RMAN-06403 When registering remote target DB

I'm running Oracle 10.2 Enterprise on RHEL4 (local pc) and Solaris (target db). I have a test db locally on my PC. I established the recovery catalog and successfully tested out backup functionality on my local test db. Now, I reset my SID and attempt to register a remote target database from within RMAN, I get the below error:
[oracle@tony dbs]$ rman target / \ catalog rman/rman@t_dev
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Jun 25 16:04:41 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
connected to recovery catalog database
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 06/25/2007 16:04:45
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
The recovery catalog database is running. The target database is also running. I can tnsping the target database and also connect via sqlplus with the connect string username/password@target_db.
Why am I generating this error connecting to a remote db in rman?
Thanks.

I get the below error when I grant sysdba & sysoper to rman. This was suggested in another post:
SQL> grant sysdba to rman;
Grant succeeded.
SQL> grant sysoper to rman;
Grant succeeded.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[oracle@tony dbs]$ rman target sys/oracle@es_dev catalog rman/rman@t_dev
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jun 26 17:19:22 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges

Similar Messages

  • RMAN catalog fails to show target database information when in nomount mode

    Hello everyone, I am trying to restore a dev. database from its own backup taken a week back. The DB is in noarchivelog mode and recently 2 of the datafiles were removed from the files system and thus the need to restore the DB from its backup. However rest of the files and control files are intact.
    Now, when I put the database in mount mode and connect to the catalog then I can see the DB's incarnation;
    :->rman catalog cde01_rman4/xxxxxxx@prman10g target /
    Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 11 13:54:40 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: EGVBFI2 (DBID=4238332493, not open)
    connected to recovery catalog database
    RMAN> list incarnation;
    List of Database Incarnations
    DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
    84789 84883 EGVBFI2 4238332493 PARENT 2478183021921 17-JAN-04
    84789 84790 EGVBFI2 4238332493 CURRENT 2498633332010 10-OCT-07
    RMAN>
    However I am not able to see DB incarnation in the RMAN catalog if I put the DB in nomount mode (which is required to recover DB);
    :->rman catalog cde01_rman4/xxxxxx@prman10g target /
    Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 11 13:58:29 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: egvbfi2 (not mounted)
    connected to recovery catalog database
    RMAN> list incarnation;
    RMAN>
    Please advice?
    Thanks,
    Jairaj

    Hi,
    You won't be able to see incarnation information when the DB is in "nomount" since the incarnation is written in the control file. I don't think the catalog has this information.
    Anyway, in order to restore datafiles, the instance must be mounted, so you should be OK.
    Mount the instance and just restore the datafiles.
    Liron Amitzi
    Senior DBA consultant
    link: [www.dbsnaps.com]
    link: [www.obriumsoftware.com]

  • Using rman to backup a remote database

    I am after a good guide or advice on how (what) to install and (how to) run Oracle RMAN
    to backup a remote Oracle database.
    RMAN must be installed and run on a Solaris (SunOS 5.8) box remote from the Solaris
    box (also SunOS 5.8) running the Oracle database but connected to it via a TCP/IP
    network.
    The Oracle Recovery Manager and Database version is 9.2.0.1.0.
    RMAN must perform the backup of the remote database over the network and store
    the backup on a disk local to the RMAN box.
    The backups may be full or incremental and may be "hot" backups taken while the
    Oracle database is open.
    The disk files are to be then backed up to tape using Veritas.
    What software do I need to install on the RMAN box ?
    What software do I need to install on the remote Oracle database box ?
    Thanks,
    Brett Morgan.

    writes to a NFS-mounted diskRman is writing to disk or tape (when is bundled (libraries needed) with some backup software for tapes such as Veritas). The disk device could be local, or mounted disk form other host or storage (over NFS as Werner mentioned, SMB and others).

