Returns delivery deleted

Experts,
I have deleted return delivery .
After deleting it will,the return order is still show in document flow.
After deleting it  why is it still showing in the document flow?
Thanks

I went to VA02 and tried to delete RE order .
error msg
This document cannot be deleted
Message no. V1006
Diagnosis
The document cannot be completely deleted because further processing has already taken place or the document item does not permit deletion of the document.
Procedure
Display the document flow to see which subsequent documents have already been created.
You can attempt first of all to delete all the subsequent documents and then delete the current document.
If it is not possible to delete all subsequent documents, you can still enter a reason for rejection for all items to prevent any further references or deliveries being made.
I went to VLO2N and tried to delete the returns delivery and the error
Item 10 cannot be deleted (GM status)
Message no. VL111
Diagnosis
The goods movement status (partially or completely processed) does not allow the item to be deleted

Similar Messages

  • Delete and Return delivery button in confirmation

    Hi All,
    We are in SRM 4.0 and using extended classic scenario.
    Recently we had an issue with the batch job CLEAN_REQREQ_UP. It has been scheduled for every 2 mts and it used to complete within 5 seconds. But one schedule of the job was running for a long time (3 days) and we didn't notice that. Parallaly the other schedules of the jobs are running fine.
    I checked the shopping carts, Po and GR created on those 3 days and they got udpated in back end system and also in SRM withtout any issues.
    But the "Delete and Return Delivery" button is not active in the confirmation documents posted on those three days. We need to activate those buttons in the confirmation documents.
    Note: Problem is NOT with the confirm Goods / service transaction. It is only with the confirmation documents posted on those 3 days.
    Is there a way to activate those two buttons in the confirmations document?
    Please help me.
    Thanks.

    Hi Arun,
    Run the Report BBP_GET_STATUS_2 for those three days only.
    and then check.
    Regards,
    Sachin

  • RE: Delete return delivery.

    Hi Experts,
    Pls suggest me the bapi or function module to delete return delivery(VL02n) .
    Regards,
    sai.

    Try this
    http://abap.wikiprog.com/wiki/BAPI_INB_DELIVERY_CHANGE

  • Return Delivery with a Credit  Memo Request.

    Hello Gurus. I have been working on this issue for quite some time. I will explain the process that was provided by our installers. It doesn't seem to be adding up. Here is the situation, Product that was sent incorrectly was returned. According to our procedures, we create a returns delivery thru VA01, with RE (returns) as the Order Type. We then create it with REFERENCE to the Invoice Number. We remove the items not being returned, enter the Billing Block and Order Reason. Then Save. It gives us a returns delivery number of 6000000, We then return the product back to our stock through MB1B. We clear it and put it back as normal. We then Create a Credit Memo Request through VA01, order type is CR (Credit Memo Request) Create with Reference, we again select the invoice number, delete the items not being returned, enter billing reason, then save. It gives us a number of 60000001. At this point, we enter VF01 and create a billing document. It says the order has billing blocks. We go back in and remove the blocks. We hit save. It now seems to ok, except that, under document flow, under the first delivery 6000000, it shows still being processed (the goods returns shows complete, but the line above shows being processed), and the document flow for 60000001 shows the invoice and the Accounting document as Not Cleared. My question is, should there be 2 seperate orders? A returns delivery and credit memo Request should be under the one delivery number 6000000 according to our procedures? Those were the steps given. Something seems out of place. Are my steps out of order?  Are the procedures wrong?  If anybody has any insight, I would much appreciate it.

