Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Hi,
My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 21fa
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: mei
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21f3
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 21fa
Kernel driver in use: i801_smbus
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
Subsystem: Lenovo Device 21fa
Kernel driver in use: sdhci-pci
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
Kernel driver in use: rtl8192ce
lsmod | grep sd
sd_mod 29560 4
scsi_mod 133434 2 libata,sd_mod
sdhci_pci 10834 0
sdhci 23695 1 sdhci_pci
mmc_core 82791 2 sdhci,sdhci_pci
Nothing new happens if I type dmesg | tail after inserting a card.
I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
Thank you!
Last edited by Fayden (2012-12-22 05:13:09)

In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
Install it and enables it with systemd and it should work correctly!

Similar Messages

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

Aperture does not detect CF Card

I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
Any ideas?

Does the card show up in the Finder? I suspect this isn't an Aperture issue.

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Photoshop CS5 64-bit does not detect Video Card

I just updated from CS4 to CS5. I have a core i7 with an ATI HD 5700 series graphics card with the most recent driver 10.9. Photoshop is also updated to 12.0.1. For some reason, only the 64-bit version does not detect the graphics card. Photoshop CS4 64-bit and Photoshop CS5 32-bit see the graphics card fine. I noticed a few others have had the same issues. Has this problem been addressed yet? If not, is there a workaround?

It's a recently-reported issue with Catalyst 10.9 on the Radeon 57xx.
See this thread: http://forums.adobe.com/message/3184458
-Noel

Openfiler does not detect NIC cards

Hi,
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.
http://www.oracle.com/technetwork/articles/hunter-rac10gr2-iscsi-101317.html
Any help please.
Thanks
A/A

asgar_amin wrote:
During installation of Openfiler on a Dell T410 with two network cards, the install didn't prompt for network configuration as per the following article.A year old article - a very long time in the rapid evolving life cycle of Open Source software. Which means the article may only be correct for the exact versions of the kernel and s/w installed as mentioned in the article.
Is there an alternative to openfiler that I can use? To be honest - you need to rethink your attitude if a simple issue like this, s/w not behaving as a year old article stated, is a show stopper.
Have you bothered to look at the OpenFiler documentation? There are installation and configuration guides. Have you confirmed that your platform's NICs are working?
Very likely the problem at hand is due to ignorance. And unless you can discard that, proclaim yourself knowledgeable about OpenFiler, you should not consider binning a s/w product because of your inability to configure it.

Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit

I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....

I have a MSI z87-GD65 and I cannot get the computer to reboot.
I am on a fresh windows 7 install.
Specs
i5 4690k
EVGA GTX 670
EVGA 750w
G skill 2x8gb 2400
samsung 250gb ssd
Did:
Latest bios update from msi
CMOS reset
Latest Intel ME driver from msi

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

HOST command does not seem to work in deployment system

I am developing forms software for a SUSE Linux system, but the HOST command does not seem to operate correctly when used in conjunction with Application Server.
All I am trying to do is launch Adobe Acrobat reader as a background job using the command :-
HOST('/opt/Adobe/Reader8/bin/acroread &');
but nothing seems to happen.
If I enter the command :-
*/opt/Adobe/Reader8/bin/acroread &*
directly from a shell window (using the same login account) the command works correctly.
I have tried other commands e.g. directory listings etc and all seem to have the same problem.
Furthermore when the same form is run from the development environment using "Internet Developer Suite" it operates correctly with no problems.
I am running on a deployment system where all three tiers of oracle are on the same machine (i.e. Database, AS and web front end).
Can anybody suggest any possible causes or anything I can try to help resolve this problem ?

brian_a_j wrote:
Although I still dont understand why HOST would not work given my configuration (the Application Server and Web Browser operate on the same machine).One little test, put the execution command in a shell script and try to execute the script with the HOST command instead of the command itself.
Using HOST the script will be executed on the AS machine no matter from where it is executed.
Tony

After the publication on the hosting page does not open, and the empty html. What's the problem?

After the publication on the hosting page does not open, and the empty html. What's the problem?

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Interface Controller does not exist

Having implemented Compliance Calibrator 5.3, I've configured the JCo and am getting the following error message below.
WARNING: *** Job Exception: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
I have searched the forum and found only one other message pertaining to this issue. I need to figure out how to address this error. Here is what I have done already:
1. Tested the JCo - it tested and pinged properly
2. Tested the RTA user - the user has the necessary authorizations
I'm considering deleting and recreating the connector, but I don't see the point as the connector obviously connects to the backend. I know this because I had some RFC errors that disappeared when I granted the authorizations to the user specified in the JCo.
Please let me know.
Thanks,
Santosh

Here you go.
Row     VSYSKEY SYSNAME SYSTYPE SYSCON1 SYSCON2 SYSCON3 SYSCON4 SYSCON5 STATUS MGMTRLVNT       SYSCON6 SYSCON7 SYSCON8 SYSCON9 EXTOBJ
1       SANDBOX1        SB1     SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N
2       SB3     SANDBOX3        SAP     JCO     VIRSAXSR3_03_MODEL      VIRSAXSR3_03_METADATA   JAVA            0       0       rdgspd2s                                N
3       SANDBOX2        SB2     SAP     JCO     VIRSAXSR3_02_MODEL      VIRSAXSR3_02_METADATA   JAVA            0       0       rdgspd2s                                N
4       SANDBOX Sandbox environments    LSYS    SANDBOX SANDBOX                         0       1
5       SB2_RE SB2_RE SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Wism controller does not show url redirection spalash page

