[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)

I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old?

Similar Messages

Kernel panic when booting from USB

Hi guys, I'm trying to install arch on a cd-less HW (www.linutop.com) but during boot from USB
I get this kernel panic:
:: Waiting for devices to settle...
usb 2-3.1: configuration #1 chosen from 1 choice
:: Waiting 16s for USB devices
scsi 2:0:0:0: Direct-Access CBM Flash Disk 4.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb]: Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
:: Scanning for boot device...
:: Scanning cd drives...
:: Scanning usb drives...
/dev/sdb1
squashfs: version 3.4 (2008/08/26) Phillip Lougher
Registering unionfs 2.5 (for 2.6.27-rc6)
:: Mounting root (union) filesystem
:: Mounting images
::: Binding /bootmnt to bootmnt
:: Passing control to Arch Linux Initscripts...Please Wait
/bin/run-init: opening console: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
This happens with both images archlinux-2009.02-2-ftp-i686.img and archlinux-2009.02-core-i686.img.
Have checked md5's of the downloaded files and they were correct, have also tried to double write it
to the usb stick but still the same kernel panic message.
(I can play play space invaders from the grub menu though :-) )
Many thanks for any info on this.
UPDATE:
Ups, it uses AMD Geode processor and google doesn't suggest it's i686 compatible. Can this be the reason? Please confirm and I'll mark this as solved.
Last edited by inetic (2009-03-22 23:56:39)

It is Geode LX. Thanks
Last edited by inetic (2009-03-23 12:11:32)

Blue screen when booting from USB drive in UEFI mode (2013.07)

SOLUTION for me was to update the firmware on my ASRock mb as thatu pdate changed the EFI software (by American Megatrends) version from 2.00 to 2.31. However, other users are still experiencing the blue screen.
SHORT VERSION
When I try to boot Arch Linux 2013.07 with an USB drive in UEFI mode (for installation), I get a blue screen (which is rather a literal description and not a hint towards the old Windows' one) with the message
Failed to install override security policy (14): Not found
LONG VERSION
I made an USB installation media (product: Intenso Rainbow) by following this advice on the wiki.
I used the july release of Arch for that. First of, after installing the image to the USB stick I found that I needed to correct the label in the archiso-x86_64.conf file to ARCH_201307 (or was it the label of the usb stick, can't remember right now). (Pretty sure it was the same problem with "Linux Live USB Creator" which I used 3-4 months ago...)
After doing that, I rebooted and selected the entry
UEFI Intenso Rainbow
from this list of entries:
SATA HDJ ... something (the hard drive where Win 7 64 bit is installed with all programs)
SATA something (hard drive which only contains data)
Windows Boot Manager
USB: Intenso Rainbow
UEFI: Intenso Rainbow
It went to a blue screen with a message in white text saying
Failed to install override security policy (14): Not found
Below that was an OK button which had a black rectangle over it.
After I experienced the bluescreen, I tried booting the
USB Intenso Rainbow
entry and the boot process then worked fine, I got to that Arch menu where I could choose
Boot Arch Linux (x86_64)
Boot Arch Linux (i686)
Boot existing OS
Run Memtest...
and so on...
But just to make sure, I then did the check for UEFI mode according to this and only saw a folder acpi and ... something else I can't really remember, but it definitely was not efi. Thing is, I needwant to boot into UEFI mode as I have Win 7 already installed in UEFI mode.
Some info about my motherboard: it's from ASRock and is called H67M. The BIOS is dated to 2011-10-26 and is version 1.7.
So far, I only found a mention of the problem here at superuser.com.
Last edited by jones (2013-07-15 07:15:18)

Ok then, so this thread has also become about the blank screen problem when booting (in this particular case, Arch 2013.06 since 2013.07 seems to be worse).
srs5694 wrote:Typically, you adjust kernel boot options using your boot manager or boot loader. In GRUB, you hit the "e" key to open an editor. In rEFInd, you hit F2 or Insert twice. I don't recall offhand what key does the job for gummiboot (which I'm pretty sure the Arch installer uses), but I'm certain it's got the feature.
You are right. Thanks. I realized I had the gummiboot config right in front of me all the time. It's the file 'archiso-x86_64.conf' in \loader\entries (on Windows).
An addendum: I think the USB: Intenso Rainbow boot option takes me into a GRUB menu. Hitting 'e' in this "big" and fully designed menu didn't do anything IIRC. Hitting 'Tab' did the trick to get into editing the boot command line.
Hitting 'e' worked in the gummiboot menu though.
So I tried booting with the following options (also by combining some of them)
nomodeset
acpi_backlight=vendor
radeon.modeset=0 (I have a Gigabyte 7870 card in this desktop machien)
i915.modeset=0
but it did not help.
To be rather safe than sorry: I should mention that there are two grey-ish bars visible on the top and bottom of the screen after I try to boot the first entry, Arch Linux archiso x86_64 UEFI USB. Always has been with those two older Arch version (2013.05+2013.06). I also found another thread where one user talks about using the VGA port of the monitor, which I am currently not, I am using the DVI one, so that's worth a try too. EDIT It did not help either. What I did was setting the primary graphics adapter in the UEFI north bridge configuration menu to 'onboard' which worked immediately when rebooting (I hit the button labeled "Source" on my monitor and it showed it is using the "Analog" mode), but the problem just stayed the same. Adding aforementioned boot options or a combination thereof did not change anything.
Thanks for the e-mail addresses, I sent one to James Bottomley.
Last edited by jones (2013-07-07 11:12:05)

