Rman of database under Linux from Windows server
Dear colleagues! I need some help.
I have Oracle database 10.2.0.1, which works under Linux CentOS. I've just set up rman, to backup this database to local linux partition. Now, i want to adjust rman, so it starts from Windows 2003 ( i've already install Oracle 10.2.0.1 client for Wondows 32-bit) server to backup this database to local Windows folder.Could you please answer, is it possible at all?
When i try to perform rman from Windows manually i got this errors:
channel t1: starting piece 1 at 29-APR-10
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 04/29/2010 03:07:32
ORA-19504: failed to create file "/u02/app/oracle/product/10.2.0/db_1/dbs/c:123
bak"
ORA-27038: created file already exists
Additional information: 1
1. You can run the backup from windows server 2003 which take the RMAN backup of your linux server. But this backup can only stored into your linux server.
2. You can't store the backup set of linux server into windows server.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful.
Similar Messages
-
Migration from windows server 2008 10.2.0.4 to linux as4 11.2g
Hello,
I am looking to migrate my 10.2.0.4 which is on windows server 2008 to 11gr2 which is on linux as 4.. my database size is 50gb, what is best way to perform this task, please do update me, i will be thankfull to you.
Thanks and regards
firdousHi,
Please close this thread as answered and keep updating your other thread:
migration from windows server 2008 10.2.0.4 to linux as4 11.2g
Regard
Helios -
Hello,
I'm looking to uninstall the WSUS server role 3.0 from Windows Server 2008 R2 SP1. The thing is the database is hosted on a remote MS SQL server. I want to remove the database as well. I would like help for figuring out what I need to do to completely remove
WSUS and its database.
Any kind of help is appreciated! ThanksHi,
WSUS offers limited support for running database software on a computer that is separate from the computer where the rest of WSUS is installed. This section offers step-by-step
instructions for how to install WSUS in this configuration.
If you meet the uninstall issue with the normal uninstall, please post the detail information for us but if you just want to manage the WSUS related SQL data, you can refer
the following KB then delete corresponding database.
In the general procedure, you will create the related WSUS database as below::
Run WSUS Setup from the command line, using the SQLINSTANCE_NAME=servername\instancename command-line option, where servername is the name of the remote computer, and instancename
is the name of the SQL Server instance that you will use for WSUS.
More information:
Choose the Database Used for WSUS 3.0
http://technet.microsoft.com/en-us/library/cc708452(v=ws.10).aspx
Appendix B: Configure Remote SQL
http://technet.microsoft.com/en-us/library/cc708595(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Cannot connect properly to Oracle on Linux from Windows
Good day all,
I’ve got 2 virtual machines running on my Mac:
- Centos 5.4 with Oracle 11gR2
- Windows 2003 server with Oracle 10gR2
From Linux box I have access to Oracle database on Windows box (both directly and via a database link), however from Windows I have problems accessing the oracle database on the Linux box.
From Windows, if I try to set up a connection using Oracle’s SQL Developer using connection type “Basic”, I get “IO Error: The Network Adapter could not establish the connection”. When I use “TNS”, then it works.
From the linux box it all works fine as the “oracle” user, but when I log on as another user (in this case “informatica”) it doesn’t work properly any more.
To sketch what both environments look like.
Windows:
- Machine name WS2003Ora10g
- Etc/hosts
o 127.0.0.1 localhost
o #loopback adapter
o 192.168.12.100 localhost
o #network adapter
o 192.168.12.10 WS2003Ora10g
o # external machine
o 192.168.12.110 ilmserver
- system variables
o TNS_ADMIN, set to network/admin path in Oracle home dir
listener
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-AUG-2011 17:38:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 24-AUG-2011 16:29:33
Uptime 0 days 1 hr. 8 min. 33 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WS2003Ora10g)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "ora10gr2" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
Service "ora10gr2XDB" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
Service "ora10gr2_XPT" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-AUG-2011 17:40:43
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ora10gr2" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:25 refused:0 state:ready
LOCAL SERVER
Service "ora10gr2XDB" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: WS2003ORA10G, pid: 2852>
(ADDRESS=(PROTOCOL=tcp)(HOST=WS2003Ora10g)(PORT=1031))
Service "ora10gr2_XPT" has 1 instance(s).
