Role not displayed in tree

Hi
I have a case where, in an org unit, roles are assigned to users and depending on the role, a user is allowed to perform certain activities on the system. The dir tree is shown below. This is a case where activities allowed for a role can change depending on the OU the user is operating on.
org unit
|
|-- user (role via nsroledn)
|
|-- role (managed role)
|
|-- activity (my custom objectclass)
So I have created Managed roles and assigned them to users using the nsRoledn attrib. The activity is created using my custom OC. I have not yet looked at CoS. This is working fine. All the entries are added through JNDI based code.
I have one problem. When I try to look at the activity entry from the console, I am unable to do so. i.e. the role entry appears only on the right pane in the console although it has some leaf activities. When I add an activity to the role from the the console, then the role also appears in the left pane and I can see the leaf activity in the right pane. Any ideas why this is so??
Also is it ok to add activity leaves to the role entry as I'm doing??
Finally, can I use CoS (class of service) for this purpose? If so can somebody provide basic startup steps!!
regards
Sikka

vinay sikka wrote:
Hi
I have a case where, in an org unit, roles are assigned to users and
depending on the role, a user is allowed to perform certain activities
on the system. The dir tree is shown below. This is a case where
activities allowed for a role can change depending on the OU the user
is operating on.
org unit
|
|-- user (role via nsroledn)
|
|-- role (managed role)
|
|-- activity (my custom objectclass)
So I have created Managed roles and assigned them to users using the
nsRoledn attrib. The activity is created using my custom OC. I have
not yet looked at CoS. This is working fine. All the entries are added
through JNDI based code.
I have one problem. When I try to look at the activity entry from the
console, I am unable to do so. i.e. the role entry appears only on the
right pane in the console although it has some leaf activities. When I
add an activity to the role from the the console, then the role also
appears in the left pane and I can see the leaf activity in the right
pane. Any ideas why this is so??I'm not sure. Is the activity entry a child of the role entry? You should not do this. I'm not sure what you are trying to do
here. Why can't the activity entry be a direct child of the org unit entry? Or some other container entry?
Role entries (and cos definition entries too) should not be used as containers or parents of other entries. Roles and CoS use a
special objectclass called ldapSubEntry - this in effect makes the entry an "operational" entry - a special entry which does not
show up in regular ldap searches. The console knows how to find role and cos definition entries, but not their children.
>
>
Also is it ok to add activity leaves to the role entry as I'm doing??
Finally, can I use CoS (class of service) for this purpose? If so can
somebody provide basic startup steps!!
regards
Sikka
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Similar Messages

ContextMenu Not Displayed in Tree Which is added in popup.

I have created popup. and added tree in it. Tree has a userdefined contextMenu.But when i right click on item in tree the contextMenu is not displayed.

Hello,
As per ADOBE docs, context menu works for top level components and not with the child components.
Thats why u r not getting context menu in the tree, as its now the child of title window.
please checkout this link,
http://stackoverflow.com/questions/5382159/flex-custom-context-menu-for-a-component
Thanks and Regards,
Kanchan Ladwani | [email protected] | www.infocepts.com

Roles not displayed in BEx Analyzer for NW2004s

We are evaluating a technical upgrade only from BW 3.5 to Netweaver2004s. Under this plan, the 3.5 security will not be migrated to 7.0. We are using SAPGui Frontend 6.40 for BI. The existing BW 3.5 roles are not display in the Role Menu of SAP NetWeaver BEx.
Any ideas on this?
Isbell

Got the following response from SAP and this resolved the issue
please add the parameter
DELETE_DOUBLE_TCODES with PATH = 'NO'
into the table: ssm_cust (via tx: se16)
The settings in SSM_CUST defines a compress mechanism for the user menu
known as "Redundancy avoidance" and described in notes 357877 and 357693
Redundancy avoidance deletes easy access menu entries for doubled
transaction codes whenever SSM_CUST contains
1. an entry CONDENSE_MENU with PATH = 'YES' and
2. either an entry DELETE_DOUBLE_TCODE with PATH = 'YES' or no entry
DELETE_DOUBLE_TCODES, at all.
If you don't want doubled transaction codes to be deleted, then simply
add an entry DELETE_DOUBLE_TCODES with PATH = 'NO' into table SSM_CUST.
Suresh

Role not displayed in Production system

Dear all,
I have CUA set up (CUA is configured in solution manager), and I assigned 10 roles to a user in solution manager using SU01 and selected Production system while assigning roles and the roles were already existing in production system.but after role assignment to the user, I verified in Production system and I found that they are not reflecting in PROD. Infact, I have done user comparision but still no change.
Please let me know do I need execute SCUL by selecting the User ID.
If yes please let me know the steps to execute SCUL.
Your help is much appreciated!
Many thanks
Anil.

