Safari 7.0.6 update not installing on Mac

The Safari 7.0.6 software update doesn't install on my Mac (Mavericks). App Store reports that it was installed (multiple times) but also continues to report it as an available update. Is anyone else experiencing this?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Similar Messages

Safari and firefox freezing,updates not installing

Last week I had a problem with my laptop freezing a lot so I shut it off and it wouldnt turn back on. I brought it to the Apple store and the guy found that some system updates were not installing properly and he said that may have been the problem. He re-installed the OS and it was fine. I have brought it home and am now discovering that it is still having problems. Here are the problems I am experiencing:
1. Both Safari and Firefox are constantly freezing (showing the spinning ball). Sometimes it lasts a few seconds, other times 30 seconds or more.
2. I just downloaded some more system updates and when my computer re-started it said they could not be installed.
3. My printer no longer works. It says I need to install software in order to print, said to get the system updates. Before I got my computer fixed I never had to install anything to use the printer, I just plugged it in and it printed no problems.
This is a macbook pro with Snow Leopard OS bought in Jan 2011.

It sounds like you will have to create a external storage drive, copy your User file folders to it and remove all drives, then perform a
Restoring OS X - 10.6 "fresh install method"
https://discussions.apple.com/message/16276201#16276201
May I note if you had previously made a clone and updated it from time to time, leaving it disconnected that you could have restored from it, even if your hard drive failed to function simply by holding the option key while booting. Would have avoided this "fresh install method" which is the hardest.
Please make a clone after the fresh install, you will be glad one day you did.

Safari 3.1.2 will not install on Mac witg OSX 10.5.5

My Safari was acting erattically. Not finding helper applicatione like Adobe reader etc...
So I uninstalled it (Dragged it to the trash and went for a new install)
When I run the installer I get a message thst says
"You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer."
I'm running 10.5.5
Prithie! How do I get Safari to install again?
FYI This is a Mac Server

First of all, if you're using Mac OS X as a server, do you have Mac OS X Server installed, or just the regular Mac OS X?
Secondly, it appears that you don't know what you're doing, since there was nothing wrong with Safari, but you deleted it anyway, without considering the consequences of your actions. Then you expected to download and install it again.
*You cannot do that.* What you downloaded is an updater, which means you had to have Safari 3.0.4 already installed to be able to update it. But you deleted that and so it won't work, no matter what you do. The filename clearly says it's an Update. If you want to reinstall Safari, you must do this:
1. Repair Permissions.
2. Insert your Mac OS X install disc and navigate to the Optional Installs folder and open the Optional Installs.mpkg file.
3. Check the box to install Safari and run the installer; this will install Safari 3.0.4.
4. You can then attempt to apply the Updater you downloaded for Safari, but since you already have 10.5.5 running, it will in all likelihood not work. You will need to download and reapply the 10.5.5 Combo Update to update to Safari 3.1.2.
5. Repair Permissions.
To avoid these problems in the future, don't treat your Mac like it's a PeeCee, where deleting and reinstalling something is a common fix for application issues. On a Mac, the problem is rarely the application, so don't create more work for yourself and others.
Mulder

Why will Safari 3.1.2 update not install on 10.5.5?

When I try to install the downloaded Safari 3.1.2 a red exclamation mark shows on the HD icon and the message reads that installtion is not possible as I need OS 10.5.2 or higher. I'm running 10.5.5. What's the solution?

If you're running 10.5.4 or 10.5.5, you already have Safari 3.1.2, since the Combo Updater updates previous versions of Safari automatically upon installation. Where are you seeing that you have 3.0.4 installed?
Mulder

Adobe cc Updates not Installing on Mac OS 10.10. Everytime I try to install an update to Illustrator cc it fails and I have to uninstall and re-install the program.

After reading the forums I've notice that several people have been having this problem for a while now. The cause seems to be the deletion of additional language files. I do run CCleaner on my mac to keep it clean and reduce the hard drive space as I have a SSD as the main drive. Are there any plans from Adobe to fix this issue? It is really annoying to have to uninstall and reinstall the software every time there's an update. Is there any chance this will be fixed in the next update or 2 as I think I'm going to stop updating cc until it has been fixed?