  • Grid 10gr2 cannot comunicate with database in remote target

    Hi Masters,
    We have Grid Control 10gr2 running on Linux RH 5, monitoring many targets (with databases and so on), and working successfully.
    But we have a remote database Oracle 10.2.0.5 on Solaris (SunOS 5.9), running Oracle Agent 10g the can not communicate !!!!
    Status from remote target :
    oracle/app/oracle/oms/agent10g] emctl status agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.5.0
    OMS Version : 11.1.0.1.0
    Protocol Version : 11.1.0.0.0
    Agent Home : /oracle/app/oracle/oms/agent10g
    Agent binaries : /oracle/app/oracle/oms/agent10g
    Agent Process ID : 10821
    Parent Process ID : 10814
    Agent URL : https://srv1:3872/emd/main/
    Repository URL : https://srv2:4900/em/upload
    Started at : 2012-04-27 17:20:17
    Started by user : oracle
    Last Reload : 2012-05-04 11:52:00
    Last successful upload : 2012-05-30 15:41:09
    Total Megabytes of XML files uploaded so far : 348.02
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 86.81%
    Last successful heartbeat to OMS : 2012-05-30 15:44:37
    Agent is Running and Ready
    /oracle/app/oracle/oms/agent10g] emctl upload agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    EMD upload completed successfully
    Status on Grid Server :
    The database keeps showing status of "configuration" on Grid panel, but when I try configure it the grid returns the message :
    Error occurred while getting information for the specified target. Possible reasons include: the target doesn't exist; connection to the target failed.
    Any help are welcome !
    Regards,
    Alex.

    After selecting configure in the host text box just try and replace the IP address with the hostname of the node having the 10g database. Do update

  • RMAN-06403: could not obtain a fully authorized session

    Hi,
    I am trying to duplicate 10204 instance with ASM to clone machine .
    I have checked that i can connect to the target / aux / rman instances before runing the duplicate script as you can see bellow.
    Also i checked that the Env. variable are correct :
    $ ps -ef | grep pmon
    oracle    5157     1  0 Feb16 ?        00:00:17 asm_pmon_+ASM
    oracle   30838     1  0 17:15 ?        00:00:00 ora_pmon_b3dev
    $ echo $ORACLE_HOME
    /software/oracle/B3DEV10gR2
    $ echo $ORACLE_SID
    b3dev
    -- AUX
    $ sqlplus sys/xxxx@b3dev as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:25 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    -- TARGET
    $ sqlplus sysxxxx@MYB3PROD as sysdba                  
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:44 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    -- catalog
    $ sqlplus catman_b3prd/xxxxx@rman
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:59 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing optionsI opened the AUX instance in NOMOUNT mode , and then run the rman script.
    rman TARGET sys/xxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
    RMAN>
    run
    allocate channel 'dev_0' type 'sbt_tape'
    parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=b3prd,OB2BARLIST=b3prd)' maxopenfiles 16;
    set until time "to_date('17-11-2010 10:45:00','dd-mm-yyyy hh24:mi:ss')";
    duplicate target database to b3dev
    PFILE = /software/oracle/B3DEV10gR2/dbs/initb3dev.ora
    NOFILENAMECHECK;
    }Then I got the following error:
    Starting Duplicate Db at 21-NOV-10
    released channel: dev_0
    released channel: dev_1
    released channel: dev_2
    released channel: dev_3
    released channel: dev_4
    released channel: dev_5
    released channel: dev_6
    released channel: dev_7
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 11/21/2010 17:14:20
    RMAN-06403: could not obtain a fully authorized session
    RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not availableThanks

    Thanks ,
    But its not seems to be my case:
    SQL> startup nomount pfile='initb3dev.ora';
    ORACLE instance started.
    Total System Global Area 1073741824 bytes
    Fixed Size                  1271616 bytes
    Variable Size             301992128 bytes
    Database Buffers          763363328 bytes
    Redo Buffers                7114752 bytesrman TARGET sys/xxxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
    Recovery Manager: Release 10.2.0.4.0 - Production on Sun Nov 21 17:34:27 2010
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: B3PRD (DBID=3967311322)
    connected to recovery catalog database
    connected to auxiliary database (not started)
    No problem to connect using sqlplus with @ .
    No problem to connect with RMAN , to target/AXU/RMAN catalog
    Yet , i am still getting the error message
    Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Remote target is missing required components

    Hello,
    I am working on data acquisition using labview and cdaq 9191 chassis + 9234 module by using DAQ Assistant.
    The DAQ Assistant captures data from the chassis, feeds it into a shared variable and then the VI deploys it over a network.
    This worked perfectly about 4 months ago. After That I uninstalled LabView and other drivers.
    After reinstalling the whole setup again now when I create a new project and try to put DAQ assistant in the VI, it gives an error - "the remote target is missing required components".
    What might have caused this problem?

