Sales Order - Allow Item Changes with conditions

Hello, i'm new to SBO and this forum.
I want to know how can i allow to change the items on a sales order when sales order is in place and awaiting authorization but establishing a condition based on an items property (classification) and blocking the possibility to change the price.
Thank you very much for your help.
Regards,
GuillermoL.-

Hi Gordon,
Can you give me an example to establish this control o that SP?
i'm really poor writing Transact-SQL code, but i'm learning on my own and with several online forums and tutorials.
Let's say i have 10 items (itemcode = 100 to 110) that have the same value on userfield or the same property group
(U_Userfield = 100 or QryGroup10 = Y)
And i don't want the price to be changed.
Thank you in advanced!
Regards,
Guillermo.-

Similar Messages

CRM sales order line item change with ECATT

Hi All,
We have just started to use ECATT's and have a scenario where in a CRM sales order certain line item data needs to be updated as part of the test.
The problem we have is in the selection of the line item. The filter option based on the line item column appears to be the best approach, and then double click on the item which is displayed to get to the item tabs.
When the parameters are being set everything is available and can be defined - when run however failure occurs at the filter stage.
Anyone got any ideas?
Al

Hi Alan,
Which mode of recording you are using, TCD or SAPGUI ?
And could you let me know the error, that you get.
Regards,
Sandipan

Sales Order Line item status with Resource Related Billing

Hi
The Resource related billing is done based on the costs accumulated on account assigned WBS Element. The WBS Element system status is set 'Finally Billed'. The overall status of Sales Order line item is still 'open' and does show up in 'Open Order' reports.
SAP vide their note 439288 recommends running report SDVBUK00 to correct the sales Order item status. However this note is applicable only upto 4.6C. Our system in ECC 6.0. We tried running this report and did not get desired results. We checked the program and discovered that the corrections suggested as per above note, are not available.
Is there any new SAP note applicable for ECC 6.0 needs to be applied ? Or is there any other report needs to be run in case of ECC6.0?
Thanks in advance
with regards

HI,
Please raise message to SAP through service marketplace.
Thanks,
Vrajesh

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Billing Block status in Sales Order doesn`t change with change in Item Cat

Hi Experts,
I have a peculiar problem once I am creating a Contract. In the contract I enter a material with default item category (with Milestone Billing Plan & Billing Block assigned to it),but once I change this Item Category to the other item Category (having No Billing Plan & No Billing Block assigned to it), then the Original Billing Block in the contract for this material does not disappear(the vice-versa of this scenario is not there).
Request for your help on this issue.
Thanks,
Vivek

HI
Check controls of document in VOV8 any billing block is assigned for the document.
Regards
santosh.A.R

How to activate Approval in Sales Order for the UDF with condition

Dear Expert,
 I have created the UDF field Rebate(type amount) in Sales Order.I want to activate the approval procedure for this UDF with condition where Rebate is greater then Zero.I had applied the query and Activate it in approval procedure.--
SELECT (Case When IsNull(count(T0.[DocEntry]),0) <>0 Then 'True' Else 'False' End) AS TF
FROM Ordr T0 where DocType='I' AND t0.U_rebate >0 and convert(Varchar(20),T0.[CreateDate],103) =(select convert(Varchar(20),Getdate(),103))
But I found that the approval procedure activate every time inspite the Rebate field is Zero.
Plaese suggest some soloution for it.
regards,
PankajK

Hi Pankaj......
Try this.......
Select Distinct 'True' From ORDR T0 Where T0.U_Rebate>0 and T0.DocType='I' And T0.DocNum=$[ORDR.DocNum.0]
Hope this will help you.......
Regards,
Rahul

Cannot reject/delete sales order line item due to del.date in 2210

Hi all,
not sure if anyone else had this issue already....
Situation :
Sales order line item entered with delivery date in 2210. We would like to correct this order but can't....
every time SAP issues error :
Error determining posting period (info
S008, variant GL, RC 3)
I believe this is because we haven't maintained our calendars yet for 2210 :-D
Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
Thanks for your help!

If the system pop ups the error message M2012, then please refer note 10891 or 37532. If the error message number is different, please update the forum.
thanks
G. Lakshmipathi

I have a problem regarding sales order line item with confimed quanity

Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,

Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards.

New sales order and Change sales order in item level or delete at item leve

I got one requirement. Daily i have to display one report on new sales orders created on that day and any sales order item is modified or any item is deleted or any item is added.
                  How to get the sales order numbers and position numbers which will follow above creteria. I found one function module but it is not giving position numbers and new sales order details.
         Is there any BAPI for this requirement.

