Reset the html:messages during the click of clear button ???
Hi,
When i click the clear button i need to clear the <html:messages>
that has been populated below the form??? How to do this???
Please provide a solution for this???
Thanks,
JavaCrazyLover
No replies as yet....
Similar Messages
-
How to display the error message during the web dynpro application runtime
hi,
I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
But when i do the same on server-2,there just show something like:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AMThe Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again. -
I am connected via airport extreme wifi, should I be hard wired?
If you try to run Software Updates, is it able to connect to the update servers? Are you managing your Software Update server?
-
Send email including the data field into the html message body
Hi all,
I would like to send an email to each recipient once only, and including a data field into the html body message. I am not sure how to achive that with my current stored procedure.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder] Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max)
declare mycursor cursor FAST_FORWARD for
SELECT dbo.HumersStaffExtension.email
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email,
dbo.HumersStaffExtension.res_id
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'CallsManagement',
@recipients = @email ,
@body_format = 'HTML',
@subject = 'Personal Calls Reminder',
@body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>
<table style="width: 800px">
<tr>
<td>Dear,<br />
<br />
Please review your phone bills and submit your personal calls using the following link:<br />
<a href="http://companyxyz/personalcalls/">Personal Calls</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>Kindly be informed that the deadline to process new bills is on the
<span class="auto-style1">15th of each month</span>.</strong></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td>For assistance, please contact <a href="mailto:[email protected]">[email protected]</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
FETCH NEXT FROM mycursor
INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Changing the query to the following:
SELECT TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
dbo.Calls_Mobile_Header.ExtractDate
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
ORDER BY dbo.HumersStaffExtension.email
Will provide me with the following results:
email ExtractDate
[email protected]
July-2014
[email protected]
August-2014
[email protected]
July-2014
[email protected]
August-2014
Is it possible to send email to [email protected] once only including in the html message body the ExtractDate field results for July-2014 and August-2014?
I appreciate any assist on the issue.
Thank you in advance.Refer the below code highlighted in bold.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder] Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max),@date datetime
declare @temp table (email varchar(50), extractDate datetime)
insert into @temp
SELECT TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
dbo.Calls_Mobile_Header.ExtractDate
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
ORDER BY dbo.HumersStaffExtension.email
declare mycursor cursor FAST_FORWARD for SELECT DISTINCT email from @temp
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE @date nvarchar(200)
SELECT @date=Stuff((SELECT ',' + [extractDate]
FROM @temp where email = @email
FOR xml path('')), 1, 1, '')
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'CallsManagement',
@recipients = @email ,
@body_format = 'HTML',
@subject = 'Personal Calls Reminder',
@body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>Extract Date : ' + @date + '</div>
<div>
<table style="width: 800px">
<tr>
<td>Dear,<br />
<br />
Please review your phone bills and submit your personal calls using the following link:<br />
<a href="Personal">http://companyxyz/personalcalls/">Personal Calls</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>Kindly be informed that the deadline to process new bills is on the
<span class="auto-style1">15th of each month</span>.</strong></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td>For assistance, please contact <a href="[email protected]:[email protected]">[email protected]</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
FETCH NEXT FROM mycursor
INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Regards, RSingh -
Itunes will not open on my computer. It was working just fine. I get an error message "the program can't start because MSVCR80.ddl is missing from your computer. Try reinstalling to fix program." I have tried this. I then get the error message "Error 7(windows error 126)"
I also get the following message during the download of itunes"Apple mobile device failed to start. verify you have suffcient privileges to start system services.'Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99642) -
I just installed itunes on a Windows 7 PC. When I click on the Itunes icon the following message appears -
The Itunes Library.itl file cannot be found or created. The default location for this file is in the "Itunes" folder in the "Music" folder.
I have checked and there is a file named Library.itl in the "Music" folder. I'm not sure where to go from here so any help would be greatly appreciated.See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?
I am having an issue as well, I think it is ongoing for everyone who is trying to update.
-
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition. -
When I click on a link in an email using gmail in the Mozilla brower, I get the following message at the top of the screen:
"Firefox prevented this page from automatically redirecting to another page...[Allow].
How can I stop this?# Press Alt+T
# Select Options
# Select Advanced Panel
# Select General Tab
# You will see option "Warn me when websites try to redirect or reload page"
# Uncheck it as given in the screenshot.
<img src=http://dl.dropbox.com/u/7456129/Firefox/advancedgeneraltab.jpg width=600px height=600px>
''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.'' -
How to aviod L3 008 message during the TO creation (Technically)
Hi ,
How to skip the L3 008 error message during the TO cration , we have picking strategy user exit is active and we want to skip the L3 008 error message for specific logic in user exit .
