Resetting Router Once a Month

I have Verizon Fios and am having to reset my router about once a month or less! It is frustrating and madenning! My internal network still works but the internet connection is lost, it says there is no "coax" connection. I reset the router by holding in the reset button with the power off and when I let go and plug it back in it comes back up and works just fine until the next time. It is like Verizon resets something and my router says 'no way jose' and just sits there! I was out of town and it went down the first day, 3 days later I came home, reset the router and it worked just fine immediately! I talked to my neighbor and he is having to do the same thing!! I have had my router for a couple years now so I am thinking it is just an older one, my neighbor and I have the same one after getting Fios at the same time.

well, it says no coax.  Have you tried unplugging and replugging back in the Coax, or is it a short enough run, that you can replace the cable? 
The routers are also replaceable at the local Verizon Stores.  you can see if you have one near by and try a new one.  Just take your old one and it's an over the counter exchange. 

Similar Messages

  • WRT54G3G-ST router - no internet connection - can't reset router

    Hello.  Definite longer story definitely not short (I apologize for the rambling length...  I don't know what is and isn't important, so scan at will, please...  I am sorry...):  Recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Virus Scanner and Firewall, and a Linksys Wireless-G WRT54G3G-ST router with its power adapter plugged into the wall electrical outlet and a network cable from it directly connected to my computer.) got a drive-by Generic.dx trojan without me downloading anything from one of the few sites I visit daily.  My internet connection crawled, and I now have no connection at all. 
    I've been getting help from McAfee forums very helpful and quick good volunteers...  They recommended Malwarebytes Anti-Malware to me, which I downloaded from my second clean computer (a laptop) to my flash drive, then to my infected computer.  I ran it, tried updating it as recommended, and only then discovered the trojan killed my broadband entirely.  I scanned with it anyway, and it quickly found and removed/quarantined 11 Adware.MyWebSearch related files, but nothing else.  They then gave me a link to an offline updater patch file, and told me scan in safe mode until nothing else was found and check if it fixed my lack of broadband access.  Which I did, Malwarebytes found nothing else, but unfortunately I still had no broadband. 
    Next, they recommended WinsockXPFix.  Which I ran and it made all its registry changes OK, I rebooted as required but still no broadband unfortunately.  Did using WinsockXPFix make things worse for me with the registry changes it made?  I used its registry backup to save the pre-changed registry files prior to running.  Should I revert back since I still have no broadband connection?  The McAfee volunteers then kindly told me I needed to hard reset the router, though I've tried countless times with no fortune.  I'm at a definite loss as to what, if anything, I can do to hopefully get my broadband back, please... 
    It's very confusing with the numerous different variations to reset routers, and what I need to do for my router model (Variations:  Unplug this cable/adapter exactly where, or not; hold the reset button between 5-30 seconds; rebooting the computer, or not; waiting 1 or 2 minutes between various steps, or not - and for all of these at what exact point in the reset process.). 
    I reset it once before with the reset button, routers page at http://192.168.1.1, default admin password, then changed it for security, etc; but this time I can't get it to work.  I'm happy as can be to try again, to get a walk-through maybe, anything please...  When I go to http://192.168.1.1 now, or any other address, Internet Explorer gripes at me that I'm offline, which is annoyingly correct.  I don't have, and never had Zone Alarm, but disabling my McAfee Firewall doesn't help.  IPCONFIG at the Command Prompt gives me a Windows assigned address of 169.254.X.X 
    I was going to use the routers Setup Wizard CD to try to reset the router, and if that failed to try to get its firmware version number to maybe upgrade.  But I was going to ask here first for expert advice since I've read many things that can go wrong while upgrading firmware.  However, scanning the CD (Without running the CD.) McAfee found the virus W32/HLLP.Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why. 
       I scanned my entire computer several times and no infections were reported.  I uploaded the file several times to both www.virustotal.com (39 online virus scanners), and virusscan.jotti.org (20 online virus scanners) and every time every virus scanner reported no possible infections.  Is my up-to-date McAfee virus scanner reporting a false positive and yet Jotti and Virustotal's 2 McAfee scanners report the file as probable clean?  Is "_desktop.ini" a legitimate Linksys file?  I found no information on Linksys/its forums about it.  My problems just keep multiplying...mentioning of more problems... 
