RSI_COPY_MASS_PARAMETER scripts for all mass activity types

We have CPS version 7 and I am trying to submit some mass activities
The first task is to copy mass parameters there are three scripts one for BILLING, BIPR and for INVOICES
Where can I obtain the scripts for copy mass activity parameters for other types, Such as meter reads?
Do I have to define them myself?
Thanks for help

Hi Joseph,
The first question to ask is for which of these 24 mass activities you really need to change parameter sets.
If you only need to copy existing parameter sets and maybe apply a date shift, then for these mass activities the standard RSI_COPY_MASS_PARAMETER will do just fine.
For those mass activities where you do need to modify the content of the parameter sets from CPS, you need to create one of these scripts. If you need to modify many parameters, this can be somewhat cumbersome, however often the mass activity structures are somewhat similar so you could start off with one of the existing scripts. And you only need to specify the parameters you need to modify, as well as the standard parameters for these scripts (on the first tab on the submit window).
Regards,
Anton.

Similar Messages

  • "Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

    hi,
    i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode".  When i press the buttom "start recording" i recieve the error message >6 117  Mass activity type  does not exist.
    Does somebody know what can i do?
    thnaks

    On the right click on HD under video quality to filter it. 

  • How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

    I want Change format mask for all fields that type's number
    Such as
    if  :parameter_value = 1 then
       all fields format mask = ' 999,999,990.000' ;
    else
       all fields format mask = ' 999,999,990.00' ;
    end if;
    Regards

    So, i have bad news for you : you'll have to rebuild again.
    Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
    Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
    Build once, play many times.

  • [svn:fx-trunk] 13366: Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts.

    Revision: 13366
    Revision: 13366
    Author:   [email protected]
    Date:     2010-01-07 22:15:50 -0800 (Thu, 07 Jan 2010)
    Log Message:
    Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts. BatikFontManager will remain a backup in the event that AFEFontManager is not found though BatikFontManager;s support is limited to TTF for legacy DefineFont3 fonts.
    QE notes: Remember that bitmap comparisons could change slightly
    Doc notes: N/A
    Bugs: N/A
    Reviewer: For Gaurav
    Tests run: checkintests, QE had run local tests
    Is noteworthy for integration: Yes
    Modified Paths:
        flex/sdk/trunk/frameworks/flex-config.xml

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • Want to take "CREATE script" for all roles existing in DB.

    Hi All,
    I want to take "CREATE script" for all roles existing in DB.
    Please provide me script to generate if you have or suggest any link or doc.
    Oracle 10G

    Use this-
    select 'select dbms_metadata.get_ddl(''ROLE'','''||ROLE||''')||chr(10)||''/'' from dual;'
    from dba_roles
    Please be aware grants will not come in the definition
    If you like the answer then don't forget to give points

  • Actual activity price does not exist for cost center / activity type

    Hi,
    We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
    We have used a customized program and have loaded the data from se38.
    All this HR data will be saved in CAT2
    Later we transfer the time related data into SAP FI/CO using CAT7.
    +When  tested  with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
    For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
    Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
    We have run the price calculation forr the FY 2010.
    Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
    When uploaded employee time sheets before, all the cost were getting claculated and were entering into  the respective cost elements, but now no amounts are being calculated and it is taking Zero.
    When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
    PLease assit
    Regards,
    shilpa

    Hi
    I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
    Regards
    Ajay M

  • MASS activity type in router

    I'm hoping someone has any ideas if CA85N can really MASS change activity types. I have been testing the transaction in our test client and have entered the material, plant, work center in the selection criteria and then in the change tab I have entered the new activity type and click the copy button.
    However, the system keeps giving me errors that there isn't an activity type for standard value for setup. But I'm not changing setup, I'm trying to change labor.
    I also get another error "consistency check is not successful when changing operation 0004. But for this one material I'm not changing operation 0004. I'm changing operation 0030.

    Hi,
    Activity Type will for a Work Center and not for the Standard Value Key. Hence when you are trying to change the activity type system will try to modify for the standard values for Setup / Operation / Labour etc. In your case I think you have not entered any activity type for the Setup, hence it is showing that error.
    I suggest you to go tcode : CR02/CR03 and check in the costing tab whether you have maintained the activity type for Setup or not.
    Hopw this will help you.
    regards
    radhak mk

  • Master record for cost center/activity type

    Hi all;
    How create a master record between an cost center and activity type?
    Thank you

    Hi
    You can create master data between cost center / activity type.
    You can link the two by planning for activity qty the combination of a cost center / activity type in KP26. Then you do a detailed planning for costs for the cost center / activity type / cost element in KP06.
    I hope it is clear..
    Regards,
    Suraj

