Routing-LSMW-Component Allocation to task list

Hi Gurus,
I'm creating LSMW to Routing using Standard-Batch Input method, have mapped the required structures.
But I was unable to map the Component allocation to task list.
Is it possible in the standard one else I need to go for some sort customisation.
Can anybody throw some lite on this issue ?
regards
Ram Kumar

Hi,
You will find BIPMZ Batch input structure for component allocation to task list in the standard structure relations (no customizing required). Use the same for your need.
Hope it clarifies your query.
Regards,
Vivek

Similar Messages

  • DB table holding the component materials in task list

    Hi all,
    I'd like to find out the relationship of the component materials inside a task list (IA07).
    I've found DB table PLKO and PLPO holding the data for task and operations respectively. Inside an operation, there are components.  I just can't find the DB table holding the components by F1 and where-used list ...
    Any advice?
    Thanks a lot.
    Message was edited by:
            Macy Lo

    PLMZ-PLNTY = PLKO-PLNTY
    PLMZ-PLNNR = PLKO-PLNNR
    PLMZ-PLNAL = PLKO-PLNAL
    PLMZ-ZAEHL = PLKO-ZAEHL
    PLMZ-PLNTY = PLPO-PLNTY
    PLMZ-PLNNR = PLPO-PLNNR
    PLMZ-ZUONR = PLPO-PLNKN
    PLMZ-ZAEHL = PLPO-ZAEHL
    if helpful, reward
    Sathish. R

  • Mass component substitution in Task List

    Hi Gurus,
    I'have so many Task Lists, and total have hundreds of line operations.
    But, now there material substitution. Let say, previously in Taks List using Material/Component "A", and now material "A" substituted become material/compenent "B".
    How could we do change (mass change) to all Component in Task List that previously using "A" and than replaced by "B" and how about if there are unit of measure differences .
    How do we do it ? Any T-Code to do this ?
    Regards,
    Tri W

    Tri W,
       The material will be replaced, with the follow up material,  once there isnt sufficient quantity available to satisfy the demand from the reference date entered on the MRP screen.
        However, it looks like this replacement of the follow up material only works if you manually enter the orginal material in the components tab or if you import the material from a BOM.This doesnt seem to work if the material is directly associated to the Task list(Even though this is also assigned a BOM number of Type "standard") . When you import the task list into the order, the Original material is not replaced with the Follow up material if there isnt sufficient stock available.This looks like a bug to me, you may want to consider raising a OSS note to see where that leads you, otherwise my apologize for misleading you. We had used the BOM and this worked perfectly for us,hence i was pretty sure this would work for materials assigend directly to task list(Since this also had a BOM number and type assigned to it).
    Best Regards
    Narasimhan

  • Create Routing BAPI_ROUTING_CREATE Component Allocation

    Hi,
    I am creating  routings by using BAPI_ROUTING_CREATE Function Module.
    But I am unable to update Component allocation data using this BAPI.
    What all the variables do i need to pass for updating Component allocation
    Can I have any Inputs Regarding Component Allocation for this BAPI.
    Thanks in Advance
    Best Regards
    Rasheed

    Hi,
    Check
    Re: BAPI_ROUTING_CREATE and components allocation.

  • LSMW to Load - Equipment Task List/Operations/Inspection Characteristics

    Hello Experts,
      Any suggestions on standard LSMW load program for this. The Standard batch Input - 0470/IBIP program does not have the option to load Maintenance Package and Inspection characteristics.
    Any other suggestions please.
    Thanks

    Hi Ananthram,
    instead of using the standard batch input program, you could also create a new recording that performs exactly the tasks you need. Mark "Batch-input-recording" and click on Overview. From there, you can start recording your transactions.
    I hope this helps and solves your issue.
    Marc

  • LSMW-Task List

    Hi There,
    I am using LSMW to upload the Task List Long Text. I am facing two below issues:-
    1: It only allows 999 characters to upload from an excel. I want to upload more that 999 chars in long text
    2: It doesnt save my long text. It saves only when if I first upload the long text as '*' and then my actual content
    Please suggest
    Thanks & Regards,
    Sanjay

    Hello
    Please use FM SAVE_TEXT or Read_Text
    Br
    Rakesh

  • Bom for component allocation in routing

    I have created Sales order Bom. When I create normal routing and go for component allocation then system asks for Bom creation.
    Why system is not considering  sales order bom in Normal routing for component allocation?

