Sales order change error in CRM

Hi All,
We are replicating sales orders from SAP to CRM.
but when I try to change the order in CRM (using CRMD_ORDER transaction)
it says "Original document is in OLTP and therefore cannot be changed in CRM"
Why Can't I change the sales order in CRM
is it because of transaction type configuration in CRM side
In configuration for transaction type "Inactive field is marked as "Y Blocked for Online Maintenance""
Is that the reason why I cannot change the order in CRM?
Should I make it blank so that I could change orders?
Thanks
Ken

HI,
Yes, you have keep that Inactive field as Blank in the transaction type.
Also maintain the following entries in the table SMOFPARSFA in crm as
PARSFAKEY = R3A_SALES
PARNAME = INT_CHANGE_ORDER
PARNAME2 = "Transaction type"
PARVAL1 = A
And in ECC maintain the following entries in table CRMPAROLTP
PARNAME = CRM_SCENARIO
PARNAME2 = INT_CHANGE_ORDER
PARNAME3 = "Transaction type"
PARVAL1 = A
After doin all this you can try editing the transaction in CRM.
Regards,
PP

Similar Messages

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Calling a Sales Order Change BAPI in a Sales Order Exit

Functional Requirement:
While creating a Sales Order with Reference to another Sales Order, on saving the new sales order, change something in the referenced sales order.
I am trying to achieve the same by doing the following:
In the standard SAP user exit called during saving the new sales order USEREXIT_SAVE_DOCUMENT I am calling the BAPI BAPI_SALESORDER_CHANGE on the referenced Sales Order.
However the BAPI is unable to change the other sales order giving an error Enter the document number. I am specifying the Document Number while calling the BAPI, so I know that is not the error.
I just wish to know whether it is technically possible to call a BAPI to update another Sales Order while we are currently saving one Sales Order.

Hi Girish,
If it works correctly when run seperately and you are sure the data passed into the BAPI is exactly the same then it may be something like table locks or similar causing your original problems...
What about packaging up your working Z program into a custom function module and calling that from within USEREXIT_SAVE_DOCUMENT as a seperate task (IN NEW TASK) and building in a slight delay of say 5 seconds at the start of your code?
I'll be honest, this isn't an ideal solution but might be sufficient to resolve your issues. I'd be inclined to see if you could just run your Z program as a background process every 5 minutes or so to capture any changes and perform updates but if this is a no no from your functional people I'm not sure what else to suggest sorry. I've never personally had to update a document from within the save routine of another document so can't give any advice based on my own experiences sorry.
Gareth.

Sales Order Costing Error Log Display

When I look at Sales Order costing thru VA03 or when I run the Multi-level BOM costing for sales order CK87_99 I can not display the costing error log. I can generate the log thru VA02, but we need to limit the Sales Order change transaction to the Order Management group and did not want to give change order access to the product cost group.
Any options to get the costing error log from VA03?
Thanks

I cheeked OKY9 and the Update tab had the "Save Error Log" checked, but on the Misc tab the "Log Messages but do not save" on the error message field was selected. When I changed the selection to "Log and Save Message" this corrected my problem.
Your suggestion guided me in the right direction. Thanks,

Credit Check during Sales Order Change (VA02)

Hi,
We have implemented a credit management system, where the sales order will not get saved if the credit limit is exceeded. Now this check is working fine during sales order creation. But in VA02 during sales order change, the system is giving an information message that the credit limit is exceeded, but is allowing to save the order, which is not desirable. Could you all please help me in finding a solution to this problem..
Thanks & Regards,
Ritam Bera

Hi
Kindly check that you are using simple credit check or automatic credit check(Statis or Dynamaic) below settings
If Automatic credit check then go to OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group,Check in the reaction field you have mentioned the error or warning (B or A) .
Prerequisites for credit management to work in Sales and Distribution:
1.Assign credit control area to company code
2.Maintain the credit limit in FD32 with details of risk category and the credit limit value
3.Do the settings in OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group,Check in the reaction field you have mentioned the error or warning (B or A) .
4.Assign the credit groups to the sales and delivery document types.
5.Maintain the Subtotal 'A' in the pricing procedure against which value the sytem should check the credit limit.
If you have any further clarifications on above let me know
Regards
Damu