No GRUB menu when booting from USB stick with new archlinux

Hi,
I want to try archlinux but I do not have a full backup of my current system right now, such that I do not dare to install archlinux on it. I decided to install it on a USB drive and followed the Beginners Guide considering the hints for installations on USB sticks.
The first issue that I had was that I was not able to to install gurb and it complained that no boot partition was available. I started from scratch again but this time choose the partition type EF02 (bios boot partition) instead of the default 0700 (I only have one partition on the stick). This time everything went fine until I rebooted from the USB stick. Instead of a grub menu I got:
GRUB GRUB GRUB GRUB GRUB GRUB
and nothing happened.
I booted again from the boot cd with archlinux and did the following to examine the grub installation again:
mount /dev/sdb1 /mnt
arch-chroot /mnt /bin/bash
grub-install --recheck --boot-directory=/boot /dev/sdb
>Installation finished. No error reported.
grub-mkconfig -o /boot/grub/grub.cfg
>Generating grub.cfg
>Found linux image: /boot/vmlinux-linux
>Found linux image: /boot/initramfs-linux.img
> WARNING: Failed to connect to lvmetad: No such file or directory. Falling back to internal scanning.
> No volume groups found
>Found LMDE MATE Edition (1) on /dev/sda1
>done
I don't know what the grub-mkconfig output should look like...
Do you have any idea how I can fix this?
Thanks in advance!

Welcome to Arch!
EF02 is definitely not the type code you want. That is used for a small partition with no file system which grub needs on GPT disks because it cannot fit into the space on disk. You don't install anything into it and it is 1-2MB.
Perhaps https://wiki.archlinux.org/index.php/Usb_installation would help?

HT1948 Does the macbook use the internal harddrive when booting from usb and when fully booted?

I wonder if the Macbook Air uses the internal SSD drive when booting Mac OSX lion 10.8.2 from a bootable USB stick?
I am suspecting the internal harddrive is faulty because it gives me random system freeze ups during normal use, making me hold the power button to shut it down. So I'm wondering if I boot my macbook from a bootable USB, if the internal drive is used for caching or anything?

What i'm doing when it freezes is totally random. I am not having any programs open, but for example just clicking on the apple icon or starting up safari, there seems to be no specific program that crashes it. I'm still running without a freeze up after I fixed the drive permissions with Disk Utility. But here is Etrecheck;
Hardware Information:
MacBook Air - model: MacBookAir2,1
1 1.86 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 0:9
Disk Information:
APPLE SSD SM128 disk0 : (121,33 GB)
disk0s1 (disk0s1) <not mounted>: 209,7 MB
MacBook Air (disk0s2) /: 120,47 GB (106,36 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
       [failed] com.apple.afpstat.plist
       [failed] com.apple.mrt.uiagent.plist
Launch Daemons:
   [not loaded] com.bjango.istatmenusdaemon.plist
Launch Agents:
       [loaded] com.bjango.istatmenusagent.plist
User Launch Agents:
User Login Items:
iTunesHelper
3rd Party Preference Panes:
None
Internet Plug-ins:
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes:

Garbled graphics when boot from USB

When I boot, I get nothing. When nomodeset is on, I get the screen in the picture below.
https://drive.google.com/file/d/0B6vGdX … sp=sharing
It's the nVidia GT610
Last edited by linuxuser21 (2014-12-09 05:52:05)

vi2nano wrote:nomodeset noapic noacpi nofb
Unfortunatly, this produced the same result; however pci=noacpi got me past the garbled screen. With this; however, I have no IDE hard drives or netork adapters.

