RF Queue not determined in the transfer order

Hi we are using RF queues as a part of effecient picking.
The problem I am facing is that the transfer order created is not showing up the queue as desired.
I have maintained the following settings in IMG
1) Define queue for warehouse number.
2) assign areas and activities to queue - Here I have maintained data such as warehouse number, prepration screen for stock removal, transfer type A, Source storage type ***, Source picking area ****, door and Queue.
3) lastly I have assigned users to the defined queue.
Now since the TO created is not determining the queue, as a result of which the users are not able to see them in the RF queue maintained in their profile.
I am not aware of any other setting which is suppose to be done for this purpose.
Please let me know if anyone has a solution for it.
Thanks.

Hi,
for source storage type do not use wild card (***). You can use it for destination storage type in case of stock removal.
In my production system it works fine.
Andrzej

Similar Messages

Condition type not flown(not determined) into the sales order

Hello Experts,
There is one discount condition type which is having proper condition records, validity date.However, it is not getting determined properly and is not flown into the sales order. the user wants to know why this may happen.I tried to reason it may be the sales order date and the conditon record date may be different or the condition record is changed after the creation of the sales order.neither of the reasons seem to hold good. any ideas?
Regards,
Raj

Hello,
I have looked into the analysis and asked him to update the condition by clicking on that.also, I found that the condition record is having a proper valid date. now the user would update only after knowing the exact reason why it did not flow into the sales order,he knows he has to update the condition but would not do so till he knows the right reason why condition is not determined in the sales order. now this is the situation.
the probable reasons as per analysis of the conditon type are as follows(for your information). can it be one ofThere are different reasons for this:
1)The condition was deleted manually in the item condition screen.
2)The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again. them?
Regards,
Raj.

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Partner function SP determine in the sales order

Dear SD Gurus,
I want to determine the partner function SP in the sales order, when not entered anyvalue, the sales should give incopleteness check.
But what the client here wants is that, sometimes the client wont enter any value on the sales order,so he will deleted the automatcally determined part function on the partner tab of the sales order header.
Here the partner function should be not mandatory (because when the client wants to deleted the line ofn the header tab,system doesnt allow to do it). Also the partner function should not be not modifiable, because he may want to change it when sth wrong has been entered.
So to automatically determined the partner function on the sales order,either modifiable or mandatory should be selected as I know.But when both are selected, this is not a good way for usage.
Do you have any suggeston to make this partner functon automatically determine on the sales order and when wanted, deleted?
Thanks
Jack

Hi,
Try this way and see whether it's what is require by the customer.
First of all what is this Partner function your talking about?
Can you maintain this Partner function for each customer? If possible you can try this method.
Go to below IMG path:
Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Customer Master
Then highlight the "Partner Determination Procedure"
Double click on "Partner Functions in Procedure" node
If you haven't maintained your partner function there, add it
Set it Mandatory if you want it to be set mandatory for each customer.
Save
Then go to below IMG path:
Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Sales Document Header
Highlight the relevant Partner Determination Procedure for Order Header
Double click on "Partner Functions in Procedure" node
Add If you haven't maintained your partner function there, add it
Don't Mark it as mandatory or not modifiable
Save
Now go to you customer master from XD02 transaction.
System will ask you to add new partner function as it is Mandatory.
Now create a Sales order from that customer.
System will automatically copy that Partner function to you Order Header.
If user wants to delete it, he can delete it from there.
If user want to change it, he can change it from there.
Hope this helps !
Best regards,
Anupa

Billing tab of BP are not populated in the sales order automatically

Hi
Business Partners Billing Tab details like customer pricing procedure, currency, price group, Customer group etc are not populated in the Sales order automatically?
I have checked the pricing procedure determination also.
Thanks

Thanks problem is solved.

ES_SAPMV50A-OP of delivery not triggered on WM transfer order in upgrade

ES_SAPMV50A - enhancement FCODE_BEARBEITEN_03 is not called for delivery when the transfer order is created.
earlier system was 4.5, the same config worked in it.
however in upgrade, when the WM transfer order is created the output is not generated.
After creation of transfer order, if one goes in the delivery VLN02 the output is generated.
Pls help
Regards
Meghana Munj

Hi,
no, unfortunately I found no other solution than the approach described in the original thread - but for my requirement, it works fine.
Rudi

HOW SHIPPINS POINT IS BEEN DETERMINED IN STOCK TRANSFER ORDER IN A COMPANY

HOW SHIPPINS POINT IS BEEN DETERMINED IN STOCK TRANSFER ORDER IN A COMPANY

Shipping Point determination will be based on 2 configurations
(1) based on the combination of Shipping Condition (Customer Master), Loading Group (Material Master) and Plant.
(2) based on the combination of Shipping Condition (Customer Master), Loading Group (Material Master), Plant and Storage Location.
However you need to check the configuration of delivery type whether the rule assign is (a) Plant-specific Shipping Point determination or (b) Storage Location-specific Shipping Point determination at the following path: SPRO=>IMG=>Logistic Execution=>Shipping=>Basic Shipping Functions=>Shipping Point and Goods Receiving Point Determination=>Set Up Storage-Location-Dependent Shipping Point Determination=>Define Rule for Determination of Shipping Point.
Hope this will help.
Edited by: ekltai on Mar 3, 2011 2:32 AM

Storage Type change in the transfer order after creation with MDE

Hello ,
With the MDE transaction ZMDETSP the transfer between storage locations is done and the transfer order created in the background.
I would like to know if in standard SAP the modification of the storage type is possible after the TO is created therefore also in MDE.
I changed the bin with LT1D but impossible for the storage type.
I know, user exits BUT there must be other solutions, no ?!!
Thanks in advance for your answer(s),
Patricia

You have to do the configuration to change the storage type in TO.
IMG>LE>WM>Strategies>Activate storage type search , Here you have to give both the storage type.
Also you need to change the storage type at the time of TO creation not duirn confirmation

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

Onetime vendor - address is not copied into the purchase order ME21N

Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB

>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM

Idocs are not processed in the right order.

Hi,
I face a problem that when there are a large number of IDocs (Inbound) posted the Idocs are not processed in the right order.
Msg type: MBGMCR
any idea how this can happen?
what is the solution?
br
Karen

No answer

I just upgraded my old versionj 3 of photoshop elements to v13 when I import photos they are not imported in the same order they are mixeds up

hi can I have a reply to above question: I just upgraded my old versionj 3 of photoshop elements to v13 when I import photos they are not imported in the same order they are mixeds up

In the documents screen - sorry, new to this so not sure if that's the right terminology... Basically the screen showing all documents, if you drag down, there should be two options at the of of the page: Date and Name. Select Name and your list should now be in alphabetic order.
Hope that helps.

Table for the transfer order

hi,
 what is the table for the transfer orders?
thanks in advance..

Hi,
Create delivery via transfer orders:
Once the order is saved proceed through the following steps. The process assumes the item has values in the warehouse bin.
VL04 Delivery due list. Run the delivery due with your order number to create the delivery
LT03 Create Transfer Order. EG. Warehouse: 101 and enter. Picking background. Save
The Transfer order should now be saved. It now needs to be confirmed.
In LT03 go to menu option Transfer Order -> Confirm Transfer Order
Enter
Save
The transfer order is now confirmed.
VL02N Delivery change. EG: Edit the delivery to do the following Pack External customer material number = COO. External delivery number Waybill number. BOL Transport tag. Carrier Header partner SP (E.G. FXP). Tracking number = Packing Unit
Pls reward points.
Regards,
Ameet

RF Queue not determined in the transfer order

Similar Messages

Maybe you are looking for