Credit status change through Sales order - change log

Hi Friends,
I'm currently facing a scenario were it was reported by the client that
credit release is happening automatically.
Brief details :
   Order was created on 4th Of Oct and it was blocked (reaches the VKM1 bucket )
   since the customer reaches the credit limit.The same order on 5th Oct was not in VKM1
   bucket were the status of order in Sales document header states that it's released.
Initial check : (Sales order change log)
1, I've checked the change log on 5th Oct were the field VBUK - CMGST "Overall status of credit checks changed" from B to A.
   (( Status and details below
      A - Credit check was executed and document is OK.
      B - Credit check was exectued and Document is not OK (credit block).
      C - Credit check was executed document not OK, Partial release.
      D- Document released by Sales representative. ))
2, I tried to replicate the order status for block and release, But when I release through VKM1 / VKM3
     the change logs are getting updated with Status - D .(ie from B to D) .
I'm wondering that what could be the reason that causes the system to update in the table - VBUK - CMGST from A to B
or because of what change from the client in the sales document header level could impact this changes.
Note - There is no payment which received from customer on that day.
Please let me know in case if you are getting the clue...
Thanks in Advance..
- Pugal stalin

Hi
A simple credit check, as the name suggests, is very simple in nature. The functionality is limited and considers only open A/R items and open items from special G/L and sales orders for performing the credit checks. When you create/change a sales order that is relevant for a simple credit check, SAP calculates the payer/customeru2019s credit exposure by adding the open A/R balance for the customer, open item balances from the special G/L, and the net sales order value. This credit exposure is then compared against the customer credit limit maintained in the customeru2019s credit master. If the credit exposure is greater than the credit limit, the system sets the credit check status as u201Cfailu201D and shows a warning, generates an error message, or performs a delivery block
Regards from Pakistan

Sales Order Confirmation Email in CRM

Hi Experts,
The requirement is to send an email as soon as the sales order is saved in CRM.
I am using action profile for this and in action profile i have used the following:
Time of processing: When saving the document
Assigned Processing: Smart forms Mail
Form Name: CRM_ORDER_CONFIRMATION_01
Processing Class: CL_DOC_PROCESSING_CRM_ORDER
Processing Method: CRM_ORDER_EXEC_SMART_FORM
I have made it partner dependent and its taking the email id mentioned in the sold to party as expected.
When i create a sales order and save it. I get the following error:
Error when sending to 'Email mentioned in sold to party'
Error during send process
Action could not be executed successfully.
Could you please assist me in this.
Thanks and Regards,
MG

Hello,
I believe the error which you are getting is displayed is the processing log in the action tab in CRmd_order.
Please do the following and let me know.
Can you check the SCOT ->SMTP settings in CRM system.?
Also go to SOST and check status. Please try tu push the mail from there.
Also, make sure that the email ID used in SP is allowed in the client domain.You can check this with the client basis team.
Hope this helps.
Regards
Sanjib

Report for Sales Order Change History CDPOS and CDHDR

How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
Helpful answer would be rewarded.
Regards
Praveen

Dear Praveen Kumar
Have you tried with VBAP where sale order details at item level would be stored.
Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level. Normally, any price increase / decrease would reflect in billing. So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing.
Thanks
G. Lakshmipathi

Sale Order changes View

Dear Guru's
Is there any T-Code for verifying Sale Order changes (Step wise), as in my company Invoices are generated with lot of changes which not matching with Sale Order conditions. So I would like to moniter the Sale Order conditions changes. Kindly help me out.
Thanks in advance

Hi
Sales order changes can be seen in the report only if the changes are made by any user(userid). If your problem is with changes in pricing conditons...then before comparing the sales orders and invoices, I advise you to check the copy controls and the price type used in the copy controls. If the price type selected is to redetermine the pricing, then you should check the validity of the conditon records. Sometimes, the conditon records may be different during sales order creation and invoice creation.
Thanks,
Ravi

Sale Order change BAPI - Storage loc not updated

Hi Everybody,
Iam using "BAPI_SALESORDER_CHANGE", to change the sale order items.
First iam calling above bapi with switch B, for new pricing & then second time for material change.
When i change any material number, it is getting updated correctly.
But the storage location, even though iam passing in the bapi it is not updated, & is blank - updation flag is also passed.
When i execute sale order change again it is updated - ie, for any material change for first bapi call, storage loc is not updated - for 2nd bapi call storage loc is updation - for same input in both the cases.
Is there any way to update the storage loc is first call of sales order change bapi.
Below is the parameters iam passing in bapi :
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT      = LS_SALESDOCUMENT
      ORDER_HEADER_IN    = LT_HEADER_IN
      ORDER_HEADER_INX   = LT_HEADER_X
    TABLES
      RETURN                            = LT_RETURN
      ORDER_ITEM_IN               = LT_ITEMS
      ORDER_ITEM_INX             = LT_ITEM_X
      ORDER_CFGS_REF          = LT_CFGS_REF
      ORDER_CFGS_INST         = LT_PARTS
      ORDER_CFGS_VALUE     = LT_VALUES
      ORDER_CFGS_BLOB        = LT_CUBLOB
      ORDER_CFGS_VK            = LT_CUVK
      ORDER_CFGS_REFINST   = LT_CUREF
      SCHEDULE_LINES            = LT_SCHEDULE_L
      SCHEDULE_LINESX         = LT_SCHEDULE_X
      ORDER_TEXT                   = LT_TEXT
      CONDITIONS_IN                = LT_CONDITION_L
      CONDITIONS_INX              = LT_CONDITION_X.
Any help is appreciated.
Regards,
Nagarajan.J

