RF Device Functionalities?

Dear MM Gurus,
I would like to use RF Device functionalities within Lean WM? Are there any limitations?
Is it possible to use Standard Mobile Data Entry functionalities without Lean WM i.e only with IM?
Thanks & Regards,
Ramkumar

Hello Ramkumar,
SAP is fully supported with RF functionality, the main area for RF support in SAP is WM. There are preeti standard RF transactions for WM are available, but if you want to use for IM transactions then you need to develop the program as SAP does not provide the RF transaction for IM.
Currently, I am working on the same project in which our client wants RF support for IM transactions.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

RF Device Functionalities with Lean WM?

Hi MM Gurus,
I am having a doubt. Is it possible to have some of the RF Functionalities using Lean WM? In other words, to utilize the SAP Standard functionalities for Mobile Data Entry, whether Warehouse No be it in the form of Full WM or Lean WM is it necessary?
Our Warehouse structure is not structured enough to go for WM. Hence, we are planning to suggest Lean WM, only for the purpose of utilizing RF functionalities. Is it really advisable?
Thanks & Regards,
Ramkumar

Hello Ramkumar,
RF functionality is mainly designed for WM transactions however some transactions are available for IM level as well. so to utilize these transactions you need to create just warehouse number and design RF menu accordingly.
For non-std functionality you need to develop the program and assign that program in RF menu.
You need not to use full WM for this RF functionality.
Regards
Arif Mansuri

Nokia 5800 - No Support for TV out-mode?

I just recently realised that that is true for my set... That there is no support for TV out-mode... I've tried, audio comes out from my TV speakers but there is no visual. Is there anything at all that I can do to utilise this feature? I have after all been supplied with the wires and all...