    Hi,
    Sales order BOM will not be valid for Production. Eventhough you have created the sale BOM, the system will consider only the Production BOM. So you need to create a Production order BOM also, when you want to create a routing or production order creation.
    Regards,
    V. Suresh

  • Component allocation to Euipment Task list

    Hello frinds,
    I have a query related to Plant Maintenence.
    We have a euipment task list with different counters . In each counter we have operations and components assigned to those operations.
    When order is created some of the operations are not getting copied and hence few components as well.
    Please tell me tables where i can find the allocation of compoenents to operations.
    Thanks
    Rohit

    Thanks Mahee,
    The table i was looking for is PLMZ (allocation of components to operations)
    I found that deletion indicator is set for certain operations in PLMZ and those components are not picked which are assigned to operations with deleltion indicator (LOKEZ-PLMZ).
    Can any one tell me how this deletion indicator is set for component allocation to operations and how do i remove this ?
    Thanks for help.
    Rohit

  • Problems while uploading Task List - Service Pack with LSMW

    We are trying to upload General Maintenance Task List using LSMW. We are using Standard Batch/Direct Input method with Object 0490.
    We need to upload task list header, operations, maintenance pack, component and service pack for operations.
    We have created separate files containing data for different structures and they are linked using Group, group counter and operation number according below
    Header
    |----Operations
    .......... |----Long Text
    ..........|----Maintenance Pack
    ..........|----Components
    ..........|----Service Pack
    We have multiple operations per task list and multiple services per operation. The service pack is required only for a specific control key - PM03.  As per the configuration this screen (PROGRAM - SPLMLSP, Screen Number - 0200) is accessible only when the value PM03 is entered in the operation. We are able to upload all other details except service pack details. We have tried using structure IBIPBDCD for the same.
    While uploading the task list in foreground, when control key is entered as PM03 in an operation, service pack screen is displayed with error u201CNo batch input data for screen SAPLMLSP 0200u201D. The data provided in structure IBIPBDCD does not get processed at this time.
    On exiting the screen using back button, the data in IBIPBDCD structure is passed incorrectly to fields in screen 3400 (SAPLCPDI)
    Are we doing something incorrect? Is there a way to use this standard functionality to upload task lists with service packs?
    Thanks
    Edited by: jvalitp on Dec 15, 2011 12:46 PM

    Hi,
    When loading the tasklists you need to define a source structure as per the IBIP structure. You have different levels for example level 1 - header then below that level 2 - Operations, Header Long text then below that you have level 3 - Operation Long text, Operation Package assignments, operation component allocation.
    For each of these levels you need an identifier that links then together. In your source file specify identifier 1 for header, Identifier 1 and Identifier 2 for operations, identifier 1 identifier 2 and identifier 3 for packages. This way the system can create the correct structure when it reads the data from the text file.
    The identifiers are numeric and will dissapear once the files are loaded. specify then in the source structure as 2 characters and remember to set the xcel file up to have a 2 character field.
    For the header file each line will be a new identifier 1,2,3,etc.
    The operations are assigned to the header and have 2 identifiers. The first corresponds to the header identifier the next is a sequential number stating at 1 and incrementing for each line e.g Header 1 op 1, header 1 op 2, header 2 op 3, header 2 op 4, header 2 op 5 (this would be 2 header records. The first with 2 operations on it the second with 3 operations)
    The package is assigned to the operation and as such needs to have a third identifier. Header (identifier 1), Operation (identifier 2), Package (identifier 3) Example Header 1 op 1 pack 1, header 1 op 2 pack 2, header 2 op 3 pack 3, header 2 op 4 pack 4, header 2 op 5 pack 5
    I have a loading file for each of the items i.e. Header file, Operation file, maintenance package file. This is then assigned to the respective source structure.
    Regards,
    ravi

  • Routing component allocation

    Hi All,
    A material routing have 6 operations, 0010,0020.....0060.
    We have allocated one BOM component A to operation 0020 & another component B to operation 0040.
    Production order created for the material.
    Can anybody tell from which table/tables we can get the component allcation details for the production order?
    Regards,
    s.g

    Hi , Srijit
        Table PLMZ stored the relationship between operation and component ,but if you want get more detail ,you have to connect to table STPO .
         The relationship as below:
          Table PLMZ ,key field :
            PLNTY  Task list type
            PLNNR  Group
            PLNFL   Sequence(it may have more than 1 sequence in a routing due to alternative or parallel sequence)
           PLNKN  TL Node -  Task list node (it stand for Operation , but not simply equal to operation no,  Say in a routing ,there are 3 operations 0010 /0020/0030 ,in here ，for operation 0010 the TL node  is  1, but  if you delete it and create an new operation 0010 ,it may become to 4. pls link to table PLPO to get the operation no. )
            you can get below information :
            STLTY  BOM category
            STLNR BOM
            STLAL Alternative
            STLKN  Nodes
            WERK_STL Plant
           Connect to table STPO ,then you can get the material no and other things .
           Hope this can help you .
    Joe.Li