We had found FM RV_DELIVERY_PICK_VIEW is helpful but how to implement at quants level or LIPS table ? .
Please suggest .
Thanks ,
RaghuAre you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option
-
Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.
Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams -
How can I reset the age entered during the first configuration set up?
how can i reset the age entered during the first configuration of a brand new i pod touch. The age is incorrect and does not allow me to open a new i-tunes at a later configuration step. Error meesage: you are not old enough to open a new i-tunes account.
Thanks for support to solve the problem.- Terminate the setup for obtain the account and then try again with same email address.
- Next would be to contact iTunes.
Contact iTunes -
WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?
Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR -
Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5
Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
-1: 'startsap.exe' returned an error
See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid SID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 150
intno 20050900
make: multithreaded, ASCII, optimized
pid 5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c 1245]
shared lib "dw_xml.dll" version 150 successfully loaded
shared lib "dw_xtc.dll" version 150 successfully loaded
shared lib "dw_stl.dll" version 150 successfully loaded
shared lib "dw_gui.dll" version 150 successfully loaded
shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01 <
DpShMCreate: sizeof(wp_adm) 22968 (1044)
DpShMCreate: sizeof(tm_adm) 3642120 (18120)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c 11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Apr 02 11:53:30 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6916 Ended no 1 0 0
1 DIA 7724 Ended no 1 0 0
2 DIA 6044 Ended no 1 0 0
3 DIA 4300 Ended no 1 0 0
4 DIA 6992 Ended no 1 0 0
5 DIA 2412 Ended no 1 0 0
6 DIA 432 Ended no 1 0 0
7 DIA 8168 Ended no 1 0 0
8 DIA 5420 Ended no 1 0 0
9 DIA 9712 Ended no 1 0 0
10 UPD 4320 Ended no 1 0 0
11 ENQ 3476 Ended no 1 0 0
12 BTC 2676 Ended no 1 0 0
13 BTC 6816 Ended no 1 0 0
14 BTC 9636 Ended no 1 0 0
15 BTC 8356 Ended no 1 0 0
16 BTC 7004 Ended no 1 0 0
17 BTC 7284 Ended no 1 0 0
18 BTC 10048 Ended no 1 0 0
19 BTC 4560 Ended no 1 0 0
20 BTC 4196 Ended no 1 0 0
21 SPO 4268 Ended no 1 0 0
Dispatcher Queue Statistics Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Apr 02 11:53:30 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01 <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c 10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
VadiHi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi -
How can I disable the behance pics during the startup of my CC 2014 programmes?
When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
is there a way to disable them?
thanks a lot
alexhi sarah,
thanks for getting back to me.
i mean these images:
when the programmes are starting up…
thanks a lot for your help
alex
Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
How can I disable the behance pics during the startup of my CC 2014 programmes?
created by SarahBehance1 in Behance - View the full discussion
HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
Talk to you soon, thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Behance by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Alex an der Haas
Art Direction
// Die Goldkinder
// Ausdenken und Machen.
// Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
// Tel: +43 (0) 1 595.37.07
// Mob: +43 (0) 699.816.366.31
// http://www.diegoldkinder.at
Maybe you are looking for
-
Vital Program no longer works after updating JAVA SE - Need help fast!
System Info: Window Vista Home Premium (Service Pak 2) Intel Core 2 CPU T5200 @1.60 GHz RAM 2 GB 32 bit OS JAVA 6 SE Update 18 (build 1.6.0_18_b07) I am just an old guy, not a techie, with diabetes who uses Bayer
-
Applying all update\patches during 'install software update' step
Hi, I have created software update group (around 10 updates\patches) and deploy it to 'unknown computers' collection. Ts 'Install software update' step scans through and only installs 2 updates out of 10. I have kept deploy property as 'required' whi
-
Programs for converting avi to mp4/h.264
As the title says. I'm looking for a really good program for this, i want really good video quality, and it doesn't matter if the program is for free or if u need to buy it. I'm a windows user.
-
Print action's default printer
Hi, I've configured a print action to trigger a custom smartform within CRMD_ORDER. My print action uses processing class CL_DOC_PROCESSING_CRM_ORDER, and method CRM_SRVORDER_EXEC_SMART_FORM When I execute the action, I get a printout that reads 'PDF
-
What is wrong with Imessage? it says " waiting on activation"
Imessage was acting up on me this morning, So i decided to turn it off & then back on. It will no longer turn back on. I have restarted it, Reset network settings & shut off phone. NOTHING IS WORKING!!!