The Whole Story As Below, Anyone Can Help?
[THREAD ID:1-3T7CFIN]
SR 1-8296203408
Dear Mr. Xh,
Thank you for emailing Nokia Careline.
In response to your email, your concern has been noted. We know that our supplier is doing everything in their power to remedy the situation. We suggest to check with your dealer if they have a policy regarding exchanges. We do apologize for the inconvenience caused.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Ana V.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
-----Original Message-----
From:
Sent: 03/10/2009 11:02:40 PM
To: [email protected]
Subject: Re: Nokia -Nokia 5800 Xpress Music - Tv- Out Inquiry
Dear Nokia Careline,
The "No Return Policy" already be used here. Seem that I have no choice to go for other alternatives. Maybe I have to file the case to our local authority i.e. Tribunal Court Claim to exercise my consumer right here.
Perhaps, further blogs at Nokia discussion column, facebook, twitter might help to let others understand more about so-called Nokia Careline entertain their loyal customer.
If you insist your stand there, then I am always ready to go for my alternatives.
I won't let go unless you could satisfy me.
--- On Thu, 10/1/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
To:
Date: Thursday, October 1, 2009, 3:39 AM
Reference No.: SR# 1-8296203408
Dear Mr. X,
We appreciate your prompt reply.
We will be noting for concern as a feedback. However, please be informed Mr. Tan that Nokia has noted in the box regarding the said case.
The outage experienced by our sub-supplier was quite unexpected. Typically, the lead time for components such as this one is fairly long, and one cannot react to sudden changes at short notice. We value our relationship with our suppliers and sub-suppliers, and know that our sub-supplier is doing everything in their power to remedy the situation and return to regular supply.
The lack of TV out should not affect any other device functionalities besides that you will not be able to show/transmit pictures or video to external monitor/screen.
As Nokia does not have a replacement policy, we suggest to check with your dealer if they have a policy regarding exchanges.
Apologies for any inconvenience.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Nicky E.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
[THREAD ID:1-3T7CFIN]
-----Original Message-----
From:
Sent: 30/09/2009 10:32:05 PM
To: [email protected]
Subject: Re: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
Dear NOKIA CARELINE,
Yap, you can tell me leaflet included & a tiny label on the pack box. But who will really check every single area of the pack box & read the whole manual or leaflet when they decided to buy the phone. What normally customer will check is the handphone and the accessories. Now you are telling me that customer have to check everything even they buy something from a reputable company like Nokia. If I going in a shop that sell a China like Nokia 5800 handphone and I bought it then I won't have a say here at all.
I have checked with my retailer they allow me to return the unit but I can't get full refund from them. They are going deduct a couple of hundred cause they said the unit is considered used unit now. According to them instead of asking customer to wait they prefer to refund the customer. So who is going to bear for the cost now.
I certainly frustrated by getting a unit that without TV out function. If you are telling me that once manufactured the feature could not be added in, then I would say if you do have a unit with TV-out feature now you could exchange directly to your customer. Why still ask your loyal customer like me to refer to dealer or retailer. Is that what you mean after sales service or NOKIA CARELINE. You don't even care in the first place.
Your apologies certainly couldn't be accepted with reason of Nokia did include leaflet to inform and tiny sticker at the bottom of the pack box. Sound irresponsible to me at all.
What I wanna your care now, that is pls exchange a unit with TV-out feature with mine in which without such feature. Do I really put the CARELINE into difficulty position. Your reply to me is highly appreciated and also to show that you care or don't care.
Regards,
XX
--- On Wed, 9/30/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
To:
Date: Wednesday, September 30, 2009, 5:14 AM
Reference No.: SR# 1-8296203408
Dear Mr. X,
Thank you for emailing Nokia Careline.
Greetings!
In response to your inquiry, please be informed Mr. Tan that due to a component shortage, a limited number of Nokia 5800 Xpress Music has been manufactured without the TV-out functionality. It is possible that you have one of these devices. In that case, the sales package should have a sticker on the package and a leaflet inside the package that inform about the lack of TV-out functionality. Also, the TV-out cable has been removed from the affected sales packages.
Kindly take note Mr. Tan that it is not possible to add the feature after the device has been manufactured. Therefore we have labeled the affected sales packages with a sticker and included a leflet that inform about the lack of TV-out functionality. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
The new batch of phones should have the feature back. As this matter is clearly stated in the sales package, it is not possible to return to Nokia. However, you may check with your dealer if they have a policy regarding the return of the unit in exchange for a version that has the TV-out feature. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
Apologies for any inconvenience.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Nicky E.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
[THREAD ID:1-3T7CFIN]
-----Original Message-----
From:
Sent: 30/09/2009 09:04:38 AM
To: [email protected]
Subject: WebForm Automated Email
[Message:I bought a unit of Nokia 5800 last week for my wife. I discovered that the unit I bought is without TV support because when I tried to connect the TV cable that I bought. I tried to check the manual & pack box then only noticed a small label on the pack box stated no TV out supported. The retailer informed me that they only aware about this when I complained to them. I checked the discussion blogs, some stated because of worldwide component shortage so such function being omitted. I can't accept such explanation because I feel like I was being cheated by Nokia. Am I buying a pirated product now. Oh come on, how could Nokia so irresponsible to deliver the product with imcomplete function since TV out in general or ealier batch was included. Could you imagine if next time the product is delivered without GPS function, camera support, wifi & etc. by giving excuses of worldwide component shortage. What's the different buying a China Imitaion Product
now. I certainly wanna to return my unit if such function was omitted. Please reply your loyal customer ASAP.]

LG Enlighten - Yahoo doesn't work

Good Morning All; This is the first phone I have ever had with Web Browsing.....My question is how do I clear the history? Right now, when I try to go to Yahoo I get a Message "Data Connectivity Problem; This page contains too many server redirects" I am unsure what to do here? I figure if I clear out the history and start over again, the problem will fix itself? Has anyone else seen this kind of thing before? I know Yahoo is working on my home laptop. Thank you, Cheryl

Cher42164, clearing the cache and browser history can provide your phone with memory and help improve some of your device functionalities. I haven't seen this error message before but know that customers should clear their cache and history periodically so that your phone wont start to slow down. I have listed steps below.
Launch the Web Browser.
Press the Menu button.
Select Settings.
Steps to Clear Cache
From the Privacy settings section, select Clear cache.
Visited website content stored on the device. The cache enables the browser to download only the content that has changed since the last time a website was visited. Since the browser only downloads changed content, pages are loaded faster.
Select OK.
Steps to clear history
From the Privacy settings section, select Clear history.
A listing of URLs (website addresses) that have been recently visited.
Select OK.
Steps to Clear Cookie Data
Some cookies contain customized preference and logon information for previously visited websites. Once deleted, the website may prompt for this information again.
From the Privacy settings section, select Clear all cookie data
Select OK.
Top

Never had a problem...until now.