Hi,
Please go to the Transaction SCUL, and give the user id and the system as the prodution system ID (eg. PRD100). By default the Error, Warnings and Unconfirmed Distribution will be already checked. Do not change them and then click on Execute.
If you receive the message saying No Data, then it means that the IDOCs for that user were successfully pushed from CUA to the production system.
But, since the change was not reflected, when you execute, you will be able to see the status where the IDOC is struck. Expand the tree and see the nature of the error, and try to resolve that error. And then select the entire tree and click on the Distribute button.
It will give you a pop up, let all the checkboxes as it is, and continue. After the distribution is triggered, you will get a message in SCUL.
Refresh the SCUL data, and you should be able to see the current status of the distribution.
If all the data is cleared in SCUL, you can log into your produciton system adn check the users roles. New role should be visible there.
I hope this will clear your doubt. Let me know if you have any questions on this.
Regards,
Sneha Vyas.

SQL Developer 1.1 Query Builder does not display connection tree

I have installed SQL Developer 1.1 on a PC running Windows XP SP2. I am connecting to Oracle 9.2.0.7.0.
After connecting to the database, I right click in the SQL Worksheet and select Query Builder and when the new window is displayed, there are no tables to select from.
What is causing this?

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

Help with displaying a tree...

Hello,
I created a window program that displays some data in a tree structure. I have two versions of the program. One that works and one that doesn't. The one that does, builds the tree in the constructor method of my window class, creates a scrollPane for it, and adds the scrollPane to the window. Again, this version displays the tree fine.
The second version, what I want to accomplish is load the tree when a button is pressed. When the button is pressed, I execute exactly the same steps that I do in the constructor but now these steps are in the actionPerformed method associated to the button. The thing is that the program does not display the tree. I have tried the repaint methods at the contentPane level, at the tree level, reloading the treeModel, but cannot get the tree to show. I would very appreciate any ideas on this...
Thanks
Antonio

Hey...
Thanks for the tip...that did the trick. What does the validate() method do exactly? The documentation doesn't say much....Thanks again...
Antonio

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

In Portal Content admin Role "Portal content" folder is not displaying

Hi,
I created a user in EP and assign Only Content admin Role. But in portal content area "Portal content "folder is not displaying.
Can someone help me the process steps to achieve it?
Thanks,
kundan

It is because the user has no proper permissions to the porta content folder.
you should give atleast read permission to the portal content folder to the content_admin role or to the users who have content admin role.
also make sure the end user check box is checked at the time of giving permissions.
Otherwise give eevryone group as read permisisons to the portal content folder. then you can see the portal content folder with read permissiosn only.
Raghu
Edited by: Raghavendranath Garlapati on Sep 1, 2009 9:32 AM

The left navigation pane (index tree) is not displaying in last Google Chrome version (Version 28.0

I'm publishing my RoboHelp 9 projects in IIS (Windows Server) and the index tree is gone if I open them in Chrome version 28.0.1500.72 m
If I apply the fix (WebHelp TOC does not display using Google's Chrome Browser) suggested here http://www.grainge.org/pages/snippets/snippets.htm#browsers
it looks like it fixes the problem for European languages but it breaks the search functionality for Asian languages.
Any idea?
Thank you

The fix does say it is only for Rh7.
Could it be like Item 6 at http://www.grainge.org/pages/snippets/snippets.htm#webhelp. You haven't said if the problem is only with Chrome.
Try publishing from the sample projects. That will identify whether it is a general or project issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

DME format tree - after test run, not displaying file.

Hi experts,
After creating DME format tree , I ran Test run for that. At that time for some format trees, it is displaying the file.
But for some of the format trees , while running test run , the file is not displaying.
Can any one help me out in this problem?
ur answers will be surely rewarded
regards,
uma

Hi experts,
After creating DME format tree , I ran Test run for that. At that time for some format trees, it is displaying the file.
But for some of the format trees , while running test run , the file is not displaying.
Can any one help me out in this problem?
ur answers will be surely rewarded
regards,
uma

Query on SQL Developer Connections Tree Does Not Display Objects

Hi Gurus, Could you please clarify on the below. As per the note ID 1458753.1, SQL Developer Connections Tree Does Not Display Objects to user in order to access database objects outside the owned schema/account. ------------------------- By default, and without granting wide privileges such as DBA, a user will only see his or her own objects in the first level object nodes under their connection. Objects in other schemas must be accessed via the Other Users node under the connection. This is the intended functionality/display in SQL Developer. ------------------------- Is there any other way we can achieve this? Requirement is very common - user A owns all objects and user B granted read/read-write privileges on user A objects. Now user B wants to Display user A objects in the corresponding objects node of SQL developer. Could any one shed some light here? Thanks Venu

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

Tree with multiple root nodes does not display

I am trying to create a tree to display some hierarchical data which contains several root nodes.
I have specifed that the TREE_ROOT value is always Null as the root nodes have a null value for the PARENT_ID. The page displays yet none of the data is displayed.
I have manage to get it to work by creating a dummy single root that I reference from the existing root values?