Instance "ora10gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:25 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Linux
- Machine name ilmserver
- Etc/hosts
o 127.0.0.1 localhost.localdomain localhost
o ::1 localhost6.localdomain6 localhost6
o 192.168.12.1 routerip rtrip
o 192.168.12.110 ilmserver ilmsvr
o 192.168.12.10 WS2003Ora10g winora
system variables (in bashprofile)_
o export PATH=$PATH:/usr/java/jdk1.7.0/bin
o export PATH=$PATH:/usr/sbin
o export PATH=$PATH:/sbin
o export JAVA_HOME=/usr/java/jdk1.7.0
o PATH=$PATH:$HOME/bin
o export PATH
o export ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
o export ORACLE_BASE=/home/oracle/app/oracle
o export ORACLE_SID=orcl
o export TNS_ADMIN=$ORACLE_HOME/network/admin
o export ORACLE_HOSTNAME=ilmserver
o export PATH=$PATH:$ORACLE_HOME/bin
Both the "oracle" and the "informatica" user have these environment variables.
listener
Logged in as “oracle” user:*
[oracle@ilmserver ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 24-AUG-2011 19:12:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 24-AUG-2011 17:30:39
Uptime 0 days 1 hr. 41 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /home/oracle/app/oracle/diag/tnslsnr/ilmserver/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@ilmserver ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 24-AUG-2011 19:13:28
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:19 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: ilmserver, pid: 9648>
(ADDRESS=(PROTOCOL=tcp)(HOST=ilmserver)(PORT=52395))
The command completed successfully
But logged in as “informatica” user I get following:
[informatica@ilmserver ~]$ lsnrctl status
bash: lsnrctl: command not found
[informatica@ilmserver ~]$ lsnrctl services
bash: lsnrctl: command not found
even though the oracle bin directory sits in PATH.
Pinging from windows:
C:\Documents and Settings\Administrator>ping ilmserver
Pinging ilmserver [192.168.12.110] with 32 bytes of data:
Reply from 192.168.12.110: bytes=32 time=1ms TTL=64
Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.12.110:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
That works fine.
Telnet from Windows:
C:\Documents and Settings\Administrator>telnet 192.168.12.110 1521
Connecting To 192.168.12.110...Could not open connection to the host, on port 1521: Connect failed
This result is the same for either just having port 1521 open, or turning the Linux firewall off altogether. Also same when using IP address.
Just to be complete, here are the results from the Linux box.
*[oracle@ilmserver informatica]$ ping WS2003Ora10g*
PING WS2003Ora10g (192.168.12.10) 56(84) bytes of data.
64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=1 ttl=128 time=1.63 ms
64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=2 ttl=128 time=0.222 ms
64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=3 ttl=128 time=0.255 ms
64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=4 ttl=128 time=0.258 ms
--- WS2003Ora10g ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.222/0.593/1.639/0.604 ms
*[oracle@ilmserver ~]$ telnet WS2003Ora10g 1521*
Trying 192.168.12.10...
Connected to WS2003Ora10g (192.168.12.10).
Escape character is '^]'.
... works for all users.
Checking out the port situation on Linux:
[informatica@ilmserver ~]$ netstat -an | grep 1521
tcp 0 0 127.0.0.1:1521 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:1521 127.0.0.1:43782 ESTABLISHED
tcp 0 0 127.0.0.1:1521 127.0.0.1:44290 ESTABLISHED
tcp 0 0 127.0.0.1:58289 127.0.0.1:1521 TIME_WAIT
tcp 0 0 127.0.0.1:58287 127.0.0.1:1521 TIME_WAIT
tcp 0 0 127.0.0.1:1521 127.0.0.1:43792 ESTABLISHED
tcp 0 0 127.0.0.1:54116 127.0.0.1:1521 ESTABLISHED
tcp 0 0 127.0.0.1:1521 127.0.0.1:44283 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:54123 ::ffff:127.0.0.1:1521 ESTABLISHED
tcp 0 0 ::ffff:127.0.0.1:30135 ::ffff:127.0.0.1:1521 ESTABLISHED
unix 2 [ ACC ] STREAM LISTENING 129262 /var/tmp/.oracle/sEXTPROC1521
[ the sequence of dots means I took out a whole lot or lines with virtually the same information, only different port(s) ]
What’s noticeable is that port 1521 seems solely assigned to the localhost IP-address, 127.0.0.1.
