Restriction for Migo if import custom miro is not done.

Dear Consultant ,
I want to put restriction over migo for import PO.
If the custom duty miro is not done , it should not allow /restrict user for migo.
Kidnly suggest user exit or badi or any other solution for the same.
Thanx
Pradeep

The only problem with these notes is that it will not validate if custom duty invoice is passed? In case freight invoice is passed it considers that also as a valid document .
As suggested in the note you can use BADI: J_1IEXGM_BADI_LINE_MODIFY in that enhancement spot ( around line 996-997) and add the validation of in EKBZ for that PO, KSCHL= " custom duty condition" and it should give error message if invoice does not exist.
This logic will work if invoice is posted for the full qty.
Other wise you can use user exit and badi as suggested by Ajit , MB_MIGO_BADI, exit mbcf0002. in that logic if custom duty invocie is posted ( check in EKBZ- kschl= " what ever you custom duty conditions are for that EBELN and EBELP). If no then throw error message.
Regards
Sangeeta

Similar Messages

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

Without QM module, for materials is in Quality, Miro should not happen

Hi All
without QM module,
After GRN the material is going to quality inspection.
For such Purchase Orders, I want to restrict the invoice verification process.
system should give error message.
Regards
M S K

Hi,
Through QM module you can block the invoice for payment but you can't stop the posting.
Do the settings in SPRO > Quality Management > QM in logistics > QM in procurement > Define delivery block, here block invoice option is there.
But in standard SAP, you can't control the Invoice posting through QM.

BAdi FMBW_CUSTOMER for Screen 2010 with customer subscreen does not update?

Greetings,
Trying to implement this BAdi (FMBW_CUSTOMER) but it doesn't update the FMBH customer defined fields.
It seems to do OK in the PBO - meaning it gets the correct data from the dB table.
It seems to recognize the PAI custom fields - it comes back with the correct user input.
But in the end - I can't get it to update the table.
Anyone been able to get this BAdi to work?
P.S. I have read the documentation for it and have spent extensive time in debug.

Hi,
Create structure CI_FMBH with your added custome fields and see whether those fields are available to you at the time of save......
Thanks,
Shailaja Ainala.

BADI or EXIT for MIGO

Hi,
I need a BADI or EXIT that is executed AFTER TO POST
Goods Receipt from Purchase Order
(101 Goods receipt for purchase order into warehouse/stores)
for transaction MIGO
I try with MB_MIGO_BADI, MB_DOCUMENT_BADI AND EXITS but are
executed before the post.
Thank's.
Mariano.

Following are the exits available for MIGO.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
Thanks,
Santosh

User exit for MIGO - Change on Posting A/C Code Upon Saving.

Hi,
I have a requirement to to split the GR/IR clearing account during the posting of goods receipt in MIGO by filled in BSEG-HKONT with specify a/c code (hard coded).
I'm not able to find any user exit to change the value in BSEG-HKONT
while click on save.
Is there any suggestion on it?
Thanks.

Hi ,
Try with the following User Exits for MIGO.
MB_CF001 Customer Function Exit in the Case of Updating a Mat. D
MBCF0002 Customer function exit: Segment text in material doc. i
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREA
MBCF0011 Read from RESB and RKPF for print list in MB26
Thanks,
SVREDDY

Specifics for Migrating All Important LR files from Win7 64bit to new iMac (September 2012)...

I see one or two specific threads about this sort of thing, but the most recent I see is 2008.
I will be migrating from a Win7(64) installation to a new iMac in the very near future. I will be using a new install of Lightroom 4 on the new iMac.
Would someone please point me to a step-by-step guide for migrating the important stuff so that I don't lose files or catalogs?
Thank you in advance. I get my new iMac on the 17th (or the next possible day off I have after that).
Glenn Calvin
gcalvin.com

Here you go:
http://www.lightroomqueen.com/2009/02/28/how-do-i-move-lightroom-to-a-new-computer/
http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer
John

How to do custom miro for import purchase ?

Hi All
I want to know what is the process for doing custom miro for import purchase, In my case for some of the excise elements we get credit, so while doing miro how to take care of this ?
Thanks Rashid.