    Hey Egupta,
    What versions of LabVIEW and the DAQmx driver are you using?  You can check this by going into Measurement & Automation Explorer and expanding out the Software tab.  
    Are you sure that you installed the DAQmx driver after you installed LabVIEW?  It might be worth reparing the driver if you are unsure and we determine that they are compatible versions. 
    KiraT

  • How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network?

    How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network? The actual remote doesn't work anymore, so I've been using the remote app on my phone but now that our internet changed, I can't do anything at all. Please help!

    You can't use the remote app to setup a network. If your physical remote isn't working you will need borrow another or purchase a replacement.

  • Error when registering a portlet provider

    I got the following error when registering a new portlet provider:
    An error occurred when attempting to call the providers register function. (WWC-43134)
    The following error occurred during the call to Web provider: 301: Moved Permanently (WWC-43147)
    May I know what I may have done wrong?
    I was able to open the portlet provider page by itself
    Thanks

    Can you double check whether the provider node is accessible from the portal middle tier (ping)?

  • Printing to a Printer Connected to TIme Machine when using Remote Desktop

    Hi,
    I am having trouble printing to a printer connected to our wireless network via Time Capsule when I am on my remote desktop connection. Printing from all other programs work. I downloaded Bonjour on our Windows based server, and it did not detect any printers. When I am connected directly to the printer, I can print when using remote desktop. Any suggestions are much appreciated.
    Thanks!
    Mac OS X (10.5.4)

    Airport Extreme/Express do emulate Jetdirect/port 9100 printing, but that isn't what they use for printing from OS X. OS X and the Bonjour/airport software use USB port redirection, a unique and separate method.
    If the HP driver supports any protocol over ethernet, it would be appletalk. Does that router server use appletalk?

  • When registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem?

    when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
    thanks

    Is the English sim from the original carrier as that is usually the message you get with a carrier locked phone.

  • 32bpp application doesn`t display correctly or crashes when we remote via SCCM 2007 remotetool

    By default remotetool’s Color Depth is set to 16 bpp
    Daniel
    Synapse application is a PACS viewer used by radiology department in our hospital.
    Synapse is designed to run in 32 bpp, therefore when we remote to it, the picture is not dispayed.
    Instead it displays an error Your display is configured for 65536 colors. This mode is unsupported. Use 24 or 32 colour mode.
    As soon as we disconnect or end the remote session. The picture on users workstation 
    turns black. Synapse needs to be re-launched  in order to display properly again.
    Is there a way to set the Color Depth default  on remotetool to 24bbp ?
    When we close the remote session, Synapse crashes or doesn’t display any pictures, leaving them black.
    Here’s how the user would see it
    On the other hand if we pre-set the colour depth to 24bbp before opening Synapse. Everything is displayed correctly on both admin and the remote workstation, while in a remote session.

    Yes, I know this is an old post, but I’m trying to clean them up.
    To my knowledge there is no way to do this, however I would suggest looking at remote desktop instead of CM0-7 Remote control.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Communication between Lync - Mediant . 488 evt from mediant site when SBC Remote Early Media RTP parameter is set to Delayed