    Finding that suspect file on the CD I decided to instead download the Setup Wizard from Linksys
    (Router product page:  http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download
    Actual file:  http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
    to my flash drive, then to my infected computer that is connected to the router.  I ran it (Downloaded file version: 4.2.0.007 - Original CD Setup Wizard version: 4.0 printed on CD front.) and it immediately gave 1 of 3 options:  Mobile Broadband Only, Broadband WAN Only, or Broadband WAN and Mobile Broadband.  I don't know what damage, if any, I caused by continuing. 
       It looked like it was trying to go through the entire router setup process.  I thought it would take me to some options to reset the router, as I've read in the User Guide and elsewhere - that was my understanding.  The setup process stopped at only 30% done "Router not found, please make sure the router is properly connected and try again."  How much overwriting of original router setup files did I do by continuing?  I'm entirely confused.  Doesn't the Wizard check if the router has been previously setup prior to setting it up again?  Did the version difference cause my router to not be detected by the Setup Wizard?  Did the Generic.dx trojan that killed my broadband trash my computer settings so bad that my router is undetectable/essentially not setup? 
    Update of sorts:  I tried one last time to reset the router, and I unplugged/plugged the network cable.  Doing that I still had no broadband on my main usage Dell XPS computer that's connected to the Linksys router.  However, my laptop, with Data Card in the router, was for the first time able to find the network - the constant connection and speed is brilliant, it's what it allways has been on the laptop (Since the trojan/router problems, my laptop only had broadband with the Data Card in the laptop.).  Maybe the network cable simply wasn't re-connected properly/entirely during 1 of the many reset attempts, it indeed could also explain the downloaded Setup Wizard not being able to find the router/only getting 30% done. 
    Laptop Command Prompt IPCONFIG /ALL with Sprint Data Card inserted in laptop computer slot: 
    IP Address    = 174.158.XX.XXX (Sprint)
    Subnet Mask = 255.255.255.255
    DNS Servers = 68.28.90.91
                               68.28.82.91
    Laptop Command Prompt IPCONFIG /ALL with Sprint Data Card inserted in router: 
    IP Address    = 192.168.1.1XX
    Subnet Mask = 255.255.255.0
    Default Gateway = 192.168.1.1
    DHCP Server      = 192.168.1.1
    DNS Servers      = 192.168.1.1
    Since my laptop started working with the Data Card in the router I haven't tried again to reset the router, nor have I tried the downloaded Setup Wizard.  I don't want to mess anything up further than I have(?) / the trojan has, and I need some expert advice, please, as to which of the 2 if either I should do (first?).  On my laptop computer only, typing http://192.168.1.1 in Internet Explorer gets the pop-up for username and password, but I haven't proceeded.  I've read you shouldn't reset the router and/or(? Is it both or just 1 please?) upgrade the firmware unless the computer is directly connected to the router - which my laptop is not.  On my other computer that still has no broadband, Internet Explorer still tells me I'm offline when typing http://192.168.1.1 into it.  My IP Address on it is still a Windows assigned 169.254.X.X and a Command Prompt PING 192.168.1.1 returns with "Destination host unreachable.", as it allways has and same with all other addresses (Except for 169.254.X.X). 
    Annoying 2nd "update" of sorts, apologies for length, as allways:  I've been so focused on the trojan/broadband killing that I've cluelessly largely forgot that I have dial-up with AOL.  Trying AOL dial-up also does not work, the insanity thickens...  AOL software tells me to check my connection, but all phone cords are plugged in as should be.  I plugged a phone directly into the wall outlet and I get a dial tone, I can call out OK, and the phone rings and gets calls OK.  Device Manager-Modems-Properties-Device Status says the modem is working properly, and Resources Tab shows no conflicts.  Diagnostics Tab's Query Modem looks OK to me, as does the log, but as allways I'm definitely no expert.  I didn't change any settings anywhere. 
       I have noticed off and on that checking IPCONFIG it says my IP Address is 192.168.1.100   It lasts maybe a day (then goes back to 169.254.X.X), maybe longer, I don't know - I don't check that often to pin it down (Should I?).  During this time neither my broadband, nor my dial-up works.  I can PING 192.168.1.100, but nothing else.  I'm convinced the evil trojan killed both my broadband and dial-up - I've never had a problem with my Conexant D850 56K V.9x DFVc Modem prior.  Also, I'm not convinced the trojan is not still lurking everywhere on my computer, I think it is... 
    Any and all help in restoring my broadband/dial-up is greatly appreciated, please...  Thank you! 
    Solved!
    Go to Solution.

