Restrict the movement of cursors on xy graph

hello.
I have an XY graph, with values of 0-10 in X, and of 0-10 in Y. I have two cursors in the graph.
I do not want the cursor is out of the graph area of 10 * 10, I disabled the auto scale, but the cursor can get out of the area of 10 * 10.
I also hope that the value of X of the cursor0 does not exceed the value of X of the cursor1.
I hope you can help me with these restrictions on movement, thank you very much.

Hey there, If you want to restrict the value of the cursors you can use property nodes to do so..
Here is an example; you just need to get the value on X of the active cursor (0 or 1) and then compare those values; if the value is smaller; you can use a case structure and a property node to coerce the values.
Hope this info helps.
Greetings
Attachments:
Untitled 3.vi ‏11 KB

Similar Messages

Restricting the movement types...........URGENT ISSUE

Hi.. Every body,,,
Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
Myproblem is
i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
01---02 -
accepted
0201--
accepted
0103--
not accepted
0104--
not accepted
0203--
not accepted
0204--
not accepted
And 1,2,3,4 plants must transfer goods to vendor
i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
and in another role i was resricted comany code 3 and 4 with movement type 541 only..
If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
I don't have functional kw......This is an urgent issue.......please suggest how to restrict..

Hi.........T'X for responding imm....
But i have tried ,what u said , still same problem...please provide some more inputs...

Can i restrict a movement type with respect to storage location

Hi
Is there any way to restrict the movement type for a particular storage locations.
For eg.
If am using a Mvt 311 tP btwn storagelocations.
If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
Is it possible
Guide me
Sunil

Sunil
Please contact your BASIS security team , with the help of Authorization roles you can restrict
Reward if helpful
Regards
venu gopal

Restriction on movement type,storage location on USER ID

Dear Guru's,
I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
Kindly give ur valuable suggestion to resolve the issue......
With Regards.

HI
For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
So its a combination of SLOC & MVT tye. Try & give feedback
Shakti
Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM

Automatic Cursor Movement in one Graph, in accordance to the cursor in another graph

I am using two XY graphs each with 4 cursors. I want to assign each cursor of graph A to each cursor of graph B such that the corresponding cursors in graph B moves in accordance to the cursors in graph A.
I have used Active cursor, Cursor.PosX and it works for one cursor. However when I use the same concept to change the active cursor value and faciliate the automatic movement for all cursors they do not work.
Message Edited by Chathuri on 08-13-2009 06:26 AM
Solved!
Go to Solution.

Hi,
As requested I would like to post the solution as to how I tacked the problem. It was actually small mistake on my part. When I connect the two property nodes for each XY graphs I should connect ActiveCursor to ActiveCursor and Cursor.PosX to Cursor.PosX. What I did was connect the Active cursor of A graph to the cursor.index of B graph. I have attached a small screen shot of connecting the first cursor of A graph to the 1st cursor of B graph so that the cursor in B graph follows the cursor in A graph.
In order to connect more cursors as in my case, the only change to be made is the change in the Acitve cursor constant to, 1,2,......
Chathuri
Attachments:
CursorMovement.JPG ‏7 KB

Event Precedence - Mouse Move or Cursor Move on Graph?

Since LabVIEW 8+ introduced cursor events (grab, move, release), is there a conflict that would occur between a mouse move event and cursor move event since a cursor move involves a mouse move? Or, since the cursor move requires the left mouse button to be down, does that allow LabVIEW to differentiate which event is occurring? I have some code I am writing to draw a box on an intensity graph (using the new plot.images property for graphs) so as to extract a region of interest. At first, I want a cursor to follow the mouse as it moves over the graph. Then, I want to draw the box region when I grab the cursor (with left mouse key down) and drag it. Differentiation of these two event types will allow me to unambiguously accomplish this task.
Thanks,
Don

Moving a cursor will interleave mouse move and cursor move events.
However, you can easily keep state of mouse up/down to distinguish what to do in this particular case. See attached draft (8.20).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
eventqueue1.vi ‏29 KB

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

How to restrict the users not to change receiving batch no. in 305 mov.type

Dear MM Guru,
We are using mov.type 303 & 305 for transferring the materials from one plant to another plant. t.code is MB1B (Non split valued item)
While receive the goods through 305 mov.type the user having the chance to change the receiving batch number. To control this changes, is there a way where we can restrict the users not to do the changes in receiving batch no. or can we do the GR with reference to the material document 303 mov.type.
Regards,
Sivanandan

Hi,
Generally there is a possibility to change the batch no. If you want to restrict it means go for enhancement. Use BADI to acheive this.In MB_MIGO_BADI you can set not to change the batch no. Hope it works. Thanking you.

Restriction of Selecting Reason for movement based on the movement type

HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.

Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush

I changed something with my page, and now I have to move my cursor all the way up to the top to get the home, bookmarks or closing button

the URL line is also hidden until I scroll all the way up.

Sounds like you are in Full Screen Mode.
*F11 will toggle Full Screen Mode on or off.
*Another way to exit Full Screen Mode, when moving your cursor to the top of the screen, the toolbars will "slide" down; move your cursor onto a blank spot on one of the toolbars, right-click and click "Exit Full Screen Mode".
 
 
'''You need to update the following:'''
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

Placing a cursor in multiplot graph to display all values at the cusor location

We are currently using NI based DAq system which uses LABVIEW 7.1.We would like to know whether it is possible in LABVIEW 7.1 to place a cursor in a graph having multiplot that will disply all the values of parameters at the cursor location?

If I understand the question correctly, yes, LabVIEW can display many parameters of a cursor, including the cursor position (in X and Y coordinates), the array index of the point to which the cursor is locked, the line and point style and thickness, etc. You can also read or set how a cursor locks and whether a cursor is visible or not as well as other properties of cursors. All of this is done using property nodes in LabVIEW and can be done with multiple plots and multiple cursors.
TylerS
Applications Engineer
National Instruments

When i move my cursor to the top left corner of the screen, I am automatically logged off. Is it a software problem or is it a feature I can turn off?

When i move my cursor to the top left corner of the screen, I am automatically logged off. Is it a software problem or is it a feature I can turn off?

I don't think there is an option for logging off in the Hot Corners, but check Mission Control System Prefs, Hot Corners button. What is set in the top, left.

How do I remove the question mark on my dock? When I move my cursor over it it reads "photos".

How do I remove the question mark on my dock?
When I move my cursor over it it reads "photos".

Everything in the Dock is an alias.... that is a tiny file that points to the original app, folder or file.
If the original app, folder or file is missing or not accessible in some other way (deleted?), it displays a question mark.
You remove it the same way you remove any icon from the Dock.
Simply drag the icon up away from the doc a couple of inches and let go of it.
It should just disappear with a poof and some clouds.

To restrict the 202 movement if equipment not dismantled

Dear Experts,
I want to restrict the user to do the 202 movement on equipment material no. and serial no. if equipment has not dismantled.
Kindly suggest.
Regards,
Tushar

Hi,
Please use 'MB_MIGO_BADI'...it has a method 'POST_DOCUMENT' .Here you can get all the header and item level data....
Other User Exits:
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
You can get the Material & Serial Number from ITOB table from MATNR & SERNR fields respectively.
You can get the Equipment status from JEST table.
Use table EQUI, JEST & TJ02.
Regards,
Maheswaran.

Restrict the movement of cursors on xy graph

Similar Messages

Maybe you are looking for