Runtime: Get absolute ReportDirectory Specified by an expression (SpecifyByExpression)
Situation:
- My report options are set to SpecifyByExpression and as expression:
"P:\\Data_Log\\<FileYear>\\<ClientFileName>\\<UUT>[<FileDate>][<FileTime>]_<UUTStatus>.<FileExtension>"
- In my sequence I generate pictures(.png) from measurements using this example:
How to Insert a LabVIEW Control Image into a TestStand Report
This example gets the path from the NI Teststand automation API: RunState.Report->Report->TempFileDirectory
- On that moment RunState.Root.Locals.Report is empty and
RunState.Root.Locals.ReportOptions.Directory is the default: U:\
Problem:
This generates the picture in the temporary directory and I want it to be created in the final report directory.
I want to convert the expression to an absolute path and if possible without the extension (otherwise I just add the .png)
Any sugestions?
I have found de bug(ger), thank you.
I indeed followed the process model (sequential) in C:\Program Files\National Instruments\TestStand 2010\Components\Models\TestStandModels
After Test UUT's->Determine Report File Path Expression the reportpath was, as odd as it was, indeed the temporary directory.
However... some further in the sequence (after Mainsequence Callback) there was another file path generation step dependant on the UUTstatus (passed/failed/terminated)
(at the first reportpath step there was also something mentioned about UUTStatus)
I have the macro <UUTStatus> defined in my expression, so that rang a bell.
I removed the macro from my expression and now as you mentioned my reportpath is correct!
Afterwards this is logical because earlier the path can't be known.
Conclusion: don't use <UUTStatus> if you want to use the reportpath...
Similar Messages
-
Get absolute position of mouse.
Hi,
I want to move mouse by specified offset. I'd like to use method of Robot class, but it need absolute coordinates on the screen.
So I need get absolute coordinates of mouse to count new coordinates from given offset.
Know somebody how I can get it ?
Thanks,
Vasek.There are two static methods in the class SwingUtilities: convertPointFromScreen() and
convertPointToScreen().
Mitch Goldstein
Author, Hardcore JFC (Cambridge Univ Press)
[email protected] -
Getting absolute file name using af:inputFile
Hi all,
Can you help me how to get absolute file name (e.g., C:\Documents\file.txt) using <af:inputFile> component or using any another JSF component.
Thanks in advance :)))we can't get absolute path using inputFile, we can get only the file name. as per my knowledge we don't have any other component also.
i have one of my requirement i need to read file from specified folder, so i have hard coded my folder name in my managed bean. -
Can't get itunes to connect to airport express via air tunes
Hi,
I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
Has anyone else experienced this? How can i get this to work?
Message was edited by: Toddy85You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple. So try this...
1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
2. Then find the Bonjour file in program files
3. Cut and paste it to your desktop with its contents
4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
5. Install your new version of itunes, say version 10.5, from the apple website.
6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
Hope this works...
Jim -
How to get absolute path of current directory?
Hi, everyone!
I want to get the absolute path of current directory.
Are there some APIs that I can use?
Thanks in advance,
GeorgeHi, dheeraj_tak buddie!
What do you mean in your reply?
"in File class u have all this methods for getting absolute path "regards,
George -
How to get absolute path of a form within the Forms
Aslam o Alikum (Hi)
How to get absolute path of a form within the Forms 6i or 9i
For example
i am running a from "abc.fmx" from C:\myfolder directory
can i get the form path 'C:\myfolder' by calling any any function from "abc.fmb"There is no direct call that will always work. What you need to do is call get_application_property(current_form). This may have the full path in it, depending on if that path was defined when the form was launched. If there is no path, then you need to use TOOL_ENV.GETVAR to read the Forms<nn>PATH and the ORACLEPATH, parse those out into individual directories and then check for the FMX in each.
I already have some code to do all this for you see:
http://www.groundside.com/blog/content/DuncanMills/Oracle+Forms/?permalink=4A389E73AE26506826E9BED9155D2097.txt -
How to get absolute in servlet
how to get absolute in servlet like c:\temp\apache group\tomcat4.1\test\abc.gif, thanks
do sthing like:
getServletContext().getRealPath("/abc.gif") in any servlet in 'test' to get the real path of abc.gif - The parameter should be relative to the current context -
Hey Scriping Guys!
I've been using a PowerShell script for a couple of years now to generate a monthly report showing the size of user folders on a number of departmental file servers. It's working just fine on all file servers except one where the users have gotten carried away with creating sub-folders and using realy long descriptive file names. The problem piece of script is this:
$colItems = (Get-ChildItem \\192.168.10.5\marketing -recurse | Measure-Object -property length -sum)
"marketing-serv\marketing: "+"{0:N2}" -f ($colItems.sum / 1GB) + " GB"
The reply I get is:
Get-ChildItem : The specified path, file name, or both are too long. The fully
qualified file name must be less than 260 characters, and the directory name mu
st be less than 248 characters.
At G:\data\Server_space_Report\serverspace2.ps1:37 char:27
+ $colItems = (Get-ChildItem <<<< \\192.168.10.5\marketing -recurse | Measure-Obje
ct -property length -sum)
Yes, the message is correct, however, when I connect to the server, right click the folder and chose properties it returns a size of 128 GB. My questions are
1. Why does clicking on folder properties not produce an error (what is it doing differently from my script)?
2. How can I fix my script?
Thanks,I am trying to clear up the older open posts on this forum. If this is still an unresolved issue for you please let me know. If you do not post back within one week I will assume it is resolved and will close this thread.