How can I get network connection when booting from usb stick or dvd

Computer: HP Pavillion P6-2450eo
Secure Boot disabled
Legacy Boot enabled
Thruogh F9 I can boot in uefi mode from DVD and USB stick but I can't get at network connection from the loadet program. I have tried with Ubuntu 13.04, Linux Mint 15 and Boot Repair - all with same result.
How can I get the programs to boot with network connection?
On beforehand thanks!
poul1304
This question was solved.
View Solution.

Please verify that the programs (Ubuntu, Mint, Boot-Repair, etc.) you are attempting to use, support the Atheros AR8161L gigabit ethernet controller natively. Not all operating systems and software programs support every network device and/or configuration otut of the box. Many times, specific drivers must be loaded or injected into the OS for a device to function properly.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.

Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.
This is a problem that suddenly appeared.

Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Why won't DiskWarrior boot up my mac? (no entry sign when booting from DW)

I get a "no entry" sign (black circle with a diagonal line through it" when I try to boot from the DW dvd. I'm not sure which type of macbook I have but it was bought in January 2007, and before my file system got corrupted my OS was 10.4.11 . I can boot perfectly find from a Data Rescue 3 DVD (and have already used this to backup all my files) and from the OS X install DVD, so why am I getting this error when booting from DiskWarrior? The apple sign appears and the cog spins for a minute or two and then the no entry sign comes up and stays there...
It's DiskWarrior 4.2.

is this a disc which was mailed to you or one you burned? sometimes their downloaded "upgrades" are just for install only, you have to contact them for the disc...
if this is suppose to be a genuine boot disc, it could just be a bad burn. the boot DVDs should be apple partition map.

No Harddrive when booting from OS 9.2.1 CD on G4 MDD 1.25 Dual

I also have a G4, 1.25 GHz dual processor running OS X 10.2.8 and 9.2.1 updated to 9.2.2, 1 GB RAM.
When booting from OS 9.2.1 CD (came with the computer) I do not see any harddrive. Need to reinstall OS 9 for some classic applications.
Drivesetup can not find any disc to format.
Any idea?
PowerBook G3/400 Mac OS X (10.3.9)

Hi, kai -
Welcome to Apple's Discussions.
An OS 9-bootable G4 MDD model requires OS 9.2.2 as the minimum OS. Apparently some models of G4's which require OS 9.2.2 can in fact boot to some OS 9.2.1 Install CDs, but that is all - they can not run the installer or do much else.
Your G4 MDD model originally shipped with a combo set of install disks; none shipped originally with a separate OS 9 Install CD (the last G4's to do so were QuickSilver models). You can ise that set of disks to re-install OS 9 (Classic).
One or more of these Apple KBase articles may help you do that -
Article #106294 - Mac OS X: How to reinstall Mac OS 9
Article #107383 - Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
Article #42929 - Using Restore Discs with Mac OS X 10.2 or later
There can also be an issue with what bus a hard drive is on. As I understand it, in order see a hard drive on the ATA/100 bus on a G4 MDD model when booted to an OS 9 Install CD, the System Folder on the CD must contain the file Mac OS ROM in version 9.5.1 or later. No OS 9.2.1 Install CD (or earlier version) contains that file version.

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Ethernet seems to work when booted from Leopard DVD--Not anytime else

Ok. Here is the deal. iMac G5 connected via ethernet cable to router. It will not connect. The airport works fine. I unplug the same cable and plug into macbook pro--it works just fine. Plug it back into iMac.
In network utilities when booted from the disk--I can ping away just fine. So--in network preferences when I boot it up again I attempt to put the IP address, subnet, router yada yada yada in manually and after about twenty five seconds of the program chewing on it--it crashes. Over and over again. Airport works just fine. PowerBook and Mac Pro connected to same network---all check out.
Any thoughts?

Hi,
The internet port is meant for modem, and ports 1,2,3,4 are meant for computers.
After making proper connections reset router for 1 minute, and rebbot it.
Now run easy connect program for configuring router.

Error Message when booting from System CD's

Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuck

Not only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck.

How to use Photoshop CS6 when booted from a different partition?

I have CS6 installed. I recently created a second partition on my SSD for development in OS X 10.10. When booted from that drive, I get an error that CS6 was not properly installed and to re-install it.
This is a smaller partition, with just the system and a few development apps, and I'd prefer to continue to run my larger apps from the original, larger partition.
Of course, every app I have tried does this with no issues except CS6. I usually need to re-enter app serials, but they work.
What files need to be copied from one partition to the other to let the app boot up?

They work fine. I first tried with a clone of my main drive doing an update in place on it.
i guess I will need to boot into 10.9 to use them.
I will mostly use stand-in apps like Pixelmator.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Similar Messages

Maybe you are looking for