Return Order incomplete because of missing address indicator (VBPA-ADRDA)

Hello,
Using the VA02 to create a subsequent retun order results in a complete return order created. However, when I use BAPI BAPI_CUSTOMERRETURN_CREATE to create the return order, the incompletion log identifies a missing address indicator   (VBPA-ADRDA) for the ship-to party. Both sold to and ship to party are defined as one time customers. Looking at the entries in table VBPA the problematic customer holds 'D' as the address indicator value while the other customer holds 'E' as the missing address value.
What could be the reason for the missing address indicator for that specific customer while creation works fine using the subsequent retun order creation?
Thanks in advance, Ziv.

1: You took care of the copy controls.
2: Whats the item category you are using in your return order. Please mark that item category as not relevant for pricing. Uncehck the pricing field in VOV7 for this item category. Also check the incompletion procedure to make sure "pricing" is not an entry.
3: Please check the pricing procedure you are using for the return order type, uncheck any "Mandatory " pricing conditions.
4: In the pricing procedure determination OVKK, please check you have the required entry for the return pricing procedure.
Please test with these changes and see the results,
Regards
Sai

Similar Messages

  • Downloading incomplete because of missing profile what is this?

    Tried to download Firefox when I tried to launch it came closed saying profile missing. I do not know what profile I need.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Problem wth incomplete returns orders -  Shipp pt and route are greyed out

    Hi
    This is the problem with the incomplete return orders (v.02). All the subsequent documents are in complete process, but the returns order status is showing  open status. This is because the user tried to remove the delivery block in returns order using a tcode (customized) and after that the shipping point and route in the returns order are removed and the fields are greyed out. So we need to complete all those returns order either through updating the database tables, please let me know how to achieve this?
    Thanks in advance
    Kishore

    Hi Kishore,
                    As you might have shipping point and the route in the incompletion procedure for this return delivery type and these shipping point and the route are automatically determined, these fileds are greyed out. You have to remove these fileds in incompletion procedure by going to "SPRO-IMG-SHIPPING-BASIC SHIPPING FUNCTIONS-INCOPMLTION FOR DELIVERIES"(VUA2--TRANSACTION).
    Or use seperate shipping conditions for the retunr process ,so that you can detemrine shipping point differently(You can assing some other shipping point as well in shipping point determination by entering Manual shipping point (OVL2).
    Regards
    Ram Pedarla

  • Amount on Goods receipt for return orders is wrong with movement type 653

    Hi All, I am sorry if it is a simple question because i am an abap'er.
    My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
    1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) -   PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
    So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
    The next scenario is if the material is returned? This is where we are having issues
    Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI  - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
    a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
    b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
    I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
    I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
    I even tried changing the schedule line category to DN but no help.
    I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
    Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
    My pricing settings are good.
    It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .

    Have a look at any of the following notes:-
    1)  Note 171989 - Sales-order-related productn: Custmr exit COPCP002
    2)  Note 520000 - FAQ: Valuated special stocks
    3)  Note 557582 - User exit and valuated sales order stock
    4)  Note 580228 - Incorrect prices for materials procured externally
    5)  Note 983193 - Docu:Externally procurd material in valtd sales order stock
    thanks
    G. Lakshmipathi

  • Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

    Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
    There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
    The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001  904  1110500002  does not exist (Check your entry)"
    This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
    I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
    Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
    Please advise on how this process should happen.
    Regards.

    Hi TQ,
    Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
    Can you elaborate more in detail how you solved your error few months ago?
    Thanks and regards

  • Transfer of Requirements for Return Orders

    Hi,
    Please I need  help on TOR management with Return Orders in SD.
    I've already red  all the threads realted to TOR and ATP but I couldn't find a solution. As we know TOR is dependent on the following data: reqts type, reqts class, checking group and schedule line category.
    The reqts type and class are determined in the strategy group (material master - MRP3).
    Now if I switch on Transfer of Requirements for Returns, at Schedule Line level and Reqts Class level, the result is that I can see requirements related to Returns in the availability check overview of Sales Orders (ATP count) but if I check in the requirements list (i.e. transaction MD04) these requirements related to Returns are not recorded. Why?
    And also another point please: requirements generated from Return Orders, into ATP count are considered as normal Sales Orders (negative sign, reducing ATP quantity, when it should be the contrary because a goods receipt is expected).
    Can you help me please on these 2 points (perhaps something related with Sales Document Category)?
    Thank you very much
    Kind Regards
    AP

