? rotating numbers next to wifi symbol

Instead of seeing PPPoe next to my wifi symbol at top of my page I am getting a set of numbers that keep rotating.  Is someone accessing my computer.  What does it mean should I be worried and what do I do?

Well normally you use the router as a connection point to your ISP, whether that is cable or DSL. Most of the time all PPPoE connections are DSL and the router should handle all of that. Then all your wired or wireless devices connect to the router and get a Private IP address assigned by the DHCP server in the router.
Unless you are mistaking PPPoE for the SSID name of you WiFi network.
As to those numbers it looks like part of a MAC (Media Access Control) address. Except for the hyphens.
I've looked around my WiFi settings and don't see anywhere to enable those numbers in the Menu Bar.
Look at you IP address, does it start with 192 or 172 or 10? If it doesn't then you are getting a Public (Internet) IP address assigned to your computer. That isn't good as you are part of the internet instead of being on a Private LAN.
In that case you are using PPPoE on the computer to login to your ISP network. This should be changed ASAP.

Similar Messages

  • Negative numbers that replace the wifi symbol when I try to use my work or home wifi

    I have noticed that when I try to use the Wifi to send recieve data on my iphone 4, the wifi symbol is replaced by a negative number (eg: -55).  The number will fluctuate up and down.  I am brand new to the iphone (smartphones in gereral actually) and my concern is that my data usage over the 8 days I have had the phone has been astronomical.  90% of the data usage i have been doing as been over what i thought was my wifi network so i should not have been useing anywhere near the data as I have been.
    Could this be causing my connection to automatically switch from my wifi to the network?  Other iphone users i have shown this to have never seen this before.
    Any help would be greatly appreciated, I'm scared now to do anything data related on my phone for fear of the insane amount of data i seem to have used.
    Thanks

    You can verify that the phone is new by checking the warranty on this page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    You have 2 problems. The first is the field test display. You should be able to resove this by rebooting the phone - hold the HOME and POWER buttons at the same time until an Apple log appears, ignoring the "slide..." message. Takes about 10 seconds of holding.
    When the phone is asleep WiFi is turned off, so if you have any background processes running that use data they will use cellular data. If you cannot maintain a WiFi connection when the phone is awake first try rebooting your router. If that doesn't fix it go to the manufacturer's web site and update the router to the latest firmware version. If it happens with all WiFi networks, not just your home network, go to the Settings app - General/Reset - Reset Network Settings.
    If you still have a WiFi problem after this take the phone to an Apple store and they will either fix it ore replace it.

  • I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    SMS. Deggie, had them check that.  After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID.  Not impressed. I put what I've learned here in a simliar thread
    https://discussions.apple.com/message/17416082#17416082
    and this is what I've put in apple.com/feedback
    "iMessage requires internet.  SMS does not.  iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime  server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
    This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

  • Pearl 9105 - WIFI Symbol greyed out

    Hello forums,
    I have an issue with my Pearl. The WiFi symbol has stayed greyed out even though it says it has connected to my WiFi, home network. It is similar to what happened during the outage that happened.
    I have reinstalled the software (OS 5) O2 won't allow upgrade to OS6. I have deleted the WiFi connection and re installed, but still it won't go white and it is affecting my mobile data usage as my phone is using the network signal for internet rather than WiFi.
    Any suggestions on how to solve?
    Cheers
    Martyn