Another thing I noticed is that from a different user in Linux, so not “oracle”, using SQL Developer I cannot access the local Oracle database via TNS. When choosing TNS the dropdown box for “Network Alias” – which normally is populated with entries from TNSNAMES.ORA – is completely empty. On a “users and groups” level I basically assigned all the groups the oracle user is member of, to the other user (called informatica).
And to make it even more interesting, at first it worked using “Basic” (in SQL Developer), but since implementing the TNS_ADMIN environment variable, it doesn’t work at all !!!
Trying it via SQLPLUS as the “informatica” doesn’t work either:
[informatica@ilmserver ~]$ sqlplus system
bash: sqlplus: command not found
I’ve assigned the “dba” group to “informatica”, or rather, I have assigned all groups to the “informatica” user as the “oracle” user has.
Needless to say I am no Linux expert, rather a quite inexperienced Linux-user.
So bottom line, the situation I’d like to be able to create is the following:
• Linux Oracle DB accessible from “informatica” (or any other) user on Linux, via both TNS and java-based
• Linux Oracle DB accessible from remote machine (running Windows 2003 server) via both TNS and java-based
• And for Informatica to work properly, it says it needs the TNS_ADMIN environment variable, so the “informatica” user must have full Oracle connectivity with TNS_ADMIN in place.
Any help is greatly appreciated.
Thanks, PatrickHi Billy,
Thanks for your elaborate answer.
Not sure whether I can use it though, since the application using the oracle database (i.e. Informatica ILM 5.3.2) appears to have a specific need for TNS.
I thought I had a solution (not the prettiest for sure) by just copying TNSNAMES.ORA to an accessible location, change ownership to "informatica" user, have TNS_ADMIN point to it, and Bob should be my uncle. Well... he isn't!
In SQL Developer when I choose TNS as connection type, the drop down box is STILL empty.....aaaaahhhh!!!!!
I was advised to play around with primary groups, so I tried oinstall and dba as primary groups for informatica user, all to no avail.
And I can't even test it with SQLPLUS because I don't have access to it as "informatica".
Who knows what the exact reason for that is... I know I'm a far cry from an experienced linux user, but I assumed that having the Oracle Home bin directory in PATH, and assigning the oinstall group to informatica user, would ensure access to to any executable in there. Well... NOT!!!
+[informatica@ilmserver ~]$ sqlplus system@orcl+
bash: sqlplus: command not found
This is driving me nuts. Thought that finding a solution for this wouldn't be this hard, but essentially I've been digging for 3 days now.
To provide more background, here are the env.variables:
[informatica@ilmserver ~]$ env
SSH_AGENT_PID=21054
HOSTNAME=ilmserver
DESKTOP_STARTUP_ID=
TERM=xterm
SHELL=/bin/bash
HISTSIZE=1000
GTK_RC_FILES=/etc/gtk/gtkrc:/home/informatica/.gtkrc-1.2-gnome2
WINDOWID=262nnnnn
USER=informatica
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=orcl
GNOME_KEYRING_SOCKET=/tmp/keyring-LXptz1/socket
ORACLE_HOSTNAME=ilmserver
ORACLE_BASE=/home/oracle/app/oracle
SSH_AUTH_SOCK=/tmp/ssh-CFDat21018/agent.21018
SESSION_MANAGER=local/ilmserver:/tmp/.ICE-unix/21018
USERNAME=informatica
TNS_ADMIN=/var/temp
MAIL=/var/spool/mail/informatica
PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/informatica/bin:/usr/java/jdk1.7.0/bin:/usr/sbin:/sbin:/home/oracle/app/oracle/product/11.2.0/dbhome_1/bin
DESKTOP_SESSION=default
GDM_XSERVER_LOCATION=local
INPUTRC=/etc/inputrc
PWD=/home/informatica
JAVA_HOME=/usr/java/jdk1.7.0
XMODIFIERS=@im=none
LANG=en_US.UTF-8
GDMSESSION=default
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=2
HOME=/home/informatica
GNOME_DESKTOP_SESSION_ID=Default
LOGNAME=informatica
CVS_RSH=ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-axxxxxxxxo,guid=xxxxxxxxxxxxxxxxxxxxxxx
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/tmp/.gdmKEYS0V
Thanks, Patrick -
In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Create the 2nd Standby database on Linux from 1st standby database on wind
Hi Experts
I want to create the 2nd Standby database on Linux from 1st standby database on window.....