  • Timesheet Booking - Master record for CC and Activity Type

    Hi All,
    We have maintained the Personnel number HR Master Data for Info Type = 315 as follows:
    Period: Start 01.02.2010 to 31.12.9999
    Sender Cost Center: 101067106
    Activity Type: 007000
    Period: Start 01.05.2009 to 31.01.2010
    Sender Cost Center: 101067101
    Activity Type: 006240
    I am trying to book/edit the time for Week 04.2010 [Data Entry Period 25.01.2010 - 31.01.2010] in CAT2 Transaction Code then getting an error message as-
    u201CCreate a master record for 101067106/007000u201D
    Message no. KL001
    Also Price Planning is not yet done for new/latest combination of CC and Activity Type i.e. Period: Start 01.02.2010 to 31.12.9999
    I think system is picking up latest/current Cost Center and Activity Type in an error message and not according to Data entry Period entered CC and Activity type in CAT2.
    Also one thing we have observed that in CAT2 Transaction Code CC filed is showing current Period cost Center only for all Period.
    Is it standard behaviour from Logic point of view.?
    Please suggest the solution regarding the above mentioned situation.
    Many Thanks in advance.
    Swapnil Kharul

    note that
    When are default values used from the employee master record?
    The default values are only used for new CATS records, not for changing,
    not for copying. If you also want to use the default values changing,
    not for copying. If you also want to use the default values from the
    employee master record when changing and copying from the work list, you
    can use SAP enhancement CATS0002.
    The system only uses default values, if you enter a number of hours and
    choose 'Return'.
    The cost center from infotype 0001 ('Organizational Assignment') is
    proposed, if in Customizing of the data entry profile, you selected the
    'Master cost center' field in the 'Default values' area.
    The system proposes the cost center and the activity type from infotype
    0315 ('Time Sheet Defaults'), if in Customizing of the data entry
    profile you selected the 'Cost center' field (or the 'Activity type'
    field).
    If you have chosen both fields, the cost center from infotype 0315 has
    priority, if you have defined it for the corresponding period.
    read the note 333884 it explains that only creating new values the data from 0315 defaults

  • Table for cost center / activity type prices

    Can someone give me the table name where cost center/activity type prices are stored?
    Regards,
    Manohar

    hi,
    for cost centers
    table name  =  CSKSZ
    field name =  KOSTL
    Activity prices
    table name = RKPLN
    field name =  TKF
    HOPE IT HELPS
    regards
    sayeed

  • Report for all connected Active Sync Devices

    Hi,
    Can we get a list of all connected active sync Devices from office 365?
    (With Mailbox Name, Device Type,OS, Status basically)
    Thank You.

    Hi Kavindua,
    To retrieve the list of devices in your organization that have active Microsoft Exchange ActiveSync partnerships, Please check the cmdlet "Get-ActiveSyncDevice".
    Refer to:
    Export a list of all ActiveSync accounts and devices to .CSV ,export a list of all enabled users with mailbox sizes
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Generating .sql script for all objects of a User/Schema

    Hi All,
    What are the ways in which I can generate scripts for a full USER (all objects) with dependencies. (by dependencies I mean for example that PK be created first before creating FK).
    We can export the full schema using (exp rows=n) but this will generate a .dmp file. I want a .sql file which can be run on any other machine (from SQL> prompt) so that user and all objects are created (without the need to use "imp").
    Thanks
    -AKJ

    But the easiest way to do this would be to do an export with rows=N and then an import.
    You coule do an export and then let run the import utility with indexfile=<you_name_it>.sql and this way you'll get a file with all statements included (but table definition commented out).
    Or you do it yourself (DIY-method), where you have to select all your relevant objects and their dependencies.

  • ECB Menu item for all CTs (Content Types) except folders (Without hardcoding CT names)

    Hi there,
    How to have an ECB menu item for all items only (and not on Folders).
    I canNOT hardcode the names of Content Types.
    Thanks.

    Have you tried using base content type id?
    http://social.technet.microsoft.com/Forums/en-US/cd63795b-9659-4b35-a023-c007398252a1/hidedisable-ecb-menu-for-particular-selection-in-document-library
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • Where can i find start/stop scripts for all SAP instances

    Hi,
    I installed CI, DB and Dialog instance on a standalone S10 machine and i could see start scripts under /sapmnt/RAM/profile
    START_DVEBMGS09_hostSAP
    START_D24_hostSAP
    But i cann't see stop scripts for the above and also i cann't see start and stop scripts for SAP DB instance. Could some one point me where i can find them when everything is installed on a single box.
    Thanks,
    Ram

    USAGE: STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
    FURTHER INFORMATION:
    - The executable sapstart.exe must be in the same directory
    when you start sap instacne, it will check db instance first, if db instance not start , it will automatic start db instance then sap instance.
    vice visa :
    stopsap is alos can be used.

  • Script for emailing multiple file types?

    Is there a script that will allow me to place a button on a form, that when clicked, will email the completed form in PDF format as well as in csv, or xml format?
    Thanks!

    Wow, thanks. That was extremely helpful, but I have a couple questions.
    First, is there a way to make it print to CUPS without opening the default application for the particular file first? For example, I used a .docx file, and it had to open microsoft word to send the job the print. This makers it very unpredictable to decide how much time the automator application will need to pause. If that file were for example, and adobe illustrator file, it would take an incredible amount of time just for illustrator to open. I don't really anticipate needing to do this a whole lot with anything other than text files and standard image types, but is that the only way for those other files to print? I figured that since OS 10.6 can do a quick look preview on just about any file type I use, that the OS would be able to do this without the application actually opening, but it seems not to be the case. Just wondering.
    The other issue is the only real problem, and it's one that I have had whenever I use automator to make PDFs. It always duplicates the job. So, I am getting a combined pdf, but it has the same file in there 2 or even 3 times.
    In automator, I used:
    get selected finder items
    then
    print finder items
    I have verified that it is printing everything multiple times because I see them going into the CUPS folder twice. Then, the final PDF sometimes even has the same doc or image in it 3 times. I have always had this problem with automator and PDFs, any idea how to solve that?
    Other than that duplication issue, this seems like it will work perfectly! Thanks for the reply here!

Maybe you are looking for