Restricting by 0MAT_PLANT does not work

All,
0MAT_PLANT is a compound of 0MATERIAL and 0PLANT.
When I try to restrict a query by 0MAT_PLANT I am expecting that it's by Plant and material
Example:
Query with no restrictions:
0MAT_PLANT
001/1000123
001/1000124
002/1000123
002/1000123
Then when I restrict by: 001/1000123 I get the following
0MAT_PLANT
001/1000123
002/1000123
I was expecting this:
0MAT_PLANT
001/1000123
BW doesn't seem to hold the plant value in the restriction. Is there something that I can do to make this restriction work?
Thanks,
Chris

Bump

Similar Messages

Access Restriction on EA3500 does not work.

I tested this with my laptop by setting its access restriction/parental control to always not access the internet. But still my laptop can still search through wikipedia. Is this because of the router firmware? By the way I'm using the latest Connect cloud firmware. Thanks in advance.

I believe parental control is not really busted, it's just designed to work only with ipv4. What you can try though is to try the following:
Make sure that the laptop is only wirelessly connected to the router, because if the laptop was connected both wired and wireless then parental controls will not work since the laptop will be using two adapters.
Remove the entry under target devices, disable parental controls and save the settings.
Enable parental controls, add a target device, save the settings
Try to check if you can access wikipedia or other website because if parental control was working then it should add for a password
Try also to check the router's status tab if there's an ipv6 ip address because if there is, then parental controls will not work

My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?

There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup?

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

Hi there,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Additionally, you may want to try completely disabling and re-enabling restrictions.
-Griff W.

HT4113 ipad password is giving me problems, works on wallpaper to unlock but does not work for restrictions or reset

ipad password is giving me problems, works on wallpaper to unlock but does not work on reset or restrictions

You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Flash player does not work on Non Admin accounts

I have 2 citrix servers running Windows Server 2k3. Flash
installs and plays fine as the administrator, but once logged in as
a regular user. Flash does not work. I have set the security
permissions for the C:\Windows\System32\Macromed\Flash folder so
that non admin users can modify and write to the folder. That did
not work, flash asks to install, but when you click ok, it becomes
a red X. Any ideas?

Hi all,
Please see the following article that may address this issue:
http://www.adobe.com/go/624850b5
“After successful installation under the Windows
Administrator account, Restricted User accounts are unable to
display Flash Player content.”
This issue is never encountered with a new install of
Windows. It is sometimes encountered with older images and it is
strictly an issue with the ActiveX installer not for plug-ins.
Please reply to this thread with your results. If the
registry fix mentioned on this article helps, we will update the
document to reflect that it is still an issue.
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support.
http://www.adobe.com/support/contact/

Microphone does not work in Facetime

Hi
I read other posts and in Maverik I didn't find simmilar problem, for most people their microphone does not work after few minutes, but in my case, microphone does not work at all in Facetime, so I can hear the other end, but they can not hear me! This happened after updating Mavericks.
My Mac specs:
Macbook Pro 2013
OSx 10.9.1 (Mavericks)
things I already tested:
I tried to use headphone and without headphone, but it didn't make any difference
Microphone works fine in Skype and other softwares (Audacity, YahooMessenger, etc.)
Tried with WiFi and with Ethernet cable
Internet speed is 2.3MBps
Router's firewall does not have any restriction for certain ports
Tried turning facetime Off and On
Tried to call iPhone 5s, iPad2 and MacBook Pro each in different network and different countries!
... and finally searching internet for hours (which obviously came up with nothing)
I'll be thankful if somebody help me through, all suggestions are welcome, so please don't hesitate to post.

Same issue here....
8-core Mac Pro, Lion, Original External iSight camera connected via FireWire 400 through the FireWire jack on the 23" Apple Cinema Display.
Audio and video work fine using iChat and making video clips through any/all apps.
However, using FaceTime.....incoming audio and video are fine, outgoing video is fine, but outgoing audio is missing. Nobady can hear me.
Sorry guys...you can't doll this one up or spin it in any other direction......it's a bug pure and simple.
Feel free to fix it whilst you're dealing with all the other problems that Lion has.
....sT

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

Iphone 5c does not work rear camera (screen is black) and a flash light since yesterday. Maybe someone knows what happened.

Yesterday stopped working camera application turns on but the screen is black. It does not work too flashlight. It is gray in the control panel. Maybe somebody know what happened if I need to return my phone service warrants.

Hello szpryczek,
Thanks for using Apple Support Communities.
To troubleshoot issues with your iPhone camera, please follow the steps below.
Camera
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
If the issue persists after the previous steps, please click the link below to contact Apple Support.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take care,
Alex H.

