Result Recording as DATE

Hi All,
A requirement from my client hasd put me in awkward condition.
I need to record result as DATE. Because as per the testing protocol of all hte materials mfg date and expiry date.
E.g. For the insepction plan for Incomming Raw material (Inspection lot against GR), "Manufactring date" and "expiry date" are two MIC for my operation "Sampling" of the inspection plan and I need to record the result as date.
Is there any way?? Pls provide the details.
With Best Regards,
Shyamal Joshi.

I am very much thank full to both of you for your such a valuable inputs.
Dear Craig,
The need to record the result as Data is required because here we had a need where the "Data" was a part of inspection specification.
e.g. It was demanded that "Mfg Date" for the delivery and consignment, is to be checked by the Quality inspector and to be filled in the report. So hence we can fetch it through the Batch itself, but to mentioned that the inspector has checked the Mfg Date, and well documented it, we had to keep a MIC in the Inspection plan.
So as a solution what we have done is........
- Created an MIC as "Mfg Date".
- Attached in Inspection plan, as Quantitative MIC. Didn't entered any Limits to it.
- In the result recording screen, the is field named as "Inspection Description", technical name "PRUEFBEMKT". Where it allow us to insert a free text up to 40 Characters.
- To make this mandatory while result recording, keep the Control indicator, "Documentation Required" active in the second page of the control indicator, for the MIC.
This way we somehow found the reciprocal solution for the same.
Regards,
Shyamal

Similar Messages

How to populate new record on data entry form based on search results?

Hello,
I'm new to jdeveloper im using version 11.1.2.1.0.
Usually Im using forms 10g.
I created search panel with table and its working but problem is how to transfer/populate all the field value according to that search result to New data Entry Form
by clicking the table record or a button.
Given :
TABLES,EO
1. PatientMasterIndex
2. PatientTransactionMaster <<---- master
3. PatientTransactionDetail <<-- detail relation
Here the scenario,
After Search of any patient, when i clicked one or more patient (which Jdeveloper allow multi select on jtable) on the table record it should automatically transfer or copied to the text field, i want to show on the form of PatientTransactionMaster like PatientNumber,PatientInsuranceNumber etc. to be save on db as new record, also non database field for view only like patient Name,address,age.
IN forms i can do that by :PatientTransactionMaster.PatientNumber := :blocksearch.PatientSearchNumber ,etc.....
or an item trigger to populate the said PatientTransactionMaster block. ( select .... into :PatientTransactionMaster.PatientNumber,etc....)
Any suggestion,links,sample is highly appreciated.
Sorry for my english.
Thank you very much

Hi,
Do you want to create a detail record that will include some values from your master record??
Or do you want to create a record with values from your Search criteria, only in the case you do not have any results?
if it is the second case.
When do you want to do that? After a press of button? or immediately?
In general you have to handle the values from search criteria.
Additionally, if you use ViewCriteria, you have to have bind variables for your search criteria that you will want to use.
So in general, you have to know the values by using bind variables, understand that the query has no results (This can be done in many ways, depending on your implementation. if you are using a button, you could make a disable condition with iterator.estimatedRowCount property.)
Perform the insert operation with the values from the bind variables.
Regards,
Dimitris.

Recording Dates in Results Recording

Hi.
I have an inspection with a task list. Several samples will be tested each time an inspection lot is created. I have a number of MICs that are quantitative / calculated to determine results of lab testing - this is all working great. The problem is that for each of my samples I need to be able to document general information about the sample. The types of information that needs to be documented are, for example, dates and sample numbers (not serialized using SAP).
Primarily these dates need to be used to generate date range specific reports of the lab results. It is for this reason that I do not want the users documenting dates in the inspection description field in results recording.
Does anyone know if using the QM_INPUT_PROCEDURE BAdI can the result field of a quantitative MIC be formatted as a date? Or has anyone had a similar problem that they have been able to solve? Is Sample Management / Physical Samples the direction to take?
Thank you very much in advance,
Cristin

Ok. Here's one way around this.
You can read this post:
http://sapfans.com/forums/viewtopic.php?f=27&t=14682&p=43885&hilit=datecharacteristicinspectionlot#p43885
But basically you use numeric MIC and the date is recorded in the form yyyymmdd. So for today it would be 2010622. You can even set a spec range at the begining of each year. So the range would be 20100101 to 20101231. This could help cut down on typos as well.
This number then gets copied to the batch record to a linked hidden numeric characteristic. A dependency is used to convert the number to the appropriate date. The dependency then updates a second characteristic with the date. It is this second date characteristic then that you can use in your reports. If you want to make sure the date formatted characteristic is changed due to additional testing or sampling you can include an IF NULL or an IF INITIAL statement in the dependency so once the characteristic has a value, it wouldn't be updated if the dependency was called again.
I am guessing each blood donation is being set up as a separate batch number.
FF

Change Results recording date

Hi,
I am using QE51N for results recording. I want to change the results recording date for inspection type 14. Is there any BADI or user exit to do the same.
Thanks & Regards
V. Devaraj

There is no user exit to change the Result recording date.