Phattam,
The TREE_ROOT identifies the root node's ID, not its PARENT_ID.
For example, if we build a tree on the oehr_employees table, the ID is EMPLOYEE_ID and the PARENT_ID is MANAGER_ID. therefore, to identify the start of the tree, we could populate the TREE_ROOT with a select statement e.g.
SELECT employee_id FROM oehr_employees WHERE employee_id = 100This identifies a single value and the tree starts from employee_id 100.
If we used a select statement that retrieves more than one row, e.g.
SELECT employee_id FROM oehr_employees WHERE manager_id = 100then the tree starts at one of the children of employee_id 100 - ApEx will not show a tree that has more than one starting node. If you want to show these alternative starting points, you'll need to do exactly what you have done - create a 'dummy' root node.
Hope this helps,
Bryan.

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Can not display Connection dialog.

Hi There,
Verry strange what happen.
My Sqldeveloper stop working for an unknown raison.
I could not see my connections, got stranger error When I try to create an Sql Sheet
java.lang.NullPointerException
     at oracle.dbtools.raptor.controls.ConnectionPanelUI.listConnections(ConnectionPanelUI.java:426)
     at oracle.dbtools.raptor.controls.ConnectionPanelUI.resetConnections(ConnectionPanelUI.java:440)
     at oracle.dbtools.raptor.controls.ConnectionPanelUI.<init>(ConnectionPanelUI.java:120)
     at oracle.dbtools.raptor.controls.ConnectionPanelUI.<init>(ConnectionPanelUI.java:101)
     at oracle.dbtools.raptor.controls.ConnectionSelectorUI.<init>(ConnectionSelectorUI.java:36)
     at oracle.dbtools.raptor.controls.ConnectionSelectorUI.getConnection(ConnectionSelectorUI.java:59)
     at oracle.dbtools.raptor.controls.ConnectionSelectorUI.getConnection(ConnectionSelectorUI.java:42)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorWizard.invoke(SqlEditorWizard.java:108)
     at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:317)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorAddin$2.actionPerformed(SqlEditorAddin.java:248)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I have try to downlod the latest version but I am getting the same error.
When I try to see parameters in the preference dialog, the righ pane of the preference screen it not changing when I select other options.
I am a litle bit lost...
This is installed on Windows Server 2008 R2. What is strange is that the problem occurs only with the administrator user and not with an other user who is also member of the administrators group.
Many thank for your help
Jko
Edited by: JkoFr on 4 avr. 2010 06:24

When I click on View > Connections, Raptor does not do anything.
My coworker system has Windows 2000 and the same version of java. Beside that, there are so many other variables. I am not sure what to look for. Could you please give me more information on what to look for?
When I open Raptor, it does not display Connection Tab by default.
When I run Raptor from C:\Program Files\raptor\jdev\bin\raptor.exe, I get this output. Does it look normal?
AWT Tree Lock Assert enabled
java.lang.NullPointerException
at oracle.ideimpl.docking.DockStationImpl.stateChanged(DockStationImpl.j
ava:1854)
at oracle.ideimpl.docking.DockStationImpl.initialize(DockStationImpl.jav
a:258)
at oracle.ide.IdeCore.initializeModules(IdeCore.java:1417)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1198)
at oracle.ide.Ide.startup(Ide.java:672)
at oracle.ideimpl.Main.start(Main.java:49)
at oracle.ideimpl.Main.main(Main.java:25)
Assert: Unknown Node:8: item type="PROCEDURE" reloadparent="true">
<title>Rename</title>
<prompt><label>New_Procedure_Name</label></prompt>
<sql><![CDATA[rename "#OBJECT_NAME#" to #0#]]></sql>
<help>Renames the selected procedure.</help>
<confirmation>
<title>Confirmation</title>
<prompt>Procedure "#OBJECT_NAME#" has been renamed to #0#</prompt>
</confirmation>
</item
Initializing.. [email protected]
Assert: SQLView inited
Thank for all your help.

The portlet name is not displayed in the portlet drop down list ?

Hi,
I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
I am not sure if I successfully deploy the portlet?
pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
The message I got after execute the pdeploy command is =>
Deploys the portlet war file and inserts the provider into display profile..
OPTIONS
--help Help message (false)
-u --runasdn UID Bind DN (none)
-w --password Password (none)
-p --wc_password Password for WebContainer's Admin (none)
-i --instance WebContainer's Instance into which the war file is to be deploye
d (*)
-d --dn LDAP DN of the target node (*)
-g --global Global display profile (false)
-r --rolesfile File containing the DSAME and portlet role mapping (*)
-f --userinfofile File containing the user info mapping (*)
-v --verbose Generate debug messages (false)
-V --version Generate version information (false)
-l --locale Locale information (en_US)
OPERAND
Specifies a path to the war location.
Deploying to IWS
Is this mean that successfully deploy the portlet ?
After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
the portlet name is not displayed in the portlet list.
How can I make the portlet name displayed in the portlet drop down list ?
Can someone help me ?
Thanks!

Hi
According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, there is detail about listbox control in asp.net. You can review the following links:
How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
How to get multiple selected value in ListBox control - ASP.NET using C#:
http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
Thanks
Lydia Zhang

Role not displayed in tree

Similar Messages

Maybe you are looking for