Sales area assignment for BP

Dear all,
We are sending BP from CRM to SAP R/3 system along with Sales area data,some of the BP got failed while sending into R/3.After analysis in SAP R/3 Customer master assigned into specefic sales areas.
Can we do the same in SAP CRM,like BP can assigned selected sales area?.
We are able to see "Choose sales area" button all sales area we want to restrict them.
Is it possible in CRM?
Thanks in advance
Regards,
muki

Hi Muki!
U can use authorization object CRM_BP_SA (located in container CRM in SU03) in CRM to restrict the sales area´s a user can see.
Regards
Chris

Similar Messages

Problem in Customer and sales Area assingment for STO

Hi Gurus,
I am working on STO cycle , while config. of STO in first step when i assinged customer and sales area to plant in NODE
"Define Shipping Data for Plants" ,here i can assinged only one customer belongs to only one Sales Area.
For Eg :- 1000/10/00 is my sales area and customer is 01
I assinged this to plant SID.
Now if i want to assinge different sales area for the same customer , Because STO will not ne happened only for one Division , it will transfer goods from many division from a single plant ,So how can assinge more division or more than one sales area to a single plant.
If through COMMON DIVISION , this problem is resolved please explain ,How means step. Because i want to assinge min 10 sales area to asingle plant means may be have to create common division funada, But how I m not getting.
Please Reply ASAP.
Devdatta Joshi

Dear Joshi,
1.First you do the common divisions and distribution channels through the t.codes VOR1 and VOR2.
2. You assign common sales area to the suppliying plant which you have difined in the common divisions and distribution channels.
i.e you maintain one division and one distribution channel as reference to all other divisions and distribution channels.
3.The purpose of the assigning sales area data to suppliying plant is, we are allowing the system to sale or transferinmg the goods from that suppliying palnt.
I hope it will help you
Thanks,
Murali.

How to Extend Sales Area data for a BP

Hello Experts,
I am working on CRM 7.0 and the requirement is to add a new new field in Complaints Tab in Sales Area Data screen of Business Partner in GUI as well as WebUI.
Question-> Can we add the new field in WebUI using AET? Does it supports extension of relevant Assignment block(Sales Area data->Complaints and Returns)? If yes then how can we add the same field in GUI after that? If not then what is the alternate solution and Can we use BDT to fulfil this requirement?
I assumed that EEWB does not supports extension of Sales Area data for a business partner. Please let me know if I have got it wrong.
Regards,
Amit

You can use AET to extend the sales area data of BP. However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
Regards,
Shaik

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Importance of Sales Area Data for BP

Please give me the various reasons for having or maintaining Sales Area for a Business Partner:
_Explanation:_ What is the importance of maintaining Sales Area Data for BP.Please list out several points.
As we know Sales Area is composed of : Sales Organisation, Distribution channel, & Division.
Thanks & Regards,

These are off the top of my head. I can reply a bit later to add some more.
1) The pricing procedure (entered in the Billing Tab) which affects the LEAD, OPPT, AG, QCTR, and TA documents. Without the pricing of the product, the transactions cannot be executed and the total product value cannot be determined. Without a total dollar value, a TA doesn't make sense.
2) The S.O defines the legal terms for the product and if the BP wants to return the product they ordered, they have that information.
BB

Customizing Message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer spezific text or to redirekt to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check these threads.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Cusomize message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer specific text or to redirect to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check this thread.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Can we activate the Sales Area Tab for Prospect?

Hi all
My client requirement that
When ever we creating a Sold to party subscreen sales area will be activated, for the same can we activate sales area tab for Prospect is it possible?
Help to implement this.
Regards
sathish

Hi Satish,
Your requirement sounds very un-usual to me. Sales area data will only be seen when sold-to is maintained.
I don't see any requirement why a prospect is to be maintained in a sales area, especially when he/she is not yet started any relation with sales organizational data.
It is better to promote a prospect as customer as and when required, rather than implemeting a complex code changes. Give a try to convience your business.
This is my general comment and not debating on your requirement.
<b>Reward if helps</b>
Regards,
Paul Kondaveeti

Sales area creation for existing customer

Hi Guru's,
Good Day to all.. .
Here my requirement is i need to update the customer data in KNVV table based on below conditions.
My Selection screen is
Customer :
Sales Org :
My checks are...
The program has to check if each inserted customer (select options) is opened on all the sales areas based on the inserted sales organizations (salesorganization + Distr. Channel = “FF” + Division = “AA”/”BB”/”CC”/”DD“).
If the involved customer isn’t created on all the sales areas (select options) it must be automatically opened on the missing ones.
It means before creating i need check that customer is available in the above mentioned divisons or not.?
If customer is not available with the above divisions i need to create a new reocrd with missing division (remaing field values are same only diviosion will get change)
For this do we have any BAPI's . I have checked few but i could not find the correct one.
Can anyone please help in this regards.
Thanks in Advance
Sravan Kumar