I am using "CHANGEDOCUMENT_READ" function module to get the new sales orders created and changed sales order items on a particular time. This function module is getting data from CDHDR and CDPOS tables. But only change sales orders is coming. New sales orders which is created on that time is not getting.
          One of my friend is telling like we have to activate one change pointer to retrive new sales orders also. Which is like there will be one check box.
Is any body having idea on this. Please reply me on briefly with the code to retrive new sales orders and changed sales orders

Problem with sales order line items

hey All,
I wrote a simple test program this morning Using DI API that creates and updates orders, and I found some weird behaviour:
1. Once an order is created, if a line item is deleted off the order in B1 - the updates work fine.
2. If an item is added to the end of the order, the updates work fine.
3. If an item is added in the middle of the existing line items, the next update does weird things - it swaps prices and item keys and screws up the order total.
4. If an item code is changed to an existing item (such as changing the AddModel the actual item code), the update does weird thing, same as #3.
Has anyone experienced issues such as this? Or has anyone successfully completed an application like this that works properly?

Ok can anyone from SAP comment on this please? I have some more details if you want to duplicate this.
My simple program just creates a sales order from DI API. Then you complete step 2, 3, 4 as listed below using a Business One Client.
I then go back to my program and do some simple updates to the sales order through DI API using the SetCurrentLine method and looping over the Lines object count. Once I call the update method and go back into B1 to look at the order the DI API has updated the wrong items.
Anyone have any ideas or run into a similiar problem? We are desperate here for a fix.
Steps to duplicate
1. Create B1 sales order using DI API with 4 line items for example
2. In B1, delete a line item in the middle of the order
3. Change the first any item Code to a different item
4. Save the order in B1.
6. Run a sales order update from DI API.
7. Recall the order in B1 - the totals will be all jacked up and the prices will no longer match the items

Conditions KONV table for Sales order Line item.

Hi Friends,
What are the key fields bw vbap and konv table.
requirmnt is : need to fetch conditions ( from KONV table ) for the sale order line items.
thanks in advance.
Jai.

Hi,
1. Fetch field KNUMV from table VBAK for that particular Sales Order No i.e VBELN.
2. Goto KONV & based on KNUMV, KPOSN and KSCHL (condition type), fetch the required condition details along with its net price (KONV-KBETR) and net value (KONV-KWERT).
KONV-KPOSN = '00000' -> Header Condition
KONV-KPOSN = '00001' -> VBAP-POSNR = 10
Reward points if the answer is helpful.
Regards,
Mukul

How to unlock sales order number after changing its line item statuses.

hi all,
        my requirement is i am changing the status of the double
       clicked sales order which is showing in ALV grid display
       before that i am locking that sales order using FM
       CALL FUNCTION 'ENQUEUE_EVVBAKE' and for
       changing the status i am using FM
        CALL FUNCTION 'STATUS_CHANGE_EXTERN'
        which doesnt have commit statement inside this FM so
       i have explictly written this commit statement if this FM
       gives SY-SUBRC = 0 but with this statement it unlock my
       sales order because of the commit functionality.
also this FM is in loop for all line items for that sales order
please help me with that!!!!

Hi,
I have created delivery against sales order.
While picking (during delivery PGI), I selected two batches to suffice the delivery qty. Please refer the example quoted below.
Sales order (SO1) - Material (Mat1) - qty (15 ea)
Delivery against sales order (Del1) - batch split: batch1 - 10 ea
                                                                     batch2 - 5 ea
In table LIPS: when I enter delivery number as "Del1" and execute, I get 2 records:
   del no.     Item No.      Material   Qty       Batch no       Sales Order no     Sales Order Item no
1. DEL1       10              Mat1        10 ea    batch1          SO1                    10
2. DEL1       20              Mat1         5 ea     batch2         ______                 ____
Thus in the 2nd record, the Sales order no.(LIPS-VGBEL) and sales order item no. (LIPS-VGPOS) does not get updated.
I have to develop a report to display the Sales Order number and sales order line item number for each batch of the Delivery for the same item number. Please guide me to know how I can get the same.
Hope this clarifies the issue faced.
Regards,
Ankush

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Create purchase order with reference to Sales order Line item

Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi Nemani

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

Sales Order - Allow Item Changes with conditions

Similar Messages

Maybe you are looking for