my 2nd standby database is on mount state, when i try to recover by the given command then its giving errror.
rman > DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER NOFILENAMECHECK;
My question is am I able to created it on cross platform....thanks a lot for your time and help Mahir!!!
i tried through goldengate but i didn't able due to clob, long datatype....
check the below link where i ask the question.....
initial load failed to transfer the clob data -
Planning to move my datafile from windows server 2003 to windows XP
planning to move my datafiles from windows server 2003 to windows XP
database 10g
Is it possible to follow below the steps for above migration
=====================================-
This is my steps( migrated from windows Xp to windows XP)
Moving oracle Datafile from one server A to B (instance not running) (cold backup)
In server a (cold backup of datafile)
SQL> alter database backup controlfile to trace
Go to udump check the trace file copy these lines
CREATE CONTROLFILE REUSE DATABASE "O10G1" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 454
LOGFILE
GROUP 1 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO01.LOG' SIZE 10M,
GROUP 2 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO02.LOG' SIZE 10M,
GROUP 3 'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSTEM01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\UNDOTBS01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\SYSAUX01.DBF',
'E:\ORACLE2\PRODUCT\10.1.0\ORADATA\O10G1\USERS01.DBF'
CHARACTER SET WE8MSWIN1252
Change the new database name jee and REUSE replaced by SET and NORESTLOGS replaced by RESTLOGS above lines.
Save as C1.sql
Stop the oracle instance service in source ( server A)
Copy all the datafile and redlog file put into server B( any folder)
Copy the init.ora file from source and edit
Change the db_name and location of the controlfile
SERVER B
Create the oracle instance using ORADIM
Start the service
C:\ set oracle_sid=instance name
C:\>set oracle_sid=jeeno1
C:\>sqlplus /nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Apr
11 06:44:28 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount
pfile='C:\oracle\product\10.1.0\admin\jeeno\pfile\jeenoinit.ora'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> CREATE CONTROLFILE set DATABASE "jeeno1"
RESETLOGS NOARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 454
7 LOGFILE
8 GROUP 1
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO01.LOG'
SIZE 10M,
9 GROUP 2
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO02.LOG'
SIZE 10M,
10 GROUP 3
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\REDO03.LOG'
SIZE 10M
11 -- STANDBY LOGFILE
12 DATAFILE
13
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSTEM01.DBF',
14
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\UNDOTBS01.DBF',
15
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\SYSAUX01.DBF',
16
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\jeeno\USERS01.DBF'
17 CHARACTER SET WE8MSWIN1252
18 ;
Control file created.
SQL> alter database open resetlogs;
Database alteredone more thing u can also rename ur database by using nid utility ,So u have no need to recreate the controlfile for changing the name of ur database.just restore all files from primary to new server ,create new service by oradim ,start the instance and then use NID utility.
Thanks
Kuljeet -
Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen -
How to import whole database (with data) from remote server?
I am using oracle sql developer 2.1. Our main database server is in USA, we use this from Bangladesh. We also a local copy here time to time updataed.
Is there any way copy or migrate the whole database with data from usa server to our local serve using sql developer 2.1?
we use windows server 2003 service pack 2 in local server.I replied to you in Import Data wizard not found and stand by my suggestions.
Regards,
K. -
I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck -
Who has deleted data from Windows Server
Hi supporters,
Somebody has deleted some files from windows server's physical drive from windows XP user machine. This allegation has been made by IT team to a very sincere employee of the company who is working from last 15 years with the firm. So, can you please help
me to know that how we can find the right & legal way to know who has deleted the data actually because there are personal clash between IT team and accused person (who is very much trustworthy).
Thus, please help me immediately and confirm me (on following mobile number) that if you could arrange an IT professional to sort out this issue as soon as possible.
Thank you,
With best regards,
Mukesh Kapoor (09810030276)This one may help.