    MadMartII wrote:
    Unfortunately the KB was very useful as I already knew that exsisted. Though it does tell me that my phone has not connected up to the Blackberry Infrastructure but don't know how to get the phone to reconnect?
    Wait...so in Manage Connections > Services Status, the status of BIS is "Not Connected"? If so, then you have bigger issues...in which case I suggest (with your BB truly functioning on your carrier network...turn the WiFi radio off to be sure) the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    See if that get's the BIS Services Status to at least say "Mobile Network". If it does, then try WiFi again (a Service Book may have been missing, and the resend may have obtained it). Otherwise, if you can't register and/or can't receive Service Books, then contact O2 for formal support as your BB is not properly connecting to them.
    MadMartII wrote:
    I have downloaded a version of OS6 but am concerned about branding will downloading it from another carrier cause any issues? 
    The ONLY thing that happens is if, at some point when you seek formal support from O2, they discover that you are using an OS level that they do not sanction, then they can refuse to provide support to you until you fall back to their supported version. But thousands of folks (maybe millions???) are using OS packages from other carriers all the time with no ill effects whatsoever.
    There is a "trick" necessary to use another carriers OS package...let us know if you desire to proceed down that path and we can provide what you need.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wifi symbol won't show?

    I have a 32 Gb 3G+wifi and for some reason my wifi symbol will not show up. I can still connect to it though and my 3G I made sure was turned off so it still works but the symbol won't show up. Right now in the top left it says "iPad" with no symbol next to it. Any suggestions? Thx in advance

    thirsty31 wrote:
    I have a 32 Gb 3G+wifi and for some reason my wifi symbol will not show up. I can still connect to it though and my 3G I made sure was turned off so it still works but the symbol won't show up. Right now in the top left it says "iPad" with no symbol next to it. Any suggestions? Thx in advance
    Quickest thing to try is restarting the iPad. Hold the Sleep/Wake button until the 'slide to off' appears and slide it off. Then restart.
    If that doesn't work you can try a full reset. Hold the Sleep/Wake button and the Home button until the Apple logo appears. Let it reboot.
    You could also try resetting the network. Settings->General->Reset->Reset Network Settings.

  • WHAT IS LOCK SYMBOL NEXT TO BATTERY SYMBOL. LOCK HAS A CIRCULAR ARROW AROUND IT

    can not seem to find out what the lock symbol with circle around it next to battery symbol is ...... any one know what it is and how to turn it off ?
    never mind .... found the answer in another discussion post.. its a setting for locking out the rotation feature. problem solved.
    this support community rocks !!!!

    This is covered in the manual:
    iPod touch User Guide (For iOS 4.3 Software)

  • IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

    I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
    I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
    I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
    So this is my problem for people who don't want to read the whole message:
    1. I can't connect to the internet with the iPad
    2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
    3. It's not the router problem.
    4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
    5. Do any of you know what this problem is? Or do you have a solution?
    Thank you for reading this and have a great day

    Since you are in a hotel, some of these are not applicable.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Macbook pro wifi symbol greyed out and will not recognize networks

    My Macbook Pro has had an issue since this past fall of having its wifi symbol greyed out with an "X". It also does not recognize wifi networks as in simply no networks show up. Talked to Apple last week and they said to upgrade to Yosemite, but I am still having this issue. Help?

    Have you used DVDs that have different region codes?  It may be that your DVD drive is locked for a region code different from what Netflix is programmed for.
    Ciao.

  • Why do I have a E showing where my wifi symbol should be.

    why do I have an E showing where my wifi symbol should be on my iphone.

    Because your iPhone is not connected to a wi-fi network or the wi-fi symbol would be shown.
    "E" means your iPhone is connected to your carrier's EDGE network for internet access.

  • How do you print the numbers next to the first column

    In Numbers I can't figure out how to print the numbers next to the first column to the left. Say I have 350 people on a list and I want to print the sheet with the numbers next to the people's name, how do I do that. Excel automatically does it. However, I cannot find the option to print and include the numbers from the standard Numbers worksheet. Thanks for your assistance.