    I practically did a sample order / returns order to see your requirements and these are my observations
    a)
    If you create a standard sales order, then the availability check registers a minus sign with stock required in Rec./reqd qty field.
    Once you save the sales order, this is not seen again as the total quantity is reduced by sales order quantity.
    It was indicating a minus sign when you created a returns order because you checked the Transfer of requirements and availability check indicators in schedule line category.
    It was simulating a requirement as you checked the indicators in schedule line category.
    If you create returns order with standard DN (i.e. Transfer of requirements and availability check indicators are not checked), then you would not see any requirement for stock i.e. you don't see any new entry in availability overview screen.
    b)
    You are not seeing returned quantities in MD04 because of Movement types. This has nothing to do with Transfer of requirements.
    Schedule line DN uses movement type 651.
    Using movement type 651, you post returns from a customer with returns delivery to blocked stock returns.
    The blocked stock returns are are neither valuated nor part of "unrestricted-use" stock.
    Hence you are not seeing the returned stock in your available stock.
    If you click the magnifying glass on total stock i.e. top line of your stock/requirements list (transaction MD04), you could see the returned quantity in 'Returns field'.
    If you want to post returns from a customer with returns delivery directly to the valuated stock, you could use the following movement types in schedule line category.
    653 Returns from customer to unrestricted-use stock
    655 Returns from customer to stock in quality inspection
    With these movement types, you could see returned quantities in stock/requirements list.

  • CO27 - Missing part indicator (Urgent)

    Hi All,
    In CO27, i find for a few materials, the missing part indicator has been ticked, while for a few materials it is not. I would like to know how is this indicator being set by the system. Because for the parts which i do not seen the indicator ticked, are not available at the moment in stock & hence i believe this indicator should be ticked. Kindly let me know where all i should check.
    Vivek

    Dear Vivek
    1st question
    If no ava check  is not ticked and status check is ticked.
    System will check availability of material when released and saved. Then after this if the MAT not available  status NMAT you can see in the header. Once it is register, system will check the availability every time you saved till you will get the status with out NMAT. In case NMAT is not there during release and after that there was some problem with the material stock and let us say stock is reduced, then actually material is not available, but in production order Since NAMT is not there system will not check the material availability.
    In your case since you are checking the ava in background , if you want the system to check all orders with or without NMAT then don’t tick-status check.
    In this case system load will increase as system has to check all the orders.
    2.Please do not mistake this tick. This is applicable for HALB material, and not for Raw material.
    If you have HALB material and it is having stock of 10, production orders for this halb material lets say 2 prod orders released (qty 10 each) and 3 are not released(qty 10 each).
    Then ava qty will be
    I leave Production orders field blank = 10
    (ii) when i consider only released production orders = 10+10*2=30
    (iii) when i consider all production orders = 1010*210*3 = 60
    If you are taking raw material, this tick has not relevant
    your 3rd question -
    Ava check if material consists of 2 things
    checking rule - defined for a transaction - PP for production order, A is for sales order, B is for delivery etc.
    Checking group - what you define in material master 01/02/CH.
    Combination of above checking rule and checking group will fix the scope of check.
    Hence in OPJJ, you need to give checking rule and checking group both.
    as per understanding 01 will not change to 02 as in that plant 01 is fixed if it is in material master.
    Please come back if required
    If you want I will send you the preliminary document to understand what is AVA check if required.

  • Can't create DN for sales return order

    hi,all
      when i create a return order,i can't create a delivery note for it, the error message is: Copying is not poss.because an entry is missing in Table TVCPL: ZLR ZRE RE. can everybody tell me how to solve this issue?

    Hi,
    Please maintaine copy control for sales document to delivery document.
    As you are using your own document types, there are no copy controles maintaine for your sales document type to your delivery document type.
    Go to T. Code VTLA
    This the t. code used to maintaine copy controls for sales document to delivery document.
    Give Target Document as your delivery document type and source document type as your sales document type.
    Otherwise you can copy standard copy control,  RE -> LR
    and put your document types i.e., ZRE and ZLR.
    Now you can create return delivery.
    Hope this is clear.
    Reward if helpful.
    Thanks,
    Praveen

  • Free goods issue in return order

    Dear Guru's
    Please help to resolve the below issue
    We have Free goods process, If customer is ordered 10 goods will give 1 as free good total quantity 11 for this I have maintained the condition record, I have created a sales order for total quantity u2013 100 + 10 free goods = 110 when ever I have entered the main item (line item #10) system automatically proposes the free goods quantity in line item # 20, Out this hundred quantity customer has returned 50 quantity so I have created return order with reference to invoice so in return order  both line items have been copied with actual quantity (100 + 10 Free goods). So I changed the main item quantity as 50 (because customer has returned only 50 quantities + free good (for 50 items) 5 = 55)
    Here my requirement is when ever I have changed the main item quantity in return order system is not calculating the free good proportionately as per the free goods condition record.(for 10 item 1 item is free)
    Ex:- when I have changed the return order main item quantity as 50 still free goods showing as 10 only(in line item #20) (which is for 100 quantity)
    What customization is required system should update free goods proportionately as per the free goods condition record in Return order.
    Regards,
    Hari Krishan

    Please post it in SD/MM forum.