    Hi,
    I have a problem with Early Media functionality between Lync and Mediant 1000 E-SBC. If SBC Remote Early Media RTP parameter is set to Delayed (on IP Profile Settings level) i cannot establish connection. After receiving 183 Session progress (from Lync site)
    call is released with 488 event (488 is sent from mediant site). Before "Not applicable here" in logs i can see:
    6d:9h:46m:35s (      lgr_flow)(18219     )  #MediaResourcesConnector::AllocateMediaResources
    (lgr_media_connector)(18220     )  MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
    (lgr_media_service)(18221     )  ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
    6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
    6d:9h:46m:35s (lgr_media_service)(18261     )  (#292) ChannelResource Deallocated.
    6d:9h:46m:35s (lgr_media_service)(18262     )  (#293) ChannelResource Deallocated.
    I need this because if im using SBC Remote Early Media RTP = Immidiately i cannot hear ringtone. Could someone give me any clues what is wrong in config?
    I enclosed detailed logs:
    Log is Activated  6d:9h:46m:35s (       lgr_sbc)(18057     )  (#51) SBCRoutesIterator Allocated.
    (       lgr_sbc)(18058     )  Classification Succeeded - Source IP Group #2.
    (       lgr_sbc)(18059     )  CallAdmission::AddDialog: Type INVITE Direction In IP group 2: 1 SRD 2: 1 SRD ovflw:1 used unres:1
    (      lgr_flow)(18060     )  (#51)SBCRoutesIterator::Change State From: InitialRouting To : AlternativeRouting
    (       lgr_sbc)(18061     )  CallAdmission::AddDialog: Type INVITE Direction Out IP group 1: 1 SRD 1: 1 SRD ovflw:1 used unres:2
    (      lgr_flow)(18062     )  (#51)SBCRoutesIterator::Next route found: Route by: IPGroup , IP Group ID: 1, Live:1
    (       lgr_sbc)(18063     )  Routing Succeeded -IP2IPRouting Rule #2.
    (      lgr_flow)(18064     )  ---- Incoming SIP Message from switch:5060 to SIPInterface #2 UdpTransportObject[#2] ----
    6d:9h:46m:35s INVITE sip:1234@Mediant;user=phone SIP/2.0
    Allow: INVITE, ACK, CANCEL, BYE, PRACK, NOTIFY, REFER, SUBSCRIBE, OPTIONS, UPDATE, INFO
    Supported: replaces,timer,path,100rel
    User-Agent: OmniPCX Enterprise R10.1.1 j2.603.33.a
    Session-Expires: 1800;refresher=uac
    Min-SE: 900
    P-Asserted-Identity: "TPSA 12" <sip:221111111@switch;user=phone>
    Content-Type: application/sdp
    To: <sip:1234@Mediant;user=phone>
    From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=434636a077aeb3418ef3d5c0887debbd
    Contact: <sip:221111111@switch;transport=UDP>
    Call-ID: 5050e7eb34568795c049d14a6b088172@switch
    CSeq: 1290334631 INVITE
    Via: SIP/2.0/UDP switch;branch=z9hG4bK668ced008893ef177292c6f0f662ca02
    Max-Forwards: 70
    Content-Length: 265
    v=0
    o=OXE 1415263596 1415263596 IN IP4 switch
    s=abs
    c=IN IP4 172.16.20.32
    t=0 0
    m=audio 32156 RTP/AVP 8 4 97
    a=sendrecv
    a=rtpmap:8 PCMA/8000
    a=ptime:20
    a=maxptime:30
    a=rtpmap:4 G723/8000
    a=ptime:30
    a=maxptime:30
    a=rtpmap:97 telephone-event/8000
    (     sip_stack)(18066     )  New SIPMessage created - #57
    (     sip_stack)(18067     )  New SIPSBCCallLeg created - #1695
    6d:9h:46m:35s (     sip_stack)(18068     )  New AcSIPCall created - #1922
    (     sip_stack)(18069     )  AcTransactionUser::AddMessageToQueue: Queueing message
    6d:9h:46m:35s (     sip_stack)(18102     )  SIPCall(#1922) changes state from Idle to Invited
    6d:9h:46m:35s (     sip_stack)(18164     )  SIPCall(#1921) changes state from Idle to Inviting
    (     sip_stack)(18165     )  SIPSessionTimer<TU#1921>::FillSTRequestData - Session-Timer mode: TRANSPARENT
    (      lgr_flow)(18166     )  ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
    6d:9h:46m:35s (      lgr_flow)(18178     )  ---- Incoming SIP Message from Lync2:5068 to SIPInterface #1 TcpTransportObject[#648] ----
    SIP/2.0 183 Session Progress
    FROM: "TPSA 12"<sip:221111111@switch;user=phone>;tag=1c1656521459
    TO: <sip:1234@Mediant;user=phone>;tag=499c98c8cd;epid=DE8F26F104
    CSEQ: 1 INVITE
    CALL-ID: 1656462877611201494635@Mediant
    VIA: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
    CONTACT: <sip:lyfe02.grupa.lukas:5068;transport=Tcp;maddr=Lync2>
    CONTENT-LENGTH: 281
    CONTENT-TYPE: application/sdp
    ALLOW: CANCEL
    ALLOW: BYE
    ALLOW: UPDATE
    ALLOW: PRACK
    REQUIRE: 100rel
    SERVER: RTCC/5.0.0.0 MediationServer
    Rseq: 1
    v=0
    o=- 89 1 IN IP4 Lync2
    s=session
    c=IN IP4 Lync2
    b=CT:1000
    t=0 0
    m=audio 52882 RTP/AVP 8 97
    c=IN IP4 Lync2
    a=rtcp:52883
    a=label:Audio
    a=sendrecv
    a=rtpmap:8 PCMA/8000
    a=rtpmap:97 telephone-event/8000
    a=fmtp:97 0-16
    m=audio 0 RTP/SAVP 8 4 97