    Hello.  It's been entirely too long since I've replied, I'm sorry.  There's no excuse, and it's terribly rude of me...  You took the time to read and reply to me, and I endlessly appreciate that indeed.  I apologize for my long delay, I'm sorry... 
    After I left my message I downloaded many virus/spyware scanners, etc. from my laptop onto my flash drive, then my other computer for some needed thorough deep scans.  One that I downloaded was Network Magic, which somehow, someway fixed both my broadband/dial-up internet on my main computer that's connected to the WRT54G3G-ST router.  I don't know what/how it repaired my connection, but the broadband connection/speed has been working brilliantly since...  Network Magic worked for me, and I highly recommend it to everyone who has stubborn complete lack of internet problems (caused by trojans at that) as I did.  There's no guarantee it'll work, but it did for me to my amazement. 
    Network Magic, as is Linksys, is owned by parent company Cisco.  Respectfully to all the good knowledgeable experts here (Which clearly I am not.), I don't want to tread out of my bounds.  I'm simply trying hopefully to be helpful and save some headaches for both you the volunteers and the users...buying a new router and/or computer was on my mind, with all due respect I recommend suggesting to try Network Magic to users if resetting the router/all else fails, please.  I did use WinsockXPFix/WinsockFix utility prior to using Network Magic, I don't know if that matters. 
    I also upgraded my McAfee package, I installed over my old software instead of uninstalling first, which caused errors in the virus scanner of all critically needed things.  I have it installed properly now, but it did cause quite a delay in re-focus of my time.  Some of the virus scans also found many trojans, some were the same/in the same folders that killed my broadband - which stopped me in my tracks to insure uninfected cleaning. 
    That definitely doesn't entirely explain the long lapse of time, and I apologize for that, again.  It's just that I'm trying to be cautious and slow in all this.  To answer the first very good idea you made:  Unfortunately, there's no place on my other computer to plug the router in to, which all the more so caused frustration (at the time).  I forgot to include this in my novel length post of countless things to check/remember...  It was a brilliant idea though, thank you... 
    I thank you for your time and help, I do sincerely appreciate it...  Thank you...  I think, and hope this matter is solved.  It seems to be, the router is working perfectly as it allways has, and I'm positively happy as can be about it.  Thank you...  Peace... 

  • This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ag

    I tried to add this in the topic already open but it kept sending me through the unending rabbit holes!
    My question is: How do I figure out what release I was on, get rid of this one and got back to a functional firefox that moves in realtime. I already did all the reset and etc.... I just want to go back to the speed I had. This halting , hanging up misery of a browzer is Sad. I have had firefox for years and always recommended it ..... BUT NOT ANY MORE. I agree with the other poster ... there should be a rollback feature. Peoples time has value and right now FireFox is sucking the value down a rabbit hole.
    See Below Comment Feedback submitted before I finally got here:
    This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ago and it slowed down..... but the latest update before I did the reset really slowed me down. I came here to fix it a couple of dayz ago and did the reset firefox and now it IS RUNNING SO POORLY AND SLOW I AM ABOUT TO KILL IT OFF MY MACHINE!!! Yes that is me yelling - and it happened in SSSSSSSSSSSSS LLLLLLLLL OOOOOOOO WWWWWWWWWW Motion. I have run all the security scans and cleanups ---this needs a fix ASAP!!! PS: The hang ups and slowness is EVERYWHERE I go. I only get speed doing programs not connected to ON LINE.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Once a month Drop/Recreate Sequence

    Hello,
    I have very little experience with a stored procedure, but I'm working on learning. This is what I am trying to achieve:
    I have a sequence that I need reset once at the beginning of each month. I am using it as a monthly counter. I can code in my program to drop the sequence and re-create it once a month, but I'm really looking to do this with some type of triggered stored procedure within the DB.
    Thanks for all suggestions,
    Rick