I never had a problem with this phone until the update. Sometimes when I take a picture the phone freezes and restarts itself. It has ruined a few of my pictures. It's hard to describe but it like put the picture on the side of the picture in black and white all distorted. All of my pictures don't show up in my gallery. Is I turn my phone off n back on they show up. My phone is constantly loosing 3G and makes the internet super slow. I have to turn the phone off and back on. Anyone else having these problems with the update or does it just sound like my phone needs to be replaced?

Thanks to the community members for all your input regarding RacerGurl11's issue. I see from your post that many of the beginning trouble shooting steps have been performed, including a factory reset and your continuing to have issues. I'm sorry this is occurring because the camera on your phone is one of the most important features to use. I use mine every day because its convenient to save, and share with others, so I truly understand how you feel. I was unable to locate any known or reported issues with the camera on this device. If your phone is not damaged physically or by water and is still under the one-year manufacturers warranty, we can review the device and your account for replacement options. You can contact us via an alternate phone at 1-800-922-0204, at a corporate store location or via the Verizon wireless forum via private message.
Just as a reminder, always make sure the following are completed before performing a factory reset when trouble shooting device functionalities :
1) Power cycle
2) Battery pull (for this device, not for all devices)
3) Ensure software is updated
4) Clear cache and browser history

Vostro 3560 - AMD Radeon HD 7670M not working

Hi guys,
I bought an DELL VOSTRO 3560 with Intel and AMD graphic card, but when I trying to run switchable graphic card, it show an error message also when I run any games like (MS Flight simulator X) it don't detect my AMD graphiv card.
also my OS is Windows 7 64bit and I upgrade all drivers.
please see attached picture after I run AMD switchable graphic:

Hi,
Let me try to clarify you. The AMD Radeon HD 7670M works with Intel HD Graphics with a technology called "Enduro" that define (by the system) which graphic will be used in determined conditions.
If you have the "Automatic Windows Update" setted "on", and like Dell did not released any new graphic driver for more than one year, your system will detect (automaticaly) new drives for Intel Graphics HD 4000 and will install them. And it's the cause of your problem. It will mess your graphics configurations.
Like Ravi Chandra stated, you may need to completely unistall all graphics stuff and reinstall last Dell's driver (http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/vostro-3560?driverId=3WKM7&osCode=W764&fileId=3147193857&languageCode=en&categoryId=VI). It will restore your system graphics funcionalities.
To avoid new issues, I would suggest you to read this thread: http://en.community.dell.com/support-forums/laptop/f/3519/t/19486888.aspx?PageIndex=1.
Me and another community member, after the procedure above, have installed AMD Mobiity Graphics Drivers (http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx) over the Dell's A04 drivers. And, after installed latest Intel Graphics updates (http://www.intel.com/p/en_US/support/detect?iid=dc_iduu).
We kept all graphics devices functionalities with completely updated drives.
Don't ask me why Dell did not release this solution. Me and the rest of world don't know.
Let we know if this solved your issue
Regards.
Marco

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Creation of a database engine for mobile devices using j2me

am trying to develop a database engine for mobile devices.. it is to develop a miniature version of the DBMS that
can be deployed on a mobile phone..I have to develop my own code for performing tasks such a s creating a table,
inserting values into it, selecting from it etc..
I limited my self to develop the software so that it can perform 3 functionalities of create, insert,select..
I should be taking the details such as table name and its parameters from the user and then should be able to
create a suitable data structure for it(i tried to develop a class)...
Usage of RMS package helps me partially in this.. I did that and ll be doing that..
I got stuck while developing the code for creation of a table.. I am facing problems in creating a dynamic data
structure for a table and also to use such data structure else where in my project..
I need help in developing an algorithm for this..
I would be very grateful to u all if u help me out in developing the code for this project..