Hi,
Storage location is updated only when same sale order bapi is called another time with required details.
rgs,
Nagarajan J

Sales Orders Change Log question

Hi All,
I am currently working on a project that involves querying SAP Database to get custom reports via web browser, I've made a lot of advances and most of the site is ready but I'm missing just one item that I hope you could help me.
Thing is I am working with the Sales Order change log and the problem comes one a user deletes a row. If I go to the change log inside SAP and see the differences a new record will be shown saying that row X was deleted and
if I go to the database (ADOC and ADO1 tables) I don't have a way to see wich row was deleted.
My way of doing this is to check for the number of rows on the current state of the sales order and check the same on the previous instance of the SO and see if a line was deleted. Then I would have to check row by row between instances what rows are there and what row is missing and store that info. I think this kind of approach will definitively kill the server.
I was wondering if some one can give me a hint about how to approach this problem. Does any body know how SAP works on this area?
I'm working with SAP2005A and SQL Server 2005 Standard Edition.
Any help is greatly appreciated.
Thanks!
Alejandro.-

Hola Alejandro,
Thanks for your answer, as I see it I'm doing exactly what you proposed but the problem comes with the following scenarios:
a.- If I post a new SO with two lines I will have on the ADO1 table two records with the values 0 and 1 for each line respectively but if I delete the item on LineNum = 1 and then I add a new item, this last item will be also created with LineNum value = 1. This is not a complicated thing to do but the problem comes when the user is used to work with SOs with several items at detail level and is used to add and erase lines once in a while and as I see it it's very difficult for me to track those specific changes. There's also the fact that on the Log table a new instance is created every time the user hits the update button regardless if a modification was actually made or not. I mean I would know that a line was deleted or added but I would have to start comparing each field on each line of a sales order with it's previous instance to check what was actually added/deleted and I'm afraid that this may affect the server performance. I know that SAP does this without affecting to much the system resources and that is what I'm trying to find.
I forgot the other scenario I was considering he he I will post again as soon as I remember it but I hope I'm explaining this ok (I'm not very good at explaining...) If not let me know and I'll try to explain again.
I'm also working on trying to get another approach to see what comes up...
Thanks for checking this thread, your answers are helpful.
Regards.

Initial load of sales orders from R3 to CRM without statuses

1) Some sales orders were uploaded into CRM without statuses in the headers or line items.
2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no problem.
Any ideas or suggestions?
Thanks.

Hi,
   Request load of adapter objects uses different extractor modules for extracting the data from external system to CRM. While your initial load of sales docs. will use a different extraction logic bases on the filter conditions specfied on trx.
R3AC1
   There may be a problem in the extraction of data from the source system (don't know if you are using a R/3). Can you please de-register the R/3 (i suppose) outbound queue using trx.
SMQS
, and then debug the extraction (R/3 outbound) before the data is sent to CRM using FM
CRS_SEND_TO_SERVER
   If this goes well, you may try debugging the mapper in CRM inbound and the validation module in CRM as a last resort. Also, please refer to trx.
SMW01
to see if the Bdocs are fully processed.
Hope this helps...Reward if helpful.
Regards,
Sudipta.

How can I create a new sales order template in SAP CRM 7.0

Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvan

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

BAPI_SALESORDER_SIMULATE can be used in case of Sales Order Change?

Hi All,
I'm using FM 'BAPI_SALESORDER_CHANGE' to update sales order.
It's working fine even multiful item (delete, add, changing item).
But I need to give simulated information to SAP portal before changing Sales order.
This 'BAPI_SALESORDER_SIMULATE' FM looks like for creating new Sales Order.
Is there any other simulation BAPI FM for Sales order change?
Thanks.

Hi,
You can use
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
Thanks
Sarada

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Sales order change error in CRM

Similar Messages

Maybe you are looking for