Rudy_Two76 I would encourage you to disable the portion of CCleaner which is removing the additional language files. Many of the available updates do require these files. This is why they are installed to the computer at the time of installation. Continued removal of the language files will continue to lead to update failures.

Windows Updater Not Installing and Troubleshooter Wizard Is Not Working???

I am in need help desperately!
        I have tried to install the Windows 7 latest update since late October 2014 and every time that I have tried it has failed, this is messing with certain programs to either not run such as my Troubleshooter,
leaving me unable to fix the issue, and making my computer to run poorly as well as when I am on Firefox unable to load pages, do downloads, watch movies & TV, or watch videos on You Tube without having to move the mouse around to keep it running and just
freeze the picture on the You Tube and Xfinity but the sound keeps playing though. I am unable to run the Troubleshooter Wizard at all; gives me an error code 0x80131018. I have gone to the forums to find a solution I tried everything possible. Such
as trying to do all the maintenance; disc clean ups, compressing files to save on space, checking the disc drives for errors, defragmenting the drives, try to use the Fix It (MicrosoftFixit.malware.RNP.1343648269423620.1.1.Run, as well as: MicrosoftFixit.ProgramInstallUninstall.RNP.1343648269423620.2.1.Run,
as well as: MicrosoftFixit.wu.FISC.1341772369343897.1.1.Run,   and: MicrosoftFixit50123) all the these would not help.
        I also tried to run what information I received from viewing options from the Error Code 0x80131018 and all the HP Support Assistant and Windows Help and Support. These are some of them; SCUDownloader,
Windows6.1-KB947821-v34-x64,   HPSupportSolutionsFramework-en-11.51.0048,   HPSupportSolutionsFramework-11.51.0048,   HP CoolSense Technology - sp65424,   HP Notebook System BIOS Update (Intel Processors) - sp55068,
HP Power Manager Utility Software - sp55151,   HP On-Screen Display Utility - sp55152,   HP System Diagnostics UEFI - sp52407, and    Intel Rapid Storage Technology Driver - sp55101. All these with running the maintenance,
I also installed Boost, also ran the scans through my Norton Security, and so much more to try and fix this problem, I just can't remember everything that I tried I have been working so hard at solving this problem since of the effect of how this Windows Updater
failing at updating and Troubleshooter not working to leaving me unable to find and fix these issues.
           I am a Graphic Design Artist and I am pretty computer savvy but I am at a loss on this . If anyone has any advise on these issues please help me ASAP, I use my HP everyday and it is important for
me to have it for work purposes, concepts and so much more. My Mother got this computer for me when I graduated from college in 2012 for my graduation gift so I can do what I do.
Thank you so much for your help in trying to get this resolved without having to take it into somewhere and pay $$ that I do not have.

I recently had a similar problem - Windows 7 Ultimate. Apart from updates not installing and troubleshooters not running I started getting crashes and BSOD's
I checked that my Cryptographic services was set to auto (it was)
Press the 'Windows key" and and key "R" together   to launch the RUN box. Type
services.msc in the box and press Enter. It'll open Services Manager.
Scroll down to "Cryptographic Services" in the list. It should be set to Auto ( mine was)
I then checked my Windows updates to see when the problem started
Taking the bull by the horns I deleted the last 20 updates installed.
I restarted the computer and was amazed to find the troubleshooters working ok
I downloaded the Windows updates and installed them 5 at a time checking the troubleshooter after each batch. Everything was ok .
I can only assume the troublesome update was not re-offered or the one that installed itself was corrupt.