"Open containing folder" does not work

After having hit the button "Open containing folder" in the download manager it seems that the computer is busy, but no window opens up.
I am using Windows 64 bit (all updates) and Firefox 3.6.12.
Same issue in uTorrent, so it's maybe Microsofts's fault?

venemovil, thank you for your reply.
Well, this behaviour is not restricted to a special folder. Regardless of where I save the file, it does not work. In the General tab I have set Firefox to ask me every time where to save the file. The folders are on different partitions and/or hard drives.
This occured immediately after installing Windows 7 64 (I have only installed the very most important programs).

Loading flash through ajax does not work in IE 6.

Hi all,
I am having some problems on a site I'm developing. When I
load a video from youtube, etc, and do so dynamically through ajax,
it does not work on IE 6. Mind you it does work on all other
browsers. This problem happens with multiple copies of IE 6 so it
is reproducible. Not sure if there are any web devs here but any
help would be greatly appreciated.

Well, this probably belongs over in the Flash forum. That's
where the developer questions go.. It's surely a matter of the way
the code is written (or possibly the paths to the different
components. There are security restrictions on certain types of
loading that may also come into play. Hard to tell without more
detail.

This program is well compiled but does not work.

I would like to know why this program does not work properly:
the idea is :
1. the user introduces a text as a string
2.the progam creates a file (with a FileOutputStream)
3. then this file is encripted according to DES (using JCE, cipheroutputStream)
4.the new filw is an encripte file, whose content is introduced in a string (with a FileInputStream)
(gives no probles of compilation!!)
(don know why it does not work)
here goes the code:
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import java.io.*;
import java.security.*;
import javax.crypto.*;
public class cuadro extends Applet{
     private TextArea area1 =new TextArea(5,50);
     private TextArea area2 =new TextArea(5,50);
     private Button encriptar=new Button("encriptar");
     private Button decriptar=new Button("decriptar");
     public cuadro(){
          layoutApplet();
          encriptar.addActionListener(new ButtonHandler());
          decriptar.addActionListener(new ButtonHandler());
          resize(400,400);
          private void layoutApplet(){
          Panel keyPanel = new Panel();
          keyPanel.add(encriptar);
          keyPanel.add(decriptar);
          Panel textPanel = new Panel();
          Panel texto1 = new Panel();
          Panel texto2 = new Panel();
          texto1.add(new Label("               plain text"));
          texto1.add(area1);
          texto2.add(new Label("               cipher text"));
          texto2.add(area2);
          textPanel.setLayout(new GridLayout(2,1));
          textPanel.add(texto1);
          textPanel.add(texto2);
          setLayout(new BorderLayout());
          add("North", keyPanel);
          add("Center", textPanel);
          public static String encriptar(String text1){
          //generar una clave
          SecretKey clave=null;
          String text2="";
          try{
          FileOutputStream fs =new FileOutputStream ("c:/javasoft/ti.txt");
          DataOutputStream es= new DataOutputStream(fs);
               for(int i=0;i<text1.length();++i){
                    int j=text1.charAt(i);
                    es.write(j);
               es.close();
          }catch(IOException e){
               System.out.println("no funciona escritura");
          }catch(SecurityException e){
               System.out.println("el fichero existe pero es un directorio");
          try{
               //existe archivo DESkey.ser?
               ObjectInputStream claveFich =new ObjectInputStream(new FileInputStream ("DESKey.ser"));
               clave = (SecretKey) claveFich.readObject();
               claveFich.close();
          }catch(FileNotFoundException e){
               System.out.println("creando DESkey.ser");
               //si no, generar generar y guardar clave nueva
          try{
               KeyGenerator claveGen = KeyGenerator.getInstance("DES");
               clave= claveGen.generateKey();
               ObjectOutputStream claveFich = new ObjectOutputStream(new FileOutputStream("DESKey.ser"));
               claveFich.writeObject(clave);
               claveFich.close();
          }catch(NoSuchAlgorithmException ex){
               System.out.println("DES key Generator no encontrado.");
               System.exit(0);
          }catch(IOException ex){
               System.out.println("error al salvar la clave");
               System.exit(0);
     }catch(Exception e){
          System.out.println("error leyendo clave");
          System.exit(0);
     //crear una cifra
     Cipher cifra = null;
     try{
          cifra= Cipher.getInstance("DES/ECB/PKCS5Padding");
          cifra.init(Cipher.ENCRYPT_MODE,clave);
     }catch(InvalidKeyException e){
          System.out.println("clave no valida");
          System.exit(0);
     }catch(Exception e){
          System.out.println("error creando cifra");
          System.exit(0);
     //leer y encriptar el archivo
     try{
          DataInputStream in = new DataInputStream(new FileInputStream("c:/javasoft/ti.txt"));
          CipherOutputStream out = new CipherOutputStream(new DataOutputStream(new FileOutputStream("c:/javasoft/t.txt")),cifra);
          int i;
          do{
               i=in.read();
               if(i!=-1) out.write(i);
          }while (i!=-1);
          in.close();
          out.close();
     }catch(IOException e){
          System.out.println("error en lectura y encriptacion");
          System.exit(0);
     try{
          FileInputStream fe=new FileInputStream("c:/javasoft/t.txt");
          DataInputStream le =new DataInputStream(fe);
               int i;
               char c;
               do{
                    i=le.read();
                    c= (char)i;
                    if(i!=-1){
                    text2 += text2.valueOf(c);
               }while(i!=-1);
                    le.close();
          /*}catch(FileNotFoundException e){
               System.out.println("fichero no encontrado");
               System.exit(0);
          }catch(ClassNotFoundException e){
               System.out.println("clase no encontrada");
               System.exit(0);
          */}catch(IOException e){
               System.out.println("error e/s");
               System.exit(0);
          return text2;
     class ButtonHandler implements ActionListener{
     public void actionPerformed(ActionEvent e){
          try{
          if (e.getActionCommand().equals(encriptar.getLabel()))
               //     area2.setText(t1)
               area2.setText(encriptar(area1.getText()));
               //area2.setText("escribe algo");
               else if (e.getActionCommand().equals(decriptar.getLabel()))
                    System.out.println("esto es decriptar");
                    //area2.setText("hola");
     }catch(Exception ex){
          System.out.println("error en motor de encriptacion");
               //else System.out.println("no coge el boton encriptado/decript");