  • PM:Task list Component addition

    Hello Guys,
    We are facing below issue.
    1. In task list component screen, if we add a component via Direct entry, system create Standard BOM.
    2. If we add the component via component selection from BOM, it creates the material BOM.
    The second method is preferable as changes in BOM is reflected in task list as the link is maintained. This is not an issue if we are creating task list manually as we can select the component manually. But however, if we create task list via LSMW or load program, the issue arises.
    When contacted SAP on OSS, SAP advised to use BADI IMRM_COMP_PROCESSING, method SET_COMP_PROCESSING with
    E_CORRECTION_ACTIVE = ' '. This seems to resolve the issue. But I am not sure of the side effects.
    Has any one implemented this BADI earlier and can share the experience?
    Thanks
    Ashish Barsagade

    hi,
    U can assign material BOM in Tasklist header... there is a Assembly field... just enter the name of Material BOM. and Material BOM would be attatched to task list.
    it will solve ur problem
    Regards,
    Amit kushwaha
    Edited by: amit kushwaha on Feb 25, 2008 10:45 AM

  • Lsmw for general task list (IA05)

    Dear Experts,
                        I am developing lsmw for general task list (IA05). For that I have created two recordings one for header item and another for its operation respective to that group (PLNNR). I had created 2 flat file for it, one for Header Data and one for Operation. I am linking files with respect to its group (PLNNR).
                      This lsmw works for its header data perfectly but at its operation level it will not get group counter(PLNAL) for the respective group(PLNNR). I have to select group counter and click on opertaion manually, after that it fills the opertation perfectly.
                      So can anybody suggest me how to link header and operation data in lsmw.
                     Thanks in advance.
    Regards,
    Sunil.

    Hi Sunil,
    I guess you are using object type 490 to create tasklists.
    To do this create one flat file and not two flat files.
    The flat file structure has to be like this..
    TCODE Record Name  Data
    for first task list
      IA05       IBIPTLST       Header data
    for single operation
                    IBIPTLOP        Operation data
                    IBIPTEXT         Long text data
                    IBIPTMAT        component data
    for second operation
                    IBIPTLOP        Operation data
                    IBIPTEXT         Long text data
                    IBIPTMAT        component data
    for second task list
      IA05       IBIPTLST       Header data
    for second task list - 1st operation
                    IBIPTLOP        Operation data
                    IBIPTEXT         Long text data
                    IBIPTMAT        component data
    for second task list - 2nd operation
                    IBIPTLOP        Operation data
                    IBIPTEXT         Long text data
                    IBIPTMAT        component data
    Regards,
    Arun Prasath Kumar

  • Component allocation in the Routing "BAPI_ROUTING_CREATE"

    Hi,
    I am using the BAPI "BAPI_ROUTING_CREATE" to create a Routing. It works fine creating the operations, Component allocations and updating the Header data Information.
    The Problem i am facing is with the allocation of components with Phantom assembly. Can any one help me in passing the Parameters to the BAPI to allocate the components with the Phantom assembly.
    Thanks
    Shekar

    Hello Nagasekhar,
    I am not able to create operations even.
    can you please help me out.
    i create routings from the data available in file uploaded from system.
    i am able to create the routing.
    if i give group number only on the first screen of CA03 its showing the task.
    But when i give material and plant its saying the Task doesnot exist.
    And when i see the operations then it shows nothing.
    can you send me your code to [email protected]
    Please help me in this regard.
    thankyou.
    Message was edited by:
            Ravikumar P

  • Component Allocation in Rate Routing

    Hai,
    Similar to CS15 - component where used list, is there any standard transaction wherein it is possible to find out for a component in which all Rate Routing it is being used.
    Can someone throw some light on this subject.
    Regards,
    R. Vijayakumar

    Dear Vijayakumar,
    There is no standard report available for this, and what you can do is,after executing CS15 for a
    component,you will get the Where Used List (Sub-assemblies and the Assemblies).
    Download or copy this report into an excle sheet and then pass on these values to CA51 for the task list
    type R - Rate Routing.Now say suppose if you input 10 materials and if you are getting only the results
    for 8,then you can conclude that the component is been is used in so many rate routing.
    Check and revert back.
    Regards
    Mangalraj.S

  • Component Allocation in Group Routing

    Hello,
    I am working on a group routing.
    After add the group members in "Material Assignment" in CA02,
    i do the "Component Allocation" one by one for each material number.
    Is there any method to do it in a group manners or any better method to work on this?
    Thank you.
    Collinn

    Dear Collinn,
    It seems you are having one group routing(same group no and group counter no) for a list of materials.
    In this case if the BOM is common for all these list of materials,then making the component allocation to the individual operation
    makes sense.But practically the chances for such case is less.
    Moreover I would suggest you to make the component allocation manually in the routing. The reason why I doubt is you have to
    build the logic if you are going to do the same in the BDC,so the challenge here will be identifying the component no ,along with the
    item no and asigning properly to the operation.So this input has to be accurate i the input file which you will be giving for upload.
    Correct me If I'm wrong.
    Regards
    S Mangalraj

Maybe you are looking for