EAS Updater Not Installing

Anyone encountered EAS Updater not installing properly. In the documentation to verify In VersaMail, press Menu . From the Options menu, select Preferences, then select AutoSync. There is now an option for "As items arrive." I don't see this on the Treo. Any ideas?
Post relates to: None

I've heard about several different versions of VersaMail (e.g., 3.0/3.1 on the Treo 650; 3.5 update; 4.0 on the Centro). You might check and see whether you have the correct installation instructions for your version.
Post relates to: Treo 800w (Sprint)

System updates not installed/downloaded

I noticed in the ThinkVantage Systemupdate history several Windows 7 updates that did not install or download, but I am not able to select them from the history to try again. Why do Windows updates not install and hoew can I move the failed installations back into the upgrade list?

It is possible that in the meantime, Windows Update downloaded and installed the same updates, which would cause TVSU to not detect it as there is no need. Check in the Windows Update history for the same updates.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Safari 8.0.2 will not install

Running Yosemite 10.10.1. The Safari 8.0.2 will not install. Says it has installed several times in the App Store but is also still available for download. Have checked Safari itself and the version is still 8.0.

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

Adobe Acrobat 8 - file updates not installing on Win 7 Professional

How do I install MSP file updates to Adobe Acrobat after downloading them? I have just installed Acrobat 8.0 from the original installation CD on a new PC running Windows 7 Professional (64 bit) and have downloaded the update to 8.1.0 to begin with, but on clicking it get the error messsage 'This patch could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package'. Updater is not working at all. It says it cannot find any updates. Even when I place the MSP file in the Updater folder to which it is supposed to download updates, it does not find updates. What is wrong? Why won't this patch install? Thank you! I really don't want to be stuck with 8.0.0 when I know that years of updates through to 8.3.1 are available, but for some reason they will not install intuitively.

Hi ,
Acrobat 8 is not compatible with Win 7. Please find the mentioned Kb: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#main_System_requirements_for_Acrobat_8_Pro showing system requirement for installing Acrobat 8. As Acrobat version 8 is very old product so I would recommend you to purchase Acrobat11 which has more enhanced features and functionalities.
Regards,
Romit Sinha

SCCM 2012 R2 - Updates not installing

Hi all,
I have a SCCM 2012 R2 setup at a customer which has problems with distributing updates to the Windows 7 computers in the environment. The update group (with updates that are 100% sure required) is deployed to some test computers but the updates don't get
installed. It is also configured to be able to install the updates without looking at any maintenance windows. I see in the reporting that the updates are required, so in my opinion they should get installed.
I've checked the registry and the Windows Updates registry keys are pointing towards the right server (my SCCM primary site server). I've created a new software update group with fewer updates, same problem.
What I find in the UpdatesDeployment.log on one of the test machines is rather strange:
Assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B} has total CI = 2
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) reconnected to the existing job ({779CA9E2-ABB8-43E1-B8AE-F4A94BA8C761}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment {c076f100-c2f7-43f9-a3f9-51fd33872b94} has total CI = 216
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({c076f100-c2f7-43f9-a3f9-51fd33872b94}) reconnected to the existing job ({A9758363-1871-4BD9-86D9-1BE0D82531AE}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
OnPolicyModify for assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B})...
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
Work in progress for assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B}, forced trigger (TriggerEnforce) will be attempted when done
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4532 (0x11B4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4000 (0x0FA0)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Removing scan history to force non cached results
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 15:46:47 4836 (0x12E4)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>True</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 17:06:31 6032 (0x1790)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Suspend activity in presentation mode is selected
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Proceeding to non-business hours activites as presentation mode is off.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Attempting to install 0 updates UpdatesDeploymentAgent
29/09/2014 22:00:00 3240 (0x0CA8)
No actionable updates for install task. No attempt required.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Updates could not be installed at this time. Waiting for the next maintenance window.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
No current service window available to run updates assignment with time required = 1
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
Attempting to cancel any job started at non-business hours.
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
There are several updates found in the assignment (2 in the first, 216 in the second). Some of them are required but still the log says: No actionable updates.
The SERVICEWINDOWEVENT events originate from the business hours set in the client settings I suppose?
But I don't get why the log sais "No current service window available to run updates assignment with time required = 1"
Any advice?
Kind regards,
Bert