I'm sorry for the amount of time it took me to get back. Derby is an open source database written entirely in Java. I do not know if it can support resource constrained devices like MIDP compliant, but may work okay with CLDC.
But outside of Derby being a solution, let me give you a few ideas off the top of my head.
Set up a database server in a separate thread. This server will really be your controller for RMS access.
Since RMS is just a big sequential 'pipe' you will have to think of data as 'frames' - (starttable) (tableID) (tablename) (data) (tablename) (data).....(endtable).
When you need to write additional data, just append it to the end of the RMS object.
When you need to retrieve data, thing are more complex.
1. Read in all data, looking for your particular tableID. This may be made much easier using RMS filters - (I'm not sure, I've never used them)
2. Once start of table of interest is found, stick the data elements in either a java vector or array until you reach the table end identifier. I think vector will be a better choice - trust me. (I think its available in J2ME...)
3. Package this into a do while loop until the element you are searching for is read. If you need to do some sorts on the data or something else that requires the all the data to be present then you need all the data for that particular table. One thing will always be clear. The first data you grab will always be some start table identifier and the last data you grab will be an end table identifier. We just don't know which table because of how we put stuff in the RMS resource.
This provides you a few positives as well as negatives:
Positive:
1. Fast data writes, no need to search for a particular table before accessing it, nor do you need to search for an index in that table.
2. When looking for data, data may* be found without searching through the entire table. This is accomplished with RMS filters or logic test within the RMS read loop.
Negative:
1. Slow when all data of a table is needed (i.e. compute sums or averages of entries). The entire RMS database must be read to ensure all the entries are searched. An example of how this is a problem is as follows: You have 5000 entries in you RMS database resource and you are looking to compute the average of a value in some table. When you first wrote the data to the table, it was done sequentially and no other data for that table exist. But we can't tell if that's the case, so we have to read through all 5000 entries to make sure we looked for every piece of data.
Beacuse of this issue, this database structure, performance may be fine for 50K - 100K entries (depending on table element size), if the reading requirements don't force full data reads. Otherwise, 25K may be an upper limit.
I hope this helps.
Edited by: estarkey on Mar 17, 2009 9:15 PM
Edited by: estarkey on Mar 17, 2009 10:01 PM

Goods receipt via RF devices

Hello,
There would have been many threads on GR by RF devices however the company which we are implementing SAP WMS (ECC 6.0) currently works with more advanced WMS solution and we have a task in hand to at least match the functionalities which it is providing.
Currently the GR is done via RF( Handheld Device) where a Warehouse Operator /GR Clerk scan's the incoming Vendor label (Packing/ HU) and all the information of Material, Qty, SKU, Batch (Vendor) ,Lot number , Serial number etc are captured against the PO (in ERP) and post the document. This would generate labels (optional) which normally is Barcoded and would have details like Material Number, Vendor Batch , Batch (internal), Qty, SKU, Palletization info and much important the Move Order info ( Source & Destination Bin) etc.
Now with SAP the company needs us to map a similar functionality.
1) Company do not want to go with HU mgt.
2) They are largely to use the T code MIGO and not inbound deliveries.
My Question to the group is as below.
1) Is there a possibility to update the Batch (Internal or Vendor) info using RF scanners if I use Inbound delivery.
2) Option to update the serial number ( T code LM80 option we already have tested and it is working with delivery this stops at IM level) however the need is to have this Serial Number info carried all along in warehouse (traceable) wherever we move the material.
3) If Organization does not go with Inbound Delivery what would be best way to post a GR via RF (custom built T code attached to RF). Should we use BAPI if so what BAPI is best fit.
4) Use of RF in internal warehouse material handling e.g. Bin to Bin transfer ( without using SAP front (Mvt 999) end to create a TO)
Thanks in advance

1) you need to create custom RF Tcode where you can design a screen to enter the batch and update it.
2) Serial number is at IM level, if you want to trace it at the WM level then you need to go for custom program.( In standard it is not possible to track serial number at bin level)
3) try doing research on LM71, LM72, LM73, LM74. LM76.
4) There is not standard RF tcode to create TO, you need develop a custom Tcode.
You need to sit with business to design the screens of this Tcode( mandatory field would be material, source storage, bin, destination storage, bin, SUT, )
you can call function module L_TO_CREATE_SINGLE)