    In excel it is actually in the page setup dialog. under the "sheet" tab. Numbers doesn't have one table per page (excel is basically one large table of cells). So printing header and column labels doesn't really work in numbers, because those labels don't show up until you click inside the tables. If you notice when you do that they abstruct the view of everything else that might be near the edge of the table.
    The other posters response is the best way to do it. you can get column Numbers (but not letters) by using the column command in an extra row at top also. Thre is a way if you really want column letters, but it ain't pretty. Let us know if you want that too.
    Jason

  • Numbers next to Apple TV

    How do I get the numbers next to my Apple TV when using airplay?  Also, I don't know if this is related but when I go to use the Apple TV remote, it has multiple TV options under the same name.  How do I get it to display just one Apple TV?

    I Have the same issue. Help please made me think some one was on my network so much that I reset my network with new static I.P.

  • Hi I am having trouble with wifi my OSX version is 10.8.4 and I can't connect iv put the password in and it' keeps coming up with a exclamation mark in wifi symbol I can't get my computer to delete the network or forget it??

    Hi I have a mac book pro OSX 10.8.4 iv connected to a wifi point where I am staying and iv selected network and put in password and over the wifi symbol a exclamation mark appears the wifi works perfectly on my iPhone but won't with my MacBook iv turned it off and on iv tried to forget/delete the network but it won't let me? Is there anything I can do I really need it cause I'm travelling and need to book things. Thanks

    Information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • What does the wifi symbol on the bottom left of photos in iphoto signify?

    What does the wifi symbol on the bottom left of photos in iPhoto signify?  I believe that whatever this signifies is preventing me from syncing an album with my iPad and iPhone.

    It means the Photos are not in your Library but instead read from an online source.
    Regards
    TD

  • Why is my wifi symbol greyed out?

    Hi,
    As the title suggests - my wifi symbol is greyed out (as it used to look when no wifi was available). However - my wifi is working well (I'm on it now!).
    I've done a bit of searching, and the closest problem I can see to this is when people have an exclamation mark on their wifi symbol. However - this isn't the problem I'm having.
    Does anyone have any idea?
    Thanks.

    When I click on the symbol, all available networks are displayed. I can click on another network and connect that that fine too. Often, when I swap around wifi networks, the symbol becomes 'blacked out', as I'd expect, rather than greyed out.
    When I click on System Preferences - Network, I see a green light with connected underneath.
    Typically - yes, the symbol is greyed ouf from when I start the computer.
    I hope this helps.

  • On phone next to battery symbol there is a "closed lock with an arrowed circle around it"  does anyone know what this is and how to correct it.

    on my I phone next to battery symbol there is a "locked lock surrounded by aa circled arrow"  does any one know what this is for?

    drsoif, this is the Portrait Orientaion Lock, which means you locked your phone in a way for it not to have landscaping mode. To correct this you will need to: double tap your home button and swipe to the right, first icon will be the icon with the ''arrow'' going in a circle, tap on it once and the lock will disappear:)

Maybe you are looking for

  • Syncronizing Accounts on Separate Computers thru Network

    Hi. I have a desktop with individual accounts for our family members. And I have a notebook computer with my account. I have replicated my account on my notebook with my account on the family computer. Is there a way to automatically, or at least sea

  • WebDynpro development in GP: only WD java ?

    Hi,   I want to develope a custom webdynpro component that can be used as a callable object, may i choose Webdynpro for ABAP as the development tool? I noticed that in some tutorial that certain APIs are necessary to develop webdynpro component, does

  • Setting output file name in export transaction data package

    Hi all, I am running an "export transaction data" package in the data manager. I wanted to set the output file name so that it will be a constant value. I wrote the following in the package editor: INFO(%FILE%,\ROOT\WEBFOLDERS\COLMOBIL\VEHICLES1\DATA

  • Can someone help please....

    I'm really quite new at Java (2nd semester)...and we've been asked the following: "Write a program that prints itself to standard output. The printed version must b an exact duplicate of the original program, (in other words if the output was copied

  • (N95) Datamatrix reader

    Hello all! I have a N95 which came with a 2d code reader by default. The problem is that after reading a code, the only option avaiable is to open an URL. A 2d code can pass much more instructions to the phone, such as 'save as new contact', 'send a