Hi there,
Customer master data will usually have external num assignment where you will give the customer num manually. If that is the case, create a new customer master ABCD in VD01 for sales area 1000 / 01 / 01 for eg. If you want to extend the same customer to a different sales area, then in VD01, give the custromer name ABCD & give new sales area details 2000 / 02 / 02. Then ABCD will be extended to both sales areas. But make sure that you assign the shipping / billing & partner data accordingly.
Same way if you want to extend the customer to different company code. You do it in XD01.
Is this what you asked?
Regards,
Sivanand

SALES AREA ASSIGNMENT TO SALES DOC.

hi,
while assign sales area to ordeer types And click to new session system showing error that define 1000/10/00 first as a general sales area.and system showing display .So how I can over come this issue.
Thanks,
RAJ.

Dear Rajendra,
First you do the combine sales organisations , combine distribution channels and combine divisions steps in the same screen before going to step assign sales order types permitted for sales areas.
Now you try with the last step assign sales order types permitted for sales areas. system will accept.
I hope your issue will be resolved
Regards,
Murali.
Edited by: Murali Mohan.T on Feb 28, 2008 6:37 AM
Edited by: Murali Mohan.T on Feb 28, 2008 6:38 AM

Sales Area check for custom partner function

When processing sales orders in our system, it does not check the sales area for the customer of a custom partner function. Can this be setup via config or is there a an exit that can be used for this.
Thanks,
Roy

Yogesh -- Thanks for your response. However, it does not address the functionality issue.
Currently, I created new partner function ZZ (for example).
I assigned this partner function ZZ to account group Z000.
I created new partner XYZ in account group Z000, in sales area XX00/XX/XX.
I created a sales order in sales area YY00/YY/YY.
Problem is that system allows me to assign partner XYZ to this sales order.
How do I prevent this?
How do I enfore that system will only allow partner XYZ in the sales order, if the partner is created in the same sales area?
Edited by: krist d on Dec 13, 2010 4:33 AM

Sales Area Data For Account (CRMM_BUT_FRG0080) - FM needed

Hello experts,
i search for a bapi (or FM) to assign new sales area data to an account. I need to do this without creating a contact-assignment (Leave CRMM_BUT_FRG0081 blank).
I know the table CRMM_BUT_FRG0080, but i have no success in searching for an FM.
Any ideas?
Regards,
Mario

Hi Mario,
You can assign sales area data to an account using the FM:BAPI_BUPA_FRG0010_ADD
Just fill in all the required fields in import parameter SALES_AREA and DATA.
Your query will be resolved.
Regards,
PePe

Automatic creation of Company Code and Sales Area Data for Customer Master

Hi,
We have a organisation structure setup with multiple company codes and sales areas.
A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
I'm reluctant to use BDC's because of performance. We are in a Retail environment.
Thanks in advance
Craig

The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

Sales Area assignment to Transaction Type.

Dear all,
We are using SAP CRM 5.0and am in the process of rolling out CRM Sales to a new Company of us.
I have defined the Organization Management in C21 System and completed the Assignment of Sales Area to the Transaction Types in Development landscape.
Now i need to move the settings to QA landscape.
As the assignment of Sales area is a transportable object, i transported the same to QA landscape but the organization number ranges which has been created in QA landscape are different,
how do you I bring same Organization Number to QA landscape from Development as it is not a transportable object?
It is the only way to Change the system settings in SCC4 and change the settings manually.
Kindly give me your inputs how to go ahead.
Satish

Hi,
Check if the following thread helps.
[Transport Org Structure;
[Transport of Organization Structure;
[Transport Org Structure;
Regards,
Arun Prakash
Edited by: Arun Prakash Karuppanan on May 11, 2010 3:38 PM

Sales area duplicated for the Business Partner

Hi gurus,
I replicated the BO from R3 to CRM, and all the maintained sales area in R3 have been duplicated in CRM with and wihtout division.
Example:
In R3 for the BP 234
we have the sales area:
Sales Organization: BIOS
Distribtn Channel: 01
Product Division: AA
And in CRM you have:
Sales Organization: BIOS
Distribtn Channel: 01
Product Division: AA
And
Sales Organization: BIOS
Distribtn Channel: 01
Product Division: (without division)
Any one knows if it is normal, or is there a way to stop the replication without division.
Thanks,
TPT

Hi,
In the BP go to Sales Area Data and select sales tab. In that select the sales Org,D.Channel,division for which you want to maintain and enter all the detail in all the tabs (shipping,Sales,Billing etc) and save the BP.
Regards
Vinod

Sales area assignment for BP

Similar Messages

Maybe you are looking for