on Router without telling me. I had to spend 2 hrs using Vista and XP Wizards to setup a router network, both wired and wireless. Since Router is not configured yet can only access unsecured wireless networks. But 2 wireless printers do not work yet. Tech today was excellent in India. She reinstalled my Linksys USB Wireless Adapter that I use to print with. Still not printing, and green light not coming on, on USB Adapter. Tech managed to upgrade Router Firmware, but could never get web based router setup to load. Got the password and user name box to show up once, but admin and blank username does not work. My XBox 360 installed in 15 seconds and is fast so Router working fine. So need help with getting Linksys USB Wireless Adapters to access wireless printers and somehow get router admin pages to load so I can turn on WEP and type in our WEP Code. Last router was Linksys 54G, all worked fine for years, then quit working so got new router. Any ideas before I try calling Tech Support again, thanks.

As you want to make the network secured but the admin password is not working....You have to reset the router and re-configutre it again...
Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Web-based utility will not load on new wet54g ethernet bridge

I just got a WET54g ethernet bridge to connect my bluray player to my existing network (wrt54gs router). I cannot get the setup cd to recognize the bridge connected to the laptop or the router. I thought that it would be no problem, just use web-based set-up. When attempting to access 192.168.1.226 I have to enter the password three times and then a blank page is loaded. Chat support ended up getting disconnected, so no luck there. Supposedly some of the steps chat wallked me through updated the firmware through ftp download, but I feel like nothing was done since you can't access the set-up page. Any suggestions are welcome. I'm running vista if that helps.

Start it from Scratch...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your WET54G(ethernet bridge), wait for 30 seconds and re-connect the power cable...Now re-configure your WET54G(ethernet bridge)...Follow the link here to re-configure the WET54G(ethernet bridge)...Also under the configuration type select Static IP Address : For IP Address enter : 192.168.1.226, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 and save the settings...
After doing these you can unplug the Ethernet Bridge from the router and power cycle your router and the ethernet bridge both...Connect your ethernet bridge to your bluray player and test for active connection...

Web based setup page is blank

wrt54g wireless router
when i go to 192.168.1.1 and log in as admin,(all fine to this point), BUT THEN, when the web based page comes up, no words on pge, can not make selections. PLEASE HELP, what do i do. have tried using start up disk but no help.

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Need access the E1000's web-based setup page.

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
Solved!
Go to Solution.

Yes, there is. You'll have to reset the router back to defaults, which will reset the password back to the default password for your router. Unfortunately , you'll also have to reconfigure the settings, since all settings go back to factory default. Just hold press the recessed "reset" button for your router for about 30 seconds, then release it. After the router has re-initialized itself, you'll be able to log in to the web GUI again with the default password.

ITunes Web-Based or iTunes Match?

I'm sorry if this is not in the correct place. I searched for about an hour and did not find anything.
I have a really old ipod classic that i'm wanting to replace. My main issue in deciding between itunes and something like Amazon, is while I'm an Android user, I think music is best on an ipod, but I do not want to have to rely on iTunes.
We do not load iTunes on our workstations, and I have a seven year old workstation in our IT closet hanging onto its last breath just to run itunes. So here are my questions:
1) Will the new itunes that i'm hearing about be web-based at all? I'm wanting to download music from my ipad or ipod from the store, and just have it available in itunes. But i DO NOT want to have to buy music or upload it through iTunes?
2) Will iTunes Match in a way fix this? If i purchase iTunes match, can I now control all my music through match, or will i still have to have iTunes?
3) I'm wanting a wifi ipod, but I really don't care for the ipod touch, mainly because it's like the iphone without the phone part. Are any other ipods wifi where I could purchase music through a wifi connect?
Please help. I'd love to stay with ipods, but like many people, i'm not wanting to hang onto iTunes, and i'd rather manage my music in the cloud in a web-based itunes or perhaps if itunes match could do this.
thanks in advance for your help!!
Jason

I appreciate your professional and kind response, but alot of people feel that way. Especially the millions of people like me that like some of apples products, but feel that other devices might meet their needs better, or they might be in a work environment where PC or Android is more the norm.
Most other software is available web-based and I would have just thought this would have been a natural progression.
iTunes is a very resource heavy product, and people that enjoy the ipod and the benefits of iTunes, shouldn't be locked into having to download the huge program.
Thanks again for your response.

Web based PDF Doc question - not sure how to describe

My manager has asked that I research a way to change a web based pdf file to allow fellow co-workers to either download it has a whole, or just sections of it. I've tried looked into bookmarks and portfolio, but it just doesn't seem to do what he requires.

You should have a Binder for your complete PDF and separate section files individually constructed for each chapter or section
that should be available as a portion of the whole. So, in essence you would create individual PDF's first then collect
them into a single PDF Binder (not a Portfolio)

Web-Based Setup Username ??

I am able to log onto the web-based router setup page (192.168.1.1) and enter the password (I have changed the password from default)
but the username is blank ??
why is this, and is there a way to change it ?
SHOULD i change it ? what about for remote access
wrts54gs v1.1
thanks
Message Edited by Sethboy on 09-29-2007 05:53 PM

I could not find a WRTS54GS User Guide. I assume you mean a WRT54GS.
Most Linksys routers, including the WRT54GS, do not use a "user name". You should leave this blank.
If you plan to access your router remotely, i.e. from across the Internet, then you need to use a very secure login password on your router. If you use a simple password, such as a dictionary word, your router will be open to a brute force attack.
For this type of setup, I usually recommend a password of at least 24 random characters, including captial letters, small letters, and digits. Do not use any blanks in the password.
Message Edited by toomanydonuts on 09-30-2007 03:48 AM

Researcher to release Web-based Android attack

Similar Messages

Maybe you are looking for