    I would start fresh with a new sales order.  When you create with reference both the return delivery and credit memo are created with reference to the return sales order.  Here is an example document flow to clarify:
    Document                                      Date               Qty/value   UoM/Cur   Overall proc. status
                                                                                    Return 60000077 / 10                          08/25/05               10.000  EA      Completed                                 
    . Returns Delivery 500000016 / 10             08/25/05               10.000  EA      Completed                                 
    .. GD returns QI 4900030060 / 1               08/25/05               10.000  EA      complete                                  
    .. Credit for Returns1 10000017 / 10          08/25/05               10.000  EA      Completed                                 
    ... Accounting document 10000017              08/25/05               10.000  EA      Cleared

  • After Return Delivery to Vendor cannot remove shipping notification in MD04

    Hi.
    Good Day.
    I would like to ask help regarding to my issue.
    We had to create a return delivery to send the goods back to the vendor A. The packaging item was blocked and we created the outbound delivery via transaction MBRL with reference to material document when we do GR with the inbound Delivery A. After having processed all necessary steps including the posting of the goods issue of outbound delivery, the inbound delivery A is again open and expects a goods receipt of the returned units. This can also be seen in MD04. Meanwhile the supplier has sent a new "compensation" delivery, with a different inbound delivery B. This was goods receipted and with this delivery the complaint/return process is finished from the supplier's and our point of view.
    Problem: What remains is the original open inbound delivery A. Currently we have no idea how to get this one deleted, but we need to cancel it, because there won't be a credit note and there won't be another physical delivery for this inbound delivery A.
    What I have done so far:
    1) Tried using VL09 to inbound delivery A but there was no effects. probably because the inbound delivery A is already closed.
    2) It is not possible to set the item of SA to finished because we my use that item again.
    Thanks for your help.
    Med'z

    Hi Madhu.
    Good Day.
    First of all I really appreciate your response.
    I tried to change the first inbound delivery but canu2019t do much. Because all fields were block since it is already completed.
    The system shows the error "The goods movement status (partially or completely processed) does not allow the item to be deleted."
    I also tried to change the schedule line but it didnu2019t do any effect with the issue.
    Thank you,
    Best regards.
    Medel.

  • Return Delivery button is Disabled for Goods confirmation

    Hi,
    We are on SRM_SERVER 550, SP11, SAP 4.7 backend and have configured Extended Classic Scenario.
    I am unable to do Goods Return delivery for Confirmations which have status u201CPosted in the Backendu201D.
    The Return delivery button is Disabled, while the Delete button is Enabled, when I access confirmations through u2018Display and Process Confirmationsu2019 screen.
    We have also run the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2.
    Kindly let me know if any additional job needs to be executed or any specific note that needs to be implemented.
    Thanks,
    Kiran

    plz wait for some time . I am pretty sure STATUS JOB do this job . what variant you used for status_2 job?
    if you could do it backend , but if you could not in srm means, that PO status was not updated.
    even i had experience this in classic, i evening did GR inSRM and immediately wanted to do return delivery but that button was disabled for me. morning i saw it was ok . i saw RETURN was active.
    muthu

  • Error when entering a return delivery

    We are using SRM version 5 extended clasic scenario
    When trying to enter a return delivery against an order the user get the following error
    "return delivery quantity for order item exceeds delivered quantity"
    The user gets this error as soon as they select the "return delivery" option and are not permitted to change the quantity returned.
    Any suggestions on how to proceed welcomed!
    Cath

    Hi
    when you do a return delivery, system seems to be proposing the whole quantity in return delivery and your GR seems to be with a lower quantity.
    Return delivery should be proposing the quantity in GR ...Is this an SRM PO or a backend PO
    Refer to the oSS Note - 1411808 which will apply a correction in FM BBP_BE_PO_GETHISTORY. Remember this note is applicable only if you have applied OSS Note 1381757 or you are on Support pack SAPKIBKT16
    lt_be_poacc[]    = st_be_poacc[].
            lt_be_posched[]  = st_be_posched[].
            lt_be_pohist[]   = st_be_pohist[].
      *>>>> START OF DELETION <<<<<
            lt_be_pohist[]   = st_be_pohist[].
      *>>>> END OF DELETION <<<<<<<
      *>>>> START OF INSERTION <<<<
            lt_be_pohistt[]  = st_be_pohistt[].
      *>>>> END OF INSERTION <<<<<<
    Regards,
    Virender Singh

  • Return Delivery via BAPI_GOODSMVT_CREATE

    Hi,
    I'm trying to post a return delivery movement type 222 using BAPI_GOODSMVT_CREATE but getting error For reservation 0002207600 0001, no movements can be posted  . I notice that this bapi was using MB11 for the posting and tested also getting same error. But the return delivery was able to be post using MIGO.

