Sales Area is not visible in CRM for the products downloaded from R/3

Hi Experts,
Our client is using CRM 2007 and R/3 4.7.
connectivity was established via Middleware.
Before downloading the materials from R/3 we have done the following things
1. Following customizing objects were downloaded
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SALES
DNL_CUST_S_AREA
2. Org structure was copied from R/3 using the Tcode - CRMC_R3_ORG_GENERATE.
3. All the required sales are were correctly maintained( Downloaded ) in the org structure and under attributes tab " Object permitted for determination was selected".
4. Executed the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
After down loading the materials also we have executed the above report.
But the sales area details are not coming with the product.
Not: If I try to create a product in CRM I was not able to assign Sales area, ASSIGN button was in disabled mode.
Could you please guide me to solve this issue.
Thanks in advance.
Nadh.

Hi Nadh,
Can you please check if all the condition tables are replicated correctly from R/3 to CRM. Eg ZDNL_COND_A805 and DNL_COND_A191.
I hope the initial download for the same would be completed.
Because there might be some fields relating to Material and Sales Area in these condition tables, which might not have moved to CRM.
Thats the reason I am asking to check.
Thanks.
Best Regards,
Arun Sankar.

Similar Messages

Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

How to Read the internal table for the data download from the spool

HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,

Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun.

Sales office is not visible in dropdown listbox on BP Organisation tab

Hi Experts,
we use CRM 4.0 with R/3. I have created a new sales office in ppoma_crm transaction in CRM.
Under the function tab I set everything like in another sales office but if I want to choose my new sales office in BP transaction under Organization tab the new sales office is not displayed.
Thanks for the help in advance!
Regards,
Tom

Hi Thomas,
Go to PPOMA_CRM transaction and select the org with sales group details
Go to Attribute tab in lowermost right hand window. Select scenario, sales.
Check the option 'Permitted for determination'
Save the settings.
Go to SE38.
Execute report: HRBCI_ATTRIBUTES_BUFFER_UPDATE
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

HT1539 how to get the french track for the digital download

how to get the french track for the digital download from having purchased a DVD at the store

Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H.

Approve Button not visible in Tasks for Leave request in Tasks- MSS

Dear gurus,
Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
Any suggestions....
regards,
Rajasekar.

hello Bala,
there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
Thanks alot Bala..
In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
Regards,
Raj

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Elements 11 albums not visible in iTunes for synching

I've recently upgraded from Elements 8 to 11. New albums created in organiser 11 are not visible in iTunes for synching to my iPod. All of the albums created in Elements 8 are still visible. Is this a bug or is there something I need to do to make the new albums visible?

Yes I’m sure Adobe think it’s a third party problem and probably have little interest in synching with Apple devices. It’s a bit disssapointing and whilst Mac users can sync with iPhoto or Aperture, the majority of users will be using Windows and will wish to sync their PSE11 albums. Hopefully Apple & Adobe will talk to each other.
There is a work around but it involves first creating the album in PSE10 (or your earlier version) and importing it into PSE11. It will then be recognized in iTunes when you connect your device and click on the Photos tab. Let me know if you want instructions.

Certain Http Server Errors not visible in logs for Azure Websites

I noticed that a lot of times (but not every time) Http Server Errors on my Azure Website (an ASP.NET MVC app) don't show up in any logs, although they are recognized by Azure. E.g. I get alerts that Http Server Error count > 5 in the last 15 minutes,
I see the error count on the Portal under Monitoring/Requests and errors however these errors are not visible in my application's own logs or in the eventlog.xml. Thus I also can't troubleshoot them.
Now I'm not totally sure (and can't find any hints about) what exactly "Http Server Errors" mean in Azure terminology but since 4xx errors are handled separately by alerts I'd guess these are 5xx errors. If indeed then I don't understand why there
are apparently errors happening that are not visible at least in the event log?

Hi Zoltán Lehóczky,
For your issue ,I suggest that you could try to enable site diagnostics and application diagnostics in Azure Management Portal.
In site diagnostics ,it will logs Detailed Error Logging which logs detailed information for HTTP status codes that indicate a failure (status 400 or greater).
Then you could access the folder "/LogFiles/DetailedErrors" via Ftp to check Detailed Error Logs which provide any HTTP errors have occurred.
For more information ,I suggest that you could refer to the link below:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-enable-diagnostic-log/
Best Regards,
Kevin Shen.