    (     sip_stack)(18180     )  New SIPMessage created - #55
    (      lgr_flow)(18181     )  |       |(SIPTU#1921)183 State:Proceeding(1656462877611201494635@Mediant)
    6d:9h:46m:35s (   lgr_stk_ses)(18182     )  |       |       |       #1694:SIP_ALERT_EV(1656462877611201494635@Mediant)
    (     sip_stack)(18183     )  SDPBody::New - id = 126
    (     sip_stack)(18184     )  SDPBodyMedia::New - id = 541
    (     sip_stack)(18185     )  SDPBodyMedia::New - id = 540
    (     sip_stack)(18186     )  <BaseSIP SDPSESSION #1694> UpdateChosenMediaByCN - CN as Remote -1
    (     sip_stack)(18187     )  SDPBodyMedia::New - id = 539
    (     sip_stack)(18188     )  SDPBodyMedia::New - id = 538
    (   lgr_stk_ses)(18189     )  SBCOfferAnswerMngr(#1694) changes state from SIP_MEDIA_OFFERING to SIP_MEDIA_COMPLETED
    (   lgr_stk_ses)(18190     )  <SESSION #1694> SendToCall - event: MEDIA_NEGOTIATION_COMPLETED_EV  m_Call#1852
    (      lgr_flow)(18191     )  |       |       (#1852)SBCCall <- (#1694)SIPSBCCallLeg: MEDIA_NEGOTIATION_COMPLETED_EV
    (      lgr_flow)(18192     )  |       (#59)SBCCallPlacementFeature <- (#1852)SBCCall: MEDIA_NEGOTIATION_COMPLETED_EV
    (      lgr_flow)(18193     )  |       (#1853)SBCParticipantEndPoint <- (#59)SBCCallPlacementFeature: MEDIA_NEGOTIATION_COMPLETED_EV
    6d:9h:46m:35s (      lgr_flow)(18219     )  #MediaResourcesConnector::AllocateMediaResources
    (lgr_media_connector)(18220     )  MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
    (lgr_media_service)(18221     )  ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
    6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
    6d:9h:46m:35s (lgr_media_service)(18261     )  (#292) ChannelResource Deallocated.
    6d:9h:46m:35s (lgr_media_service)(18262     )  (#293) ChannelResource Deallocated.
    6d:9h:46m:35s (      lgr_flow)(18263     )  |       |       (#1853)SBCCall <- (#1695)SIPSBCCallLeg: RELEASE_EV
    (      lgr_flow)(18264     )  |       |       (#1853) SBCCall changing states from:AlertingState to:DisconnectingState
    (      lgr_flow)(18265     )  |       (#1852)SBCParticipantEndPoint <- (#1853)SBCCall: RELEASE_EV
    (      lgr_flow)(18266     )  (#1852) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
    (      lgr_flow)(18267     )  (#1035)SBCController <- (#1852)SBCParticipantEndPoint: RELEASE_EV
    (      lgr_flow)(18268     )  |       |       (#1035) SBCController changing states from:EstablishingState to:DisconnectingState
    (      lgr_flow)(18269     )  |       (#1853)SBCParticipantEndPoint <- (#1035)SBCController: RELEASE_EV
    (      lgr_flow)(18270     )  (#1853) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
    (      lgr_flow)(18271     )  |       (#59)SBCCallPlacementFeature <- (#1853)SBCParticipantEndPoint: RELEASE_EV
    (      lgr_flow)(18272     )  (#59) SBCCallPlacementFeature changing states from: Initiated to: Releasing
    6d:9h:46m:35s (      lgr_flow)(18273     )  |       |       (#1852)SBCCall <- (#59)SBCCallPlacementFeature: RELEASE_EV
    (      lgr_flow)(18274     )  |       |       (#1852) SBCCall changing states from:AlertingState to:DisconnectingState
    (      lgr_flow)(18275     )  |       |       |       (#1694)SIPSBCCallLeg <- (#1852)SBCCall: RELEASE_EV
    (     sip_stack)(18276     )  New SIPMessage created - #52
    (      lgr_flow)(18277     )  |       |(SIPTU#1921)DISCONNECT_REQ State:Proceeding(1656462877611201494635@Mediant)
    (     sip_stack)(18278     )  New SIPMessage created - #49
    (      lgr_flow)(18279     )  ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
    CANCEL sip:1234@Mediant;user=phone SIP/2.0
    Via: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
    Max-Forwards: 70
    From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=1c1656521459
    To: <sip:1234@Mediant;user=phone>;epid=DE8F26F104
    Call-ID: 1656462877611201494635@Mediant
    CSeq: 1 CANCEL
    User-Agent: E-SBC/v.6.60A.260.002
    Reason: SIP ;cause=488 ;text="488 Not Acceptable Here"
    Content-Length: 0
    (     sip_stack)(18281     )  Resource SIPMessage deleted - #49
    6d:9h:46m:35s (     sip_stack)(18354     )  New SIPMessage created - #42
    (     sip_stack)(18355     )  Resource SIPMessage deleted - #42
    (      lgr_flow)(18356     )  |       | TransactionUserMngr::ReturnTransactionUser - #1921
    (     sip_stack)(18357     )  SIPCall(#1921) changes state from Disconnected to Idle
    6d:9h:46m:40s (     sip_stack)(18358     )  New SIPMessage created - #47
    (     sip_stack)(18359     )  Resource SIPMessage deleted - #47
    (      lgr_flow)(18360     )  |       | TransactionUserMngr::ReturnTransactionUser - #1922
    (     sip_stack)(18361     )  SIPCall(#1922) changes state from Disconnected to Idle