Thank you
Ed Wilson
Microsoft Scripting Guy -
HOW do I get my Extreme base station and Express to join a Linksys network?
OK... so I have FINALLY enabled my SLINGBOX to view remotely by totally removing my Airport Extreme & Express from the network look. I was told they are both routers and I have to pick one. The Linksys network works fine for all networking purposes... what it WON'T DO is connect my USB printer or stream iTunes to remote speakers. NOW, I have been told by using the Extreme & Express in "client mode" I can do this.
Basically HOW do I get my Extreme base station and Express to join the exsiting Linksys network?Sorry but the AirPort Extreme base station (AEBS) does NOT have a client mode.
The AirPort Express (AX) does have a client mode. The directions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode. -
How Do I Get the Best Range with the Express?
What settings should I use to get the best range with the express? What Radio Mode, Multicast Rate and Transmit Power should I use? What is the estimated area that this will cover?
+What Radio Mode+
802.11g only would be a good compromise. Here I am assuming when you say that you want the best range that you do not care if better range means lower network speed. Everything in wireless is a trade off. You cannot gain something without giving something else up in return.
+Transmit Power+
100%
+Multicast Rate+
No effect on range, but a good idea to use a lower setting in general
+What is the estimated area that this will cover?+
Not possible to predict without knowing a whole lot more about how many obstructions will be in the signal path, what they are, the construction of your home, other wireless networks and cordless phones around you, etc. and many other factors. Please tell us what you are trying to do with as many details as possible.
Message was edited by: Bob Timmons -
Hi, Im trying to get the whole path in my server, so i tried that with this following code
Get-ChildItem $sourceFolder -Recurse | ?{$_.PsIsContainer} |Get-Acl
But then, it showed me somtehing like this :
Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
but all of the trick just dont work
is there any way to solve this problem? thanksThere is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
will be relative to that psdrive and not to what is specified as the $sourcefolder.
unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate. -
Can somebody help me in getting some good material for Regular Expressions and IP Community list
can somebody help me in getting some good material for Regular Expressions and IP Community list
I'm not sure what you mean by "IP Community list", but here are 3 reference sites for Regular Expressions:
Regular Expression Tutorial - Learn How to Use Regular Expressions
http://www.regular-expressions.info/tutorial.html
Regular Expressions Cheat Sheet by DaveChild
http://www.cheatography.com/davechild/cheat-sheets/regular-expressions/
Regular Expressions Quick Reference
http://www.autohotkey.com/docs/misc/RegEx-QuickRef.htm -
I have photoshop elements 13 and want to remove photoshop elements 10 first. When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7
Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs -
Getting absolute path of a file running in remote machine
Hi,
I want to get the absolute path of a file that will be created in the remote server. Inside a directory XYZ in remote machine, the file will be created and the remote machine's address is xxx.xx.x.x. I have used the following snippet
File f=new File(Filename);
f.getAbsolutePath();
Now, in the output am getting the absolute path of the file as d:/XYZ/Filename. Is there any way to get the output as xxx.xx.x.x/XYZ/FileName ? Can someone please suggest why the server details are not fetched and instead the directory name is fetched.
I am running the program to get absolute path of a file in my remote machine. and for accessing that remote file from my machine, I use xxx.xx.x.x/XYZ/FileName.
Thanks in advance.I'm going to take it a step further and guess at what the OP is going to say next.
On host w.x.y.z there's a file /a/b/share/some_dir/file.txt.
Host w.x.y.z is sharing the /a/b/share/ directory as SHARE.
Client mounts \\w.x.y.z\SHARE as D:, so that he sees D:/some_dir/file.txt.
OP now wants to know not just that D:/some_dir/file.txt is \\w.x.y.z\SHARE/some_dir/file.txt, but also wants to know that on w.x.y.z, SHARE corresponds to /a/b/share.
@OP: If that's what you want, forget it. Part of the premise of file common drive/directory sharing protocols is that the client does not know or care and does not need to know or care what the absolute path is on the serving host. It's none of his business. -
Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack?
Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack? ie. When will we see Access 2013 Runtime Service Pack 1?
Hi,
There has no exact information about the Access 2013 Runtime Service Pack 1 now. We can continue to pay attention about it in the Microsoft Official website.
Regards,
George Zhao
TechNet Community Support
Maybe you are looking for
-
Consistency check error in sender file content conversion
Dear Experts, I am trying one simple File to File scenario in which i have only fields 1>salesorder_number 2>Description I created a txt file with line items "100,crudeoil" with file name as salesorder.txt In the sender file adapter i have configured
-
Adobe Flash Professional CC on macbook pro doesn't work?
I have a macbook pro, late 2011. I recently downloaded the trial version of Flash Professional CC, and I immediately noticed that the more I drew, the slower it got. It has gotten to the point where it takes over 10 minutes just to open a project, an
-
How do I get a personal certificate in order to send and receive encrypted emails?
How do I get a personal certificate in order to send and receive encrypted emails on my MacBook Pro, iPad mini and iPhone 4S?
-
RGB Colour change after save for web.
I recently had a folder full of images that I cut out and placed on a grey #e9e9e9 background, after using adobe photoshops Save for web feature, I saved them as 356 colour gif files. However when Ive uploaded them to the web I notice the grey #e9e9e
-
How to create multiple vacant positions in OM!
Hi all, I would like to know if there is any transaction code or report for creation of vacant positions in OM , data being uploaded from an excel/text file. Regards Bharat