SODA - Service Oriented Integration of Medical Devices in Hospitals

In this thread I will write about my dissertation project. It addresses the problem of the integration of medical devices with their proprietary interfaces and data models into the existing hospitals´ IT infrastructure.
Interoperability is an almost non-existent feature of medical devices. The consequences of non-interoperable devices in hospitals are manifold. Medical data produced by devices cannot be directly integrated into hospital information systems for medical documentation. Thus, important data will be lost and examinations have to be repeated if required information is not available due to incomplete documentation. In addition, the documentation quality is affected by human errors due to manual nonelectronic steps and media discontinuities. Another example is maintenance. Medical devices have to be maintained at regular intervals. Thus, an inventory of all devices, their status and maintenance intervals is needed for generating a maintenance manual. Currently there is usually no possibility for automatically getting a detailed inventory of all medical devices in a hospital (or section of a hospital).
The market size in conjunction with a multitude of companies and products (the DIMDI information system contains data about 60,000 medical devices) results in challenges concerning interoperability due to different proprietary hard- and software interfaces, data structures and semantical interpretations. Initiatives like IHE (Integrating the Healthcare Enterprise) are trying to push standardization in the medical sector. However u2013 as mentioned above - the current situation is still unsatisfying and increasingly getting worse due to the continuously growing number of medical devices and associated interfaces.
A promising approach for overcoming interoperability issues is the service oriented device integration, also known as SODA (Service Oriented Device Architecture). The basic concept is the encapsulation of devices as services, analogous to enterprise services in service oriented architectures (SOA). An enterprise service is a software component that offers a business functionality on a highly semantical level by specifying the interface in a standardized way (e.g. by the Webservice Description Language u2013 WSDL). Highly semantical level especially means, that a service is self-descriptive in a way that it can be consumed dynamically and loosely coupled by other components with a consistent understanding of shared data. In the medical domain a device service for instance could offer functionality for measuring the current blood pressure of a patient. Based on such basic services more complex services (like a patient monitoring system) can be realized.
The main advantage of the service oriented approach is that the manufacturer-specific device interface does not have to be known by the service consumer and by the programmer respectively, as it is encapsulated by a standardized service interface. This enables the extension of IT supported medical processes by devices, e.g. by using the Business Process Execution Language (BPEL). In addition new functionalities could be added to the device service that are logically related to the device but not offered by the device itself (e.g. tracking & tracing functionalities); so the device service can be considered as a virtual device. Therefore software maintenance will become easier, because the service interface remains unchanged in case of a device exchange or device interface changes. In my dissertation project I will explore the advantages and obstacles of the SODA concept in comparison to existing approaches for integrating medical devices in hospitals.
The SODA approach is in accordance with the SAP Enterprise SOA (ESOA) strategy. For instance, the scope of the Healthcare Community Definition Group is to further enhance the Enterprise Services (ES) Bundles Patient Administration and Medical Activities, Patient Billing and Invoicing and to define a new ES Bundle on Medical Documentation. SODA projects define services for devices. These services can use or combined with Enterprise Services, e.g., for Patient Administration. In the EU funded project SOCRADES, SAP Research explores the SODA approach in other domains, especially industrial automation.

Hmm, perhaps your other discovery settings are configured that it'll get the OOB OU because you're OOB OU is under some other OU that's configured to be discovered and you have the recursive and group settings turned on, CHECK this first.
Remove the OOB from your discovery. For testing purposes, remove (delete) one or more machine objects from the ConfigMgr console, wait a while and then run the AD System Discovery again and check what object gets there. AD system discovery shouldn't look
objects from other OUs than the ones you've specified in the discovery settings.
I'm not that familiar with vPro, so the behavior you're seeing might well be the default, but I doubt that.. Doen't make sense that you control your computer objects.
For more information you could also post adsysdis.log from the configmgr server.