    Not able to post via BAPI causes by the item in the reservation was mark for deletion.

  • Unable to reverse PGR for return delivery (RL).

    Prerequisites:
    WM managed storage location w/o HU and SU
    Document flow
    1.  Sales order
    2.  ODB
    3. TO
    4. PGI
    5.  Invoice
    6. Return sales order in reference to invoice from step 5
    7. Return delivery RL
    8. TO: Materials put away  from interim 904 storage type to warehouse storage type
    9. PGR
    10. VL09: Reversing goods movement (step 9) for RL delivery (step 7)
    In step 10 I am getting error:
    Message no. L9009: Storage bin PL1 904 8200000192 does not exist (check your entry).
    I have made work around:
    1. LS01N: Creation storage bin (904/8200000192)
    2. VL09: now it is OK
    3. LT10: from WH storage type to 904/8200000192
    4. Delivery status (Picking) is not refreshed (like in LT0G)
    It works but in my opinion it is another scenario for this. 
    My question is how to reverse PGR for RL return delivery (without work around I described)?
    Andrzej

    Hi Csaba,
    1. L9005 message
    thank you very much for you response. As I wrote, now I have no problems with L9009 message (I was blind not to notice such obvious settings in V_T321 and V_T333)
    Before i wrote this message I have double checked this configuration. But I have did not notice bad setting. Now VL09 works OK.
    The open problem is that delivery still has picking/WM status not refreshed.
    I've made nearly the same settings that you proposed. I am a little bit confused that you wrote:
    if I do not enter '1' in RBLVS I get error message L9005
    RBLVS is a "RefMvtType WM" and you set it to 656. You probably mean BSLVS - Special stock indic.
    I have following settings:
    LGNUM;RBLVS;BSLVS;KZBEW;SOBKZ;BSSKZ;LGREF;BWLVS
    PL1;658;;L;;;;652
    In my case BSLVS='' (but our cases are little bit different)
    2. picking/WM status not refreshed
    I have made work around with deleting delivery/delivery items.
    As we noticed standard SAP  system is not set to manage the reversal of return delivery with WM
    Thank you for confirming my doubts.
    Andrzej

  • Can we create cancellation/return delivery with BAPI_CONFEC_CREATE

    hi experts,
    i want to use the above BAPI to create cancellations and return deliveries in SRM 7. i am not able to figure out the exact data that needs to be passed to the BAPI to create cancellation/return delivery. i have used class approach to do the same and able to create them, but i am specifically interested in FM/BAPI
    does anybody used this BAPI to create cancellations?
    thanks