Hi,
CVD Account has to be enter in Co cd setting and Excise default setting as per your Tax procedure if it isTAXINJ then JMOD as default excise value for CVD there fore system identifies the CVD as BED( Basic excise) which you can avail credit.
1.Basic customs duty (JCDB) 10% - Material cost
2.Education Cess on BCD(JEDB )-2% - Material cost
3.Secondary edu cess on BCD(JHCS )-1% - Material cost
4.CVD (JCV1)-- Credit
5.EDU CESS FOR cvd-2% - Credit
6.SHE Cess on CVD(J1CV )-1% - Credit
7.Add duty of customs(JADC) 4% - Credit
Cycle for Import PO
Import Purchase order: In PO you have to maintain the Custom duties
1Customs duty (JCDB) 10%
2Cess on BCD (JEDB)-2%
3Secondary edu cess on BCD (JHCS)-1%
4.CVD (JCV1)
5.EDU CESS FOR cvd-2%
6.SHE Cess on CVD(J1CV )-1%
7.Add duty of customs(JADC) 4%
You have to enter local custom vendor for above condition type in PO, One main or material vendor which you enter at the top of the PO
Then against the 7 condition types the customs (Local) vendor should be given (i-e) you have to select the condition type then click on the lens icon & give the customs vendor,
And should have zero tax code in PO
2 MIRO for Custom Vendor by selecting planned delivery cost.
3. Capture Excise Invoice against Commercial invoice (MIRO document no)- J1IEX
4. MIGO u2013Goods receipt
5. Post Excise Invoice- J1IEX
6. MIRO for Import Vendor
7. Final payment

MIRO MIGO ENHANCEMENT FOR INDIAN SCENARIO - IMPORTS PURCHASE ORDERS

ENHANCEMENT IN THE MIRO ACTIVITY. IN INDIA YOU HAVE TO POST 7 CUSTOMS CONDITIONS FOR EACH ITEM. MIRO ACTIVITY IS COMPLETELY MANUAL. ALL THE 7 VALUES, QUANTITIES FOR 7 CONDITIONS ARE TO BE ENTERED. CAN THIS BE IMPROVED TO HANDLE IN A BETTER WAY.
MIGO ACTIVITY FOR MANUFACTURING SCENARIO THE EXCISE VALUES ARE SET OFF WHICH ARE RETRIEVED BUT FOR TRADING SCENARIO WHERE THE EXCISE CONDITIONS ARE CUSTOMISED [ZCV1, ZEC1, ZEC2, ZAD1] TO LOAD ON INVENTORY THE EXCISE VALUES ARE TO BE ENTERED. CAN THIS ACTIVITY BE ENHANCED SO THAT THESE VALUES COME DIRECTLY FROM THE MIRO FOR DUTY POSTINGS WHERE ALL THE VALUES ARE ENTERED
BEST REGARDS
PANKAJ

Hi,
In a normal import process, before the goods receipt, you are making invoice verification for Customs using MIRO and using Planned delivery costs as an option.
As the goods receipts doesn't exist, system is not proposing Customs conditions
As the goods receipts quantity is unknown and there always a possibility of partial invoice verification for the customs, system will not directly populate the values in MIRO.
Doing enhancements to populate this values may not be needed. Pls convince the user on the import process.
Any other option available for that, really dont know
Thanks

Restriction for Miro qty excess than PO Qty ( Import Po )

Hi ,
We have new requirement for import PO
While doing advance Miro against import PO ,system should not allow miro more than PO qty or PO value .
Please let me know , if any badi or user exit can be used in this...!
Thanks ,
Pradeep

Hi,
Go to OMRM and set the message 087 (Invoice quantity greater than PO quantity) (item without GR) as an error.
also you can set message 504 (Quantity invoiced greater than goods receipt quantity) as error message
Regards,
Manish Jain

To stop preparation og MIGO before Customs MIRO in Import procurement

Hi,
Can anyone help me . I want to restrict preparation of GR before the Customs MIRO is prepared. Is there any settings or is there any way by which Gr will not be allowed t be prepared before customs Invoice is posted.
gautam

Hi
You can try it with badi MB_MIGO_BADI, methods CHECK_ITEM and CHECK_HEADER.
Regards
Eduardo