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

Magic Mouse under Win7 - full functionalities

Dear all,
I don't have a choice - my company runs Win7.
Nevertheless, I don't want to miss my Magic Mouse and my Apple Keyboard that I know from my home devices.
To connect the Mouse with my Dell Nogebook hasn't been a challenge but, I miss functionalities like the move with fingers - so far only right & left (double) clicks work fine.
Can anybody help / advice what to do to obtain full functionalities of my Magic Mouse under Windows 7?
Thanks a lot in advance from Germany!

bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
https://discussions.apple.com/thread/4079148
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp.
Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly.
My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
As soon as I enabled the Windows Wireless Service, the problem came back.
Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Wireless Connection problem using windows in a Mac.

Configuration details for RFID devices in warehouse while delivery

Please suggest me some configuration details for RFID devices in warehouse while delivery .
Regards,
Manish

I read the "Config" in "– Once the Non-Cisco Devices are moved to the managed state, it triggers the MIB II level of Inventory for Inventory, Config and Image Management support and data collection." as "config management", meaning any retrieval of configuration informations possible through polling MIB II.
OTOH, the "Config" in "– Config and SWIM functionalities are not supported. Only system and interface information (MIB II) is collected for Non-Cisco devices through Inventory." is probably referring to the act of deploying/pushing configurations to these non-Cisco devices.

Labor Management Functionalities

Hi Experts ,
Can any one let me know if we can perform the Labor management functionalities in ECC 6.0 with or without RF Devices.Your comments will be appreciated.
<b>Labor Management</b>
1 Engineered standards for tasks
2 Discrete standards for tasks
3. Timestamp start/stop for all tasks
4. Visibility and reporting by employee(s)
5. Visibility and reporting by tasks
Regards
Albert

Albert:
Where you able to find any information related to your subject.
Our company is also wanting to get familiar on how to control employee productivity via labor standards versus information captured from our RFID warehouse devices.
Any information on this will be appreciated.
Thank You

MegaSky 580 - Presto! Error message "The device is not ready"

Error message "The device is not ready. Please check whether your device is connected correctly."
I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message.
If I plug off the usb stick, presto! Do not see the device anymore
I did have this problem since the beginning, I did try a lot ,
I install also the updates for the “digital TV usb min receiver” and the updates for the presto software (from the presto and msi homepage).
But nothing was helping.
After a couple of weeks I needed to reinstall the laptop from scratch.
And the first thing that I did was trying the presto software again, and it was working everything fine.
After a couple of weeks I install some other stuff and all of the Microsoft patches,
And I did get the same problem back.
So it seems that something is disturbing the communication between the USB stick and the presto software, but what!
The usb stick is working finr, I did try it with a powercinema trial version, and it is working, but why the OEM software of the USB stick not working, I hate it!
It would also helpful, to get a kind of log functionalities, due to the fact,
that no logs are available! Maybe somebody knows kind of switch to increase the verbosity and get an error log?
I have seen the same problem in this and other forums, so I’m not the only one.
But no solution found, maybe someone has found it…..
System:
HP nc6120 laptop
XP SP2 all security patches installed

ilko_t
The Acer laptop, whic works with Mega Sky 580, is a celeron, can´t remember the exact spec., 1,5 Ghz, 1G DDR
Think my faulty computer is similar to the one (B) you described... is it a Dell thing?
Quote from: ilko_t on 20-June-06, 21:40:59
I am having the very same problem:
3 Systems:
A- Desktop MB-Abit AN7, AMD Athlon 3000+ - working fine with all software and drivers updates. All aviable XP updates applied. XP Pro SP2
B- Laptop Dell Dimension 6000, Intel Centrino, 1.6Ghz Mobile, 512MB DDR2- cannot get it working- tried all aviable updates, all XP updates applied, XP Home SP2, Intel Chipset drivers- newest, says every time "The device is not ready. Please check whether your device is connected correctly."
C- Desktop Intel P4 3.0Ghz, 512MB RAM, Intel chipset- was working first 2 or 3 reboots then the same problem "device not ready", all updates, all XP updates, all motherboard updates, XP Pro SP2
On systems B and C the tuner is recognised properly in Device Manager and correct drivers installed(the newest from MSI+software patch)
The only logical conclusion I can make at this point is that there is something to do with the chipset make, as it works just fine on AMD and on Intel it won't, using the same software+drivers.
Any other ideas? Or just dump the thing in the bin

RF Device Functionalities?

Similar Messages

Maybe you are looking for