    Hi,
    On Mediant 1000 E-SBC SBC tab, when set Remote Early Media RTP Behavior to
    Delayed, but also check if the following configuration set correctly:
    SBC Media Security Behavior: SRTP
    PRACK Mode: Optional
    Remote Update Support: Supported Only After Connect
    Remote Re-INVITE:  Supported Only With SDP
    Remote Delayed Offer Support: Not Supported
    Remote REFER Behavior: Handle Locally
    Remote 3xx Behavior: Handle Locally
    Enforce MKI Size: Enforce
    You can refer this
    link
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I put in the wrong birthdate when registering my daughter's new iPod touch. When I went to correct it, it looked me out

    I put the wrong birthdate when registering my daughters new iPod Touch. It didn't let me establish a new account because the birthdate was too young. When I went to correct it, it continued the lock her new registration out. Now I can't successfully register her on iTunes with her correct birth year.

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • Ical server error message when accessed remotely

    hello we have a 10.6.7 ical server running mostly smoothly when accessed from the LAN.
    however, when accessed remotely it generates the following error message:
    The server responded with “HTTP/1.1 501 Not Implemented” to operation CalDAVAccountRefreshQueueableOperation.
    the message provides the following 2 responses / buttons: stay offline or go online - trouble is once you click go online, it comes up with the same message again.
    unfortunately, research the error message has so far not produced any promising results, thus any ideas would be much appreciated.

    There are many reports here on this site about this, crossing different carriers and regions of the world. Consequently, the only deduction that can be made is that this is a system-level issue rather than a single user issue. Hence, what each affected user must do is contact their mobile service provider for formal support and possible escalation up to BlackBerry.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When registering for AppleCare Protection plan, they ask for proof of purchase... I threw away the receipt... What do I do?

    When registering for the AppleCare Protection plan, a section pops up requiring me to submit a proof of purchase... I threw away my receipt ): How can I register my laptop?

    Call Apple Care at 1800 SOS APPLE, usually something can be done with the serial number.

Maybe you are looking for