  • A problem with return order with free goods

    Hello
    I am working on ECC 6.0
    I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take  1 free pc
    1 pc = 10 $
    100 pcs = 900 $
    120 = 1080 $
    the problem when I am creating a return order with 30 pcs the system  calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
    Regards
    Jacopo Francios

    hi ,
    Such scenerios can be tackled by different pricing procedure in return scenerio.
    See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
    So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
    This is generally done also for tackling such scenerios.
    Thanks & Regards

  • Error while creating Return order with reference to Complaint

    Hi,
         We are using Complaint Management in CRM Service. After creation of Complaint, we want to create Return Order that is going to replicate in R/3 .
    We are able to create Return request in CRM as a follow up document. However we are not able to replicate the return order in R/3.
          We have created Return Document type CRMR in R/3  with related Item Category REN assignment & corresponding number ranges assignment.
    We facing problem, as this document is not getting replicated in R/3 & in Complaint, it shows message as "The document is being distributed at the moment, and therefore cannot be changed. The document will be ready for input once it has been distributed successfully.”
    In SMW01, it is showing as fully processed document. However in error segment it shows as error” No upload into R/3" &"R/3 Adapter is called".
    Could please suggest any configuration we have missed or additional configuration to be done?
    Regards,
    Arun

    Hi Arun,
    Have you check & maintained middleware setting for  document transfer
    (tcode R3AC1). Check object SALESDOCUMENT and try maintain transaction
    type there. Don't forget to activate use tcode R3AS.
    hope this helps.
    Gun

  • Free goods in return order

    Dear All,
    We are creating return order with reference to billing document.Billing document has free goods as second line item .When I create return order only main item is getting referenced not the free goods .
    Is it a standard behavior ? can we achieve to copy free goods in return order also??  
    Needed quick reply please... gone thru few sdn links .but all with confusing  solution .....with all setting suggested I could not achieve 
    Kindly guide.........
    Umesh Karanth

    Dear Sir,
    I have maintained  for the combination of TANN TO REN    as follows:
    copying requirement for VBAP --153
    copying requirement for business data--104
    copying requirement for VBPA---004
    copying requirement  --303
    Pricing type --D
    But with this free goods are not getting referenced to return order. Is there anything I missed ?? pls guide
    Thanks,
    Umesh Karanth

  • Free Goods are not getting exploded in to Sales Return Order

    Dear All
    I have created one order in which I am giving 13:1 (inclusive) free goods using VBN1.
    Order Qty               Converted to             Item Category 
    288  (13:1)              266  (With Price)      ZTAN
                                   22  (Free)               ZTNN
    I am having no problem upto Invoice. But while making return sales order with ref. to the invoice, it's throwing a message 'The system didn't find a valid bill of material' and free qty of 22 pcs are not getting imported into the return order.
    Please help

    Hi
    Returns Orders has document category H where the free goods are not supported may be because of this it is not get imported.See details below.
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm
    Regards
    Ramesh

  • Return Order

    Hi guru's
    In my case-->Return orders"X"and "Y" both generated credit memos based on the quantity of the return order, even though the post goods issue quantity was less.  The credit memos had to be cancelled and the quantities in the return orders changed to reflect the post goods issue quantities.  So that the credit memos could be re-created for the correct amount. 
    Shouldn't the post goods issue quantity drive the credit memo, in the same way that the goods issue quantity drives the invoice in a sales order? Is it right?
    Please reply
    thanks

    post goods issue quantity drive the credit memo NO
    A return is a sales document used in complaints processing for when a customer sends goods back.
    Use
    You enter a return in the system if the customer returns damaged goods, or goods that had been delivered for sale on approval.
    The return causes the system to:
    Register the receipt of goods using a returns delivery, and post the goods to stock (for example, blocked stock).
    Create a credit memo, once you have checked the goods and approved the complaint.
    Structure
    A return is another type of sales document like a standard order. For more information on sales documents, see Working With Sales Documents
    Integration
    The return triggers the following functions:
    Delivery (returns delivery)
    Billing (for creating a credit memo)
    e quantity drive the credA credit memo request is a sales document used in complaints processing to request credit for a customer.
    Use
    If the price calculated for the customer was too high (for example, with the wrong scaled prices or because a discount was forgotten), you can create a credit memo request. The credit memo request can be automatically blocked for checking. Once it has been approved, you can remove the block.
    The system uses the credit memo request to create a credit memo.
    Structure
    A credit memo request is another type of sales document like a standard order. For more information on sales documents, see Working with Sales Documents.
    A credit memo request starts the billing process.

  • Return order BUS2102 Workflow container data not populated

    Hi All,
    Please requesting you to provide your advise on the below issue.
    I have created a custom workflow with business object BUS2102
    In the Workflowtemplate (E.g. WS90000XXX)
    i have included the triggering event for BUS2102 with EVENT "CREATED" and
    added a container element SDReturnCN of type BUS2102
    Once the Return Order is created the Workflow is getting triggered successfully
    but data is not populated into the container SDReturnCN.
    Do i need to write and EXIT to populate container UNLIKE as in Credit memo bussiness object :BUS2094
    if yes please let me know which part i am missing.
    Thanks & Regards,
    Veeru.

    Hello,
    "but data is not populated into the container SDReturnCN."
    Check the bindings. Where is the value coming from?
    regards
    Rick Bakker
    hanabi technology

Maybe you are looking for