QM "Origin of Results Data" while results recording

Hello there,
We wish to record few characteristics value directly in the batch classification and wish the same to be copied in the associated inspection lot MIC.
In the results recording (QE01), Record Results : Characteristics Single Screen, there is a ResDatOrigin field. According to the documentation, the results data origin is the source from where the results are copied. One of the option contained there is Batch Valuation.
We wish to use the Batch Valuation option to meet our requirements. If you can share any alternate way to achieve the results copying to inspection lot characteristics from batch characteristics, that will be great as well.
Thanks a lot in advance. Please do share whatever gems you have. Highly appreciated.
Regards,
Kundan Kumar
PS: One of the statements contained in the help is: They (Results Data Origin) are for information purposes only and have no controlling function.

Hi Craig,
Yes, we are not in GLP environment.
We wish to keep our data entry options simplified and hence the request. There are a number of inspection parameters, along with batch parameters, which are recorded at our production operations. We have an effective way of entering batch characteristics values by "Fast Entry of Characteristics Values" by IS-MILL. We do not wish to re-enter the same data in inspection lot again.
We wish the data in inspection lot to be copied from the batch characteristics. The QM inspector can optionally change the results, which will then be copied back into the batch characteristics.
This will allow us to do analysis on QM related parameters with appropriate controls and simplified data entry.
If development is the only answer, what will be the best way to go around for same. Which possible issues to keep eye upon.
Regards,
Kundan

VALUATION NOT APPEARING IN RESULT RECORDING

Hello....
I have created an inspection plan where i have assigned all the characteristic to be inspected with quantative data.
Upon goods receipt inspection lot is generated,
while doing result recording when i enter the result for eg. if the characteristic value is 1-10, and i enter the reult as 1, the valuation has to be set automatically as accepted but its not appearing, could anyone please let me know am i missing any settings.
Suggestions will be worth appretation

Hi sarfrazbaig ,
If you are using sampling procedure, check the "Valuation Mode". It must be "Manual Valuation" to achieve the valuation Manually.
The trx code will be QDV1/2/3 for Sampling procedure.
Regards,
Shyamal
=================================================================================
Okey if you are not using the sampling procedure then,
Set the value as "Automatic Close" / Close, Navigate and save automatically" in the IMG settings at Quality Management->Basic Settings->Maintain Settings at Plant Level, here for the relevant plant select the "Result Recording" Tab and set the mentioned vales for the field "Recording configuration"
Revert for for further inputs.
Regards,
Shyamal
Edited by: Shyamal Joshi on Aug 12, 2009 12:24 PM

I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

Hello All,
I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8 but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio. I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
Somebody please help. Thank you all in advance for ANY ideas you might have!

Blues Piano,
I'm not sure if this will be a help or not. I'm so Logic Pro wet behind the ears that I make newbies look experienced. However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip. While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old. I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU. I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track. Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter. Then I can select my external MIDI device in that Port selector.
I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force. To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities. To do that I right click on the track and select "Select All." Then I right click again and select "MIDI" then "MIDI Transform" then "Velocity Limiter." In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc.
I hope this helps. I envy you your Mason & Hamlin. If you need more help on this just email me at pfleischmann at mac dot com.

Function to return a value of a object based on last record by date

Post Author: Tned
CA Forum: Desktop Intelligence Reporting
Can anyone assit with a method/formula to return the a value of an object based on the last record by date. BO 5 or XI. See example below. Query structure is not an issue. Only need help with the last record function or aggregate.
Data Table
ID / Serial #
Date
Status
Condition
Abc1
01/01/08
1
A
Abc1
01/02/08
1
Z
Abc1
01/02/08
3
Z
Abc1
01/04/08
2
D
Abc1
01/05/08
5
E
Abc2
01/01/08
1
F
Abc2
01/02/08
2
Z
Desired query results. Only the values of the latest records returned.
ID / Serial #
Status
Condition
Abc1
5
E
Abc2
2
Z

Post Author: Tned
CA Forum: Desktop Intelligence Reporting
Thanks Prashant
However, when i add either the status or condition variables to the report all lines related to the ID are returned not just the last entery by date.
Thanks again.Terry

Table for Original Values in Results Recording

Hi,
Where are the original values of the results recording of the inspection lot (inspection type 04) stored?
Or, is there any function module to fetch this data?
Regards
Ramakanth

it's in table QASE
original value (Data Element- QORIGINAL_INPUT )

Result recording - Integration with external software

Hi,
Inspection is done using the external software & the results are stored in the external database.
How can we transfer the inspection results in QM Result recording?

