Restart of computer with iPod plugged in issue

Hi,
Whenever I restart my Windows Vista computer with my iPod Classic plugged in via USB, the computer freezes and is unable to get past the DELL logo screen. Is there a known issue with this? When I have my USB flash drives plugged in, there is no problem with restarts.
Any information would be greatly appreciated.
James

the ipod is like a mini computer ... you should disconnected first before you restart ... also, restaring with ipod connected might get damaged cos of power changing up and down, so you're risking to damage the ipod. good luck.

Similar Messages

  • HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Try here  >   - http://support.apple.com/kb/TS1369.

  • My MacBookPro 10.7.5 had been streaming tv thru the mini port/HDMI cable. Suddenly it stopped working. My tv screen is now black. I have tried restarting the computer with the cord connected. The computer is otherwise working.

    I had been streaming tv with my MacBookPro 10.7.5 for several years using a cord from the mini port to the HDMI plug on the TV. Suddenly it stopped working. My computer otherwise works fine but there is my computer screen image is no longer being transmitted to the tv. The tv is black. I have it on the correct input.
    I tried restarting the computer with the cord attached. Thanks in advance.

    Test the cord on another external display or test with another cord.
    Ciao.

  • I can't get itunes to recognize my ipod touch, 2nd gen.  synced it yesterday.  have restarted both computer and ipod.  my iphone syncs just fine.

    i can't get itunes to recognize my ipod touch, 2nd gen.  synced it yesterday.  have restarted both computer and ipod.  my iphone syncs just fine.

    You might find these sites helpful:
    The New User's Guide for iTunes
    iTunes 101
    iPod 101
    And of course the iTunes Help is a good, quick resource.
    Regards.

  • TS3173 If I installed windows 7 without the USB drive inserted, do I have to start all over again or can I just restart the computer with the USB inserted?

    If I installed windows 7 without the USB drive inserted, do I have to start all over again or can I just restart the computer with the USB inserted?

    Following up:  tried multiple restarts but ended up needing to remove partition an reinstall windows 7. Now if I could only find that Mac disk to install boot camp.........

  • My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    Have you just tried repairing with Disk Utility?
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Computer won't start with iPod plugged in

    Hey all,
    Just got a brand new MacBook Pro and a 30 gig iPod. When I restart with the iPod plugged into the USB port, the computer sits at the white screen forever and doesn't boot into OS X until it is disconnected. How do I fix this? Thanks!

    I don't know if this will fix the problem, but here it is:
    1. start the macbook up normally w/o the iPod plugged in.
    2. right after u hit the power button hold down the button combination "s" and "command"
    3. do not let go until the screen goes black and white text is on it. when the text stops moving there will be a prompt.
    4. type the following text WITHOUT QUOTES "fsck -f"
    5. then when it is done do that same thing again.
    6. then try to exit type the following text WITHOUT QUOTES "reboot"
    7. then try to reboot with the iPod connected
    if that does not work take it into a apple store.

  • Problems restarting iMac with iPod plugged in after last software update

    Hi everyone,
    I have an almost 2 year old 24" iMac Intel, running OS X 10.4.11 and a 30gb iPod video.
    I've been having problems with restarting after the last software update. When I went to restart my computer as required for the update, it shut down, started up (the start up sound came on) and then went to just a blue screen for about 10 minutes or more. I got worried and shut down by holding the power button. Then I turned it back on and the same thing happened. So I shut down with the power button again, unplugged my iPod and external HD, turned the computer back on, and everything started up as normal. So I figured it had to do with one of those. I found that when I've started up with the external HD plugged in everything is fine, but every time I restart with my iPod plugged in, the same thing happens!
    This has never happened before, and I've never had problems with my iMac before this... Can anyone help?
    Thank you!

    Hi, try-> System Preferences->Start Up Disk->ensure OS is highlited.
    Some Macs find it difficult to Start/ReBoot when an iPhone or iPod is connected, it's as though the computer is searching to boot from an external HD. I would Repair Permissions & do the SMC reset.
    Leave the iPod/iPhone unplugged @ reboot...L

  • Programs don't respond with ipod plugged in

    This is really a pain. Whenever I plug my 30gb 5G ipod into my computer my programs don't respond. This makes it impossible to put songs onto my ipod. I have tried reinstalling itunes and the ipod updater and restoring my ipod, but it only makes it so that itunes doesn't read my ipod. please help.
    30 gb. 5th G   Windows XP  

    I don't know if this will fix the problem, but here it is:
    1. start the macbook up normally w/o the iPod plugged in.
    2. right after u hit the power button hold down the button combination "s" and "command"
    3. do not let go until the screen goes black and white text is on it. when the text stops moving there will be a prompt.
    4. type the following text WITHOUT QUOTES "fsck -f"
    5. then when it is done do that same thing again.
    6. then try to exit type the following text WITHOUT QUOTES "reboot"
    7. then try to reboot with the iPod connected
    if that does not work take it into a apple store.

  • Syncing money on itunes acct in computer with ipod touch

    I redeemed a gift card for $15. My ITunes store on my laptop shows $15.34. But when I Sync the computer with my IPod touch... the $15 does not show on the IPod touch. My account show only .34. How do I sync it properly so that I can purchase from the IPod touch?

    Sync has nothing to do with it.
    The money is on the account. If you are logged into the account on your ipod, then you should have access to the same credit as any other device logged into that account.
    Are you connected to wi-fi?
    Have you tried restarting your ipod or simply closing itunes on the ipod and opening again?