"Sales area is not defined" error while creating IBD

Hi All,
We are getting the below error while creating IBD:
Sales area    is not defined
No inbound delivery created for the replenishment delivery 0089799561
We are trying to create IBD from OBD.
We have the Z output type ZPED, which is basically same functionality as SPED.
When we trigger the ZPED in OBD, an idoc will be triggered and IBD will be created automatically.
Here in this case, we are getting the error when ZPED is triggered and we are seeing this error from the processing log of that output.
Below is the details of the processing log of failed ZPED:
Object 0089799561
   Output type: Stk.Transf.CrteDeliv
   Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATI
   Sales area    is not defined
   No inbound delivery created for the replenishment delivery 0089799561
ZPED is triggered by a batch job in the system but when we are trying to manually trigger it, it got successful.
Please suggest what can be the root cause of it.

First of all, please avoid using abbreviated words which is not encouraged here. Second, what is the Business process that warrants you to create inbound delivery against outbound delivery. Whenever you post here and expect assistance from members, please ensure you provide maximum details with regard to business process and what you had configured so that it will be easy for others to understand.
G. Lakshmipathi

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Business Area is not visible

I have Discoverer 10g 9.0.4. The EUL is visible by a couple of accounts. Of the accounts that can see the Business Area, I can revoke the BA and it disappears from the user. I can then grant it back to the user and it is visible again.
With a new database account with the same database permissions as the other accounts, the business area is not visible. I can log in with one of the "bad" accounts I can see the EUL5 tables. I can see that in EUL5_ACCESS_PRIVS and EUL5_EUL_USERS these accounts should be able to see the business area but no matter what I do in Admin, nothing is visible. What am I missing?
I've even tried granting select on all EUL5 tables to public but that did nothing. I tried granting administrator access to these accounts but that didn't make the BA visible either.
I tried another desktop with Discoverer Administrator installed and tried granting/revoking access to these accounts but that didn't help either.
HELP! :)

I did the following as a test:
create user test_disco identified by test_disco default tablespace tools temporary tablespace temp;
grant connect to test_disco;
grant dba to test_disco;
-- Next, use Discoverer Administrator and grant access to the BA
-- Next logon as TEST_DISCO and run the select statement:
select b.ba_name
from EULOWNER.eul5_eul_users u,
EULOWNER.eul5_bas b,
EULOWNER.eul5_access_privs p
where u.eu_id = p.ap_eu_id
and b.ba_id = p.gba_ba_id
and u.eu_username = user
-- one row returned
-- Next, connect with Discoverer Desktop or Discoverer Plus as TEST_DISCO and unable to see any Business Areas.
What is going on?

HT5085 I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?

I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?

Have you deleted anything from your iTunes library ? Have you checked to see if they are still on your computer, but not listed in your iTunes library ?
If not then do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for redownloading ? If they don't show there and others do and they are still in your country's store, then check to see if they are hidden : http://support.apple.com/kb/HT4919
If they are no longer in your store for redownloading (or you aren't in a country where music videos can be redownloaded) then you will need to copy them back from your backup of your library/downloads.

NQSError: 15001 Could not load navigation space for the subject area

Hi gems,
I am creating repository with some subject areas from one of the Old repository which has no errors. New repository is giving error as
nQSError: 15001 Could not load navigation space for the subject area
nQSError: 15004 Internal Error: Missing Functional dependency association for the column
But actual for particular column n OLD Repository it is not giving any error
Can anyone help me why this is giving this error.
Thanks
Manu

Hi Manu,
Please check if all the columns in the copied subject areas are having links to BMM layer and physical layer columns. If the pulled tables does not have proper joins with other BMM tables, it also will cause load naviagtion error.
While copying the subject area from another RPD you must have missed some objects or joins. Please verify.
Thanks
Krishna

How can I get an in app purchase that never synced w/ imac onto comp from my old 3g so that i do not have to 'repurchase' for the 4 (2 apps are groove and doodle buddy)?

how can I get an in app purchase that never synced w/ imac onto comp from my old 3g so that i do not have to 'repurchase' for the 4 (2 apps are groove and doodle buddy)?

SO, do I delete the app off of both the old 3g phone AND the imac, then reinstall on ONLY the imac, then re sync? OR, should I delete off computer, repurchase on computer then re-sync with new iphone4? I realize this is kind of roundabout, but the issue I ran into was too much stuff on my old 8GB 3G, and I was stuck on iOS3 FOREVER (couldn't upgrade to iOS4) soooo, I deleted a whole bunch of piddly apps from the phone ONLY, which then allowed me to update to iOS4 (on the 3G). Then, I could sync (which I did, but obviously not everything transferred, b/c when I synced the new 32 GB iphone 4, there are particular apps {doodle buddy and groove, my tap fish...} that are missing the in app purchases, but these are still on the old 8GB 3G). I am so confused....

Sales Area is not visible in CRM for the products downloaded from R/3

Similar Messages

Maybe you are looking for