Apply or Modify Auditing Policy Settings for a Local File or Folder
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory
We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna -
Windows 8 and IE10 and 11 not accepting Proxy Settings via Group Policy from windows server 2003
Hi
We are still running Windows Server 2003 with a Win7 and Win8 desktop environment. I can control Win7 IE9 settings,
But Win8 systems are running IE10. We have an internal proxy server.
Is there any way to force the proxy settings to the Win8/IE10 or 11 systems .
i have tried with The IE 10 .adm template and applied gpo,but does not have any proxy settings for ie10 and no changes were applies
please can anyone help me regarding this
i want to apply GPO from windows server 2003 to windows 8 ie10/11
Thanks
KNCHi,
I agree with Zanderol24, we can install RSAT on a windows8 client, and then we can use Group Policy Management to manage group policy from the client.
For more information about RSAT, we can refer to the following link:
Remote Server Administration Tools (RSAT) for Windows Client and Windows Server (dsforum2wiki)
http://social.technet.microsoft.com/wiki/contents/articles/2202.remote-server-administration-tools-rsat-for-windows-client-and-windows-server-dsforum2wiki.aspx
For more detailed information about how to use GPP to configure the proxy setting for ie10 and ie11, we can refer to the following link:
How to configure Group Policy Preference settings for Internet Explorer 11 in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/2898604
When we use GPPs you need to be aware of the F5-F8 keys:
Red / Green: GP Preferences doesn’t work even though the policy applied and after gpupdate \force
http://blogs.technet.com/b/grouppolicy/archive/2008/10/13/red-green-gp-preferences-doesn-t-work-even-though-the-policy-applied-and-after-gpupdate-force.aspx
Besides, aside from using group policy to manage IE, IEAK can also be used to do this.
For IEAK, the following article can be referred to for more information.
Internet Explorer Administration Kit (IEAK) Information and Downloads
http://technet.microsoft.com/en-in/ie/bb219517.aspx
Best Regards,
Erin -
Upload of pdf file from windows server in to DMS content server
dear all,
kindly help me out in uploading the pdf file in DMS content server from windows server. let me know the steps how to complete this task. its a little bit urgent.
thanks in Anticipation
vikram & kiranWelcome to SDN
you can use FM BDS_BUSINESSDOCUMENT_CREATEF to do this
check this thread
Re: convert file details
or this code sample
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
Regards
Raja -
Files Transfer from Windows Server 2008 R2 on Mac
Hi,
How can I transfer files from "Windows Server 2008 R2" on Mac? as now I am using 2 App (Microsoft Remote Desktop & Fast Remote Desktop) which allowed me everything but not transfer files on Mac, so any other recommendation or salutation?
ThanksHi,
You need to configure folder redirection.
Folder redirection enables access local folders during the remote session. Click the + button at the bottom of the dialog and choose a folder you want to have
redirected.
Configure Folder Redirection:
1. Click the + button.
2. In the Add Local Folder window, enter the following information:
l
Name: Set a name for the folder to be available during the remote session.
l
Path: Select the path to the folder to be available during the remote session.
3. Click the close button to save the remote desktop.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Hope this helps.
Jeremy Wu
TechNet Community Support
Maybe you are looking for
-
Using MacBook Pro and Mac Mini
I've decided to add a Mac Mini to my house, rather than constantly running my MBP on power with a 2.5TB USB connected, serving my 3 Apple TVs. The idea will be to run the Mac Mini headless, running iTunes, with my USB drive connected, always availabl
-
I'm using the latest iTunes on Windows 8. Since upgrading to iTunes 12 my old system of smart playlists within folders have not worked properly. I used to have a folder containing three folders with smart playlists in them, but I had to abandon this
-
Asset Posting date different in Book depreciation and IFRS depreciation.
Hi SAP gurus, i have a problem in Asset Accounting. The posting date of the asset is taken as 05.05.2008 in Book depreciation and it is taken as 28.02.2008 in IFRS books.. How do I change the posting date to 05.05.2008 from 28.02.2008 in IFRS books.
-
when i connect my usb to my n96 it keeps trying to look for a wlan connection or tmobile internet. why does it keep doing this? it was working fine up until a week ago please help as i need to transfer photos and videos
-
I cannot get Safari to save my bookmarks. I can drag and drop a URL onto the bookmark bar, but I cannot use the menu item ("add bookmark"). I go through the motions and I think Safari is adding the bookmark, but it is not actually being saved. Can so