    Here is an example of what Justin and Scott are saying using a view and analytic functions to give you all the information you are looking for. Note I chose an idiosyncratic increment value in this demo purely to enforce the concept that a sequence generated id should be unique only and not have any meaning.
    SQL> create table upload (
      2      id              number,
      3      description     varchar2(10),
      4      upload_date     date
      5      );
    Table created.
    SQL> create sequence upload_seq start with 10000 increment by 17;
    Sequence created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 1', date '2005-01-07');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 2', date '2005-01-15');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 3', date '2005-01-22');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 4', date '2005-02-02');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 5', date '2005-02-25');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 6', date '2005-03-10');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 7', date '2005-03-16');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 8', date '2005-03-21');
    1 row created.
    SQL> insert into upload values (upload_seq.nextval, 'Upload 9', date '2005-03-23');
    1 row created.
    SQL> create or replace view upload_monthly as
      2  select id, description, upload_date,
      3      row_number() over (
      4          partition by trunc(upload_date,'mm') order by upload_date
      5          ) monthly_count,
      6      count(*) over (
      7          partition by trunc(upload_date,'mm')
      8          ) monthly_total
      9  from upload;
    View created.
    SQL>
    SQL> select * from upload_monthly;
            ID DESCRIPTIO UPLOAD_DA MONTHLY_COUNT MONTHLY_TOTAL
         10000 Upload 1   07-JAN-05             1             3
         10017 Upload 2   15-JAN-05             2             3
         10034 Upload 3   22-JAN-05             3             3
         10051 Upload 4   02-FEB-05             1             2
         10068 Upload 5   25-FEB-05             2             2
         10085 Upload 6   10-MAR-05             1             4
         10102 Upload 7   16-MAR-05             2             4
         10119 Upload 8   21-MAR-05             3             4
         10136 Upload 9   23-MAR-05             4             4
    9 rows selected.
    SQL>Hope this helps.

  • Can't remember the command - used to clean up once a month

    I read it watching a Lynda . com review and he said for mac, (I think it was either Shake or Photshop?) that once a month he holds a buttong down in mac during bootup until right before the bootup sound, or lets go right after. Its supposed to reset something, reindex, etc, etc, and get the system in tip top shape and nice and zippy.
    Does it work and what is the "key"?
    Thanks

    I think you are asking how to decrease boot time, not increase it, right?
    Login Items can be found in System Preferences > Accounts > Login Items tab. Do not remove login items without knowing what they are for, since some are necessary for normal operation of certain applications.
    A faster drive will decrease boot time, but not by as much as you might think, probably no more than 10% or so. Since they typically use more power & that reduces battery run time, you will have to decide if the few seconds saved at startup is worth it.
    Your owner's manual should have a section explaining how to replace the hard drive if yours is one of the laptops that makes it easy to swap out.

  • I have reached my 5 computer max and reset less than 12 months ago - I am getting an error to say I cannot delete the accounts until 9 September - is there anyway around this?

    i have reached my 5 computer max and reset less than 12 months ago - I am getting an error to say I cannot delete the accounts until 9 September - is there anyway around this?

    Have you had a Look Here...
    Aurthorise / Deaurthorise About
    http://support.apple.com/kb/HT1420

  • My Mac was hung up, friendly support person helped me empty cache, said to do it once a month. How did I do it? And what other regular maintenance things ought I be doing?

    My Mac was hung up, friendly Apple Support person helped me empty the cache, said I should do it once a month. Forgot how I got there to do it. And what other regular mainentance ought I be doing?

    See Thomas Reed's Mac Performance Guide, item 7.
    You don't need to clean your caches once a month. Doing so will only slow down your computer. OS X takes care of that kind of maintaince.
    Clinton

  • My iphone 5 only connects to wifi when i'm in the room which has the router. once i leave i get no connections. please help me.

    i have a iphone 5. i can only connect to the wifi when im in the same room as the router. once i leave my wifi does not connect. please help me fix this.

    Hello nishaanth,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • FTP Polling Adapter Unresponsive or Hangs Once in Month

    Hi,
    We have 3-4 services in BPEL 11g which polls data from the FTP server .But out of which one services hangs or Unresponsive (once in months).Due To which files are not picked up from FTP server. Others services are working fine.
    Currently, we are monitoring this interface and bounce FTP Adapter (sometimes even SOA Servers as well) in order to prevent this scenario.You are therefore, kindly request to suggest a permanent fix to this problem.
    Regards,
    Dumesh Kumar

    http://docs.oracle.com/cd/E14571_01/core.1111/e10108/adapters.htm#BABCICBB
    15.2.1 Inbound Throttling Best Practices
    Increase the thread count
    paste this line in ur composite.xml under " <binding.jca config=..... .jca/>"
    <property name="ThreadCount" value="40"/>

  • Once a month to zero charge

    So I'm following the advice from Apple to let my iPad run to 0% at least once a month, then charge it to 100%. This supposedly yields a more accurate percentage of charge displayed during regularly usage.
    Question now is, how to let it go to 0%?
    For example, just now it was very low, so I simply turned up the brightness and played a video. It abruptly went dead silent. So yes, that's zero charge. But it didn't feel right. Maybe I'm too used to the Macintosh, where we should always use the shut down command instead of yanking the power cord.
    Is there a better way to zero out the battery?