In Import Purchase - GR Accounitn Entry Varying From custom MIRO

Hi SAP Exeprt,
Sensing abnormal behaviour of PRD client in case of Import Procurement.
which are as follow;
Import PO with Exchange rate ( 44.17) Multiple items. Exchange rate is not fixed in PO ( transaction flows are as such)
1. Custom MIRO for 5 Qty. in INR where Accouting Entry are as such;
Vendor                      10000 C
Custom Clearing       9100    D
Custom Clearing        600      D
Custom Clearing        300      D
2. GR   for 5 Qty. w.r.t PO & Commerai lInvoice ( MIRO Doc. No.)
Stock Account                                69570( INR)     1119.20 D (EUR)
    GR/IR                                          58000                    933.07    C
Custom Clearing                            10300     165.70    C
Custom Clearing                                850     13.67      C
Custom Clearing                                420     6.75        C
Here My MIGO Clearing account should get match with MIRO Custom Clearing Account, which is not haaping, even though exchange rate from OB08 is also not matching.
I am not able to , how & on which parameter system is calculating material value in EUR as well as in EUR.
As per the Standard practice, AT GR Level. Stock Account will be posted as per PO Material Value in Foreign Currency & in INR coversion from OB08 Table. Custom Clearing calculation as per Custom MIRO Clearing Value & in turn INR Value will be converted in Foreign Currency.
Note: For 1 Qty, System is calculating as per SAP standard but for Multiple qty, System is generating wrong accounting entry while posting GR.
I have simulated it on Quality & Development client , systen is working fine in both for 1 Qty as well as for Mutliple Qty case.
Dear Experts help me to resolve this issue.
With Regards,
Manoj K.

I am not able to , how & on which parameter system is
calculating material value in EUR as well as in EUR.
Check SAP Note 518114 - FAQ: Goods movements in foreign currency
From your account postings of GR,Customs miro
Customs miro entries are ok,In GR customs a/c entries reflecting duties
which are not taken credit will add to material value.
Note: For 1 Qty, System is calculating as per SAP standard but for Multiple qty,
System is generating wrong accounting entry while posting GR.
Take help of FICO consultant why acct. entries were wrong,
Check any transport requests which were not moved to production,
since it is working fine in other two clients.
Can you tell me how much GR qty will receive every time & also for customs clearing qty ?
Edited by: Jeyakanthan A on Nov 15, 2010 10:13 PM

Table to Know MIRO for mat. doc.(MIGO) incase of GR based IV not checked PO

Hi,
I need your help to know the logic for developing one report in the below situation.
there is a Imported PO. GR Based IV is not checked.
initially customs MIRO has done it,
later inbound delivery taken,
then MIGO 103 movement done,
while doing 103 Mvt, system is asking commerical Inv No and Year. I have given the customs MIRO No.
later 105 mvt done. at this time inventory valuation and taxes and duties captured based on the Customs MIRO.
At this time, i want to know the customs MIRO No. against GR No (i.e., Material Document No.) Any table will provide this information.
Regards,
S Vasu

Dear Ramana,
Thanks for your reply. i already verified this EKBE table, it is giving only mateirla documents information, it is not giving any of the customs miro nos.
Please advise any other tables will help us.

Custom Miro Popup in MIGO.

At the time of preparing 105 MIGO of local purchase. We get field of Custom MIRO in local purchases. In previous same transaction we did not get such field of custom MIRO.How this popup of custom MIRO comes?
Edited by: Pritesh kumar on Aug 17, 2010 4:17 PM

HI,
Go to XK02 in vendor change, after that in purchase view, check there....
in Schema grp that vendor has the import schema grp or not ?
if yes...then change to local schema grp..
Hope Help U !
Regards,
Pardeep malik

CVD Values Not Capturing in MIGO after Customs MIRO

Hi,
I am getting problem in Import procedure.
We created Import Purchase order as normal means Main Vendor in Foreign Currency and Customs Vendor in Indian Currency.We assigned same in PO.
After creating PO we did Customs MIRO in Indian Currency.
But at the time of Goods reciept System not defaulting BED(CVD) and E cess(e cess on CVd) and SHE(SHE on CVD)
but ADC is their.
In MIGO we entered Customs invoice Number.we are mentioned Excise default settings.We are using TAXINN.
ECC 6.SAP_APPL 11.
In my Import Pricing Procedure we are assigned Account key and accurals.
Please any body know the SNOTE number reply me.
Thankyou,
Raghu

Dear Raghu,
In case of Import I m facing problem.My base is coming wrong.
I am not getting the Value which I had entered in MIRO.
ADC isn't flowing.
In Imoprt pricing I have takne JADC & in Excise default I have maintained the condition also.
Can u p. tell me ,How did u resolve the problem ??
Regards
Biswajit

Restriction for Migo if import custom miro is not done.

Similar Messages

Maybe you are looking for