    hi,
    i could not make this BAPI work for cancellations but found another way of doing confirmations and cancellations using std FMs
    here is the code for confirmation
    CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
       EXPORTING
         I_OBJECT_ID                      = is_conf_header-po_number
         I_WITH_ITEMDATA                  = 'X'
       IMPORTING
         E_HEADER                         = ls_header
         ET_ATTACH                        = lt_attach
       TABLES
         E_ITEM                           = lt_item
         E_ACCOUNT                        = lt_account
         E_PARTNER                        = lt_partner
         E_LONGTEXT                       = lt_longtext
         E_ORGDATA                        = lt_orgdata
         E_TAX                            = lt_tax
         move-corresponding ls_header to ls_new_header.
    ls_new_header-process_type = 'CONF'.
    ls_new_header-subtype = 'CF'.
    ls_new_header-src_object_type = 'BUS2201'.
    ls_new_header-src_guid = ls_header-guid.
    clear ls_new_header-object_id.
    loop at lt_item into ls_item.
      read table it_conf_items into ls_conf_items with key po_item_number = ls_item-number_int.
    if sy-subrc ne 0.
      continue.
      endif.
      move-corresponding ls_item to ls_new_item.
      ls_new_item-src_object_type = 'BUS2201001'.
      ls_new_item-src_guid = ls_item-guid.
      ls_new_item-final_entry = ls_conf_items-final_entry.
      ls_new_item-quantity = ls_conf_items-quantity.
      append ls_new_item to lt_new_item.
      endloop.
    loop at lt_partner into ls_partner.
       move-corresponding ls_partner to ls_new_partner.
       append ls_new_partner to lt_new_partner.
       endloop.
       loop at lt_orgdata into ls_orgdata.
         move-corresponding ls_orgdata to ls_new_orgdata.
         append ls_new_orgdata to lt_new_orgdata.
         endloop.
    loop at lt_account into ls_account.
       move-corresponding ls_account to ls_new_account.
       append ls_new_account to lt_new_account.
       endloop.
    lv_src_guid = ls_header-guid.       .
    CALL FUNCTION 'BBP_PD_CONF_CREATE'
    EXPORTING
      I_SAVE                           =  'X'
       I_HEADER                         = ls_new_header
       I_SRC_GUID                       = lv_src_guid
       IT_ATTACH                        = lt_new_attach
    IMPORTING
       E_HEADER                         = ls_e_header
       ET_ATTACH                        = lt_e_attach
      TABLES
      I_ITEM                           = lt_new_item
       I_PARTNER                        = lt_new_partner
       I_ORGDATA                        = lt_new_orgdata
       E_ITEM                           = lt_e_item
       E_ACCOUNT                        = lt_e_account
       E_PARTNER                        = lt_e_partner
       E_ORGDATA                        =  lt_e_orgdata
        e_messages                       = lt_new_message
    et_msg[] = lt_new_message[].
    ls_conf_documents-doc_number = ls_e_header-object_id.
    append ls_conf_documents to et_conf_documents.
    CALL FUNCTION 'BBP_PD_CONF_SAVE'
    EXPORTING
        IV_USERTYPE               = 'X'
       IV_HEADER_GUID            = ls_e_header-guid
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT
    code for cancellation
    get all the confirmations created for the PO
        CALL FUNCTION 'BBP_PD_CONF_GETLIST'
          EXPORTING
            i_for_po_id = is_conf_header-po_number
          TABLES
            e_pdlist    = lt_pdlist
            e_messages  = lt_msgs.
    delete GRS which are cancelled
        LOOP AT lt_pdlist INTO ls_pdlist WHERE subtype EQ 'CA'.
          DELETE lt_pdlist WHERE guid = ls_pdlist-src_guid.
        ENDLOOP.
    delete the cancelllation documents. we don't need them anymore
        DELETE lt_pdlist WHERE subtype EQ 'CA'.
        loop at lt_pdlist into ls_pdlist.
          CALL FUNCTION 'BBP_PD_CONF_GETDETAIL'
           EXPORTING
              I_GUID                           =  ls_pdlist-guid
              I_WITH_ITEMDATA                  = 'X'
          IMPORTING
             E_HEADER                         =  ls_conf_hdr
           TABLES
             E_ITEM                           =  lt_con_items
             E_PARTNER                        =  lt_con_partner
    move-corresponding ls_conf_hdr to ls_new_header.
    ls_new_header-process_type = 'CONF'.
    ls_new_header-subtype = 'CA'.
    ls_new_header-src_object_type = 'BUS2203'.
    ls_new_header-src_guid = ls_conf_hdr-guid.
    clear ls_new_header-object_id.
    loop at lt_con_items into ls_con_items.
      move-corresponding ls_con_items to ls_new_item.
      ls_new_item-src_object_type = 'BUS2203001'.
      ls_new_item-src_guid = ls_con_items-guid.
      append ls_new_item to lt_new_item.
      endloop.
    loop at lt_con_partner into ls_con_partner.
       move-corresponding ls_con_partner to ls_new_partner.
       append ls_new_partner to lt_new_partner.
       endloop.
          lv_src_guid = ls_conf_hdr-guid.
    after that call BBP_PD_CONF_CREATE as we did for the confirmation followed by BBP_PD_CONF_SAVE and commit work.
    Edited by: SRM7CON on Mar 7, 2012 12:04 PM
    Edited by: SRM7CON on Mar 7, 2012 12:25 PM

  • Single Excise Invoice for Multiple Return Delivery

    Suppose we have multiple number of material documents against a single PO and the excise invoice posting has been done. After quality inspection the material gets rejected and we create a return delivery using 122 movement type. In this situation, is it possible to create a single excise document for all the return delivery documents  ?