    As Dah•veed said, that's the way to do it. That is how you get the iPad to shut off on it's own, by using it until the battery runs down and it shuts off.
    You only need to do this once a month in order to calibrate the battery sensor in order to get a more accurate reading from the battery gauge. Don't let the iPad drain down to zero routinely before you recharge the battery. Only do that once a month.
    I charge the battery every single night no matter what the battery gauge reads. I have done this since day one with both of my iPads.

  • Once a month backup on time capsule

    Does anyone know how to set my time capsule to only back up once a month and not every hour - i have around 80GB of data and hourly updates of 80GB has filled up my 500GB time capsule rather fast.
    HELP

    handapaul wrote:
    Hi
    Aperture backs up everything - everytime - hence it did multiple backups in one day and wiped previous backups hence - not so much of a time machine, if you canonly go back one day.......be warned.
    Not quite . . . according to http://docs.info.apple.com/article.html?path=Mac/10.6/en/15140.html, that happens if Aperture is open when a backup runs.
    If that's a problem, turn Time Machine OFF while using Aperture.

  • Once a month my email contacts get sent out to everyone without me sending them what can i do to stop that?

    once a month my email contacts get sent out to everyone without me sending them,what can i do to stop that?

    Check you haven't been infected by a Botnet:
    Simply put, a bot – which is short for robot – is an automated computer program that allows outside sources to control computers remotely without the users' knowledge. A botnet is a network of hundreds or thousands of computers infected with botnet malware that communicates covertly with a command-and-control (CnC) server run by a type of cybercriminal called a botmaster. Unbeknownst to the individual users, their computers are linked in a rogue network which the botmaster can utilize for a variety of nefarious purposes.
    Detailed information here:
    http://mac-internet-security-software-review.toptenreviews.com/how-do-i-know-if- my-computer-is-a-botnet-zombie-.html
    Contact your ISP.

