Retrieve account members with time balance of "last"

Hi everyone,
I am trying to write a report scripts that will retrieve from the Accounts dimensions all members that have Time Balance of Account information of "Last". I haven't been able to get the correct syntax to do this retrieval. Is there an existing syntax what is similar to a UDA that I can use as a retireval criteria?
Any help will be greatly appreciated!
Thanks,
Tom

I dont think there is a such report script command to list out TB First/Last account members.
so you need to give some uda to the TB members and list out the accounts based on UDA in report scripts.
- Krish

Similar Messages

VENDOR/GL/CUSTOMER ACCOUNT STATEMENT WITH OPENING BALANCE

Can anybody tell me the tcodes in SAP for Vendor/Gl/Customer Account Statement with opening balance.
Best Regards,
Sudhanshu Dang
0124-3081015

hii
As per my knowledge no such reports for GL are there in sap.. we also had a same requirement but could not find it... we wanted reports with opening and closing balalnces...
u can go to SAP1 and check all the standard reports available. check wheather any report fulfills ur need or else go for abap reports...
Check f.42 T code for Vendor Report. and s_alr_87012172..for customer.
thanks
sejal

How to delete account members with no data (EPMA)

Hi all,
I loaded an account hierarchy coming from SAP in EPMA and now that I have the data into my cube I need to remove all the branches which bottom have no data. I have a list of all used account, and the EPMA ads file, how would you approach this problem? At the moment the Account is a Sparse dimension which all non-bottoms are dynamic, I would like to have some tips before start approaching the problem in some weird way..
Thank you,
bidi

You could just go into EPMA and remove those members from the Dimension Library APPLICATION Pane (The one in the middle that appears when you are exiting an app) by right clicking and "Excluding" from the hierarchy.

Time Balance and Account Type

According to docs, time balance are system-defined based on account type. However, I can set any time balance. And it not enfore time balance setting on app validation and deployment.
So, is any relationship between account type and time balance?

Hello,
Check this forum, see if that helps..
Time Balance is set to Last for EPMA Essbase application in Essbase Outline
The last post in the above thread might be helpful.
Thanks,
hyperionEPM
Please mark answer as helpful or correct for others to find it easliy.

ASO Time balancing with multiple hierarchies

Hello,
I have an Essbase 9.3 ASO cube with multiple hierarchies in the period dimension (set as type = Time), and I'm trying to set one of my Measures to Time Balance Last with SkipMissing.
When I validate the outline, I get:
"This prototype must have all its shared members as siblings of previous sibling."
on all the leaf level members in my period dimension.
any ideas?

We are on Essbase 9.3.0.1 and also tried to use ASO Time balance functions in conjunction with multiple hierarchies enabled.
I recommend you not to use the ASO time balance functions. We did and had to revert everything after complaints from our user base.
If you still use it, please test cases where you retrieve TB Last as well as flow values together with ytd and periodic values.

Planning - Time Balance Last Weirdness

Hi,
In my planning (Workforce) build I have some FTE accounts that are specified as "Time Balance Last" for aggregation purposes. I am wondering how this is supposed to work because it seems t be a little bit clumsy the way it is working in this build. My Period Dimension is Jul, Aug, Sep.....Mar, Apr, May, Jun & Adj, where Adj is a 13 month adjustment period, rarely used.
The problem is that I have FTE numbers for all 12 months populated, but not populated in "Adj", as there is no purpose in this case to do so. When I do a @IDESCENDANTS(Period), The #MISSING from the "Adj" period populates YearTotal time period. I actually need to populate the Jun FTE data into the Adj period in order for the aggregation to populate YearTotal.
Is this the design/functionality as it is supposed to work? What happens if I am budgeting only up to half way through the year and there is no data in the latter months? In this case an agreggation would not put anything in the YearTotal.
I would have thought that Time Balance Last would take the last "Populated" time period and put it in YearTotal, at least, thats what I would like it to do
Thoughts?
Regards
Mike

Hi Mike
Yes this is the functionality as it is designed, the TB Last option takes the last data value regardless of whether it is #Missing or Zero.
However, there is a SKIP field that allows you to tell Essbase to skip either or both of these values in order to find the last non-zero / non-missing value. So as you describe using TB Last with Skip Missing would mean that the value entered for June would show when YearTotal was retrieved.
Try it out and see if it does what you need but be aware that there are instances where TB Last accounts will genuinely go from a value to zero or missing.
Hope this helps
Stuart Game
www.analitica.co.uk

Time Balance is set to Last for EPMA Essbase application in Essbase Outline

Hello Gurus,
Following is my scenario -
I have an EPMA Essbase applications that I have deployed from Workspace.
I have observed that even though the Time Balance property for members for the accounts dimension are set to Balance (as seen in Dimension Library) in EPMA, after I deploy the application the dimensions are tagged as TB Last in Essbase outline (as seen in EAS).
I am not aware of the functional part much, would really appreciate someone's help on this issue.
Thanks.
hyperionEPM

Here is the doc that explains time balance settings in Essbase:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/dcatimse.html
Here is the doc that explains time balance settings in Planning:
http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch12s04s08s01.html
And here's a quick cross reference between Essbase and Planning:
ESSBASE / PLANNING
TB Last = Balance
TB None = Flow
TB First = First
TB Avg = Average
In general, Income Statement accounts are "Flow", and Balance Sheet accounts are "Balance" (unless you're storing activity, and not balances). Statistical accounts are a mixed bag.
Hope this helps,
- Jake