    Can you spell out clearly whether you are talking about sales return or vendor return ?  If it is for sales, please let me know whether the materials were left out or not.
    G. Lakshmipathi

  • Return delivery process with excise in MM module

    Dear Friends,
                        this is chandu working as a consultant-mm , please any one can give the clear information regarding return delivery process for excise material , i'm following one process that is after invoice verification
    1) reverse excise invoice with MR8M
    2) return delivery with MIGO
    3) prepare outgoing excise invoice with J1IS  for print out J1IV
    4) preparing credit memo in MIRO with reference to original po
    the second process
    1) create return po with selecting return po check box in po
    2) GR with reference to the return po
    3)then J1IS  and J1IV  same process
    4) credit memo for return po in MIRO
    this 2 ways i'm doing the process  in the registers part1 that is qty updating (i.e qty is reducing)  but in the case of part2 that is the value it is not updating (i.e value has to reduce in the register right i'm working first time on CIN plz guide me the correct procedure if i'm doing wrong , in this my problem is only value not updating part2 register plz give me solution with clear explanation .
    regards
    chandu

    Hi,
    Follow the below mentioned procedure;
    1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
    2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
    3. J1IS u2013 Excise Invoice Other Movements
    Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
    Here put all details as below and Press u201CEnteru201D.
    Ref.doc.type - MATD, Doc Number - Material document No of 161 mvmt, Doc Year, Series Group, Excise Group and Vendor
    Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
    4. J1IV - Post and Print Outgoing Excise Invoice.
    5. MIRO - Credit memo w.r.t. Returns PO.
    Regards,
    Mahesh Wagh

  • Return Delivery to vendor

    If the purchase  is for 100 qty and having  4% VAT
    But in case if partially delivered (50 qty)how the system will calculate tax.. and in the same case if i return 25 qty frm it..
    how the system calculates the VAT.....

    Hi,
    If the purchase is for 100 qty and having 4% VAT
    But in case if partially delivered (50 qty)how the system will calculate tax.. and in the same case if i return 25 qty from it..
    how the system calculates the VAT.....
    It is very simple it will calculate based on GR Qty
    Assume iy order 100 Qty
    100* 10= 1000
    4% * 1000=40
    It w ill shows in PO but if done GR for 50 Qty system will take in to account for 50 Qty only.
    And same will appear in MIRO.
    If you perform 122 return delivery and then post the vendor invoice MIRO. System automatically consider for 25 Qty and subsequently 4% VAT on that portion.
    Regards

  • Capture Excise Invoice for Returns delivery

    Dear friends,
    Once the returns sales order is created and followed by returns delivery, we need to capture the excise invoice for it. Can anyone kindly guide this process. What will be the T.code for capturing excise invoice in this scenario and pls explain the process.
    Points assured
    regards
    Krishna.C

    Hi,
    We have had the same problem way back in 2003. But SAP has suggested to post a manual JV entry through J1IH or through J1IS. I dont remember which one of the above 2 transactions we have used.
    Also have a look at the SAP notes.
    Kind Regards
    Chakradhar

  • CIN process to enter Excise Invoice for Return Delivery

    Folks
    I would like to know How to process excise invoice for return delivery. We have return sales order, return delivery created and product is received into inventory Customer return Blocked stock (movement 657).
    Where and How can i enter Excise invoice for this return (Credit Memo)?
    I tried J1IH transaction--> Other Adjustments
    I am getting following error.
    GL account has not been assigned for RG23ASED in customization
    Message no. 8I447
    Diagnosis
    GL account has not been assigned for the excise a/c in customization
    Procedure
    Assign GL a/c for the excise a/c in CIN customization under :    Accounting ->  Assign GL accounts to excise groups and                   transaction types"
    Please help

    J1IIN is intended only for outgoing sales and not for returns.
    For updation of excise related sales returns, run J1IH and do the following:-
    Customer Credit
    Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
    Cenvat Debit
    Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
    G. Lakshmipathi

Maybe you are looking for