If you don't require your code to run as an applet, you will probably get more mileage from refactoring it to run as an application.
As sudha_mp implied, an unsigned applet will fail on the line
FileInputStream fe=new FileInputStream("c:/javasoft/t.txt");
due to security restrictions. (Which, incidentally, are there for a very good reason)

VPD context_sentisitive policy does not works as expected

Hi,
I'm trying to implement CONTEXT_SENSITIVE RLS policies:
http://docs.oracle.com/database/121/ARPLS/d_rls.htm#ARPLS67721
Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor. For session pooling where multiple clients share a database session, the middle tier must reset context during client switches. Note that the server does not cache the value returned by the function for this policy type; it always executes the policy function on statement parsing. Applies to only one object.
What I have discovered so far:
1. policy function executed each time when query executed from SQL*Plus. Independently of context changes.
2. policy function executed only once when query executed from PL/SQL.
3. When we have a PL/SQL procedure like this:
begin
<query>
<change context>
<query>
end;
Additionally, query (cursor) is not present in PL/SQL cursor cache, then
policy functions executed only once when first query executed.
So wrong results are possible when application context changed in a way that policy function returned predicate also changed.
4. JDBC: policy function executed each time when query is executed. Policy function executed only once when I enabled statement caching:
OracleDataSource ods = new OracleDataSource();
// skip
ods.setConnectionCachingEnabled( true );
ods.setImplicitCachingEnabled( true );
Properties cacheProps = new Properties();
cacheProps.put( "InitialLimit", "1" );
cacheProps.put( "MinLimit", "1" );
cacheProps.put( "MaxLimit", "5" );
cacheProps.put( "MaxStatementsLimit", "50" );
ods.setConnectionCacheProperties( cacheProps );
5. Queries with RLS policies are not cached in the session cursor cache. For example, if we executed same query multiple times in SQL*Plus - then this query will be not cached.
2 and 3 (PLSQL) relates to PL/SQL cursor cache.
As a result, when we disable PL/SQL cursor cache (setting session_cached_cursors=0), then policy function executed each time in PL/SQL.
What I have observed, it is not agreed with documentation on context_sensitive policies (I provided a link above):
Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor.
Signature of DBMS_RLS.ADD_POLICY procedure was changed in 12c with additional arguments: NAMESPACE, ATTRIBUTE.
I tried to use them with no luck, results are the same.
In my opinion statements below are contradict to each other:
1. Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor.
2. it always executes the policy function on statement parsing.
First, documentation says that the policy function evaluates at statement execution time.
Second, documentation says that the policy function executes on statement parsing.
I have used Oracle Database 12.1.0.2 for testing.
I provided a script that I have used in my tests:
rls_policy.txt - creates test schema and policy
rls_sqlplus.txt - runs simple select against query with RLS policy
rls_plsql.txt - more complex example, runs some anonymous blocks with queries against table with RLS policy.
In my opinion, context_sensitive policies does not works as described in the documentation.
Is it a bug or I'm missing something?
Please advice.
Best regards,
Mikhail.

Thanks Scott. May i know why i should never use user policies for denying access?
From my readings on some articles, there is no way to deny users permission in sharepoint after granting domain users with read access other than the web application user policy in our case (with certain reason, we need this group to be granted with
read access but we would like to restrict small amount of users from seeing the page)

HT5594 I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

Restricting by 0MAT_PLANT does not work

Similar Messages

Maybe you are looking for