Time Balance Members in ASO

Hi-I have read in the documentation that ASO doesn't support TimeBalance members at all.Is there a work around involved where in wecan include TB members.Please let me know your ideas or a way to implement TimeBalance.Thanks in advance. Narain

Try this: Case WHEN IsUDA([Measures].CurrentMember, "Time Balance Last") AND (IsGeneration([Months] , 3)) THEN Tail ( Filter ( PeriodsToDate ( [Months].Levels(1) ), Not IsEmpty ([Month Of]) )).Item(0).Item(0) where Month Of is not in the time dimension, its part of a Time Views dimension. The key to this formula are the Tail and Filter functions. Tail says to get the last and filter is what is checking for missing. Put them together and you get skip missing with TB Last. Credit goes to George Spoffard for this solution.

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

... I didn't know that Time Machine was more a last resort back up instead of main back up.
Don't rely upon Time Machine to the exclusion of all else. I compliment Time Machine with a periodic "clone". TM is much better than nothing, but it's a safety net, not a hammock
Here is my understanding of Time Machine's file deletion algorithm, distilled from Pondini's FAQ, Apple's KB articles, and my own observations.
Time Machine deletes ("thins") files from the backup disk as follows:
Hourly backups over 24 hours old, except the first backup of the day
Daily backups over 30 days old, except the first backup of the week
Older backups get deleted when Time Machine requires space and you deleted them from the source disk.
Therefore, assuming TM has been performing at least one backup per day, backup files will remain available:
at least thirty days, if they existed on your Mac for at least a day
until you run out of space, if they existed on your Mac for at least a week
In addition to the above, Time Machine always keeps one complete copy of your source disk so that the entire volume could be restored if necessary. Any files that remain on your source volume will be present on the TM backup, no matter how old they are.
If you are using 250 GB of space on your source disk, its Time Machine backups are likely to require at least twice that much. A good estimate of the minimum required backup volume size would be about three times the size of your source disk - 1.5 TB in your case.
A more thorough explanation would require Pondini since he has plumbed Time Machine's mysteries far more than I have.
http://support.apple.com/kb/HT1427

I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd li

I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.

You can download Creative Suite 5 here:
Other downloads
To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
Adobe ID, sign in, and account help
See the bottom of the page for a link

The events of the last month have suddenly disappeared. I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Possible to retrieve ???v

The events of the last month, with the photographs have suddenly disappeared from the iPhoto Library. I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Is it possible to retrieve ???

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I recently uploaded a gift card with a balance of $25.00, I make a purchase in a game for $5.99 and my balance on my gift card is now $12.18. I did not receive an email confirming the purchase and do not see any activity on my account. Where is my money?

I recently uploaded a gift card with a balance of $25.00, I make a purchase in a game for $5.99 and my balance on my gift card is now $12.18. I did not receive an email confirming the purchase and do not see any activity on my account. Where did my money go? How can I get it returned??

The receipt usually takes more time to receive. I got my receipt from about 7:00pm yesterday at about 10:00pm today.

Time Balance Last

I'm starting to work on our balance sheet.I know I need to use "TB Last" for all the balance sheet accounts, but where do I need to load the beginning balances ??? Do they need to be inside the hierarchy for the total year (that might mess me up, as I'm using the BegBalance for some other stuff).Ack.

Hi
I have pretty much similar kind of design. Let me explain in using the Demo Basic Outline
We have Sales as a Measure in the Accounts Dimension. The aggregation of this Measure is SUM over time.
I create a new measure called Sales (Sum on Time). Here i set the node as Dynamic Calc, Formula is "Sales"; and Time Balance as TB Last.
This is not working. At higher levels of Time (Quarter) the Formula value overrides the Time Balance. Is the natural way of functioning.
Please help. This is quite important for our design.
Regards
bala

I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that the account is not authorised

I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that I am not authorised to do anything on the account in relation to the transaction. What should I do?

You can view and edit your orders without an Apple ID by logging in with your order number, along with the shipping zip code or email address.
I copied the text posted above from this website.
http://store.apple.com/us/help/viewing_changing_orders
Click or tap on the Order Status link here and you should be able to type in the order number and your zip code.
To view or edit your Apple Online Store order, visit online Order Status and log in with your Apple ID and password.

When I turn on my iPod Touch 5th generation, half of the screen has vertical white lines and it is irresponsive to the touch... is there anyway this can be fixed because this is my third time in the last 4 months I have had problems with Apple.

The screen looks completely normal besides the vertical white lines on the right hand side of the screen, as the "slide to unlock" is lighting up and the time and date are changing, but the screen is unresponsive. After several problems with Apple in the last few months (and two defective iPods including this one and one iPhone), I really don't want to go through the whole process of bringing it in or getting a new one entirely. It would greatly help if someone knows a solution, even if that would require completely resetting the iPod to factory settings, as I have had is synced to iTunes before. It would be greatly appreciated if someone could help. Thanks.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Seems like a bad digitizer or connection or logic board.
Apple Retail Store - Genius Bar

Retrieve account members with time balance of "last"

Similar Messages

Maybe you are looking for