Hi,
For the upload to the SAP-System, the function module BAPI_INSPOPER_RECORDRESULTS will be used with the following mandatory input parameters:
-     Inspection lot number
-     Inspection operation number
-     Inspection point number
-     Partial lot number
-     (SAP-)batch number
-     Characteristic results (for characteristics with summarized result recording)
-     Single results (for characteristics with original result recording).
The transfer between subsystem and QM is done asynchronously. The mapped result data will be send as IDoc to the SAP system, or via direct call of the BAPI_INSPOPER_RECORDRESULTS via RFC.
If the data is send as IDoc, the BAPI-ALE interface must be setup to process the BAPI_INSPOPER_RECORDRESULTS at receipt of a new IDOC.
Kindly contact with your ABAP'er for further process.
Thanks & Regards,
Srinivas.D

Requirement of displaying inspection method in result recording

Dear All,
My clients requirement is to have the inspection method code in the result recording screen. I have the option of inspection method short text in the result recording screen. But i want a code should appear so that user can see the same for his convinient reference.
Regards,
Anil

Dear Anil,
You can create attachment in word of whatever data you want to maintain for inspection method. you can also save drawings in this attachment. assign this attachment to inspection method .You can assign attachment by
Service for Object=> Create=>Create Attachment
Now this attachment u can view while doing result recording & parallaly u can record results. Hope this will help you.
Regards
Amit

Usage decision vs result recording.

Hi All Guru,
I am new in QM , was MM & PP support. I am confused here about the usage decision vs result recording.
I do understand in QM there's inspection lot , in order to release the inspection lot , i should released the UD.
So what's the different between this both ?
Can i have inspection lot without result recording ?
Or can i have inspection lot without UD ?
Please help to clarify my confuse.
Thank you

Hi Crag ,
Thanks for understand because i am totally new in QM.
I won't use QM for Notification here. I will use QM for stock transfer & QM in Delivery before PGI.
As i know the basic requirement of QM
Setup the Master Data (QM View & all QM relavant data) ---> Type of inspection (which will determine which type of inspection to carry out ) -----> Inspection Lot Configuration --->Configuration for UD ----> Configuration for COA.
Master data that which required
Material master QM view,
Master inspection characteristics,
Task lists or inspection plans
Code, Code groups and Selected sets.
Quality info-record
My Question :
By having the above setup and configuration , without result recording can i have the COA to print out for either Post Process Inspection (Final FG) or Inspection at Delivery ?
With the Master Data which i mention as above , is it sufficient for me to activate
Post Process Inspection (Final FG - QM PP)
QM Inspection at Delivery (QM /SD)
QM stock transfer with inspection type 08.
Hope to hear from you.
Thank you

Addition of user defined fields in Results Recording screen (QE01)

HI All,
We've a business requirement to add user defined fields in results recording screen (Character Overview screen - QE01), so that the user will enter data in user defined fields during results recording. and the data entered in user defined fields should be saved in data base table along with actual results given by the user in order to retrieve data for reporting purpose.
Please suggest valuable solutions to acheive the requirement.
Thanks & regards,
rajesh

Hi Sujit,
Thanks for your reply,
We've tried using the " QEEM0029 User-Exit for Characteristic Overview Subscreen , however with "QEEM0029" exit, we are only able to add fields to the characteristics overview screen and there is no provision in this exit to save the data entered in the user fields to a table (QALS,QAMR, QASE).
Please suggest!
Thanks & regards,
rajesh

Decimal places display at the time of results recording

Dear All,
Please i faced one problem, At the time of results recoridngi/.e,
In my insp. plan i defined Quantitative specification as 70.0 with '1' decimal place in Qunatitative data. but after results recording it displaying one more decimal place excessi.e., as 70.00. How can i solve this problem, due to what this problem is occure. Please if any, solve its urgent.
Regards,
Vijaya

Dear Vijaya,
While entering Inspection Characteristics.. There is a field called DecPlaces on the right. its the 24th field on the item table.
The field comes after
Method, Insp Method plant, Version, Sampling Procedure, Sample Unit of Measure, Base Sample Quantity, SPC Criterion, Modification Rule, Test Eqpmt, Test Equip Short Text, Par Sample, DecPlace, Unit of Measure, Target Value, Lower spec Lmt, Upper Spec Lmt... and so on...
Regards
Vijay

Results Recording through QE 11 - Determine one MIC w.r.t another MIC

Hi All,
While doing Results Recording through QE11, one MIC (Say 'T') )needs to be automatically calculated ,whereas it was manually entered until now.
The value for 'T' should be picked from some Z table depending on some key fields , of whiich another manual MIC (say 'A' )value is a key field.
I can create the Function module and assign it to the MIC in formula. But I am not sure how to pick up the value for MIC 'A' at run-time.
Before saving itself, when 'calculate' button near 'T' is pressed, the FM should be triggered and it should use the value for MIC 'A' for picking value for 'T' from Z table.
Please advise if any FMs/BAPIS are there or any other method.
An F1 at 'A' yielded field QAQEE-SUMPLUS in 'Result' field and QAMKR-ORIGINAL_INPUT from 'Orig. Val' filed of which both are structure fields.
Thanks,
Neethu

I'm a maybe little late, but i will try to explain my own problem.
I'm also working for QM.
I want read data from QAQEE-ORIGINAL_INPUT and i cant and i did succed when i going to see inspection report.
I just have to make some marks in field Accessories for report and u will get data from this field.
But, if i want to read the same data in another place in sapscript i have problem.
It simple i cant get data from structure, is this because the program for form is writen for specific point when it must be write out?
Sorry for my english.
Tnx.

Result Recording as DATE

Similar Messages

Maybe you are looking for