Hi
Wism controller does not show url redirection/splash page .
client takes the ip from the dhcp server. when browsing its not going to the authentication page as usual
Thank you

Can you elaborate on your issue... really hard to follow. To me, it seems like you want to use a guest splash page. The client associates to the open guest ssid and get's an ip address. Now the user has to open a browser to get the portal page correct? This has nothing to do with the WLC, but the OS on the device. Some devices can detect if no internet is present after authentication and obtaining an address. This means the device will automatically open a browser to present the user with the splash page. Other devices will require the user to open a browser to get the login screen.
Scott

Specified Host Directory does not map to your Site Address

I have defined my site using ftp in the Dreamweaver site definitions and I can connect to it and upload changes with no problem. I am now trying to setup InContext editing capability to the site. When I go thru the steps to add a site in the InContext Admin section, the first steps in the process work fine. I am able to fill out the ftp settings with my username and password and when I test the settings it comes back that it is able to connect to the site. The next step is where I run into problems. When I try to add the assets I get an error that says "The Specified Host Directory does not map to your Site Address". I can use the same username and password with an ftp Client program and I have complete access to the root folder and all the files in it. I have used exactly the same Host DIrectory in both my Dreamweaver Remote Setup and in InContext Admin. Why does it work with Dreamweaver uploads and it can not be used to register in InContext?
My site is www.sonautosales.com and my root folder is defined as /www.sonautosales.com/
I have included a screenshot of the error message.

Hi Corey:
I just went thru the entire thread trying all the suggestions but
still no luck. The closest I come to getting this registered is using
the following settings.
ftp host:               ftp.prioritysalesandservice.com
Passive ftp:          unchecked
Username:          prioritysales
Password:          ****          (I do not mind sending you the password if it will
help you solve my problem)
This tests good all the time.
Host Directory:     /www.prioritysalesandservice.com/          (This is the folder
name that contains my website and in it is the index.html page)
Image Directory:     Images/                                        (the folder name inside the host
directory that contains my images)
Default Page:     Default.htm Default.asp index.html index.htm index.php
index.cfm
I think the host directory I am using because when I put that in and
then use the browse button to find the Image directory it shows all
the files and folders in my Host directory
The website address is:     www.prioritysalesandservice.com
Please let me know anything else you need, again I have tried all the
things mentioned in the thread and by using these settings I get the
following error when I save:
The specified Host Directory does not map to your Site Address (URL)
THe "/www.prioritysalesandservice.com/" host directory could not be
accessed through this Site Address (URL):
"http://www.prioritysalesandservice.com/"
Thanks for you help, hope you can figure it out.
Steve

Ask for help :( "%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good"

This question is used a translator....
Current conditions
- SW1 ----- Power injector ------ AP(cisco is not another model)
- Port, AP, Power injector, Switch <-> Injector UTP cable Problems occur even after replacement
- Power injector <->AP UTP canle No exchange
- Poe was OFF the function. This is because it is being used for Power Injector. -> Do not generate failure logs
- But even if another AP is turned ON POE function, no error messages.
SW1#show logging (5 mins cycle persists)
May 4 10:37:32.527: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good
May 4 10:37:42.556: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:43.562: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:50.032: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to up
May 4 10:37:52.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to up
May 4 10:38:03.238: %ILPOWER-7-DETECT: Interface Gi1/0/17: Power Device detected: IEEE PD
SW1#show cable-diagnostics tdr interface gi 1/0/17 <----- Issues AP
TDR test last run on: May 04 10:49:14
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/17 1000M Pair A 84 +/- 10 meters Pair B Normal
Pair B 84 +/- 10 meters Pair A Normal
Pair C 84 +/- 10 meters Pair D Normal
Pair D 84 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/18 <--------- Normal AP
TDR test last run on: May 04 11:01:04
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/18 1000M Pair A 92 +/- 10 meters Pair B Normal
        Pair B 92 +/- 10 meters Pair A Normal
   Pair C 92 +/- 10 meters Pair D Normal
      Pair D 92 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/1 <--------- Normal AP
TDR test last run on: May 04 11:01:56
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/1 1000M Pair A 79 +/- 10 meters Pair B Normal
   Pair B 79 +/- 10 meters Pair A Normal
      Pair C 79 +/- 10 meters Pair D Normal
    Pair D 79 +/- 10 meters Pair C Normal
SW1#show power inline <-------- (Check every 5 seconds)
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 200.2 169.8
Interface Admin Oper Power Device Class Max
(Watts)
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a    n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Ieee PD   0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Xirrus XR2426, 1.0G 0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto faulty 0.0 n/a n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a n/a 30.0

Plug the Xirrus AP directly to the switch port and see if the logs go away or not.

Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

Similar Messages

Maybe you are looking for