  • E-mail via Workflow task is not send they say aprox once a month

    Hi there
    I am asked to check one system with a “workflow” running 2+ years. It is actually an task with method which sends an e-mail when Purchase requisition is created.
    It istriggered by event in user exit(via function).
    The version is IS oil 4.6C.
    The problem is that e-mail is not send they say aprox once a month (which I personaly do not believe). However I have to do something (and explain what could be the reason).
    What would be your idea to do?
    I have in mind to subtye BUS2081 to e.g zz BUS2081 and then delegate bus2081 system wide(which is not done (but I think this will not solve the problem).
    In addition all technical details:
    I created event  ZCREATED for object ZABUS2105 (done as copy of BUS2105) in user exit MEREQ001 (EXIT_SAPLMEREQ_008) while creating purchase requisition via z transaction me51n and my colleague added this function in MV45AFZZ(while creating purchase order from sales order).
    CLEAR EVENT_CONTAINER. REFRESH EVENT_CONTAINER.
    i_banfn = IM_BANFN_NEW.
    CALL FUNCTION 'SWE_EVENT_CREATE'
           EXPORTING
                OBJTYPE           = 'ZABUS2105'
                OBJKEY            = i_banfn
                EVENT             = 'ZCREATED'
                          creator           = sy-uname
           TABLES
                EVENT_CONTAINER   = EVENT_CONTAINER
    This event triggers workflow task TS92000018
    Task TS92000018 is a  background task and has  atribute »general task« . Metoda (program) is:
    BEGIN_METHOD ZWF_SEND CHANGING CONTAINER. 
       call function 'ZWF_SEND_MAIL7XX'      
          Exporting                        
           banfn = OBJECT-KEY-NUMBER.                                                                               
    END_METHOD.
    Function Z_SEND_MAIL7XX:
    FUNCTION ZWF_SEND_MAIL7XX.
    ""Local interface:
    *"       IMPORTING
    *"             REFERENCE(BANFN) TYPE  BANFN OPTIONAL
    *"             REFERENCE(STATUS) DEFAULT 1
      DATA: reclist   TYPE STANDARD TABLE OF somlreci1  WITH HEADER LINE,
            objtxt    TYPE STANDARD TABLE OF solisti1   WITH HEADER LINE,
            objpack   TYPE STANDARD TABLE OF sopcklsti1 WITH HEADER LINE.
      DATA: doc_chng  TYPE sodocchgi1,
            tab_lines TYPE sy-index,
            subject   TYPE so_obj_des,
            email like zwf_emailko7XX,
            menge(17) TYPE c,
            I_Zwf_obdelan7xx like zwf_obdelan7xx,
            I_eban like eban  occurs 10 with header line.
            SELECT SINGLE * FROM Zwf_obdeLAN7xx into i_zWF_obdelan7xx WHERE
    BANFN
    EQ
    BANFN.
      IF sy-subrc NE 0.
    KONCNEMU
    SELECT single * FROM eban where banfn = banfn.
        SELECT single * FROM zwf_emailko7XX into email
                        WHERE  ekgrp = eban-ekgrp.
    refresh reclist.
        reclist-receiver = email-SMTP_ADDR.
        reclist-rec_type = 'U'.
        APPEND reclist.
    CONCATENATE text-015 banfn INTO subject SEPARATED BY space.
      doc_chng-obj_name = 'SENDFILE'.
    Mail Subject
      doc_chng-obj_descr = subject."text-001.BO22.11.2005
    Mail Contents
    refresh i_eban.
      CONCATENATE text-015 banfn text-016 sy-mandt text-017 eban-ernam INTO
    objtxt
    SEPARATED BY
    space.
        APPEND objtxt.
    select * from eban into i_eban where banfn = banfn.
    menge = i_eban-menge.
      CONCATENATE  i_eban-matnr i_eban-txz01 menge i_eban-meins INTO objtxt
    SEPARATED
    BY space.
      APPEND objtxt.
      append i_eban. clear i_eban.
    endselect.
      DESCRIBE TABLE objtxt LINES tab_lines.
      READ TABLE objtxt INDEX tab_lines.
      doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
      CLEAR objpack-transf_bin.
      objpack-head_start = 1.
      objpack-head_num = 0.
      objpack-body_start = 1.
      objpack-body_num = tab_lines.
      objpack-doc_type = 'RAW'.
      APPEND objpack.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                document_data              = doc_chng
                put_in_outbox              = 'X'
           TABLES
                packing_list               = objpack
               object_header              = objhead
               contents_bin               = objbin
                contents_txt               = objtxt
                receivers                  = reclist
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                operation_no_authorization = 4
                OTHERS                     = 99.
    insert into zwf_obdelan7xx values banfn.
    commit work.
    endif.
    ENDFUNCTION.

    There are several things you can check before starting to check the code/solution.
    I would start by sending an e-mail from SAP Business Workplace - either to someone who say he/she receives e-mail only once a month, or to yourself if that is not possible. Check how long it takes from the mail is sent until it is received. Once the first mail has been received, send another mail and check the time again (to determine the sendmail process' interval). Of course you can probably just check the configuration of send processes ... but you may as well give them some hard proof.
    Secondly, check the send log (transaction SOST) - and find out how often there are the type of messages you are interested in. Alternatively, test the workflow and verify that messages are sent immediately.

  • Is it possible to rotate log of iplanet server once a month ?

    Instead of changing log file each day or each week, I would like to know if is possible to rotate log of iplanet server once a month.

    Yes, you may use the internal daemon log rotation (available in iPlanet Web Server 4.x and 6).
    Using this new feature introduced in iWS 4, you may set up the rotation start time and the interval for the next rotation to happen (in minutes).
    For every hour the interval is 60, every day 1440.
    To config internal daemon to perform log rotation every 30 days the interval would be 43200 minutes.

  • Does Apple want you to let the battery get low once a month or completely  drained to zero%?

    Does Apple want you to let the battery get low once a month or completely  drained to zero%?

    Of course, if you use the device it is likely that you will have charge cycles in any event.
    On devices with percent charge indicators (iPad, iPhone) I believe that Apple recommends a charge cycle once a month to keep the percent indicator accurate.

Maybe you are looking for