Hi,
What's the status in Software Center on clients?
Please check ScanAgent.log, WUAHandler.log, UpdatesHandler.log and Windowsupdate.log on the client to see if there is any helpful information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10.10.2 will not install - tried Mac App Store and Delta updater

I'm trying to install the 10.10.2 update on a 15" MacBook Pro (Mid 2010) which currently has 10.10.1 on it and its not going well!
The Mac App Store shows the 10.10.2 update, I click Update and dropdown says "Some updates need to finish downloading before they are installed. Your computer will restart to complete the updates." with the options "Not Now" and "Download & Restart". Doesn't matter which one I choose, after a click the update progress bar appears for a few seconds and then reverts back to displaying the Update button again. Have restarted, fixed permissions etc and it makes no difference.
So I downloaded the Delta update (not the combo) and go through the install steps and the system restarts to compete the installation, but the system simple restarts and does not update to 10.10.2, its still at 10.10.1. Have tried a few times, always the same.
One slightly odd issue is that the Apple remote Desktop update 3.8.2 appears to have been installed 5 times in the "Updates Installed in the Last 30 Days" section of the Mac App Store and yet it also still appears in the updates available section below the 10.10.2 update.
I've repaired permissions, restarted, checked Activity Monitor for any non responding services and checked disk space availability - 170GB available. Can't see anything obvious.
Anyone else having trouble installing this OS update?
Thanks

I have the exact same problem. Tried to install the normal and combo update. Nothing happens.
I tried the repair permissions and even the reset password method. Nothing.
Did the system restore help ? did you try to re-install yosemite first keeping your files and applications ?
It's really weird.
Thanks
MacBook Pro 15" early 2011, OS X Yosemite (10.10.1), 16GB Ram

I can't get on safari due to a update i installed about 6 months ago

safari crashes due to update i intallled 6 months ago. how do i resolve this

Debra...
Most likely due to a third party Safari add on. Try the troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If you can't resolve the problem post a crash report so we can find out why Safari's crashing.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

11 Updates not Installed Not Needed

KB3021952
Kb3004361
KB3013445
KB3023562
KB3029944
KB3031432
KB2976978
KB3016074
KB3019858
KB3020338
And the Malicious Software Removal Tool Windows 8 and 8.1 for February 2015
All show up in Windows Update but won't install because it says they are Not Needed.
Are there any know fixes?

I, too have the same problem with Windows 8.1, only it's 12 updates, not 11.
The following will not install (It says they were installed. It also says they were "not needed")
Security Update for Windows 8.1 for x64-based Systems (KB3023562)
Security Update for Windows 8.1 for x64-based Systems (KB3029944)
Security Update for Windows 8.1 for x64-based Systems (KB3031432)
Update for Windows 8.1 for x64-based Systems (KB2976978)
Update for Windows 8.1 for x64-based Systems (KB3016074)
Update for Windows 8.1 for x64-based Systems (KB3019868)
Update for Windows 8.1 for x64-based Systems (KB3020338)
Windows Malicious Software Removal Tool for Windows 8, 8.1 and Windows Server 2012, 2012 R2 x64 Edition - February 2015 (KB890830)
Cumulative Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB3021952)
Security Update for Internet Explorer Flash Player for Windows 8.1 for x64-based Systems (KB3021953)
Security Update for Windows 8.1 for x64-based Systems (KB3004361)
Security Update for Windows 8.1 for x64-based Systems (KB3013455)
The update settings were set to automatically install, but I changed them to download automatically and install manually, and deleted the SoftwareDistrubution/Download folder contents to re-download the updates.
They don't re-download.
The log says the last updates were installed 1/24/2015 (which should be correct), and no new updates have been installed for this cycle.
Windows Update is running correctly. This is the only Win 8.1 machine in the network with this issue (Mixed OS network with about 8 Win 8.1 machines). All other Win 8 machines have installed THESE UPDATES successfully. There are no known
differences in configuration between them.
Thoughts to fix this?

Safari 7.0.6 update not installing on Mac

Similar Messages

Maybe you are looking for