  • Question about using a new computer with ipod

    i was using my ipod nano on my computer and it was working fine. than we found out that we needed to get a new computer. so i plugged in my ipod to charge the battery than i downloaded itunes.(on the new computer) i didn't download any ipod software. at first it didn't do anything. than it recognized my ipod with all the music. i didn't have to make copies of songs, and i didn't have to download any ipod software. how come i didn't get the message about it being linked to a different library? (not that i'm complaining, i'm just wondering)
    thanks

    Is your iPod set to update manually? In that case you don't get the warning that it is linked to another library. Also you don't have to have the iPod Updater installed to use your iPod, you only need it to update or restore your iPod's software.

  • My iTunes will not stay shut down. It automatically restarts even without an iPod plugged in. How do I fix this??

    My iTunes, which is the latest version, will not stay shut down. No matter how many times I exit the software, it automatically starts back up. And NO, there are NO iPods plugged in. It's very annoying and is slowing down our desktop immensly. I've tried to find a setting to change it but I'm not a computer/iTunes expert. Can anyone help??

    try holding the home button and off button at the same time for about 10 seconds, it should restart

  • Why do I have to restart my computer with every Firefox upgrade?

    For that past several upgrades, I have to restart my computer to complete the installation. If I don't restart my PC, firefox will not open. I use firefox on other computers and have never had to restart any of them after an upgrade. The computer that has to be restarted is a Win7 Home Premium 32-bit system.
    What do I need to do to stop the restarts after FF upgrades?

    Run this once and see what happens when the next update occurs? What's strange is that I don't know there was an update until I try to open FF. Then it tells me that I must restart my PC for the upgrade to complete. If I don't, I can't get into FF.

  • Computer freezes with iPod plugged in, songs show exclamation marks, etc...

    HELP!!!
    I've restored, re-loaded, re-installed, updated, etc. but nothing helps.
    I plug in my 40gig iPod, iTunes finds it and starts uploading all my songs. Then, after a random period of time, the entire computer locks up. Mouse doesn't move, nothing. The only way to make the computer come back to life is to unplug the iPod.
    For the indeterminate period of time that the iPod is plugged in and updating, when I check the list of songs already on the iPod, several of the tracks have exclamation marks in a dark circle next to them. These tracks work fine when played through iTunes, but not through the iPod.
    I've run 'Chkdsk f: /F' several times, and it finds plenty of problems and errors.
    It takes me over a month to reload all the songs onto my my iPod because it can't upload more than 500meg without freezing the computer up.
    PLEASE HELP!

    Having the same problem and judging by the other posts i've read so are alot of other ipod classic users. When I sync my ipod it gets up to about a 1000 songs then starts going really slow and i cannot eject so when i unplug it all the songs are gone and i need to restore ipod again.
    I'm getting fed up with this problem i've rebooted my ipod over 20 times trying to fix this problem and i want to know what apple are going to do about it because so far it appears that they are sticking their hands in the sand and ignoring the problem.

  • Windows will not open with iPod plugged in!

    Well, I thought Joey got me through this problem about a week and a half ago, but it only worked once and has been back to being a pain.
    If I leave the iPod Nano 2G, plugged in when I shut off my computer, (XP SP2), then go to turn it on the next morning, it grabs the iPod immediately and my computer locks on the black screen that checks the system. I have to turn the power off disconnect the iPod and then the computer fires right up when I start up again.
    I had 6.? with the Nano, updated twice already to 7.?. Had the problem with all those, but it has to be something before that because it never gets to boot up Windows.
    I have played around in BIOS changing boot sequenses, but have been unsucessful in getting it to start up while plugged in to USB port. I have changed the iPod options as a disk and managing my music, but to no avail!
    What's the sense in having a dock for your iPod when it's in & out, in & out???
    Anyone??
    Thanks in advance!
    Dave
    iPod Nano 2G   Windows XP  

    No I have not, but this was just brought up to me this past weekend, as a possible solution by a local IT guy.
    I'm trying to sift through all the documentation from when I purchased my computer system, to find out what kind of motherboard is in the tower and then go to a site for a BIOS update.
    Unfortunately the manufacturer of my system is defunct. Shame, because I have had no problems with this system since I bought it over 2 years ago.
    Thanks!
    Dave

Maybe you are looking for

  • Time-out on the Answers server to be increased

    The Current situation is User is running a query, it takes sometime to to fetch the results and after sometime the request errors out saying that Query time out. Though the session remains active. Is there any paramter in instanceconfig to increase t

  • How to Set Display

    Hello I am trying to Run the adautostg.pl script perl adautostg.pl Invalid DISPLAY :0.0 setting. Please set the DISPLAY setting properly. The log file is located at /tmp/09010724/adautostaging.log Press <ENTER> to leave this session whn i check the l

  • Adding selection screen elements at run time

    Hi, I have a selection screen with four drop down list which has 20 elements. When i select any element from drop down, i must be able to add some other UI in the same line. DD1 DD2 DD3 DD4 If i choose a first item in DD1, DD1 Lable1 IP1 lable2 IP2 D

  • "Unreadable files" when importing photos into iPhoto

    OK, I just recently got a new iMac - my first time using iPhoto. All seemed well for a while... until I started to import my photos into iPhoto from my HD (which I had copied over from my old G3). The problem was that as I was importing some of the p

  • Reload mountain lion but not pay again

    hi my original hard drive crashed after i had installed mountain lion, related or not , i have fitted a 2TB unit and recovered to my original OSX , i now want to reload mountain lion that i paid for from Apple, but cant work out how to download it wi